I've used Ramshot for years and really like it. When it first came out (made in Montana?) I bought 3 cases. So, I'm still shooting the original powder and maybe it's formulated differently now. It was so new, I called and worked up 7mm-08 loads using TAC for my daughter's rifle when we were going to Africa. It consistently shot small groups and obtained 100 fps more on the average than any other powder I tried. I just got thru using TAC in my .358 Win using 200gr Horn RN bullets. I shot a whole bunch of 5&6 shot groups. All 1/2" t 3/4" 100yds.

“My dog at my homework”. It was windy. Barometric pressure was pulsing, full moon during the day, spiraling winds, barrel shrunk in the cold squeezing bullets into the lands. Cold warping scope...... that’s why you had flyers😂😂😂😂😂

I just loaded those projectiles for the first time, too. I have to say, they worked great near mid-way up the ladder for Tac and XBR. Even better near the top of varget.

Well den,,,, I just bought a pound of X Terminator today on an impulse of the cheap price and reading that it would be suited to .222 Remington. I have not researched this powder prior to the purchase. Disappointing to see your first groups and to hear that it’s sensitive to cold temps since most of my shooting takes place in the winter. I’m gonna give it a go on .222 with 50 grain Speer PSP bullets working up to right around 3100 FPS, according to good accuracy that is, and see what happens.

Yoooo. Whats up. Just tried a cup of vinegar with soap and lemi in my wet tumbledoor on some 9mm the were flooded in salt water (1foot of water in my dad room swfl). Had tumble them for hours and wrote them iff as scrap. Let me tell you, it is on par with the best result I’ve seen in normal brass. I got my 1100 9mm Done this week (1000 was the goal) Also found some nickel 5.56 cases. That’s the delay in shipping 😂

Hot rod em ...😎...with the A2230 I believe I'm at 24.6 if memory serves

Good stuff. Thanks for posting

For me CCI Magnum primers do well with the double base ball powders. But I suppose any magnum primers would do the job. Back the charge back down just a touch if you try it.

Try 23.6gr. of X-Terminator Terminator with a 55gr. At 2.2365 oal.

I use mostly Accurate/ Ramshot. Always lowest grains of powder with highest chamber pressure. Usually followed by living in the higher spectrum of fps

I was thinking at the beginning of the video my plinker is with AA2230 🤣 I do the small base too so let haters hate 😎

Very nice! Have you tried the Hammond Game Getter? It uses a nail gun blank to fire swaged round balls

For me it's Hornady 55gr Fmj with Sellior and Beloit srp, LC brass and Shooters world Ar Plus.. 25.5 grs

Good job

Im thinking the AcC 2460, 2200 have been decent for groups. Many 1/2 moa @50. Have seen 3 shots sub moa @200. Do not ask me to do that again

A 'flyer' or 2 in every group...could that equate to variances in Berry's bullets? I use Berry's .456 230 grain (P) bullets for my 45ACP and those are pretty good shooters. I have not tried their .224 55 grain bullets. Looking forward to seeing more testing with these bullets.

I mean if you are going to shoot steel, it does the job. I would not complain

Try a compressed charge with ZIP😂😂😂😂. No jk. Don’t 💥

Are the groups really gross???

Excuse, it's the junk bullets. Try using Ramshot load data, 22.4grs is the starting load not what yours are.

Geez! First using red and green powder out of season and now yer gonna exterminate rams by shootin' 'em with plinking loads! Ain't you got no sense?

❤❤❤😂😢🎉

Another dude heavely influenced be " South Park "