2016-2019 Toyota Tacoma TRD Fender Flare Replacement (Remove and Install)

  Рет қаралды 27,602

Jesse Cortez

Jesse Cortez

2 жыл бұрын

I walk through the steps to replacing a factory front fender flare on a 2018 Toyota Tacoma TRD Pro. This video applies to 2016-2019 Tacoma TRD Sport, TRD Off-Road and TRD Pro.
Toyota Factory Part Numbers:
75871-04060: Right Front Fender Flare
75872-04060: Left Front Fender Flare
75873-04090: Right Rear Fender Flare
75874-04090: Left Rear Fender Flare
75395-35070: Orange Fender Flare Clips
75396-35020: Blue Fender Flare Clips
Amazon Orange and Blue Flare Clips: tinyurl.com/flareclips
Amazon 3M Foam Attachment Tape: tinyurl.com/3MFlaretape

Пікірлер: 40
@osamaabdelgader8348
@osamaabdelgader8348 Ай бұрын
Best fender flare video on YT thanks for the details
@Mudrucker2112
@Mudrucker2112 2 жыл бұрын
You have the most comprehensive fender flare video in my opinion. Nice work my friend.
@SBVegasAdventures
@SBVegasAdventures Жыл бұрын
EXCELLENT video!! I recently had a body shop screw up a simple 3rd Gen Tacoma fender flare replacement 3 times due to poor quality work. 4th time I will do it myself after watching your video so thanks for that!!!
@hockey.phil13
@hockey.phil13 Жыл бұрын
Excellent video! Thank you also for the links to the cips and flaretape.
@witchdoktor69
@witchdoktor69 21 күн бұрын
Those coloured pins go into the flare and then push onto the fender.
@davec.5204
@davec.5204 6 ай бұрын
Awesome video 👍🏼
@TacoDave19
@TacoDave19 2 жыл бұрын
Easiest way to get that 3M tape off, eraser wheel. I’ll be taking mine off, sanding them down smooth, then spraying them with bed liner and reusing them. More durable and a nice pop to the vehicle as well.
@gregoryeberly5302
@gregoryeberly5302 2 жыл бұрын
I was thinking about putting the orange & blue clips on the flare first and pushing the whole thing on
@whatwouldjessedo
@whatwouldjessedo 2 жыл бұрын
Hi Gregory, some of the clips require a twisting motion to be installed on the fender, and they require more force to be inserted into the fender than to be clipped into the flare. I would insert them in the fender first, but I think you have a good experiment to try; it might work just fine. Post your results, please!
@stevanrose7439
@stevanrose7439 10 ай бұрын
If you live in the rust belt you should spray fluid film in the holes 🕳️ of the fender while you have the flair off. Or something similar like wd40 for a water displacement. Give it plenty it won’t hurt a thing.
@MPGunther1
@MPGunther1 Жыл бұрын
👍
@mattpierce9409
@mattpierce9409 7 ай бұрын
On the one flare you removed in the video, one of the tabs on the front of the flare broke off. Were you able to remove the other 3 flares without breaking a tab? I’m gonna remove and reinstall the oem flares
@whatwouldjessedo
@whatwouldjessedo 7 ай бұрын
You just need to be careful to not break that tab when removing it. You might want to try to put that flare tab out of the fender hole rather than pulling on the flare at that point. It's pretty fragile actually. I wasn't being careful to preserve the flare since I was replacing it.
@LegSpreader1
@LegSpreader1 Жыл бұрын
How many rolls of 3M double tape is needed for the entire 4 fender flares
@whatwouldjessedo
@whatwouldjessedo Жыл бұрын
I think one roll should do it
@hectordelatrinidad7122
@hectordelatrinidad7122 Жыл бұрын
Great video! Where did you purchase the trd fender flare?
@whatwouldjessedo
@whatwouldjessedo Жыл бұрын
I bought the new flare from the Toyota dealership here in Honolulu. You can find them used on Ebay though.
@michaelfanelli1036
@michaelfanelli1036 2 жыл бұрын
Great video, Jesse. What is the name of the tape and what are the clips called, please.
@whatwouldjessedo
@whatwouldjessedo 2 жыл бұрын
