Today is 1/20/21.... primers, bullets, and powder .... are only available from the saddle bags on that herd of unicorns that just ran down the street. That is why I'm watching a reloading video from your library. Seems to be the only way to enjoy the hobby.... livin' in the past!!

I ran the 70 grain Nosler RDFs with 23.5gr of Varget and they shot 5 shots at a 1/2 inch at 100 yards and about 1.4 inches at 200 yards. I was super happy with the results. The 69 SMKs were also about the same.

Like you said it’s good to see those dramatic differences sometimes when varying one component in the load recipe. Definitely fuels the fire to keep us searching for those ultimate reloads!

Love my 8208!! Just want to add how much I enjoy your videos thanks Johnny

Another great video Johnny! I agree with Ron K about the position of the Chrono and angle of light. Still a pretty good comparison. I wouldn't mind seeing a few rounds with the AA2520 just to see how it groups. I also liked that you started with the brass trimmed and no crimps. Keeping everything consistent except the powder is the perfect test. I used to crimp about everything I was going to shoot in a semi-auto but after seeing your videos, I crimp less often. Keep the videos coming! I have learned so much from watching and can't wait for more .224 Valkyrie! Great job!

Dude,love the .223/5.56 series you ROCK JOHNNY!!!...

Hey nice I have wondered about my cheap chronograph. I'd it would give good measurements and everything and I guess i need not worry. And good to see ya back I've turned into a Johnny's Reloading Bench junky I guess every couple hours I look to see if you've posted a new video or not lol bit I really enjoy your stuff and keep it coming brother

I really like your format, how you share all the main specs of your loads, etc. Great Job Bro. Might be interesting to measure the bullet jump to your lands for your gun and adjust the O.A.L. for your gun with your best IMR load and see the differences that makes... Further refine that .5 moa group. See what happens. Be sure to leave a jump. Don't seat against the lands, that's dangerous. But varying your jump seems to be the next step in achieving your accuracy.

Johnny, found your review very through and informative. So. I subcribed...

Thanks for the video and different grains of bullet

That last group of 820XBR was looking great. I might get some of these in my local Cabelas and tryout cfe223 and AR comp

Mirrors my experience with Nosler projectiles. Want to get all the variation out? First weight sort the projectiles. Second base to ogive with the Stony. It's a benchrest sickness.

Love some 8208 XBR!!

Love the 8208!

Awesome I ordered some gust last Friday and i have some xbr.

Another good video.

I would love to see these tested with ramshot TAC and alliant power pro 2000mr. Thanks for all the work you put into these vids, I know its a lot!

I tried working up a load with these and Ramshot TAC, but couldn't get it to group well... I had high hopes... Glad to see that 8208 XBR, gives me some hope. Would love to see some additional powders.

I'd be shocked if you saw pressure

The newer smk that have been pointed from the factory are very similar, they have very small openings in the meplat.

Morning buddy. Interesting video. A lot too leaned over your videos thanks buddy. ATB

since i started loading berger vld's, i had to buy a vld-specific die - i use redding. i also use it for any other bullet with a secant style ogive (hornady vmax, barnes tac lr, berger vld, etc). they say you can use it for tangent style ogive bullets, but if you use it on a compressed load it will put a ring on the ogive. it's easy enough to swap out the seater from one to the other though

I've seen you run out of OAL adj before. If you have a longer cartridge die set, simply swap seating punches. Example: 30-06 & 308. Also 22-250 & 223. The longer cartridge will have the extra length you need.

I know this is an old video but if it were my horse to ride, I would take the 22.9 charge and very the seating depth and see if you can tighten the group. That 10 fps standard deviation was to good to leave on the table. I would also investigate 22.8 and 23.0. Also, when it comes to the 23.5 grain charge, the area of 23.6 grains is in a none accuracy node for 77/75 class bullets. Seeing what 23.4 and 23.6 do would be a worthwhile experiment. As usual, love your content.

It would be awesome to see you work up a load for an AR pistol. Could be a great series to see a pistol plinking load and another load worked out for accuracy

The lighting makes a difference with the Caldwell. The newer models come with LED shades that provide the light.

i second the 7.62x39 request, i have a factory proclaimed sub MOA AK variant and id love to see some good data both for groups and hunting loads. you're the master by the way!

XBR 8208 and RL15 are my go to powders. I would be trying RL15... I couldn't get the velocity out of XBR 8208 that I could with RL15. Once I loaded 55gr Hornady SP w/xbr8208 it came around.

More grendel please love the videos keep then coming

Johnny ! Love the channel. Glad we have your passion . But have ask , why did you use that cheap little scale and a powder scoop? Does it work that well? Thanks again jp

Would like to see this again with AR-Comp & PowerPro2000-MR --- {Please} I have used my 69TMK data for this round. Still experimenting. All in all another great video from Johnny.

