24K Gold Plating Chrome Plated Items

24K Gold Plating Chrome Plated Items - 3 Easy Steps

Рет қаралды 42,204

6 жыл бұрын

Kit Shown: Universal Plater Kit - Chrome Edition: www.goldplating.com/collectio...
If you are wanting to plate a bumper, wheels, emblems or just a large chrome item - this is how you do it. This video covers the most common mistakes people make. Not removing all the chrome is the #1 mistake. Not blending the two areas correctly is the #2 biggest mistake. If you're about to embark on a large chrome item, pull this video up and watch it as you do it. Listen carefully as all the little seemingly unimportant bits of info make all the difference in success.
Website: www.goldplating.com/

Пікірлер: 59

@BradMeehan 3 жыл бұрын

Can you tell me what the current setting should be? I see the 7 and 5 volts but is it really zero amps? I'm using your brush and chemical supplies on golf clubs at home with a DC power supply.

@johnbarnette3916 6 жыл бұрын

thanks for the update

@CWeezy-kk5wf 3 жыл бұрын

How do you get the gel so thin mines brand new just opened and it's dry?

@CWeezy-kk5wf 3 жыл бұрын

Is it normal for it to smoke during stripping? I'm set at 7 volts. Also the sleeve is turning black?

@lambo5965 3 жыл бұрын

Nice guide. Liked and subscribed.

@trackpackgt877 5 жыл бұрын

If I had one of them everything in my house would be gold plated I love watching you guys gold-plate stuff it looks so fun I may have to invest in one

@GoldPlatingServices 4 жыл бұрын

Save up and take a leap! :)

@xredline07x 4 жыл бұрын

Amazing! Thank you!

@JavierSanchez-fp4em 2 жыл бұрын

If I have the gold plater can I chrome strip on it

@antdog559 4 ай бұрын

How do I make the gold darker

@ajose223w3 3 ай бұрын

Does this work with hard chrome

@siptellnet 3 жыл бұрын

Nice Job, very interesting and informative, if I want Gold Plate over SILVER coins, how to proceed, do I need clean and activate it or not?

@MuhammadAli-ev5jc 2 жыл бұрын

The activator solution they sell also degreases and cleans the item so I would recommend you activate first then rinse with Distilled water and then you should be able to go direct into your gold with no problem

@DaVinci0963 2 жыл бұрын

Thank-You very much!

@cholli4141 3 жыл бұрын

Excellent

@mistafennix8548 6 жыл бұрын

Is there another size gold plate set up for bumpers, my grill , side mirrors and the strips around my wheels, if not can y'all do em for me !? Thank you

@GoldPlatingServices 6 жыл бұрын

We have hundreds of customers who use this very kit to do bumpers, grills, really everything on automobiles. People find that using larger brushes has more waste and it is preferred to use the large woolley sleeves. If you'd like us to do them for you it would cost a lot more and they would have to be shipped to us. If you want a quote, e-mail info@goldplating.com with photos of the parts and any important details and we will get you one.

@flavacreations 4 жыл бұрын

Why not do this in reverse to chrome items?

@tim4883 5 жыл бұрын

Hi. Iam going to start a hobby- business in plating. What rig do you suggest for knives guns and tools not cheapest but something for a good start.

@GoldPlatingServices 5 жыл бұрын

If you're never going to be plating onto chrome plated items, I would recommend the standard Universal Plater Kit (Option 2 on the dropdown) that comes with Woods Nickel Strike. There is no other less expensive option for what you want to do and it is a wonderful kit. www.goldplating.com/products/universal

@mirkhan1747 2 жыл бұрын

Can this machine gold plate ak ?

@gflames23 Жыл бұрын

Great work. what are you spraying on it to wash it off?

@GoldPlatingServices Жыл бұрын

It is distilled water.

@subd3 Жыл бұрын

anyone know how to strip gold plating?

