The front fender is a lot nicer. I actually wondered why your bike looked better than the others I had seen. It really changes the overall looks. The other mods are also nice. Good job!

I bought the KLX 250 back in November of 05, its currently at 18,500 miles. I got the first one the dealership got in, in fact, I ordered it a month before they even got one. Did a few of the same mods, Utah skid plate, 13-45 from the stock 14-42 gears, airbox mod, jetting, and full Muzzy pipe. I got rid of the stock turns early on, but found that I wanted to be seen more in traffic, so long story short, I now have double turn signals on the bike. I also got rid of the low hanging plate holder for one off Rocky Mt. The first thing I actually did was mount the Pelican 1200 on the rack, best mod ever! The bike has been flawless for all these years, I will never get rid of mine. I also have 2 of the original large brochures from the dealer when I bought the bike. Love the Trackmaster tires, I have run the Kenda K270 and the Dunlop 606 a few times, but my money will go to the 760 tires from now on.

I'm in saint Marys, pa!! just picked mine up 2 weeks ago!! Loving the klx

Man that front fender makes the bike look so much more attractive. Nice.

Great eye for design, great taste in aesthetics!

I have Tusk everything I could change on my 250 and I love it, tusk makes a great product.

3/4 INCH THICK?! That’s one hell of a skid plate!

Well done iv just purchased a KLX 300R pick it up next week, regards Western Australia 🇦🇺

Loving mine so far. Great bike. More fun than I thought it would be. Lucky to get one. They are in really short supply.

Wow! KC that's the only word that came to mind, man you nailed it that even looks way better than it's counter part KLX300r off road. Not that Kawi needs any help selling these things but I think you sold a few for them, in fact in my neck of the woods most every dealer is (probably due to price) sold out! I would make one other mod that would make that thing the envy of a lot of bikers, E-bay sells an after market light that looks a lot like the KTM's, I put one on an '03 KLX300r I fixed up and it looked killer. I think many owners will pay you the greatest compliment including myself and emulate (copy cat ) your mods, that's a head turner for sure!

Wow, all that flare costs more than the bike price, but whatever makes you happy. I bought one yesterday and love it! Trying to research some luggage options. Ordered the Giant Loop Zigzag handlebar pouch.

KLR650 clutch cable is longer and works perfect. you are welcome

I got a pair of protaper high rise bars and my clutch cable was more than a few inches short so i ended up going to a local cable place in my town. if you end up going to a cable place like i did i recommend writing down the size the nuts have to be on each end so they put the right size on and not bigger.

Very very nice job! Great explanation….The little details make this great bike even better.

I love the bike, good job

Great video, and very tasteful mods.

Nice tasteful build. I take delivery of mine next week and am researching tires. Thanks for the info and happy riding my friend.

I want do exactly same if I end up getting the klx 300 , love how looks after work you did

you nailed the proper look!

Nice Video and very nice customized KLX for real hard use offroad.

Nice job with your bike ! I've owned many bikes back when I was younger but never a Kawasaki but I like these dual purpose bikes and this is what I would try next , thanks .

196lbs? Now that would be a helluva weight savings!

That looks lovely my my friend, I'm hoping to get one when they become available over here in the UK, a stable mate for my DT200R

Very very nice! I agree with your mods. Outstanding.

Great video. I'm undecided about this or the Honda CRF 300L. I think your mods have me leaning towards the KLX

Cool mods I like 'em. I would suggest some luggage later to carry stuff from perhaps Kriega or Nelson Rigg. I have a Yamaha XT250 dual sport and thinking of getting this bike in future. A factor is the KLX has a higher seat height for us shorter riders under five nine. Happy riding.

Nice! Looking forward to the comparison with the Suzuki. I'm looking to purchase a dual sport and these two are in the running.

The bike looks great! Nice job!

Very nice job. Super clean looking bike.

