26 Year Old Rusty Suspension And Arches Made New Again

26 Year Old Rusty Suspension And Arches Made New Again - WRX Restoration

Рет қаралды 1,595,428

3 жыл бұрын

If you would like to help support the channel and more projects in have a Patreon account - / rrcrestoration
-------------------------------------------------------------------------------------------------------------------
So here it is at last, the fitting of the new upgraded brake calipers and along with that i go nuts and overhaul the complete front end.
So in the Episode what you will see is me stripping out all of the suspension and steering components so as to gain complete access to every nook and cranny of the arches.
Once emptied of all there components i gave them a thorough cleaning with an all purpose cleaner and de-greaser then rinsed and dried them off.
Once dried the rust issues were dealt with, No rust had to be cut out as was only surface and could be treated successfully chemically. I ground down all the rusty spots with an abrasive disc on the angle grinder and finished up all the hard to reach areas with a wire wheel on the drill. I then treated the areas with Deox gel to ensure there was absolutely no rust left lurking and then that was topped of with hydrate 80 to create a barrier that rust will never get through again.
Once all that had cured the arches were lined with Raptor liner tinted to match the Aspen white bodywork. While the raptor liner was curing i set about refurbishing and replacing all of the worn and grubby suspension and steering components.
These were either cleaned up and painted or in the more severe cases like the hub they were blasted clean and treated with super blue to stop them rusting again in the future. I also stripped and zinc plated all the fasteners and parts that were rusty and didn't need replaced.
So after all the Raptor liner had cured and the parts had all been refurbished i set about reversing the process and refitted them all. I also had to make new brake lines as the originals were rusted through.
I hope you will enjoy the video as i has ALOT more detail than this description as if i were to describe every detail i would need to release a pretty lengthy book haha.
so anyway Enjoy and please leave a like and comment if you enjoyed this video :)
See you al again soon
RRC
-------------------------------------------------------------------------------------------------------------------
A little History
The project in question is the engine bay in my 94 Subaru Impreza WRX. As i can be heard saying in the intro of this video i love impreza's and i wanted a rust free one as all the UK ones suffer from lots of rust issues so in 2004 i imported this car from Japan and it was totally rust free when it arrived all those years ago. It has a couple of blisters here and there now but thats to be expected when living in Scotland.
Anyway im getting off track, I was having lots of fun driving the car at full boost everywhere until 2014 when the thought popped into my head " lets go for more power" so i took the engine out and begun the process of having it all upgraded, better gaskets, race bearings, forged pistons, con rods etc etc then life got in the way and the engine was put to the side and the car was stored in a shed for the past 5 years.
The initial condition of the car looks horrifying but its only a thick layer of dust and crud on it and there is a good layer of carnuaba wax separating all the crud from the paint so a quick pressure wash and she'll be looking good again .
-------------------------------------------------------------------------------------------------------------------
A new addition to my videos from now on will be a water mark and my channel name popping up in random places throughout the video as im getting rather tired of people re-uploading my content as their own i hope you guys understand.
If you like what you see and have any ideas for the channel or would even like to donate something to restore to the channel please get in touch. :)
And as usual if you liked the video please like share and subscribe and help the channel grow.
Previous Impreza videos - • Subaru Stuff
If you would like to help support the channel and more projects in have a Patreon account - / rrcrestoration
#Restoration #Subaru#Suspension
Really Random Channel
26 Year Old Rusty Suspension And Arches Made New Again - WRX Restoration

Пікірлер: 1 100

@RRCRestoration 3 жыл бұрын

When you have finished watching this episode dont forget to check out the rear end being sorted out here - kzfaq.info/get/bejne/qq9mmrZyyM2Ycmg.html

@simonlloyd7557 3 жыл бұрын

No daft music, no bullshit, no whacky and zany 'personality', just good content.

@turbowank16v 3 жыл бұрын

Suspension on these cars is so easy to work at unlike my audi a4.different suspension arm for every day of the week.

