#228

Рет қаралды 36,251

KAMi JUINs

Ай бұрын

INSTA - / kamijuins
E-mail - j3i3s3@gmail.com

Пікірлер: 139

@KAMiJUINs Ай бұрын

It's been a while since I've put my passion into it. I'm also looking forward to seeing it completed ASAP :) 오랜만에 열정을 쏟았습니다. 저도 빨리 완성되길 기대하고 있습니다.

@SRNAR8 Ай бұрын

Looks sick! I have a question, what do you do with the boards you get for reviews but don't have space to keep? Also, are you based near Seoul?

@dkwyit1 Ай бұрын

I've coined him the "BRUCE WAYNE" of eskate. He has us all in shock and awe with his engineering and radicological approach.NuttyDr.Jekel Proffessor Hyde. He gets the Einstein-FrankenBorder award too. Aloha Kami

@KAMiJUINs Ай бұрын

Aloha!!! Thank you for saying that and watching too :)

@willmc6728 Ай бұрын

Looks cool. Can't wait to see you test them. A new challenge is vital for body, soul and mind

@KAMiJUINs Ай бұрын

Thank you for saying that and watching :)

@DanielKwan Ай бұрын

How do your table and stuff remain so white??

@KAMiJUINs Ай бұрын

I guess I have a mysophobia. lol :) Thank you for coming bro!

@ssoffshore5111 Ай бұрын

Awesome! Suggestion... rather than using those flat-ish wide wheels, I believe you'd have better luck with a rounded wheel profile. Obviously larger wheels will make them smoother over rougher surfaces. I would think something like the original CloudWheels 120mm would be a great fit for these skates if they fit, or something a little smaller with that rounded profile. Your turning will be far smoother and more effortless.

@KAMiJUINs Ай бұрын

Thank you for watching! Ok, I agree with the wheel you said about the turn. But on the other hand, these skates will be heavy, and because these skates can easily accelerate and achieve high speeds, I think stability is more important than anything else. So I tried this wheel :)

@ssoffshore5111 Ай бұрын

@@KAMiJUINs I'm sure you'll end up testing different wheels, if so, let us know what you find!

@KAMiJUINs Ай бұрын

I got it!

@worachart111 Ай бұрын

Wow this is a interesting diy build E-Inline sk8 and perfect material selection for a prototype build

@KAMiJUINs Ай бұрын

Thank you for saying that bro :)

@ARCEYE78 Ай бұрын

Absolute lunacy, I love it, well done, I look forward to you pushing these to the limits.

@KAMiJUINs Ай бұрын

Thank you for watching :)

@GNARGNARHEAD Ай бұрын

so hyped for part two of this 😆got me watching Air Gear

@ElectricCarves Ай бұрын

Woah! Can’t wait to see the ride 😅

@KAMiJUINs Ай бұрын

Thank you for coming brother :)

@eBoard3R Ай бұрын

*Omg you built one!!* 😲 ⚡️🤟🏽⚡️ Is there anythin you can't build 🔥🔥 Omg you used Mad Wheelz and belt drive for electric rollerskate build! 🤩🤩 I would love to see how you plan the builds, fully or partially plan. All the little sounds, I'm not into ASMR but I love the sounds in your build videos bro. Amazin build video, no-one builds AND films/edits it together as good as this. I don't rollerskate, scared of the electric ones but This one I would ride, you are a "Mad" scientist bro 🔥 I am Sooo lookin forward to the ride video!!

@KAMiJUINs Ай бұрын

Thank you for saying that and watching. Bro :) First of all, I imagine a lot about what might be possible. Then, once my thoughts are somewhat organized, I spend some time looking for the parts. And when the actual parts are gathered, simulation work is done, and if it seems possible, DIY work begins. This is the DIY process that I usually run. And I'm looking forward to it too!!!

@alecsisk Ай бұрын

Awesome! Wait for part2 and tube wheels for bad roads :)

@KAMiJUINs Ай бұрын

Thank you for watching :)

@esk8jaimes Ай бұрын

Looks great!

