An easy to follow DIY video tutorial on how to remove the tailgate on a 2019 - 2022 Ford Ranger.
More automotive tutorials available at www.programyou...
The Ford Ranger owners manual suggest the following steps to remove the tailgate and in-line connector for the backup camera:
1. Locate and disconnect the in-line connector. It is under the pickup box on the center right-hand side of the vehicle near the spare tire.
2. There is a protective cap in the glove box. Install it on the in-line connector that remains under the pickup box. (optional)
3. Partially lower the tailgate. Carefully feed the tailgate harness up through the gap between the pickup box and the bumper and place it out of the way under the Ranger pickup box.
4. Lower the Ranger tailgate.
5. Use a screwdriver to gently pry the spring clip on each connector past the head of the support screw. Disconnect the cable.
6. Disconnect the other cable.
7. Lift the tailgate to 45 degrees from horizontal.
8. Lift the right side off its hinge.
9. Lift the tailgate to 80 degrees from horizontal.
10. Remove the tailgate from the left side hinge by sliding it to the right.
Reverse the steps to reinstall the tailgate.
This tailgate removal procedure works on the following years of Ford Ranger
2019 Ford Ranger ( XL, XLT, Lariat )
2020 Ford Ranger ( XL, XLT, Lariat )
2021 Ford Ranger ( XL, XLT, Lariat )
2022 Ford Ranger ( XL, XLT, Lariat )