@memo7125 3 жыл бұрын

my w204 same shit lol

@dannythompson1948 3 жыл бұрын

Wrexs truly were built to be fixed in a jiffy.. They knew colin was tough on them..

@variuswalker2975 3 жыл бұрын

When you restore things properly you've got my attention. When you restore cars you've got my attention. When you restore my FAVORITE cars, i subscribe lol

@RRCRestoration 3 жыл бұрын

Thank you so much for your kind comment and subscription it means a lot :)

@Lplaterwrx 3 жыл бұрын

Same lol but I actually own a wrx same year and color but it’s in better condition

@haski7 3 жыл бұрын

Смотрел и наслаждался твоей работой,всем бы такой гараж иметь)))в котором все можно отремонтировать

@injuhasz 3 жыл бұрын

great job as usual, only one remark: when tighten the swingarm's front screw, it must be the same position as the car sitting on the wheels otherwise the rubber in the silentblock will be damaged very soon...

@tonyz8553 3 жыл бұрын

I think you should reply to this comment since it is VERY IMPORTANT to prevent failure of the front lower arm bushing. Tighten the bolt after the car is down with weight on wheels or you will rip the bushing on the first bump you hit.

@nealpurnell7438 3 жыл бұрын

TonyZ oo

@marcinmorris 3 жыл бұрын

Good I am not the only one who saw that :)

@DarrenBoxhall 3 жыл бұрын

I came here to say this haha

@Barbosa.augusto 3 жыл бұрын

I was here to say just that 😂

@Kro_man_tx 3 жыл бұрын

The OCD side of me loves your videos. I wish I had a space to disassemble a car like this and really restore it. Keep up the good work my friend. Love and props from Texas!

@RRCRestoration 3 жыл бұрын

Thank you so much, Glad i could provide you with some entertainment :)

@mjh7609 Жыл бұрын

Now that's what I'm talking about-- application of knowledge, precision, and attention to detail. We need to return to these standards. People have been getting ripped off by shoddy maintenance and repairs far too long. It is a crime.

@user-kd2nq6bw4n 3 жыл бұрын

Порнуха для субаруводов. Красиво и глаз радуется. Субару заслуживает любви и заботы👍👍👍👍👍👍👍👍👍👍👍👌👌👌👌

@usethenoodle 3 жыл бұрын

You never have to apologize for your camera work. Top notch man!

@RRCRestoration 3 жыл бұрын

Thank you so much :)

@YouSuckAtTag 3 жыл бұрын

Looks great! I don’t know if this particular car is like this, but I have always been told that all torque specs on the suspension bolts apply when the weight of the car is loaded on the suspension. You may want to retorque with the weight loaded on all 4 corners before you actually start doing events with it!

@TheAcethunder32 3 жыл бұрын

You are correct. This is so the bushings are in a neutral position with the weight loaded. If not you WILL see premature bushing failure.

@user-rt6cv6cn3j 3 жыл бұрын

Боюсь, что ржавчина снова вылезет (((( В целом, все очень красиво ! Спасибо за то, что порадовали мои глаза

@Interestingnews33 3 жыл бұрын

Через год....

@jonclark7580 3 жыл бұрын

Надо будет антикор сделать с Пушечным салом)))

@user-rt6cv6cn3j 3 жыл бұрын

@@jonclark7580 пушсало рулит )))

@ChristianBiggins 3 жыл бұрын

Omg a tool for everything!! Such nice work. Wish my bmw suspension was this easy to work on.

@advant101 3 жыл бұрын

Damn, this gives me anxiety about taking my car to shops or even doing refurbishing work myself- I feel like most places don't put this much attention to detail in their work. Good stuff

@802Garage 3 жыл бұрын

Really fun and interesting to watch someone do all this work using the same tools and methods I always do. Detail oriented and I love it. Fine job!

@brianparkinson1594 3 жыл бұрын

Brilliant workmanship.... takes pride in his work!

@RRCRestoration 3 жыл бұрын

Thank you :)

@lotharruttert9109 3 жыл бұрын

Wow, dieser Subaru wird besser als er damals im Neuzustand war, tolle Arbeit.

