Hes passionate about his work that's always a good thing for the customer

Passion, knowledge, quality, attention to detail. All the sign I look for in a company.

Fantastic video. I learned so much so quickly. What a teacher you are. Thanks for the lesson. Keep up the good work.

I learned so many things I didn't even know that I wanted to know! thank you!

It was a pleasure seeing your passion for the craft and serious attention to detail 👍

Dam good job. Never have seen nothing like this. You definitely know your craft. Nice👍

Very very exquisite job you did, I like the time that you take and care about the finishing product to make a good quality plating

Thank you for telling me all about the details sir. I appreciate you!!

WOWWWW, I come across this random video about gold plating and low and behold you shouted out my small small town Port Saint Lucie, FL CRAZYYYY.

Price may seem expensive for the 4/5 module complete kit, but this wouldn't be for just doing 1-2 items and letting it get dusty. Ask around for how much shops charge to do this service. Then compare that with the price vs how many jobs you can complete with it to equal the price for getting started.

I'm glad he knows the proper term of the slide. Kudos...

How do you prevent the soul ions from entering the holes and channels on the underside of the slide? Is the coating not enough to mess you p the tolerances?

Really nice video. Have any info on anodizing? I love the nickel and gold plating for steel but would love a quality setup for anodizing also.

Are there fumes that result from this process/what kind of protective gear do you wear besides the latex gloves? Wondering if i need a respirator/proper exhausting system and safety googles just in case of splashes etc

Hello, I have a plating set up. Before I dive in do you have any idea what it would take in gold weight(solution) to do 4 car wheel faces?

For a moment at the beginning of the video he was going to say "this is your daily dose of internet"

great work,, whats the hardness of chrome plating ? can it be scratched by any way ?

Love it! Excellent work that's a true beauty, I'm gonna have to buy this kit now👍👍👍

I was just about to say what I see alot of other viewers are saying "You're a great teacher". Wish I had you as a chemistry or science teacher!

Okay so I've been using all your solutions for some years. It's common practice for me to poor all the solutions back into a air tight bottle each night because I figured some chemicals could evaporate such as chlorine which I believe you use in woods nickel strike and want my solutions to last as long as possible but in a larger setup like this, how do you keep your system air tight (or do you) if you are going to keep a heavy amount of solution layed out like that or do you also seal the top to every container each night?

Wow. Turned out beautiful.

I have a old pipe wrench I would like to do this to, I was a fire sprinkler fitter for 35 years and I used the same wrench. What is the costs of this?

How do you strip the, black anodizing, bluing, cerakote, etc. From a gun slide or part? Do you have a solution for that?

Bro best golden slide I've ever seen other slides or plated parts look like mukas

what hardeners need to be added to a gold plating solution to obtain "hard gold" plating, or does the 18K Gold Plating Solution - Bath solution listed on the website already come with the added hardeners to form hard gold?

How is the wear on the gold plate? Isn’t gold a soft metal? Would it wear quicker than a regular slide?

Sick! I love the kit

...the man with the golden gun...will get it done.

Great video, very informative. Thank you.

How does the plating do with engraving? Does it have a problem in the small areas?

What anodes do you use for each plating procedure do you use the corrosponding metals or some type of universal ones?

May I apply on aluminum lower like zigana ? , And how much time it will take to deliver ? , And can I get discount if I buy a whole setup ?

I need complete professional setup for gold plate please advise and help. Thanks

Thanks for knowledge Mr Rob but what kits is this on your website??

Does the paper towel not scratch the gold? I just know I would never use paper towel on anything BC it scratches it unless it's glass and even then you use a soft cloth depending... Anyways super cool video! Thanks 👍

My brother I had a question, would this kit be the one you recommend for strictly firearm gold plating (gold, rose gold, & white gold). Or is there another specific kit you sell that is better for all firearms?

Great video and knowledge 🤘

How much would it be to get one plated for my Glock 19 I have the same tps upper just no part for a laser by sights so it’s flat

what kind clothe is recommended to use for safety?

does this process cause embrittlement or stress in steel that would require heat treating? or just plate and its good to go? is there any need/way to seal the gold plating to further protect it?

How many grams or ounces are needed to plate a slide? Curious because I need to know how much gold I need to buy. Thanks

GREAT VIDEO PLEASE DO MORE LIKE THIS!! ❤

What do you recommend to buy from your store if you want to gold plate pieces like the slide?

That was a great vid! New subscriber😁

Are these gold slides as durable as a regular cerakoted slide.

So do the solutions work multiple times or is it 1 and done then you have to remove and refill it? Can I just leave it there forever and use it when I want to or does it need to be air tight? Can I use a brush plating wand, have it plugged in and just dip it in those solutions because I'm cheap as shit and wouldn't want to pour out more for the brush. Of course making sure that the brushes don't cross contaminate. Also after and in-between solutions are you just dipping it in water? One looks like its soap water ?

Reminds me of the old zelda games that had shiny gold cases.

