2zz swap vs 1zz turbo - mr2 spyder / roadster

Рет қаралды 153,196

7 жыл бұрын

comparing the 2zz swap and the 1zz turbo conversion
Which is worth spending your money on???
turns out we need to do a part 2 of this video
the first part is a drivers opinion.
will do some side by side tests later .
sorry about the audio, i need to work on my audio skills :-(
My vlogging gear
Main camera - amzn.to/2tbhL5B
Wide angle lens - amzn.to/2tNaUx1
Fast lens - amzn.to/2sTkYVj
Bendy tripod - amzn.to/2u8TlqE
On camera mic - amzn.to/2tbjRCs
Off camera mic - amzn.to/2tbhW0R
Colin the Drone - amzn.to/2se5Sb1
GoPro - amzn.to/2u99gFr
Posh backpack - amzn.to/2rTuR4h
Posh phone gimbal - amzn.to/2u9740y
Editing laptop - amzn.to/2u8C8O7
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
music
Track: BVRNOUT - Take It Easy (feat. Mia Vaile) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • BVRNOUT - Take It Easy...
Free Download / Stream: ncs.io/TakeItEasyYO
outro music -
Cartoon - On & On (feat. Daniel Levi) [NCS Release]
• Cartoon, Jéja - On & O...

Пікірлер: 311

@SpyderLEE 7 жыл бұрын

What is your opinion... 2zz or 1zz turbo?

@jackarmando 7 жыл бұрын

Turbo! 2zz vvti, yeah oke 1zz Turbo 12 PSI VVTI = BOOOOOSTTTT!!!! 100% THORTLE 3K RPM TURBO BOOST 4K VVTI KICKS IN, or ofcorse a stock 2zz :/

@JEMHull-gf9el 7 жыл бұрын

a DDRP turbo 2zz

@guitariste47 7 жыл бұрын

I have read several time that the 22 zz, because of high compreesion pistons and also not excellent lubrification, has blown up many times; so apparently, the 2 zz nedd to be modified to be more reliable

@jackarmando 7 жыл бұрын

LockTest that was not the quastion 1zz turbo or 2zz

@SpyderLEE 7 жыл бұрын

Dominique Bovard to be honest the 1zz is the same unreliable , the conrods are like toothpicks. But when we are talking built engines then it's a different discussion. For that money then we can include the 2gr and the k20 😁

@mark_gearhart 2 жыл бұрын

Only discovered this car about 3 days ago and I've already plunged into the research rabbit hole lol. This was such a cool comparison! In the little research I've done, seems like the 2ZZ swap is pretty popular, aside from the 2GR-FE. There's someone local to me selling an '02 manual for 5G's but can't spend that money because I'm building a house lol. God I want one so bad!

@SpyderLEE 2 жыл бұрын

They have been rocketing in value this last year. 2zz is the easiest and cheapest. Better engine than the 1zz. 1zz turbo is easy to do and fairly cheap although conrods are a time bomb. Built 1zz turbo is really nice but not cheap. 2gr-fe is the ultimate but heavy and expensive to do. Honda k20 is quite pricey but the most reliable, can put perform a built 1zz turbo very easily. has a massive aftermarket following for 4 figure power. People are starting to do vag 20vt conversion kits now. Great value for money engine also with a massive following.

@markbrock4427 Жыл бұрын

@@SpyderLEE what do you reckon a Dec 2004 facelift standard roadster is worth, 35500 miles (80 since last year's mot) motd late June22 with no advisories, matching hardtop mint (soft top mint), tte style bar and a decent Sony Bluetooth stereo, recent Toyo's, oil changed yearly (only done 6000 miles in 10 years) Brembo pads... subframe mint/waxed, underside arms etc all painted black, stainless steel screws on under covers...never driven too hard or been out in the wet. Did 100 miles the other day and loved it but it's just not getting used enough anymore.

@Zeriel00 Жыл бұрын

@@markbrock4427 Damn that looks like it could go from 15K to 20K easily. If you hold on to it it will only increase in value.

@KrGsMrNKusinagi0 28 күн бұрын

its just so easy to do a K swap in them now to me its not really worth the 2zz swap anymore

@coherence_x54r 6 жыл бұрын

I played a game last night. Every time you said zed zed I took a shot. Just woke up. I lost.

@individualwiseman7266 7 жыл бұрын

Great vid! looking forward to the sequel, my spyder unfortunately fell victim to the pre-cat failure (hindsight should have done research on forums) trying to decide if I want to follow through with swap or go the turbo route. Keep up the good videos man!