@KAMiJUINs Ай бұрын

Thank you for watching bro :)

@rodrigolozanolucianez37 Ай бұрын

Your projects are amazing, such a great engineer

@KAMiJUINs Ай бұрын

Thank you for saying that :)

@noka7776 Ай бұрын

bro that is cool, can't wait for part 2!!!

@KAMiJUINs Ай бұрын

Thank you for watching :)

@esk8omg Ай бұрын

Alright, now that's pretty cool.

@KAMiJUINs Ай бұрын

Thank you for coming mate :)

@loklokey7882 Ай бұрын

U make it seem so easy to Make.im looking forward to see how it rides.😊

@KAMiJUINs Ай бұрын

비디오에서만 쉬운거 아시죠 ㅋ

@madeinfonddugarage5988 Ай бұрын

hello, my friend, that a cool diy e-skate. really i love this. i am happy to see the result.

@KAMiJUINs Ай бұрын

Thank you for saying like that and Watching it too, bro :)

@joshjacklin89 Ай бұрын

I am heavily invested in this as if it turns out to be good, they would be awesome to commute to work on!

@KAMiJUINs Ай бұрын

I hope so too! Thank you for watching :)

@fujio001 Ай бұрын

New use for MAD wheels!

@KAMiJUINs Ай бұрын

Because it's nice and cool I wish I had more Mad Wheels. I have a lot to use lol! Thank you for coming bro :)

@pawekocur8961 Ай бұрын

We missed your DIY skills buddy, good think Your'e back ❤

@KAMiJUINs Ай бұрын

Thank you :) I'm always here and I will continue to create DIY content as long as I have more ideas. However, it takes a lot of time and effort to get that idea. ㅜ..ㅠ'

@pawekocur8961 Ай бұрын

@@KAMiJUINs in deed Kami, in Did. Thanks Bro 👍🏻👍🏻👍🏻👍🏻

@nicholassechaud Ай бұрын

Amazing BUILD Brother!

@KAMiJUINs Ай бұрын

Ciao, My brother :) Thank you for coming and watching!

@ino9138 Ай бұрын

now this kind of content that I waiting the most

@KAMiJUINs Ай бұрын

HAHA thanks for that :)

@Flyingwigs Ай бұрын

I've always wanted to build real Air Gear!! Soo cool!!

@KAMiJUINs Ай бұрын

You should try if i'm done :)

@tjk_prince Ай бұрын

I need to see these in action😂

@KAMiJUINs Ай бұрын

Yeah so do i :)

@fabricem9745 Ай бұрын

Kami X Batman e-blades 😆 Fantastic 🤩🤩🤩!!!

@KAMiJUINs Ай бұрын

Why the Batman? haha Thank you for watching :)

@fabricem9745 Ай бұрын

@@KAMiJUINs Because of big black wheels looks like "Batman begins" 's bike.

@JamesAlexanderMartin Ай бұрын

Very cool. Curious, are you going to put an esc and battery in each foot or are you going to run them to a power pack/backpack type situation?

@KAMiJUINs Ай бұрын

Please wait until the next video :) Thank you for watching!

@skfunk4550 Ай бұрын

What's next? DIY a KAMi junior! i mean that's just awesome.

@KAMiJUINs Ай бұрын

Thanks as always bro :)

@movation Ай бұрын

7070 is massive overkill I have same motors on my 25kg mountainboard. Are you going to run a dual vesc with long phase wires or 2 x vesc with a wireless canbus link. I recon option a with 85D and VX4 remote. Meepo 105 hubs would have been easier but this looks awesome. Might follow your plans.

@KAMiJUINs Ай бұрын

That's why I also said that those motors were overspec. I needed high revving motors for this build and those were the only 170Kv motors I had. So I had no choice but to use it. And please wait until the next video to find out what to do :) Thank you for watching!

@JKWorkShop Ай бұрын

uuuu and now i remember old anime Air Gear

@KAMiJUINs Ай бұрын

Yeah, a lot of people say the same thing as you! Thank you for watching :)

@fromatic2 25 күн бұрын

jet set radioooooooooo

@KAMiJUINs 24 күн бұрын

Thank you for watching

@gionharis13 Ай бұрын

Open the sky!!!

