gremlinsbreath Just like the TSA people at the airport..

Me too lol like do these people have NOTHING to do?

that's the safety committee

gremlinsbreath home depot is better

The Rocket Brother PNW that's right they have 20 people watching..instead of 9

I work at Lowe’s and do all the grunt work. I can confirm that when a helping hand is needed, all your old age co-workers vanish without a trace.

Then you do a job at these people's house and they bitch at your hourly rate.

​@Justin R why not just tell your boss if the old lady isn't gonna be doing the grunt work neither am I that's what I would do

So true 😂

@@justinr2564 Not ALL of us "old age co-workers", I helped wherever and whenever I could. I'm not afraid of work, like many young-uns.

Yup a resell all those twisted pieces of shit

You must've been proud of yourself when they called you and said you're hired

Mike Rycc now it makes sense why all the 1x2’s are always warped to shit at Lowe’s 😂

If you can find the bander.

So picking up 2 giants load at the same time isnt that big of a deal?? Thats just moronic.....

SantaDog81, right? Like he would have done any better with that disaster waiting to happen.

Bodybuildingking he looked so burnt out from being up 3 days straight in that stretched out shirt.

I feel like it was more of a “what we were all waiting for finally happened now let’s get back to work” type clap

Str8 P.O.S TWEEK KNOKK

SantaDog81 the fucker that thinks he will do it better

Hahaha

Why is that?

Igot1 too I was think the same thing, Lazy bastards could b catching studs rn

Jackson Allen Im sorry...all I can imagine is someone getting buried under that avalanche of studs. Real safety hazard. Thats why they push out the caution gate. Nobody’s company will pay employees to catch pallets of wood in their hands. Safer to let it all fall then play mop up.

JohnTGaming thanks captain obvious 🤦‍♂️

😂😂😂😂😂😂

🤣🤣🤣🤣🤣

As a Lowe’s employee I can confirm this.

Kek lol

Actually, it's the restrooms. Both customers and employees can be found in there.

And that is why you were only a home depot associate. If you were a real forklift operator you would know that that load is too heavy for how high he is lifting The dude just straight up doesn't know how to operate one

One stack at a time. Or take it down one board at a time. Hand over hand until the lift can handle the load. Lazy crazy and stupid should never work on the same task at once.

I can't understand why they didn't remove the upper stack first? And how long are the forks?

getting a forklift cert isnt that hard hell you don't even need a drivers license typically you need to check if your forlift can handle the weight its about to pick usually being around 2 pallets or 6000 pounds, you also have to account for slopes and speed your driving. needless to say the fact he picked up what seemed to be 2 bunks of wood is ballsy

Absolutely buddy! The way the load was received in and subsequently put away is everything! A Quality MHE Operator is also essential!

The Black Knight I was goin to say the same damn thing lol

They'll be there in a hour if electrical is aisle 55 and wood is 18

Random Hero lol they all watching the forklift show that's there whole store

That's what happens when you hire 50 year old Susan's who couldn't tell the difference between a Phillips and Flat at a hardware store, old women need jobs to but that's what JC Penny's is for

Actually aisle 18

That's how it is when you drive a fork truck I drive one at work everyday and people are always telling me what to do, and most of them aren't certified to even drive a fork truck, it's retarded

Yah, nobody advised Him to do it correctly. He was the guy They all wanted to get rid of.

🤣🤣🤣

This is why 1 out of 20 register are open

😂😂😂😂

it's a minimum wage job what do you expect? no one gives a fuck when they get paid like shit lol. It's a shit job for shit pay

Lmao have you never had a job? You see something like this going on you're allowed to watch, and you are probably going to

@@Ruuku1 agreed

I go to depot

That is the safety team.

Hahahaha

Jim Beshears I just throw the warped and split wood on the floor, so tired of this junk

GUARDIAN702 I work for lowes I'm lumber and I been there 2 years now. And I'm tired of piece of shit like you ! You want straight Lumber ? Pay the fucking price for straight Lumber and don't be picking through our #2 And #3 grade boards and throwing what you do not like on the floor. I'M SICK OF IT. I have to pick up shit all the time because of ass holes like you. Fuck you go to home depot or something and do that shit or buy #1 Grade.