@Black8888Shadow 3 жыл бұрын

oh man i felt so satisfied when you talked about missing that spot !

@user-lo4rn2to5k 3 жыл бұрын

Кайф работать когда в доступности весь нужный инструмент и запчасти 👍

@Gordo101978 3 жыл бұрын

What an awesome restoration. I personally would have undercoated the arches in black.

@brianadamo7478 3 жыл бұрын

I agree with you there. They look BEAUTIFUL right now, but after one drive, they'll be super dirty again. Seeing that would drive me crazy after all this hard work!

@RRCRestoration 3 жыл бұрын

Thank you :) Im not too keen on black arches i much prefer having it the same colour as the body.

3 жыл бұрын

The Impreza WRX is still my favorite Japanese car. You did a nice work.

@RRCRestoration 3 жыл бұрын

Thank you :)

3 жыл бұрын

@@RRCRestoration You're welcome. Cheers from Chile, and stay safe of the COVID-19. Hope end this soon.

@johno4377 3 жыл бұрын

4:07 when the bolt slips down into the engine bay lol RIP

@TarasTuz 3 жыл бұрын

huh)))

@stiliqn007 3 жыл бұрын

All of this crusty rusty stuff being restored and made shiny makes me a happy boi

@Murgledoo 2 жыл бұрын

Dang I really like that water pot you used with the hand pump. I need to ask for one of those for Christmas.

@thiagomoraes5314 3 жыл бұрын

what most impressed is who this guy is meticulous with each torque. awesome! My Torque is "half a turn before you dust the screw" rs

@sethdunlap9868 3 жыл бұрын

I just finished watching the movie, "Highlander" and have finally figured out how you've become so talented at repair... you are 700 years old and have had A LOT of practice! 😂😁

@beakittelscherz5419 3 жыл бұрын

Thats what Draculas Girlfrind sais ... lmao

@PRO-jc8wj 3 жыл бұрын

Отличная, качественная работа, на совесть!

@sharptoothtrex4486 2 жыл бұрын

Great job, lad. You make great car and car parts restoration including the whole engine and transmission. This is something I can do in Car Mechanic Simulator.

@acebisnar861 3 жыл бұрын

This guy made the thing look easy and very professional. With the right tools and technique it can make you motivated in your next project.

@RRCRestoration 3 жыл бұрын

Thanks 👍

@robertsimmons3336 3 жыл бұрын

This is going to be so beautiful when it's all done. Can't wait to see it in all its glory!

@RRCRestoration 3 жыл бұрын

Thank you, Yeah i cant wait either :)

@delta-tuning 3 жыл бұрын

This is great. I need to do this to mine eventually as it's getting a bit rusty and will use this as a guide. The attention to detail is excellent.

@XxTrustNoOnexX 3 жыл бұрын

fantastic job!Greetings from Czech republic

@fushikizz 3 жыл бұрын

Cheers from Japan. Nice video. Two point. Need grease between stabilizer bar and rubber bush,　otherwise it queeks later .Bolts and nuts of suspension better be tightened after car stand on the ground, So called as zero gravity tightening to prevent any unnatural torsion to the rubber bushes

@badlarry172 3 жыл бұрын

another great upload, love to see the tools you have that i've never seen before, the brake line fitting tool was one of them. ta

@RRCRestoration 3 жыл бұрын

Hey Guys, As you have probably noticed already i have updated the channel name and logo. The channel is no longer Really Random Channel it is now RRC Restoration. Just incase you were wondering why the water marks in the video still say Really Random Channel. Enjoy.

@cristoluiscacerescabrera3864 3 жыл бұрын

@Lplaterwrx 3 жыл бұрын

This is Awesome. I own a gc8 wrx and was looking at builds and found this you just earned a sub and a viewer and I would love to also see a interior/ subframe restoration as I need to do that on my gc8 and would love to know how to do it. Peace from Australia✌️

@jozefvelez8458 3 жыл бұрын

You've put an insane amount of detail in this so far, would you guide my legacy restoration? This is all amazing!