Hi Michael, links to both are in the description.
@witchdoktor69
@witchdoktor69 21 күн бұрын
Next time.take off the wheel liner, and you will have no broken clips or broken pieces on the fender flare
@stancedtaco
@stancedtaco Жыл бұрын
Is replacing the clips necessary if none of the old ones are broken?
@whatwouldjessedo
@whatwouldjessedo Жыл бұрын
If the clips are in good condition then they can be definitely be reused.
@ferjacoboR
@ferjacoboR 5 ай бұрын
Where did you bought your fenders flare? share the link please nice video
@whatwouldjessedo
@whatwouldjessedo 5 ай бұрын
I bought the new flares from my local Toyota dealer.
@drrker
@drrker Жыл бұрын
how did you order the flares from the dealership ?? i’ve asked my local dealership twice and they told me they can’t order fender flares
@whatwouldjessedo
@whatwouldjessedo Жыл бұрын
The laziness and bad customer service of some Toyota dealerships is amazing sometimes. You can order them online from plenty of dealerships if your local dealer sucks. SparksParts has been a good source in my experience: www.sparksparts.com/oem-parts/toyota-fender-flare-right-front-7587104060
@siickxl3gacy
@siickxl3gacy Жыл бұрын
Are the factory flare consider smooth or textured ?
@danielmunoz128
@danielmunoz128 2 жыл бұрын
Got to do this on 21 trd pro. Some jerk hit me. 😞 how much was the oem flare?
@whatwouldjessedo
@whatwouldjessedo 2 жыл бұрын
I paid about $220 for it from the dealer here in Hawaii. You can get them for around $160 from some mainland online dealers like Sparks Parts, but the shipping to Hawaii was going to make the cost the same as buying it here. Also, check Ebay for good used one.
@rossdegreve5527
@rossdegreve5527 Жыл бұрын
@@whatwouldjessedo do they offer the flares painted to match the body?
@whatwouldjessedo
@whatwouldjessedo Жыл бұрын
@@rossdegreve5527 No, Toyota doesn’t offer them painted, but you can find used painted ones on Ebay.
@angelrizo7664
@angelrizo7664 2 жыл бұрын
Can you put 2005 clips on a 2019 tacoma ??
@whatwouldjessedo
@whatwouldjessedo 2 жыл бұрын
The clips I used are listed as being replacements for 2005+ Tacomas, so I would assume that you can.
@Drew-qz3cy
@Drew-qz3cy 5 ай бұрын
Does this work for any 3rd gen or does it stop at 2019
@henryscreations
@henryscreations 4 ай бұрын
🤡
@alecthenice8115
@alecthenice8115 Жыл бұрын
Do a black line of silicon and the tape won't make u mad anymore
@Gtwannabe
@Gtwannabe 4 ай бұрын
Rub it out with some lime or wd40😎
@donaldwilliams2270
@donaldwilliams2270 10 ай бұрын
So your saying , there is no way to remove the flair without all new fasteners
@whatwouldjessedo
@whatwouldjessedo 10 ай бұрын
No, I don’t think I ever said that. If your fasteners are in good shape, you can reuse them.
Always be more smart #shorts
00:32
Jin and Hattie
Рет қаралды 46 МЛН
I Can't Believe We Did This...
00:38
Stokes Twins
Рет қаралды 78 МЛН
1 or 2?🐄
00:12
Kan Andrey
Рет қаралды 43 МЛН
THEY made a RAINBOW M&M 🤩😳 LeoNata family #shorts
00:49
LeoNata Family
Рет қаралды 28 МЛН
How To Install 3rd Gen Toyota Tacoma FENDER FLARES!
10:52
Bros FOURR Speed
Рет қаралды 124 М.
9 Toyota Tacoma Hidden Features You’ll Actually Use
9:59
Jacob Henry Tacoma
Рет қаралды 857 М.
Hidden Buttons on the Toyota Tacoma
4:52
The Unrestricted
Рет қаралды 375 М.
How To Fix Tacoma Fender Flares | Cheap And Easy!
7:17
Outdoor Taco
Рет қаралды 21 М.
How to Remove or Replace Fender Flares | Toyota Tacoma
8:42
Tacomaholic
Рет қаралды 63 М.
How to Repair Scratches on your Car | Save Hundreds of Dollars
6:22
Thomas of All Trades
Рет қаралды 8 МЛН
Build Your Tacoma RIGHT the FIRST Time
7:27
TrailBuilt Off-Road
Рет қаралды 331 М.
Что делать, если отказали тормоза?
0:12
Драг рейсинг это легко! #automobile #dragrace #jzx100 #rdrc
0:35