Here is an update to this load that I tested today. WOW,Just F ing unbelievable! Used steel #5 & tss #9.hulls, powder, weight, and wad the same. Using mod and light mod out of a Remington Premiun 28g. Was at 40 yards from patterning board. A metal one 3/16 thick. Mod first at lower right. Great pattern! Light mod on uper right. One pellet hit my buddy Jeff in the stomach and another hit me just under the eye. After the initial shock, went up and looked. GREAT pattern also! But what was really impressive is all of the dents in the metal. Not little scratches but Concaved in BIG time. This is one bad ass load, too say the least. Glad I didn't pattern the 20 gauge load first! This duplex is fantastic. You did a great job! Yeah Boy Howdy!!

Always great info, leading edge! Thx!

Very impressive pattern on the 28 gauge. I wouldn't be afraid to shoot anything with that, thinking that I'm under gun with that load. Good job and thanks for sharing.

Thank you !

Thanks for the video. Been reloading for 10 years and just got into TSS. So far it has been wild to see the patterns. I have a 12ga #9 turkey load and a #8 duck/pheasant load. Was thinking of doing some duplexing myself. So far I’m at 4.50 a round with straight TSS.

I am getting older. I want to shoot my 28 gauge now. I just need to figure out a duplex load. Thank you for the nice video.

Great job 👏 I am just starting to reloading and I love your work. Watching every reloading video out there. Yours is the best. How can I get your reloading information. Ive been thinking about loading for years but the expense verses availability wasn't there. Now I decided with 410 3inch and 28ga 3inch I can reload for less than half price and have available loads. Hunting loads.

Awesome thank you for sharing! Would love to see the 410 patterns. I’m using a 5/8oz #9 TSS 3” 410 load with a negative (-.005) comp-n-choke

Which powder and how much in this load?

I'm duplexing my 28ga 160gr tss #8 and 260gr #3.5 bismuth and have been smoking ducks and geese . they pattern great 170 pellets =to lead #5 in count but way more energy

I would like to see those 410 patterns. You mentioned experimenting with Bismuth. I reload bismuth for 20 ga, and I honestly don’t think that a smaller gauge has the hull capacity to hold a sufficient payload of large enough pellets to be effective past 40 yards, or that it would pattern large enough bismuth pellets at that range well enough to be consistently lethal. But 7/8 oz of #5 bismuth through a tight choke will absolutely do a number on almost anything that flys if you hit the head and neck inside 40 yards. If you do decide to try it, buffer helps immensely.

This is exactly what I'm seeing. I shot my 2-3/4" 12 gauge duplex load at 40 yards in a light modified choke and it looked like a damn turkey load. 😆

I’d like to see the 410 patterns

Would like to see 410 results. I'm from the UK and we have just started to experiment with duplex loads in a 12g 3.5 inch shell 25g tss 24 g Copper plated steel shot size 5 for steel and shot size 4 tss as a goose load , at 40 yards the tss will pass through 8mm plywood the steel just sticks to the surface.. Extend the range to 60yds and the tss almost goes through the 8mm plywood, using half choke at 60yds all the tss is inside 30 inch circle

Have you tired mixing the TSS and steel 4 shot together and loading the shell mixed. Would it react differently and spread out faster?

I shoot mostly wood ducks 15-40 yds. How do you think this would work with #5 steel duplexed with #9 tss in 20 gauge with a shot card rolled?

Do you have any 12ga #7 TSS duplex loads you’d be willing to sell? I’m going to try the current BPI load of the week. I shoot my home made bismuth for ducks and it’s great, but I need something for those specks and snows that won’t commit

Where can I find your load data at. I’ve bee duplexing with 1/4oz TSS . Would like to up it to 1/2oz TSS with steel for shooting divers.

Would this work with the bigger steel like 2s on top

Love the video its been very helpful. I have the SBE3 28 gauge and want to try loading this. Are you able to send me the load data for this one? Or show me where it’s been published?

What was the load in this particular Shell, 1oz load or 7/8oz load?

Anyone find his email yet? @bullet225ho have you looked at anything with a 1/4oz or 3/8oz TSS the rear steel shot? 3/4oz up to 1oz loads?? Have you looked at any similar TSS Duplex loads for AA-HS Hulls? Thank you for your time!