Watching this I kept saying to myself "boy that bike is familiar" and there it is we are both on the same Facebook page lol

👍 nicest one I’ve seen yet Time to go cover it with dust & mud 🤣

It looks great. Nice job. I'm really interested to find out how much low end torque you will gain with the sprocket changes. All I want is a 400, 450, or 500 dual sport with updated technology and decent service intervals. I think most people want the same thing, but the manufacturers just don't seem to hear us. Before anyone mentions the CRF450L or KTM, I have no interest in a $10K bike with 600 mile oil change intervals. I don't want a racing bike. The XR400 and DRZ400 are great bikes too, but I would like something that's a bit more updated. Actually, the XR400 was one of the best bikes I ever owned, but I don't really want to deal with a carb or a kick start anymore. Also, I already have two carbureted bikes so I'm ready for something else. I know a 300 doesn't have the torque of a 400, but since it's all we can get, I'm hoping that your gearing changes bump it up a bit without sacrificing too much top end. If it's acceptable, I may spring for the KLX300. Let us know how it feels.

Where did you get all the graphics for your bike it looks amazing. Just picked up the klx300r and yours is the inspiration

Nice job.

Nice looking bike great mods 👍🤟

Nicest looking green one i seen!

I don't know what Kawasaki was thinking with that rear fender.

All the money you immediately put into it, you should have just bought a bike you liked. 😂 j/k have fun with it.

Can you add a list of your addons and where to buy them in the description, your bike is REALY clean

Great job, beautiful bike 👌

The next thing is a 50 tooth rear sprocket and longer chain if you do more off road riding...

How much did the rim decals weigh? Just kidding, man... your bike looks fantastic

Can I just send you my bike and. Have you do the mods? You are very good at it. Nice JOB!

Looks awesome

I put on the 13T on my 2021 KLX300 and loved the added lower end and still felt it had good top end on the hwy. I then added the 42T as well and didn’t like how it effected the top end. Felt like I was wrapping it out just to get to 65mph so I put the 40T back on. Have you tried the 42T yet?

I noticed in one of your other videos you have a different rear fender. Love it! What’s the setup? I’d like to get the same one.

Looks sharp!! Surprised you kepft Stock footpegs. Im gettin a 2023. Wht were ur thoughts on the honda 300 L?

Nice bike! Have the swing arm stickers held up well? Where did you buy them?

Looks nice, especially the vinyl additions, its the small things that give it that over all finish. Speaking of the small things, what did you use to cover the screws when you removed the little zipper bag behind the seat?

I don't like the stock front fender that comes on the dual sport either and was about to replace mine. Any reason you went with the KX 450 instead of just getting the klx300r version? Yours looks great, I'm just wondering since I was just about to pull the trigger on the 300r fender assuming that's what you did (until I rewatched this vid).

Nice video! Do you have the part number for that lithium battery? Do you see any disadvantages to the lithium?

I have a deposit down on a 22, KLX 300 and on a Husqvarna 350 FE, the Husky is slated to come in first but I wonder is the price savings and mod availability is with waiting for the Kawi.

Great video sir. Very nice. In your opinion. Could you rate the CRF250L to your new Kawi please and thank you?

Where did you buy your decal/graphic package for the swing arm, front fork extension, back swing arm? Looks really good. Have the same bike and looking to bring a fresh look to it.

I cut off my rear fender mess last night on my 2022 300, but I like what you ended up with better. Currently pondering the best exhaust solution, mostly for power, low noise and spark arrester so will be interested in what you came or come up with? Having come off a WR450F I'm kinda missing the throttle a bit, specially lifting the wheel over a down trees but still love the bike. The 450 was like riding a saw horse with a V8 engine, but worked well in my younger years.

I don’t think 3/4” skid plates are common or even desirable. I have a couple out in the garage if I get off my rear I’ll measure them.

How did you remount the controls on bars ? The OEM bars have the hole for the controls. Did you drill or just cut notch in control ?

Nice bike! Where did yoj gdt the fork guard ddcal? Was it for a klx or kx?

I like some of the black-out you did on the forks, side panels and swing-arm. Lots of silver and white otherwise. Did you buy the Kawasaki decals someplace that you put on the swing-arm, or make them up yourself? If someone sells them, who would that be? Where the black added to the side panels in a kit, or did you make those up yourself? Thanks.

Good job!

Nice mods! Just curious, did the KX 450 front fender require any modifications to fit?