I shot a best group Saturday with 22.8gr TAC and the 70gr RDF. The velocity was 2685fps in my 24" Varmint. I think the variation in the Caldwell chrono depends on the positioning of the sensors and perhaps a slight angle of the two sun shades.

Wow, whoray for 8208

Nice video. Can’t wait for some more 224 Valkyrie!

I'd like to see these bullets used with AR-Comp, Varget, and Power Pro 2000MR. 4064 would be interesting too if you want an even number.

I'd love to see the 175 grain RDF's in that 308.

I'd like to see you try some blc2 or cfe 223. They are almost the same powder so either would be cool to see maybe with some other random powder.

Is their any chance that the chronograph attached to the barrel could throw off barrel harmonics?

@ JRB: Shoot some Varget! I shoot the 70gr Berger VLDs over 24.8gr (Berger's stated maximum with 0 pressure signs, could probably go another .3gr or so) in a 24" barrel for a velocity of 2925fps which gives me 0.3-0.4 MOA if I do my part. Just loaded up some RDF's working up to the same max charge but haven't had a chance to shoot them yet. Would love to see how your WOA barrel shoots the RDF's with Varget.

Johnny, have you shot any of the 70 gr semi pointed Speer bullets? I'm thinking about ordering them for my TC Compass .223, but I'm not sure if a <a href="#" class="seekto" data-time="69">1:9</a> will stabalize.

Kotaboy 32 tactical sent me over wow you do have a great station I am a new sub just thank kottaboy32

Johnny, try the 175 grain Nosler RDF in your M5 308 build. I worked up a load with IMR 4064 that was shooting super well out of my 24-inch Criterion barrel (Fulton Armory Criterion Barrel)

Thanks for all the great vids..Ive learned a ton from you. Would you consider doing some work with the 24-45 Sharps round? I think you can load it into the 223 brass and just switch the upper. Reloadin might be a cheap option to get a heavier bullet. Any way..keep up the good work

Good content sir thank you. I picked up 100ct .224 70gr RDF at Nosler today I will try these in a 16" RH <a href="#" class="seekto" data-time="68">1:8</a> 5 groove with a Wylde chamber. I spent some time with a Nosler tech regarding this bullet in a AR platform these should work well with 1.750" brass for a COAL of 2.255-2.260". I have Varget, IMR 8208, Accurate 2495 and H-4895 to try with these bullets. my RCBS and Hornady seating dies will work with this Ogive. I hope you get a chance to try Accurate 2495 with similar weight bullets, I like IMR 8208 but it is hard to find in my parts.

I was wondering how often you clean your gas tubes? I try to clean mine about every 1000 rounds. I have noticed a difference in the gas pulse when I do.

I’d like to see the 70RDF with H4895. I shot it with Varget and accuracy was poor until it was pushed very hard and heavily compressed. Even then it wasn’t stunning. My optical chrono would do the same things as yours depending on the lighting conditions. It always read higher on cloudy days. PS, we need a hot 6mm on the channel. Grab-a-Gun has the RPR in 6 Creed for 799 ;)

JRB, if you are going to swap scope between Valkyrie and 223, note the zero markings for the 223, then do the same when you swap to Valkyrie. When you go back and forth, if properly torqued down, you should be very close to your marked settings for each caliber.

I was reading on Caldwell cause you inspired me to want one cause so cheep thou price is up bit right now and I am brock. and it stats in some forums sun light can create you reason one day it dose it one way and the other day was not same. looks nice for cheep thou.. for like me that not use it a lot.

i miss 300 blackout videos...

Wouldn’t mind seeing how Varget does with the heavier 223 bullets.

Did u get 2 seating stems with your 6.5 creedmoor hornady dies Johnny?

Hey Johnny do you know anywhere to get BR2 primers my local supply is gone

Thoughts on lee 223 dies? Everyone says get the factory crimp die, what about the whole set?

AR Comp and the 70 gr. Nosler would be a nice combination..

Does using different year headstamp with the Lake City brass make a difference in accuracy?

What are your barrel twist rates in .223 and 6.5?

The 70Gr Nosler RDF got my attention with the stated BC of .416, the Sierra 77TMK has a stated BC of .420, My thoughts were 77gr BC with 69gr velocities, should keep me supersonic at 900 yards. Just wondering if any viewers have any experience or thoughts on this.

i just ran a test of these last weekend out my almost identical spr setup, running tac off the same ladder i ran 69 TMK , ran into pressure issues at 23.8 grains split a case neck mv was like 2850 accuracy was horrible definitely looking for an accurate load for this

RDF Bullet with Varget

Boltaktion gun, your ar style gun is holding you back..

Like to see it with CFE223

Any plans to test the Hornady 73 ELD-M?

