Very clear and concise explanation. I wish all videos were like this one.

You sir, are amazing. Thank you so much for this, you taught me plumbing.

Divide your TDS reading by 17.1 so 213/17.1 = 12.46, so rounded is 13 Grains. Your setting should be about 4698 Gallons. That's a little big for the house. It will probably regen every 20+ days. Even a 32,000 grain system would work in your household.

This is the kind of vlogger that we should support, ❤

Hi everyone just wanna ask where can we put the drain if the drain is too far from the water softener? Can we just drain it on the ground?

This guy nailed it with the video. Clear instructions!

Great vid and I love it and your work style. However, with every transmission fluid change, do you have to change the pan and it comes with a kit? Also, I notice when I'm in neutral or just ideling - most of the time, it would say D2 and it freaks me out.

I just finished this project this afternoon, Mr. Bee! I got the all the gaskets and spark plugs replaced and everything put back together; took it for a test drive and everything is working! I greatly appreciate the videos; I couldn't have done this without your guidance. You successfully walked a 26 yr old girl through this, you should be proud of yourself. Thank you 🤗!

How tall is the unit?

Скажите пожалуйста у меня машина 147 тысяч миль проехала надо менять масло от коропки? спасибо огромное

?

В книге написано не надо менять масло или надо?

Здравствуйте на каропку Ниссан квест сколько литров масло надо ставить

Since the cover is off I would have blow off all the excess dust off the engine and wipe whatever I can since I'm under the hood. In general, you did a great job and thanks for the instruction and tips. I have the same '16 model and just about six days ago I went into the dealer for a Service B, which I did not wanted to and then the Aux battery decided to alarm and so I went in, they checked and said I needed to change the S-plugs. I saw the quote and decided to do it soon/later for I already paid $15xx. So, I just found your vid and would change the s-plugs myself. Not sure about the 'gapping' - what is that all about?

Hi, I spent a couple days following your video with my timing belt. The first time the marks were off because I couldn’t find the back mark to line up. I turned the car on, it ran, then there was a sound like a loose bolt and the car turned off. I took everything apart and started all over again making sure to line up each mark correctly. I couldn’t replace the water pump because the studs were stripped, but I changed everything else. Put everything back together still heard a sound as though a bolt was loose. The car will run then shut off. Now the lights turn on however the car will not start. Any ideas on what I can fix?

That's only half the job. 1. You forgot to drain about 4-5 liters from the wandler. In total, you only changed 30% of the oil. 2. Why did you clean the edges of the gearbox housing and then lubricate the gasket, it makes no sense. It's supposed to be dry there.

Thank you I used your video to install my system and it helped a lot!

Cuuuuuuuteee😊

How long did this last?

My wife's 2012 quest with 80k miles has a transmission that is acting terrible at 40mph. We've done a fluid service to it and it went away for a couple of months. Now it's bad again. And if you have the AC on, there's almost no power at 40mph. Revs itself to 2k, goes up to 5k trying to get out of gear at 40mpg. Any ideas?

HI HOW TO REMOVE A BROKEN BOLT FOR AC COMPRESSOR 2004 MERCEDES C180 K

Great video. Is this one a Cross-link Resin or Fine Mesh Resin model? Looking into upgrading to an Aquasure Harmony but not sure which one to choose and why.

Do u know how pong will work that ac conpressor?

Good job man 👨👏👏👍👍🫡🙏

Tx heaps, saved me a lot of $$$. Easy to DIY

Excellent video. Aquasures installation video is excellent, but this is the source video for getting the system initialized. Many thanks from hardwater Paradise Valley.

Dealer wants $1300 for service

Hi, I purchased a new house and it only came with a new aquasure water softener 48000 or 64000 there is just me and my wife.we have had egg smell ever since we bought it. The seller never hooked it up and I knew nothing about water softeners. Aquasure tech help told me to regen manually so for 6 months I kept doing it. The water hardness has been between 250 and 425ppm. In April of this year I added pre filter up and the sulfur eliminator.water hardness is still the same.I have been emailing back for weeks with Aquasure tech plumber, well company and sulfur eliminator people with the conclusion the softener tank may have lost most of the resin/is damaged Aquasure tech has me test regeneration and it is fine . Settings are at default 1000 gallons. My pressure tank went out, got new one. My sulfur eliminator runs water constantly because of the iron content. Everything I’ve tried hasn’t brought down the hardness at all. What do you think? Thanks

This oil will burn the clutches. Seconed gear requires some learning but can be mastered in a short amount of time. This guy is way off course. Stick with mobil one 20-50 v twin

bonjour merci pour la video 'ai des accoups apres la vidange de ma glc 2204matic avant la vidange tout se passait bien merci

Das ist Unprofessionell

Hi, what colour are they?

this is the best video of this i have ever seen, you just saved my ass with this, helll YEAH

2014, 110,000 miles, radiator flush once 5 years in transmission at 80k. Loaded up and driven hard, still going!

Awesome and very helpful video, Just wondering are you using Pex A or Pex B? Thanks

Where is the filter? I can’t find it

Jesus that was overdue.

Thanks a lot for the videos! How much coolant did you add in total?

Hey! Thanks for the video! Really appreciated. Just have a few questions. 1) In the video it seams as if you only used 5 quarts, I believe the kit comes with 10? Why is that? 2) What about the rear differential? Or the Torque Converter? Don’t we need to drain and refill them as well while doing this process? 3) From my understanding during the process once we fill the oil we need to switch the cap to position 2 so it leaks out the overfill if any, and we also need to do so after running the car so the transmission temperature is settled, I see you didn’t do any of that. So it’s not really necessary? Thanks 🙏🏼

1997 volvo 850 this work on

How do I program the key for a 2008 Toyota Highlander

One of the better videos I've ever seen. Job well done. Question: Is this the same 3.3 engine that's in my 2008 Toyota Highlander Hybrid? Thx

wow that was one of the best videos on how to do that

solid vid! i realize the drain hose is 1/2" but that must be OD.. I matched it up with 3/8" PEX and it seems to work well, do you know if that is acceptable if my drain hose is too short? I am dealing with a concrete floor and the drain is 15' away..

So where is actual auxiliary battery location

So where is actual auxiliary battery location

So where is the actual auxiliary battery location

Thanks very helpful😃

well done

By the way a small washer and o-ring goes with the pilot screw. I see the washer or o-ring fell onto the ground when you were spraying it off after you removed from the can. Not sure if you realized that or not.