@silesianix 3 жыл бұрын

I enjoy your movies a lot. mainly because YOU ARE TAKING CARE ABOUT ALL DETAILS, this is extremely good quality of work!

@RRCRestoration 3 жыл бұрын

Thank you very much :)

@jmdean_ 7 ай бұрын

I have a very similar situation going on and you are giving me the courage to go tackle it!!! Masterful work, bravo

@RRCRestoration 7 ай бұрын

Go for it, you wont regret it its a very satisfying process :)

@zappy7393 3 жыл бұрын

After watching a few vids and seeing the attn to detail...subbed ;) To me, its like a form of relaxation...so quiet...so peaceful.

@MrMoniek88 3 жыл бұрын

13:03 I always wait until the car sits in natural position and then I`ll tight this bolt, otherwise the bush will have a limited live time mate.

@orangeguy777 3 жыл бұрын

верно. а еще , запрессовывать подшипник лучше все таки давя на внешнюю обойму)

@hellbillypete.7898 3 жыл бұрын

I think that crack to the left 9:00 is gonna get us back here again, and the best should of course been to clean the whole innerfender from paint..but its your car, and i know you doing an excellent work!

@rubbernoze1348 3 жыл бұрын

Copper for brake lines is usually not a good idea. Love your videos.

@RRCRestoration 3 жыл бұрын

Hi, Glad you enjoy my videos :) The brake lines are not pure copper they are a special alloy that doesn't suffer from fatigue or cracking so no safety concerns here ;)

@nono_ct200 3 жыл бұрын

Good Job! The screws should always be torqued when the weight of the car is on them.

@chriswills9530 3 жыл бұрын

2:35 - looks like that caliper fell asleep in a salt mine and couldn't get out. Crikey, as we say South of the Border...Stunning transformation in your usual superb style.

@RRCRestoration 3 жыл бұрын

Haha love that description :) Glad you enjoyed the video :)

@seanmoore4653 3 жыл бұрын

Discription comment was a weak attempt at trying to sound intellectual. Retract back to your basement beating your ham over your dead mother..

@dozer877 3 жыл бұрын

Watched first 60s, heard it was a series, went straight to episode one

@Crunchy_taco69 2 жыл бұрын

That was pleasing to watch

@ozzysgarage 3 жыл бұрын

Okay this is incredible!! Love the attention to detail most miss!

@fudgeexplosion 3 жыл бұрын

26 years! This is what suspension and brake components look like after driving on the roads in the salt belt for 37 and a half seconds

@JapinoyFun 3 жыл бұрын

I wish i have that skills and tools to restore my car suspension part, nice video sir.

@kieferste 3 жыл бұрын

I'm starting my gc8 next year cant wait ive been ordered by the wife to finish the camper build before I start it so the old girl has been sitting and waiting next in line

@carpovdrive6568 3 жыл бұрын

Супер) как всегда вдохновляет))

@romanneoberdin9935 3 жыл бұрын

Согласен,заказал уже такие составы против ржавчины и ещё парочку этой же фирмВ для полостей и консервации внешних деталей

@RRCRestoration 3 жыл бұрын

Hey Guys, For everyone concerned about me using copper for the brake lines i would just like to let you know that they are NOT copper, they are an alloy containing some copper hence the colour and are sold as fully tested and rated brake line replacement. So unlike pure copper it doesn't work harden over time and shear or crack under high pressure. No safety issues here what so ever but i want to thank you all for being concerned about my safety ;)

@alisdairherd9501 3 жыл бұрын

Used to be steel Bundy tube but now would be more commonly kunifer or cupronickel tube. Ironically we use copper nickel alloys now because steel tubing may suffer from corrosion. So steel is less safe.

@leemilica 3 жыл бұрын

Did you torque down the bushings after you put the car on the ground?