@robertdiyca6851 4 жыл бұрын

Do all chrome items, whether plastic or not have an underlying nickel layer?

@GoldPlatingServices 4 жыл бұрын

Yes, they always do.

@m.anthonyc.8761 Жыл бұрын

Idk if they still respond to questions and maybe someone can answer this; I've watched alot of these videos and in all of them, when you talk about using the surface activator you always say "do it really quickly, don't spend alot of time using it, you just do a quick strike and rinse it off" This seems like a important note because you always state that but you have never explained why or what would happen if someone spent too much time striking it or using the nickle activator in excess or if they failed to rinse off in time. Can someone please explain?

@GoldPlatingServices Жыл бұрын

A short answer without getting to complicated is that it can cause a cloudiness in your final product and it can look bad.

@gusrockswell8297 4 жыл бұрын

Can you please send me info to purchase? I did not see any advertisements to purchase a machine..thank you

@GoldPlatingServices 4 жыл бұрын

Here is a link to the Universal Plater Kit: www.goldplating.com/collections/plating-kits/products/universal

@komsanongsaranakom2467 4 жыл бұрын

Can this apply for the 3meter length stainless?

@GoldPlatingServices 4 жыл бұрын

Yes, you can plate items of virtually any size with enough chemicals.

@Hardtops_vs_verts 6 жыл бұрын

These issue i been having is when I leave a buffer zone... they activator dries up and leaves a white stain...what could be the issue? Loving the machine

@GoldPlatingServices 6 жыл бұрын

If i'm imagining what is happening correctly, I believe the best answer would be to do smaller sections. If it has enough time to dry, you're doing too large of sections or spending too much time activating. Where does the white stain show up and and what point in the process? Its possible its not the activator causing the issue.

@Hardtops_vs_verts 6 жыл бұрын

Gold Plating Services the stain shows up in my buffer zone... do u think i might be taking to long in the gold step which causes the activator to dry up and leave stains?. Thank u

@MuhammadAli-ev5jc 2 жыл бұрын

@@Hardtops_vs_verts Spray more Distilled water on the object to take off all the stripping solution prior to the next steps. Keep the object wet. if you let it dry you end up with sploches. use the drying as a gauge to move faster in your plating process. Hope that helps

@elijasegura2780 Жыл бұрын

@@Hardtops_vs_verts have you fixed that issue I’m going through the same thing on 64 impala mirrors

@Hardtops_vs_verts Жыл бұрын

@@elijasegura2780 yeah just lower the voltage on the activator to 4.5

@nemod3338 3 жыл бұрын

I like how piece of flat ducting pipe cost $1000.

@darrianparker9958 5 жыл бұрын

What about plastic with chrome plating?? Is it the sAme concept

@GoldPlatingServices 5 жыл бұрын

Exactly the same, as long as the surface is chrome what is underneath is not important.

@johnski3575 16 күн бұрын

Can u do raw plastic with the kit?

@GoldPlatingServices 13 күн бұрын

It can only plate items that are metal and conductive

@garydalley6143 3 жыл бұрын

Where can I get the anodes in the universal plating set

@SaqibAli-zg5vn 3 жыл бұрын

My 📱 number is 09654983337 my name is saqib alib

@SaqibAli-zg5vn 3 жыл бұрын

Yes

@StarshipGhost 3 жыл бұрын

Do you have one that gold plates plastic?

@MuhammadAli-ev5jc 2 жыл бұрын

You can gold plate on plastics by using a conductive copper spray paint or a conductive graphite paint (im working on one if interested lmk) The graphite goes into a flash copper solution, then an acid copper, then a nickel (or silver) and then your gold plate

@tomasquiroz342 3 жыл бұрын

Can you can on the next video, show us on the real mistake on some item with the lines or doing a big area and let see the results... even as you mention on the video’s.. on how people brought your product and how they sent you there items, I would like to see the mistakes being fixed ... I am interested in your product and waiting for your reply in the email I sent you..