Jim Beshears ahhhhh........ Had ta be you that wanted a strait one

GUARDIAN702 how about I come to your house and tip over your bookshelf, TV, and smash your game console just to even the score? You throw half a bunk on the ground just for one piece of wood? Dumbass. You're the guy we talk shit about in the break room.

cmndrkool321 You talk shit about straingers in the break room? Your probably single. If not you get punkd by your chick. Your not gonna win in here dude. Youguys restock some fucked up shit. This whole team in this video fucked up.

So why not place ladders, cut and open the plastic. Manpower it with those 8 extra employees. Bring it down one piece at a time

@@miltonperez3421 should have lifted one bundle, rather than 2

@@miltonperez3421 Kinda did that.

Whoever the jackass that was directing him how to do it was annoying and didn't know shit! Telling him to tilt the load foward when you're supposed to tilt it backwards so all the weight is towards the forklift. He probably would have been fine then. I just wanted to jump through the screen and do it myself

Should have taken the top bundle first.

You know shit 🤡. But feel free to continue showing up with your shitty attitude moronic commentary.

they needed more

they needed a few more when they put it up.

Jeremy yes they do when his a Mexican drunk

They needed a new driver

There's probably a bunch of customers roaming the next aisle completely unaware because all the employees are watching the forklift

Lol he’s good

Because the forklift operator was a total idiot. The clapping was probably meant sarcastic.

izzi that's my hero!!!!

Dude's a weirdo, walks back and forth looking pretty cracked out. He's probably that white man in construction that sparks a ciggarette every hour

Richard van Pukkem The strapped ripped it wasn't his fault it was more like a defect

Understatement of the century

I love when people do that when im on the lift, I'll just slam the forks down, pull the brake lever back, jump off and go here you go, you wanna do it? They go umm no, and I'll go good then stfu and go away.

@@english_muffinss I did that a few times so far and still get a laugh out of it every time ... I also get a laugh when people tell me I don't know how to drive a forklift yet I operate them with more skill then other's who have years more experience than me ...

They could have strapped those 2 pallets together , on each end ( the 2x4's are 8' at least ) .go up on the side with a Raymond Order Picker , keep pressure on the load . ..could have been avoided .. no ?

@Dr Pepper Kev actually that's the job of the machine operator

If your already fucked your not gonna save it , swallow your pride and move on to anthoter fucked up day only at lowes lol

I seen at least nine

Better add 'teen' to the end of it!

Richard Wolfe I work at Lowe’s, that is the true mystery

Anyone would stop and watch when they know something is going to happen

Technically a forklift only needs one spotter. Those others ought to get back to their department.

aulani C Even if u can find someone, they don't know anything

They usually take off running when you make eye contact at my store.

whatfreedom7 this is so true. I hate this store. It's run by post highschool grass. Who's don't know what work is.

EVER lol

aulani C I work at a Lowe’s my store is strict on costumer helping

Agree

Is that what he said when he lost his dads fortune ? And got in all that debt with russian mob ?

👀🤫

That's because none of those Associates work in the electrical department. Just because you work at Lowe's doesn't mean you're going to automatically know every department. They all looked at each other because they were finding the electrical associate. He was on lunch at the time of place.

Good Vibes you were probably the bald associate trying to defend yourself lol

I couldn’t understand what the person said on the PA system. She must have been black

I WOOD've...

A lot of people? It's a big ass store, usually.

They weren’t working.

Josh Stratton I know. Every time I am looking for help. Nobody is around

Josh Stratton ;LETS all just stand around and let the customer use the self check out lane!!!

It’s the same with me too. Fortunately, the only accidents I had with palletised merchandise, was when we were closing for the night.

