Рет қаралды 2,039
Unboxing and installation video of the Thrashin Supply 9.5" Pull Back risers, solid bushings, and high bend bars on my 2024 Harley Davidson Road Glide. in this video I show you that if I can do this anyone can. the video will have chapters if watching from a PC so you can skip to any particular section you are interested in. below I have linked the video's done by @THRASHIN and @2LaneLife of the same installation that I mentioned in my video. Also below is a link to the bundle that 2LaneLife offers for the set up I did (I did not do the throttle tube). Thanks for watching and always ride safe.
@2LaneLife video: • How to Install Handleb...
@THRASHIN video: • Fast & Easy Upgrades O...
Link to the parts I did:
2lanelife.com/collections/202...
Video content:
0:00 - Intro and unboxing
5:00 - First and second steps with background
5:52 - the 2 ways to do this job and how to choose which one is right for you
6:47 - Remove the brake and clutch levers
7:20 - unplug the wiring harness
7:56 - The other things you need to disconnect from the stock risers
9:09 - Remove the stock bars
11:29 - Remove controls, grips, and wiring harness from stock bars begin removing stock riser bolts
13:44 - Installing wiring harness in new bars
19:32 - finish removing stock risers and bushings
19:58 - Install new bushings and risers
21:08 - Install control module, grips, and reconnect the wiring harness to them on new bars
23:05 - Install new bars on risers
24:32 - Install Brake and clutch levers
27:00 - Install plastic cover
27:59 - Finished install and start up
28:38 - Outro