@shadowndraw Ай бұрын

damn it look so nice , great job 😎, but how do you install the batteries and the controller?

@KAMiJUINs Ай бұрын

Thank you for watching :) and please wait until the next video!

@Lessax9 24 күн бұрын

"on top to break the chain, no pain, dont be afraid"

@KAMiJUINs 19 күн бұрын

Thank you for watching :)

@Peter_Monti Ай бұрын

Hello from Australia 🇦🇺 Unbelievable 😮 i can't wait for your next video 😊

@KAMiJUINs Ай бұрын

Hello there :) thank you for watching, and I'll be back as soon as I can!

@1818thong Ай бұрын

Sick 🔥🔥🔥👏👏

@KAMiJUINs Ай бұрын

Thank you for watching for a long time, Bro :)

@demonhogo Ай бұрын

i love this

@KAMiJUINs Ай бұрын

Thank you :)

@FallingESP 2 күн бұрын

Interesting concept bro

@KAMiJUINs Күн бұрын

Thank you for watching :)

@nathangemme6594 Ай бұрын

Hey kami do you know what esc is compatible with the batterie of the pivot GT?? Love your videos btw

@KAMiJUINs 28 күн бұрын

In my opinion, Flipsky's V4 ESC series or TENKA are sufficient replacements. Thank you for watching :)

@nathangemme6594 28 күн бұрын

@@KAMiJUINs thank you

@EverybodyEditsHacks Ай бұрын

This is awesome. Is this your own design? I would %100 pay for this. These are going to be FAST

@KAMiJUINs Ай бұрын

Thank you for watching :) Of course, it's my idea. If it has enough battery bolts, it can be fast.

@TheAegisClaw Ай бұрын

Wont your heels hit the motors?

@KAMiJUINs Ай бұрын

No, I didn't put such a detailed measurement cut in the video, but I did the measurement before I put the binding on it. and there was no problem :) Thank you for watching!

@dmetrandor Ай бұрын

а вот это уже сильно))

@Peter_Monti Ай бұрын

Can you do a comparison video between Endeavor Pro 2 and Acedec nyx z3 please and give your opinion on the two of them, i suppose you don't need to say which is better if you dont want but at least the difference. Thank you and have a nice day. I appreciate the videos you do they very professionally done.

@KAMiJUINs Ай бұрын

First of all, I experienced both boards and both were good boards. However, the things I felt were as follows. - Endeavor Pro 2 : Powerful performance yet very smooth. Movements are generally flexible. So it was suitable for enjoying off-roading comfortably. - Acedec nyx z3 : The power performance is more powerful than Endeavor, and the initial torque is especially good, making it good for off-road destruction. The movement performance is more solid than Endeavor, so it has a good sense of stability. So it was suitable for enjoying off-road dynamically. I think you can choose depending on your preferred riding style. Hope this helps :)

@Peter_Monti Ай бұрын

@KAMiJUINs thank you. I'm an off-road rider so thank you for your opinion, keep up the good work

@zeprahzzz Ай бұрын

I wonder if the little standoffs can handle the torque 🤔

@KAMiJUINs Ай бұрын

Considering that, I'll match a battery with a lower voltage.

@Mikeonabus Ай бұрын

Thank you

@KAMiJUINs Ай бұрын

Thank you for watching too :)

@willknight3449 Ай бұрын

Fear of doing splits on skates has increased

@KAMiJUINs Ай бұрын

WHY..... ㅠ..ㅜ' Thank you for watching!

@ivanz1811 Ай бұрын

What is the cost of materials? Thanks

@KAMiJUINs Ай бұрын

- carbon fiber bars & sheets = about $200 - Motors = $108 x 2 - Snowboard bindings = $130 - Hardwears = $15 - MAD Wheelz V2 Stealth + Pulleys = $139 - Motor mounts = $30 x2 In addition, battery, ESC, remote, and enclosure costs will be added.

