I've watched hundreds of car videos and your the first I've ever seen to cover plates and not in post. That's very smart and a huge time saver.

I just pulled my badge off. I parked the truck in the sun for about 5 minutes and then started to peel it with a squeegee similar to the one in the video. Once I got it off there was a bunch of glue left behind - like in the video. I used the heat of the sun and folded it back into itself just using my fingers. It all ended up in a ball and that was it - perfect! No scratched paint. Thanks for the video!!!

Sanding it will bond the adhesive really well. But it will make it harder to remove later on when you want to do it again.

Your vid was simple and straight forward, my rear emblem was pretty much the same and came of pretty easily. Getting the excess glue off was easier to just heat and roll with my fingers, gentle heat let me roll it without burning my fingers. Used just 91% alcohol to clean up the residue and replaced it WITHOUT sanding Thanks for your hints

Much easier than I thought. Thanks! 3:35 p.m. 6/19

Thank you, just bought a replacement emblem and had no idea how to put it on. Really helpful.

Excellent video - well filmed, with clear explanation of each step. Links to each product that you purchased will make this any next project. Thank you!

Definitely going to replace my old emblems now !! Super helpful, thanks !!

All u need is heavy monofilament fishing line. Snake it behind the decal which is held on with 3m VHB tape. Then “saw” the line back and forth behind the decal. Then remove any remaining adhesive with wd40

Thank you for the lesson, great job!

Thanks for the video. Will be removing my emblems soon for obvious reasons. Can't afford to sell so this is next best thing.

good one. I was able to do without heat gun. Thanks for the help! Appreciated!

You can also use lighter fluid to clean the residue. Also, if you can touch the inside of the skin where the emblem is, even with a stick, it would be recommended to push against it so that the metal grabs on better. Unsure how this tailgate is vs say a hatch back door.

IPA and a rag works really well with getting the glue off as well if you want a cheaper option

Good job, looks great. Need to do the same to my F250

Good video, plan on changing my emblems to black on my Expedition. Thanks

Hey thanks a lot for doing this video. I'm repainting my tailgate to get rid of some rust spots before they get too corrosive , and I was wondering what to do about the symbol. Now I see its not too bad to remove that I will order that. Thanks again appreciate it.

Fantastic job/ video... end result is fabulous

Hello, Thank You for the Video - Am very pleased with My Results...Love My Ford RANGER

When emblem off- spray a can of krown or fluid film into that tailgate if you live in the rust belt

Good job buddy. You going to have that truck looking new again if you keep replacing everything. LOL A tip I have done in the past on some emblems and other things attached with 2 sided tape is dental floss to remove them kind of use it like a saw between the mounting surface and the tape it does a pretty good job. Have a great week!!!

Well done, thanks, i will try it tomorrow

great job friend!

Looks good!

Brilliant vidio, many thanks ive just changed mine 😁

this vidoe was very helpfull. Tks.

Gonna try it today

My guy you sound like Paul Walker, damn missed already, and thanks for the tutorial man

Thanks for this I have the same truck!! even same color.

Don’t you worry - That Ford Glue is tuff stuff.

Great video. Denatured Alcohol is my go to goo and glue cleaner.

👍 thank for the video

Nice video 📹 👍

It's good to see how to remove and replace these emblems,..Thanks!

Use some high tensile fishing line works too!!

Hey thanks. About how far away did you hold your heat gun when you were melting the adhesive to remove the emblem.

EXCELLENT THANK YOU GOD BLESS YOU 🙌 🙏

NICE JOB....FORD TOUGH!!

thumbs up shared looking good great job

Awesome, looking to do this on my Ford Ranger so this helped a lot? I'm also wanting to upgrade my tires and rims. What size do you have on yours?

So can I do this also to the side Emblems? Yours is the first video where you did not take nothing apart, like some videos took the tailgate apart to take emblem off.

Do you know if it is the same process for the emblem with the back up cam on it?

I have a faded plate just like yours and a picked up a replacement on marketplace for cheap ...downside it doesn't have the sticky plate ... can I use the old logo inner plastic adhere plate with the new logo cover i have and glue it ?? any advice would be appreciated

If you don’t mind telling, where can I find those fender flares?

Awesome

Hi, My original one came off. What do I use (glue etc) to adhere it back on again.

Ford finally did something right with the new 2021 trucks, it’s on the front grill, they circled the problem

How do you put the tin emblem back in to the casing. But just fell out

Thank you sm,just wanted to put a different emblem on so my friends stop making fun of me

The sanding isn’t necessary at all. But looks good

what kind of shell do you have on your ranger?

I was looking at these emblems for sale on amazon and one of them uses screenshots from this video in their instructions lol

Is it the same way for a front emblem?

Are the new badges plastic or aluminum?

Fishing line works well to get the emblem off

Emblems link not available, anyone know of sure replacement part?

Cool I never knew it had screws, mine is a small old ranger with a small logo on the right side I dont think it has screws. At least ford uses good glue my logo is pretty worn out it's a 1997 but I'm gona wait till it completely fades or cracks or falls off lol btw your supposed to push pressure on any logo for at least 1 min and do not let it get wet for 48 hours the same for stickers.

Where to get emblems

FYI: Link to emblem on amazon doesn't work

Aight tubes

I refuse to replace mine. I like my Ford truck but they should provide replacement emblems for free.

👏🏽👏🏽👏🏽👍🏽

wonder if a hairdryer would work as good as the heat gun.

Do u think since it's so cold out that it may have been a good idea to heat the surface and the emblem ???

minus the sanding step and your good bud

Scotchbrite pad would be better I think.

The link is not working 😩

Job well done brother, I was just gonna try to rip her off lmfao.

Just asking, why cover the license plate? No one besides a cop has access to the ANY of the information on a license plate. I have an '06 F150 that I'm looking for the gen of F150 that uses the 9" oval that is three pieces so I can take it apart and paint it. I'm murdering the truck except for some accent pieces

There was no need sanding area!

but it still says Ford..

The emblem came off but the rest of it didn’t. 😭😭

Secondo te su la Kuga è ugualmente attaccato ..?!

I went on to your website. Couldn't find this part.... help?

What about I don't have a heat gun?

Hey bud you said you were going to put the email address for the Ford symbols I don't see it any chance you can send it to me or put it on here.

Just use fishing wire and floss it up and down until it comes off, and rubbing alcohol to clean. You are making this way harder than it needs to be.

Wouldn't Goo-gone be safer instead of lacquer thinner? That stuff is great when you need it.

Tape it off!

Why not just heat it and use fishing line? No disrespect, but this was an easy job. Try removing the rear emblem on a Ford Grand C-Max (I don´t know if that model exists in the USA) because on that model the emblem is mounted in some sort of "hole" with an edge all the way around so there is just NO way you can get anything behind the emblem

Jesus Christ is Lord ✝️ Maranatha

$15 for 2 Amazon, you bought fake rubbish that won’t last. Ford uk sell for £29 each. You’ll be changing again soon. 😂