A spotter isn't a bad thing but they should also be an experienced operator. Actually even more the the guy on the machine. Giving less experienced operators get some time operatoring is also important. But there is way to many here. I'm a Forklift driver and from time to time I ask a spotter to help out. Especially when there's a lot of people walking around on a busy dynamic loading dock. Or in a retaill situation like this. But I pick who I trust. And always they have to be good operators themselves.

​@bluegrassman3040 that good to here I'm glad you haven't had to many Accidents after what a year of operating. There are operators that have had there ticket fir 10 years but only drive a couple of times a week or even less that can say they have never had an accident. But it's relative to the Hours of operation that makes it impressive or not. Otherwise it doesn't really mean anything to say you haven't had an accident. So what how many hours have you operated for example. Tell me that after operating for 40+ hours a week then I'll be impressed.

Dark Horse you guessed it

Well, I can't blame them, boring ass job lol

Lol

Lmao

This doesn’t occur at any Amazon warehouse, their employees don’t even have time to use the restroom to pee! Why do they hire all these lazy asses all the time?

hairoftehdog. reminds me the city of phoenix one working eight standing around when jobs done they all start saying man that guy works hard lets go get a beer

they got rid of all of them now the left are pissed they want a revolution

Supervisors

You are A dumbass lol

Mystery Buyer Exactly

Mystery Buyer that's what white people do they stand around in observe there noisy people

Mystery Buyer poor management not telling them to get to work lol.

thats what i was thinking i feel so bad for the kid. I mean forklifts aren't this hard really but you need experience. poor guy has all these people watching and can probably barley think straight

Gold Channel Yeah, and the blacks are at home not doing shit.

Based & redpilled

EXACTLY!

@@jasenrock whoever was directing him was an idiot telling him to angle it foward and he ended up pulling more out from the bottom. Plus you never angle it forward you angle it backwards so the weight transfers towards you. He probably would have been fine then

@Jack Mehoff U Said it brother! Who the hell in their right mind would have told him to lean the forks forward, that guy giving directions WAS, and might still be, an IDIOT!

The forklift operator didn't center when he picked it up so it was off balance to begin with.

You're supposed to know what you're doing.

Daniel H come.to the one in Wooster Ohio. We got a shit load ready to help

ghostdasquarian I live in a commercial area so any hardware store around me has an employee around every corner asking if I need help.. so annoying

i use to work at lowes. i can assure you each location has about 50-60 employees on the clock at all times. but 30-40 of them camp thier whole shift in the break room

At mine there are like 20. When it's 9pm you see all the workers cars. They have so many employees. Wal-Mart down the street is richer and only has 1 cashier and stocker

They bracket town for everyone safety

Ryan Oldham, so sorry, sir. I WOOD've helped you, but I was helping my manager.

Not all of us stand around. Our policy at my store is to run to get it even if it isn't your dept. I'm a pro service loader. I have run across the store to hit a button

@jason Patterson someone put both stacks up there at the same time. The top stack is too high for the lift to reach it.

He's not even up high

James Foskey how is it too high? That’s easily reachable. You could definitely get the top stack without getting the bottom because of the runners underneath the bunk that separate the two. That’s the entire point of them so the forks can easily get them

No the problem is the lower bunk had came unbanded and he couldnt get under the top one without further messing the bottom one up. So he unfortunately had to do this. I dont know why it couldnt wait until after hours

@@jamesfoskey2804 nope it isnt.

hes the manager lol

Yeah I blame that idiot too. Giving him wrong tips. Should’ve had an extension or should’ve moved forward too push the load into the mast then tip the mast back

I know lots of people who have driven fork lifts but never a fork truck..... Is that like a truck that delivers forks? And the guy in the blue is the idiot.

Jason Y he wasnt giving him tips to save the load he was giving him tips on how to let the load drop as safely as possible. No driver was gonna save that from falling so he was making sure it was done in the safest way possible

He was a manager and all managers at lowes is required to be trained on all power equipment incase they are needed.

they're all boomers lol

Miguel E that shit gets intense with those 2 bys

🤣💯

@KMac 💯

@KMac utube are you a good person by living waters

Lmao! True statement.