@sasukeXjoker Ай бұрын

Oh shit we about to get some "air gear" in this bih lol

@KAMiJUINs Ай бұрын

I actually don't know the animation but a lot of people are commenting on it.lol Thank you for watching!

@guitarwi3rdo Ай бұрын

The way you managed the motor mounted inside is giving me some ideas

@KAMiJUINs Ай бұрын

That's sounds good Thank you for watching :)

@valkalyuta2704 Ай бұрын

Eskate genius

@KAMiJUINs Ай бұрын

HAHA Thank you for saying that :)

@yudami0705 Ай бұрын

와 진짜 자신이 원하는걸 직접 만들수있는 능력... 저도 꼭 그럴수있는 때가 오면 좋겠습니다! 대단해요!

@KAMiJUINs Ай бұрын

감사합니다 :) 돈 많으면 좋은 장비 사셔서 더 쉽게 만드실 수 있을거에요 ㅡ..ㅡ'

@Lord4axe Ай бұрын

Прикольный способ разъебениться без управления с такими колесами.

@KAMiJUINs Ай бұрын

Спасибо за просмотр :)

@mr19zee Ай бұрын

Dude made airgears

@KAMiJUINs Ай бұрын

Yeah, a lot of people say the same thing as you! Thank you for watching :)

@kousueki7024 Ай бұрын

owh its storm regalia

@KAMiJUINs Ай бұрын

Thank you for watching :)

@sinjh111 Ай бұрын

오 후속편 기대하고 있을게요 +_+

@KAMiJUINs Ай бұрын

네~ 시청감사합니다!

@evren.builds 27 күн бұрын

don't forget to locktite em up ^^

@KAMiJUINs 27 күн бұрын

Yes, I agree. In my case, you wouldn't have been able to see me using it in the video because I even tested it and then I used that. Thank you for watching :)

@evren.builds 27 күн бұрын

@@KAMiJUINs gotcha, amazing build ❤️

@kenschulman-specializedend6061 Ай бұрын

Nice work…. So hurry up .., yr killing us with curiosity. Thank you

@KAMiJUINs Ай бұрын

HAHA... Please don't rush me ㅜ..ㅠ' Thank you for watching :)

@nin1ten1do Ай бұрын

i see laready TEMU ripp off XD

@CrashmanZero9 Ай бұрын

Temu ripoff means it's a good enough idea that people want it, and that's good for people without DIY skills. The PEV revolution is taking off pretty quickly

@KAMiJUINs Ай бұрын

Thank you for watching :)

@esk8Kyle Ай бұрын

Omg omg omg! I want that! Here in Canada, hockey is the most popular sport so electric skates will be awesome. Can i pay u to make me one?

@KAMiJUINs Ай бұрын

Thank you for your words, and watching too :)

@noobrefinisher5443 Ай бұрын

Ferb i know what we're gonna do today

@KAMiJUINs Ай бұрын

Thank you for watching :)

@RavnosRavenous Ай бұрын

AIR GEAR IS REAL!

@KAMiJUINs Ай бұрын

I actually don't know the animation but a lot of people are commenting on it.lol Thank you for watching!

@_HuChu Ай бұрын

스케이트 보드용 바퀴를 채용하신 이유가 있을까요? 접촉면이 평평한 바퀴는 직선주행시 안정성을 줄 수 있지만 회전 시 회전각이 엄청 넓거나(거의 안되거나) 균형을 잡기 어려워 보여서요. (자동차 타이어를 이륜차에 적용하지 못하는 이유와 같습니다) 일반적인 인라인스케이트용 바퀴 처럼 원형의 바퀴가 더 적합하지 않나 싶어 댓글 남겼습니다.

@KAMiJUINs Ай бұрын

1. 일단 동력을 연결할수 있어야 하기때문에 보드용바퀴를 사용했습니다. 2. 동력으로 움직이기에 속도가 꽤 있습니다. 그래서 회전각 보다는 직진 안전성이 더 중요했습니다.