I know it’s an old video, do you always use the CCI 41? I typically use the 400. I not to knowledgeable on primers. What do you think?

Always wear eye protection when you’re testing loads ! 😮

I wonder if VV N530 or N540 will be Black Hills MK262 perfect match?

Varget Powder Please & Thanks, Keep up the hard work .

According to my modern reloading manul by Richard lee 2nd edition. 70 grn jacketed bullet.startiing chg for 8208 20.0 grns max chg 21.8 grns. Min oal 2.140. all this can be found on pg.318.hope this helps

I bet I got the same batch of LC brass. Brassbombers?

I’m getting an uncomfortable feeling ball power accuracy sucks in AR 223? Am I wrong in thinking extruded broadly out performs ball powder as a category?

With that heavy of a bullet what is the twist rate of the barrel

More Benchmark More Benchmark...LOL..Thank's

i have found my Caldwell chrono will give me better data when shooting distance. 600 plus

8208 xbr!

The only primers we can get her CCI 400 and federal 205 small rifle primers

can u get more fps using 5.56 case or does lapua not make 5.56 nato brass?

Ever plan on getting (or do you have) anything that fires 7.62x39? I'd love to see some accuracy squeezing from the master!

Will the 8208 XBR powder work with the 6.5 Creedmoor? Seems like really consistant powder.

Brb u may wanna try the 55g sp w/ cannelure varmint, SPBT design product#2266 from hornady. ive gotten the best accuracy of any 55g bullet. with these HORNADY 55g SP bullets seated to cannelure oal @ 2.185" in LC brass trimmed to 1.750" loaded w/ 26g AR-COMP & Win sr primers in crazy 20-30mph swirling wind gusts i was shooting around just under 1"@100 on average .935" 5 shot groups off a concrete table w/16" 556 an ar15 that was rock in the gov profile stainless freedom barrel upper assy with the a2 sight and midlenth gassystem/round plastc handguard on a anderson lower and a 4x simmons shotgun scope on top, funny right! I then proceeded to bang steel w/ 3shot groups at 100yd increments in order 2,3,4,5 out to 600yds well hears where is gets good. All the 3 shot groups where less than spectacular as i say the wind sucked bad and i was realy just trying to get a feel for the gail force swirling cyclone throwing bullet swatter. But after the first 3shot group at 6 to verify my hold and affects of the wind, i could literally see the wind changing direction from left to rt and back to left via flags every 100yds. I proceeded to put 15 of the rounds into a what ill say was no bigger than 7" more like 6.5" but ill go with 7 for arguments sake shooting painted steel. I can't freakin wait till I get a day with little to no wind. Hell im excited to see how the load shoots out my other rifles now. 55g Soft points out of a bottom shelf ar15 shooting ridiculously well, better than it ever should in that sort of weather. who knew. I almost left when i got to the range and saw how bad the wind was, its was twice as bad as I thought it would be goin by how it felt when i left my house I figured maybe 10mph. I was way off.

Has anyone seen the new Lee auto breech progressive press that will be available in April? I know Midsouth Shooter Supply has them available for back order, just wanting to see what people think about if it will be a practical press. It has 4 stations that will use the Lee breech lock system where you set the dies in the breech lock and will not have to reposition them when changing dies without having to change the entire die plate on top.

Hi Im from Australia and I'm looking at trying to Nosler 70 gr RDF for 223 Remington and was wondering why you chose to do 2.260 inch for the overall length

Like to see how they do with TAC

Lapua brass CCI 450 24.0 gr 8208 xbr 70 nosler rdf

Which chrono was which in the graph?

What's the word on the AR-10 build?

CFE223!

Sages reloading supply, best place for lake city brass, 2 day shipping

Groups dont mean squat at 100 yards. Its the lower sd that matter.

why not measure length from ogive to maintain off the lands accuracy.

Could you try ar comp and accurate 2520 might work pretty good, thanks for these videos they're very helpful.

why you struggled with the seating depth is because of this; Bullet O'Give Nosler 70gr. .500 Sierra 69gr .520 Lupua 69gr .555 Hornady 68gr. .585

someone please link me his scale i need a good one please?

Has anyone loaded it on a Blaser R8 10 twist .223?

I swear for the life of me, I cannot get my mind around how a powder can affect accuracy. I suppose a smoother initial drive push could help but other than that I just can’t figure it out.

70rdf with cfe223

Was watching a show called shooter and on the last episode of 1st season a guy blows his face off from overloaded case....u need to work that graphic in

Never understand why the Military doesn't use these high BC bullets for our soldiers Ammunition. Sure it'll cost more but compared to an aircraft carrier is it that much?

I don't get the point of trying to push a bullet beyond its capability. I would say a little over a half inch group is pretty good for a semi auto.

Bring audio up a touch

RL15

try a favorite RL7