Lol the home depot bend.

LOL!

YEP, they sure do..

ROFL

Hmmm, tell us what you WOOD've done different...

Right. 😏

Yeah, I was wondering how high his forks can go. Why is he picking up 2 units with such low backrests, especially 2 units with a rolled unit on the bottom with no banding. I would have done either what you said, but if the forks on that lift can't go that high, I would have gone all the way up on it, and tilted all the way back and then lowered it. The backests will keep the bottom rolled unit in place and the top unit should be just fine. I work at a lumber mill, have driven a Hyster XL for 6 years, and have dealt with MANY rolled units of lumber.

I kept saying tilt back, tilt back, some manager said"yeah go ahead and tilt forward

@@jhawk870 true it looks like he coulve just taken the top bunk off But the fork lift should be able to get to the top shelf

Magregor Swift You need help finding some tools? No wonder this generation always wants a reward for anything they do

Naw...

Magregor Swift Its sad being that lazy like you. Can’t put their brain to use for simple things

I work 14 hour days...

U must bored...laying around like can cause bed sores

I literally just thought that out loud, it's common sense I didn't need to be told not to do that, the shit just look dangerous asf

I worked night stock at Lowes, and I have never attempted to lift more than one bundle at a time. The last thing you want to chance is a complete collapse and going over the load limit of the forklift. Also, one wrong move and you could have multiple collapse of the racking, it doesn't take much. Granted that the lumber is on cantilever racking, but the adjoining racking can still be adversely affected. The closest thing I had to a similar situation, was a pallet of disassembled wheelbarrows that started to come apart up in the top-racking as I was lifting them off the racking to bring them down. I managed to save the situation, with no help or onlookers.

My boss told me never carry two crates stacked on each other. Didn’t listen to him and I learnt the hard way 😂

lowes is a shitty place to work. I work there.

tay gai that’s what you’re worried about? They get paid $10 an hour this took about 5 minutes so they each wasted about a dollar and you’re seriously telling me that if you worked at fucking Lowe’s and this shit happened at your work you wouldn’t go watch that shit fall too quit getting butthurt about people with minimum wage positions

Jiju j no. Wal-Mart is the shittiest place to work

Robby Leonard for every $1 they waste the company loses even more.

JonFFavale no they just lose the dollar they wasted

Yeah especially if you wanna get harassed my illegals

You ain't saving shit and you sure as hell ain't doing more

@@Maxim_74 okay minecrafter 😂

@@ResurrectMee Don't be mad I'm telling the truth.

@@Maxim_74 okay 😂

Ryan Butler lmfao

Lmao exactly, i never knew there was that money employees there at Lowes. Smh

Ryan Butler customer assistance was called and nobody moved. Lol

You that's a good point I've ever only seen the 2 cashiers and the one person in the paint section along with the random guy walking around pretending to work, never this many

Ryan Butler facts

lmao

This is accurate

That's the only way to do it! Why show up with the right truck lol?

HJW Pumps and the it’s the bed with the side step built into the bed of the truck so it’s like 1/3 less space then normal

bob knar legally you can't work at lowes or Home Depot unless your 18. You must be 18 to drive lift trucks. Yes it is very nerve racking to drive lift trucks for most of us. Doesn't mean I won't do it but I don't like doing it. Maybe if you're comfortable doing that kind of work and you don't really care that's great but when you work part time till you can start a real career you get pretty stressed having to do that kind of stuff. It's the companies faults for improper training. Why is it all the safety training is on the computer?

6 people there watching , and only one guy working LMAO 😂 😂

No kidding, at least the operator was actually working.

That's why paying people by the hour is a joke

Don't fire the spotter. There's supposed to be someone (ONE person, lol) watching the aisle adjacent to this one while the forklift guy is pulling the lumber.

Maka'ainana I was thinking: hurry up and fall, i don't have all day, how long is this video?

