it helped for easier shifting and if ure bike moves without hitting the gas if ure in gear
@xXlBlazeXx6 жыл бұрын
i springs go in first and the caps go on top of the springs then push and hold them in and slide the sleeve on turn it till u hear a click
@junior95601 Жыл бұрын
Thank you
@kelvenguard4 жыл бұрын
Thanks My Bearings are heated and welded to the shaft... MUST BE
@alenbegonja4186 жыл бұрын
Thanku.Did it help for easier shifting?which way do the springs go in cup side first or ?
@nathanhladky2 жыл бұрын
What is torque spec for reassembly?
@JuanRamirez-dv4ou3 жыл бұрын
I took mine off n discovered it was missing those two springs n lil pins...what should I do....
@xXlBlazeXx3 жыл бұрын
need to get ahold of them probably haft to get another bearing to get them... not sure if they sell them separately
@alenbegonja4186 жыл бұрын
Any greasing needed
@xXlBlazeXx6 жыл бұрын
the bearing is pretty sealed and pre-greased should not haft to but im sure it wouldnt hurt if ure a grease monkey just remember it gets hot in there
@youfixitatvutv5 жыл бұрын
Yes. He did not grease. It takes kluber isoflex 52. His is gonna wear out in no time.
@kelvenguard4 жыл бұрын
@@youfixitatvutv My New Factory Bearings from CAN-AM dealer have a white/clear grease in them... Looked like NO grease until I opened the package and rolled the bearing