@highwayouttakes4570 3 жыл бұрын

You just answered my question my good man

@CorralesRacing 3 жыл бұрын

Un cambio radical

@abelinfante3697 3 жыл бұрын

Just fantastic

@Michael-gc6mq 3 жыл бұрын

Impressive, that "and refurbished parts ready to be refitted" shot is magazine quality, thanks for sharing the process.

@RRCRestoration 3 жыл бұрын

Thank you very much :)

@onemilionmiles1729 3 жыл бұрын

😂

@onemilionmiles1729 3 жыл бұрын

The parts are not even powder coated ..he just use paint brush.. where is the “quality”??? F..ck 😂😂 You See what you want to See..

@JK-fr7dz 3 жыл бұрын

Your talent is undeniable!

@RRCRestoration 3 жыл бұрын

Thank you :)

@KostasStergio 3 жыл бұрын

Excellent video once again my friend! One question only: why didn't you paint the suspension nuckle? Won't it rust soon again?

@RRCRestoration 3 жыл бұрын

thank you , glad you enjoyed the video. Good question, I left the part unpainted as the bluing process should protect the steel from rusting again and this part was never painted from the factory so i chose not to either.

@albertmeyer8983 3 жыл бұрын

Outstanding job! It looks so easy....

@petergordon4525 3 жыл бұрын

It is a great job, however I personally don't like the bare copper brake pipe.

@scoobysean555 3 жыл бұрын

Very good vid think you got another sub.... aru here 😂 mind the pun 😂 excellent Intel could you do a break down in cost of parts of possible thank you

@arthurspontiacfieroblog 3 жыл бұрын

@@petergordon4525 I was wondering about that. I've got to replace my brake lines, and when he brought out the copper, I was thinking "well, that'll be easy!" but after a search, most people agree that copper brakelines are too soft.

@darius2640 3 жыл бұрын

14:14 i have never seen an easier ball joint install

@brianburke7440 3 жыл бұрын

cool subaru design, since the '60s. this design anywhere else?

@BuzntFrog 3 жыл бұрын

They're good but those 14mm bolts are notorious for snapping off in the knuckle. You also have to be careful spreading it to get the ball joint out. Really easy to break those eyes off the knuckle with a chisel or a flat head as shown in the vid.

@sethdunlap9868 3 жыл бұрын

Only ball joints I have done were on old Ford trucks from the Northeast of the United States (Rustville, USA.). Anything NOT involving a 4# hammer, a torch, and a rented press impresses the s**t out of me!!

@JasonTylerRicci 3 жыл бұрын

I'm currently replacing lowers on my Civic and they're a nightmare. When I saw how Subaru's did ball joints, I thought, "They should all be like that"

@darius2640 3 жыл бұрын

@@JasonTylerRicci I have some experience with those. did you try the C clamp and socket method? after the hydraulic press thats the 2nd easiest way to do them

@JoshSendo 3 жыл бұрын

That Aspen White POPS!

@nealwright5622 3 жыл бұрын

Very satisfying video and great job done. As someone who has done similar recently, let me pass on a tip - ditch that scissor clamp style brake pipe flaring tool and get yourself a 'powerhand' type one. I wish I'd swapped years ago!

@jankindl915 3 жыл бұрын

10:20 yes! you got me :D

@takumifan3788 3 жыл бұрын

Shouldn't the lower control arm bush be tightened to spec when the car is on the ground? In my Impreza i was doing whole rear suspension and every bush was tightened with car on the ground and one person in the trunk.

@russellmander7789 3 жыл бұрын

I thought the same thing

@RRCRestoration 3 жыл бұрын

Technically speaking yes they should be as tightening them while in the air tends to "preload" the bush making it wear a bit faster than it normally would but as this car isnt my daily driver and will only see the road a few times a year im not overly concerned about slightly accelerated bush wear.Thanks for leaving a nicely thought out comment though :)

@BabaG 3 жыл бұрын

I wonder if someone has tallied how many had said "great job" or another accolade. Thanks for sharing, I think we who watch this find it refreshing to know that there are some folks out there who want to do the right thing whatever the job maybe. In a world where everyone is cutting corners either politically or socially or economically, it is good to know the likes of you exist. Love the meticulous attention to doing things the proper way.