What do I know? Nothing...but if you pull the object out of the nickel bath doesn’t nickel oxide form immediately preventing subsequent nickel from adhering?

Good stuff bro!

I'm sure KZfaq demonetized this video due to having a gun part in it. Great video though!

Won’t it chip if it’s too thick?

Oh so this is where the Cartel Boss and Mobsters gets their beautiful 🤩 shiny Guns 💪 and Riffles thanks 🤩 for the video

I just purchased this system. Am I able to gold plate a blued slide from the inside but polished on the outside or does it all need to have blueing removed

How much do u charge to gold plate a slide like that

u just made every hood guys dream gun

Admire you work ..a big fan! How come the Anodes not get plated? What they are made from?

Awesome! Probably dumb q but, will the electro clean strip all paints? I assume it will...

So if you do a non polished slide will it come out that polished?

I wonder what finish he will use for the polymer frame

how much would something like that cost?

what type of machine will i need to gold plate big car parts?

Johnny do u remove the sleeve inside the firing pin channel or did u block it up. Great video...

Great !! Impressive very nice. Keep up the good work bro

Hi my best friend dug a 5 foot hole and put a latex pipe with a revolvr and a Glock 23 and all ammo fixed into the gun already. As far as I know it's watertight seal so I just wanted to know will my bulletts misfire or will it fire ok without any blow back?? The package has been there since he passed away RIP Anthony Z.Sylhamc. Almost around since 2007-2010-2021. After a gruesome fight between 81#H.A's and commos. Rip. Do you have any ideas on how to clean it before firing it. Thanks bruv. Peace out cuzzie.

Plating for extended periods of time even at lower than normal voltage in my experience typically creates burn marks yet I didn't see you have that problem gold plating for 15 minutes. When I do more items like jewelry and a typical ring for instance at 4v for more than 5-10 minutes (I like to apply thick coats as well being that they are items worn) blacken especially where my copper wire which is what I use touches the item to be plated. The only solution I've found is constantly moving it around and rotating the ring around where the copper (-) line touches the item. Is this because I don't use bubble agitation or am I missing something I should be aware of here? When it happens I typically have to use some #0000 steel wool to remove it and start over on those areas. Always love learning something new and look forward to a reply. I'll definitely be checking out your new PRO kit here.

you are the man ,great work

Which is better plating or cerakote I want to get my slide gold

How much is it too gold plate a slide it’s self ? For compact 9mm?

Do Clear Cerakote adheres to 24k gold plating?

For gold plating guns which kit is better the ( Woods nickel strike activation) or the (Trival Gold strike activation) ?

How do I go about getting my slide gold plated?

Is there any way you can get a set up to dip either the whole lower and upper of the full rifle ? Or would that effect temperature and ampage

What are all the solutions supplies needed for a gold necklace

Cool kit but how do you dispose of the solutions?

How much did you charge to do this?

How much does it cost to plate a Glock 19 fluted barrel? And can y’all do the mat gold color?

How durable is gold plating on furniture etc. (Not jewelry) will they last for a lifetime? Can't find an answer to this

Hi there! I enjoyed your video very much, I'm planning to buy one of those kits and goldplating on Guitars and Basses hardware. I was wondering, after plating parts, are the solutions can it be use another day? or has to be thrown away?, Thanks!

One question does it require a bake-out cycle post plating to remove hydrogen.

Great vid , very knowledgeable

Are the towers made of pvc fence posts?

Is this a special made piece you have to order because I dont see tha chrome slide on the website. i need that in my life! let me know

I always wondered who gold plated the cartels guns 🤔

Yeah but how durable is this compared to Cerakote?? And how expensive?

can you put a link for you're setup ?

One might conclude the gold coating would wear off after awhile from the heat of the bullets being shot.

Do you need ventilation system for your solutions because I know many solutions are highly toxic fumes

Ooops forgot to ask in last comment. Should all engraving be done prior to plating or can engraving be done after plating ?

how much did you charge to do that?

for how long the gold coat stay ?

Can you do the same thing, but black mirror polish?

Does it have to be stainless for this process to work??

when I first started tank plating I did all errors there is xD . Feels good with knowledge, Also experienced if you do gun parts there is a risk your parts wont fit together.

Damn you smart bro you got skills

How much would that be if I did that to my GC3 pistol ?

Do you offer gold plating or just the equipment to do the gold plating. I would like to have my slide done the same way as the one in this video

I just bought my pro series siked! Excited for Monday! 🥺

I like the woods strike. On a mechanical part like this your top finish is absolutely doomed if you put a softer aggregate (gold) plate under a harder material like bright nickel. It adhere good, but it'll scratch through the nickel better. This is similar to the mistake on colts original M16 hard chrome bolts. They struck it with copper under it and it flaked off and clogged up the gas system.

How much would this cost to do my desert eagle slide and barrel

Wow 😲 that's unbelievable absolutely brilliant the Man with the golden gun 007