Maka'ainana Because there is NO " tilt up ".......its " lift up" or it's " tilt back" ! That's like saying "raise it down" !

I was thinking the same thing. And then some dumbshit tells him to tilt down and then bring it down. No tilt back then lift up a bit and back up some so you’re not riding the pallet below. Wtf.

Dell Scotten bro, do you even lift? As in forklift lol There IS an option of tilting up or down, you know. Granted, idk if this specific lift has said capabilities, but I'd figure it does

Me, while questioning why not take the bundle on top off first.

This turned out to be a good tip. Hope you followed your own advice.🙂

Manager be like, WOOD you all move back

Daniel Jimenez fuck I hate lazy fucks like them.

🤣

Outdoors Minnesota In a real lumber yard the workers wouldn't be standing around watching like this either lol

Cameron Peterson nope

Outdoors Minnesota I hate moving 2x4 8's. At least they don't take long to restack.

John Riley I typically don’t build lumber loads unless we are slow that day, I work with engineered lumber such as ijoice and lvls which are anywhere from 6 ft to 48ft. So moving 2x really isn’t that bad

Outdoors Minnesota I'm in pressure treating. All of our bundles come from the mill so the only time anything gets stacked is if it gets dropped. Those untreated 2x4's just love to slide around lol.

im going on break dude

Exactly what's wrong with everyone these days. You go to work but expect to get paid just because you showed up... take a little initiative. might get you somewhere..

I wouldve walk away long before it fell

Will McGowan pretty sure you don't get a job at Lowes to work on your serious career

Scott Riggs I've clearly offended you and your lowes career

Yep and that one guy clapping especially

If they were to get closer, they could have been hurt.

I agree. Those bundles are way to high. If they need more room. Let me do there job and show them how to make room.

Where I'm from, they are usually stacked about 5 high

This is actually standard practice. I worked at a Lowes lumber department for six years. The actual problem here was attempting to put a "rolled' unit on the stack with another unit above it. You just don't do that. The rolled unit needs to be placed on it's own cantilever rack, or worked into the active bay. The person who was working was an idiot.

In Home Depot we stack 6 high and sheet rock 12 high

Yes

Mr Leon sometimes lifts can’t reach that high. We used to be forced to do that at this country rural place where they didn’t give a shit about our safety. Just work work work.

Mr Leon probably would've been for the best, yeah.

Right? Something isnt right though. Both pallets got up there, but they can't get them down? If they put both up with the same lift, then it should be able to get both down. Maybe they hand stacked extra 2x4s on later to make it heavier, or used a different lift last time to put them up. As another poster wrote earlier, just about everything that could make this video a fail was done. This was the lottery fail

Mr Leon YEAH A LOWES JOB APLICCATION

Mr Leon same thing I said... Or had another forklift on the other side ready to catch the good bale of 2x4s so you can just focus on the faulty one... Idk

UnitedWeGame lmao your right

Yep, it WOOD've made me nervous, too

Scrapyard24c yay!!! Salsa party on aisle 6.

Be glad it wasn't a case of Repel-All or Liquid Fence. One night, a co-worker came up to me complaining that he dropped a case of Repel-All AND Liquid Fence in the seasonal department, (I was working Tool-World). I helped him to clean up the super offensive mess (I have a "cast-iron" stomach) and he was ready to vomit. The birds in the overhead were awakened by the stench and started dive-bombing him. LOL

Mark Contreras someone its going out of the store with lots of free merchandise

Rofl this is the new version: Jenga Piss-cup lol

@@pws3rd170 piss-cup!?!?!

....and when he said "angle forward" you just knew that was going to shift the weight and cue the money shot.

I WOOD've done it differently

David Fubuster I love ace too, mostly because they have dog food too. Not enough lumber or materials for bigger jobs but ace definitely has the best employees

David Fubuster "ace is the place with the helpful hardware folks" I guess it's true.

Pt0wN973b0iI faded shades