@RRCRestoration 3 жыл бұрын

Thank you so much for leaving a comment :)

@user-pv9vu8ie5 3 жыл бұрын

Привет 🖐🏻. Ждем новых видео . Лайк это то чем мы можем Вас поддержать. Удачи.

@mihailmikhail2710 3 жыл бұрын

Мне вот не понятно зачем ты регулировочные болты сход-развала усадил на резьбовой герметик? Вроде как написал при этом что всё вернул на свои якобы места, но старая подвеска имеет своё "проседание" и уже от этого проседания была прежняя настройка, на новых шаровых и рулевых наконечниках резинотехнические элементы не имеют износа и люфтов, а прежняя настройка ходовой всё это учитывала под просевшие РТ элементы, смысл тогда выставлять настройки подвески в прежнее значение? сход-развал в любом случае делать, тогда и бессмысленно было усаживать регулировочные болты на герметик.

@armaxkovalenko1230 3 жыл бұрын

А какая вообще разница в том что ты написал? Он в шаровую и рулевой наконечник смазку не забил, сейчас покатается маленько, а когда в следующий раз будет ходовку трясти уже не будет бездумно клей лить.

@staskenig 3 жыл бұрын

Электронный динамометрический ключ это конечно круто. Вот только затянул сайлентболки в рычаге без нагрузки. Первая яма и привет сайлентам

@alejandronunez3544 3 жыл бұрын

INCREDIBLE Car and excellent job!

@AndcRew14414 3 жыл бұрын

Hi. I was wandering what substance were you using during "spot of cleaning" in 7:07 :) Results are incredible!

@oisinkenny4201 3 жыл бұрын

Wondering for my own curiosity, is there no need to primer before the raptor lining is applied? Unreal work. 👌

@RRCRestoration 3 жыл бұрын

Hi, Theres no need to prime as long as the surface is sound and prepped according to the instructions ;)

@noelmedrano9267 3 жыл бұрын

So satisfying. Very fun to watch.

@markcameron8510 3 жыл бұрын

Outstanding work + my favourite car + Scottish accent = much satisfaction. Another big “thank you” from Canada.

@RRCRestoration 3 жыл бұрын

Thank you for watching and im so glad you enjoyed the video :)

@ZikPlayGames 3 жыл бұрын

а со второй стороны? осталось как было))))

@TheJoeBarbaro 3 жыл бұрын

Плохо видео смотрите 25:35

@beakittelscherz5419 3 жыл бұрын

@@TheJoeBarbaro Idk why , but I like your name ... But are you like Michelle ..".Com´ere my hubby Obama Idiot" or more : This Obama-Idiot? ... I like the first one better . Lol

@TheJoeBarbaro 3 жыл бұрын

@@beakittelscherz5419 ;)

@andreweh4 3 жыл бұрын

Beautiful job right up till the part where you put on the copper brake lines. I don't think that copper lines will even pass inspection in this country. Copper work hardens anywhere it can move or vibrate. I would never use copper brake lines on my car.

@RRCRestoration 3 жыл бұрын

Hi, The brake lines are a special copper alloy specifically designed for brakes lines, perfectly safe ;)

@alc818 3 жыл бұрын

@@RRCRestoration might want to mention that in your video as there are probably viewers who may use soft copper by mistake with potentially disastrous results.

@johnathanreese3700 3 жыл бұрын

@@RRCRestoration it wouldn't pass here in the states! and you didn't double flare it!

@steveguest8028 Жыл бұрын

@@RRCRestoration I have used these type of brake pipes literally thousands of times during my career and they are perfectly safe

@farewell_to_normalcy9352 3 жыл бұрын

Much like all your work, super satisfying watching this resto. No corners cut and the proof is in the pudding. Hats off to you

@RRCRestoration 3 жыл бұрын

Thank you so much 😀

@s.o.s.exploration2412 3 жыл бұрын

Nice to hear a voice behind the camera. I hope you don't mind me using the term bushies instead of bushings. If I ever say it and it becomes uploaded I'll give you the credit 4 that. 😉 Been restoring this 04' Passat 1.8T Wagon 5-speed. Great motor just needs some love underneath.