Subscribed!! Nice bike. Do you know if there is any difference between the 2021 and 2023? I'm looking at a used 21 and new 23.

Nice tip on the front fender! Could you please tell us where did you get the rear fender shown on your recent videos?

Just need better foot pegs was the first upgrade I did

that skid plate allows a lot of mini rock nailing the engine, just be prepared for that

Hey KC...I installed the fender eliminator by TST Industries with the fixed, standard license plate mount. I noticed your license plate mount is angled and pretty far away from the exhaust. How did you know to set it up like that? My license plate is like three inches from the exhaust and the exhaust gases are hitting it... making a noise. I wish I had ordered the angled license plate mount.

What size Trakmaster ll tires did fit on your bike? I’m ready to upgrade from stockers.

Just got my KLX 300 also 👍 can you give me a link to the black decals you have on the side panels and near the number plate? I looked around a bit but can’t find any that are solid black like yours..

On Rocky Mountain ATV now doing some shopping. Trying to make my bike look pretty much like yours since I love how yours looks. I couldn’t find the Kawasaki decals for the swing arm and forks though! Could you link those for me? Thanks brother!!

Where did you get the 's' in '300s'? I wasn't aware they made a 300s. They make a 230s which is the lowered model.

Any benefits or pros and cons of getting a 300R and making it street legal if you live in a state where it is easy to convert? Enjoy your videos thx! Small differences between them but I think the suspension may be a bit better IDK.

Was wondering if you had a link for the the fork guard decals and swung arm decals looks sharp

Do you have a video of installing the polisport taillight kit? I’m looking to buy this just wondering how are you attached it and if you modified it at all..

Have you switched out the rear fender since this video? I am looking at replacing mine because I can't stand the look of it!

Is this the off road version that was street legalized, or is the the street model that was made more dirt worthy?

Do you have a link to the plugs you used to plug up the holes on the rear fender after you removed the tool bag ?

How much you got in the total package? I love the bike great video!

Thanks for the video. Was skid plate for KLX250? So compatible for KLX300?

In your opinion is it worth switching to this bike from a drz400 if I'm just wanting something with a lower seat height/lighter weight?

I hate the deep curve in the seat

Front footpegs too small?

There’s been many complaints with the foot pegs are you keep in the stock ones?

It is a good-looking bike, I am very interested in it, my dealer is selling them for 6k and probably try to rob me with stealer fees.

If you didn’t like the bike to start with, then why not shop around a bit more? Just saying. I have the camo version and when I decide I don’t like it anymore, I will probably go KTM or Husky. Fortunately I am very happy with my bike.

Can I ask the brand/style description of this skid plate if I search for it?

I really like the Mods to your bike! I ordered a new Polisport front fender fitted for the 2022 K450 x, but it will not fit. Did I get the wrong fender?

Dang you traded your Honda for a kawasaki must be rough

Did you use car vinyl wrap or just sticker vinyl?

Lol 3/4 inch skid plate huh, 3/8 maybe at best.

Hey KC, I bought the acerebis kx450 front fender. Did you have to drill new holes? If not, how did you do it?

Question for you, I have caught holy hell putting my bark busters on today!! Basically the aftermarket throttle tube I bought doesn’t work with the POS factory throttle tube housing that came with the Kawasaki. The factory grip was literally formed onto the factory throttle tube, I couldn’t cut it and tear it off so basically I put it to a bench grinder and grinder the rubber off it just so I could put another grip on it and still use the factory throttle tube. Any suggestion on throttle tube and housing? Flipping pain in the a**!!!!! I have a 2020 btw

Anyone know if there are aftermarket gas tanks of 3 or 4 gallons ?

I HAVE LOOKED EVERY WERE ON LINE FOR THE MICHELIN AC 10 FRONT TIRE AND CAN NOT FIND IT !! THE REAR WAS NO PROBLEM. ANY TIPS??

Ditch the muffler

Just out curiosity, why the Kawi over the Honda?

Where did you get the decals?

Where did you get the side number plate graphic

Do you have a link for the front fender? What brand is it? Thank you.

Where do I find the front signal lights

Where can I get wraps for my forks?