@MadMathMike 3 жыл бұрын

I thought I would play this video on 2x speed (because of my short attention span), but I watched and enjoyed the entire video at normal speed! Incredible work! Thank you for uploading this! 😁

@RRCRestoration 3 жыл бұрын

Haha awesome i must've put together a captivating video for a change :) Really glad you enjoyed it

@MadMathMike 3 жыл бұрын

@@RRCRestoration Hahaha, you're videos are *always* really good, but it is hard to compete against ADHD for my attention! :-P

@leechamberlain1273 3 жыл бұрын

You do some very good work and I enjoy watching all your videos .

@RRCRestoration 3 жыл бұрын

Thank you very much for your kind comment :)

@badrinair 3 жыл бұрын

such a smoothing experience watching an expert at work .

@ze_german2921 3 жыл бұрын

You are Lucky and have Aluminum Wishbones, My 2004 Impreza has steel wishbones and I knew it had rust when I purchased it but after taking it for a test drive about 75 miles after taking ownership, my wishbones snapped caused me to crash at 65miles per hour and hit a sign. I am now rebuilding everything and anyone that has a older Subaru, make sure to inspect your wishbones for rust. There is a Big Safety recalls on Subaru wishbones. Great Work!

@darrenliggett7222 3 жыл бұрын

Really love this style of video, brilliant use of angles, straight forward and no unnecessary talking and a great way to learn some tricks of the trade plus your Scottish too, so you're all right by me pal ;-)

@RRCRestoration 3 жыл бұрын

Thank you so much for your kind comment it means so much to me :)

@RochX-7 3 жыл бұрын

Man... love everything about this restoration process. Well done mate.

@RRCRestoration 3 жыл бұрын

Thank you so much, More coming from the GC8 very soon ;)

@ironduke42083 3 жыл бұрын

Absolutely stunning beautiful work

@RRCRestoration 3 жыл бұрын

Thank you! Cheers!

@GamerViliam 3 жыл бұрын

Omg, that difference. It is really nice. 👍🏻

@RRCRestoration 3 жыл бұрын

Thank you! Cheers!

@royberger1558 Жыл бұрын

Really beautiful work.

@7thvervetheproducer800 3 жыл бұрын

Super relaxing to watch! VERy nice work!

@RRCRestoration 3 жыл бұрын

Thank you, Glad you enjoyed it :)

@user-zq7kh9bq5c 3 жыл бұрын

Ты молодец. Я уже давно смотрю как ты собираешь SUBARU. С нетерпением жду следующего твоего видео. Удачи тебе👍

@user-jv4yw1ol6z 3 жыл бұрын

годнота

@conradfuller6697 3 жыл бұрын

Extraordinary workmanship. Thanks for the video.

@RRCRestoration 3 жыл бұрын

Thank you for watching :)

@JustDoMeCrew 3 жыл бұрын

Almost rally ready haha. Great videos!

@philcackett1155 3 жыл бұрын

Proper job. Looking forward to the next one.

@RRCRestoration 3 жыл бұрын

Thank you :)

@brunopinheirofreitas 3 жыл бұрын

I have a Subaru Impreza 1996 in Brazil, it's awesome to watch your job!! Thank you, it's very satisfying to see someone making this all for a classic Subaru. Please, keep going!

@Dallas-Rife-UDX-347-Tennessee 3 жыл бұрын

Very well done , I love these cars . The rear seems to not be as bad . Looking forward to seeing you finish everything and take it for a drive 👍

@nach0vidal 3 жыл бұрын

You sir, are an absolute genius!

@RRCRestoration 3 жыл бұрын

you're too kind :)

@OCDRex11 3 жыл бұрын

Man, between Japan and the UK, that poor thing is rusted a lot! Glad you can/know how to remedy it all. Love the build series on the WRX. I have owned a few.