@HumbleHonkingEnthusiast 7 жыл бұрын

Been waiting so long for a good vid on this very question

@tonymartin4539 5 жыл бұрын

My father past away a year ago unexpectedly and I kept his 2001 MR-S stock with 70000 miles and very clean. I've been wrestling with what to do?!! I also have a 96 Acura integra gsr stock that has not ran in years, but I love! Life and work has kept me preoccupied but I need/want some suggestions now!! Thank you! By the way.. First comment I've ever done on KZfaq So,,,,, I really care

@jimmytran5328 5 жыл бұрын

Tony Martin I know this is pretty late response, but with 70k miles only. You should keep that 1zz and boost it. Make sure to really get new headers that won’t have those nasty “pre-cats”. You won’t know which MR-S will have the issue. My 2001 still has the “pre-cats” with no issues at 136k, but since it’s high miles I rather just swap it.

@justinaycock6652 3 жыл бұрын

Super late response but do a header to get rid of the failing pre cat and keep your dads car pure. Then K-SWAP that teggy and have a blast!!!

@user-rc9os6jl6b 3 жыл бұрын

Do A k swap

@trizguru7916 6 жыл бұрын

I've never been in a 1zz turbo. I have been in a 2zz turbo though and it was a blast. I do drive a 2zz Stroker. Another dyno to follow after some tuning for E85 and header. Come across the pond sometime for a drive. Love your videos!

@JRiverathatredCelika 7 жыл бұрын

i was thinking about getting an mr2 spyder soon and deciding between these mods also lol nice video and love the spyder man

@jefforymitchell5697 7 жыл бұрын

Get one, I bought one a few months back as my first car and it's the best decision I ever made.

@JRiverathatredCelika 7 жыл бұрын

also would you ever consider making a video on how you tuned the turbo ive been thinking of running a similar set up to your turbo spyder on my celica because they share the same 1zz motor

@jakemcmillian7163 6 жыл бұрын

Looking forward to the followup video. I'm in the midst of a sleeper corolla build. Leaning more toward rebuilding/upgrading the 1zz and turboing it. Mild low compression stroker kit, cams, valves, springs, and a medium boost turbo. Love the way these engines sound compared to the riced out civics I see here in the stated and you can't beat the durability of the zz engines.

@amrithharipersad4771 5 жыл бұрын

Would have loved to see a heads up race between the 2. Also great videos . super love the mods on your wide body mr2 . keep up the stunning work.

@SpyderLEE 5 жыл бұрын

Yeah me too. He has sold his now though. We was trying to figure a way to do it without losing our licenses lol

@amrithharipersad4771 5 жыл бұрын

Thank you for all that you do . The car Gods are happier to lol . Thank you Tons .

@boostedwankel 7 жыл бұрын

Im 1zz turbo (fully built bottom), with around 400whp. I plan on going k20, because I'm pretty much at the peak. I'm running 11.78@117mph this was in denver with a DA of 8200ft. Video is on my channel.

@ianedmonds9191 6 жыл бұрын

I'm an ex-gen 2 MR2 FReak and the old block on the 3Gs-GTE was good for some serious horsepower. I've noticed a shift in a ton of 3rd gen Mr2 owners to the K20. What gives? Could the 1zz block not handle serious tuning? Genuinely curious. Luv and Peace.

@boostedwankel 6 жыл бұрын

The 1zz cannot handle much more than 400whp. The engine just wasn't designed for it. The oiling system (bearings specifically), head flow etc. Even the 2zz's top level is only 100whp higher than the 1zz. The k20 can handle 500whp with stock internals. PLUS the aftermarket support for the k series is amazing compared to the zz engines. Funny thing though, I would still need the e153 trans for that, because the mid engine design is so hard on the newer transmissions. Even now with the lower power level I'm at I keep snapping axles. I have thrown around the idea of stopping on this car and building something else, that can handle high HP numbers without complex engine/ tranny swaps.

@AlexCell33 6 жыл бұрын

Any thing for sale?

@misaelmiranda5828 6 жыл бұрын

Bro that body kit though :) looks really good 😍

@TrackKingRacing 7 жыл бұрын

great video as always lee!

@SpyderLEE 7 жыл бұрын

Cheers Aaron 👍

@AliverMD 7 жыл бұрын

Thank for this video. Maybe you could do a dyno comparison for both cars? It'll show numbers and will be a better reference for us MRS viewers.

@sh4branze 7 жыл бұрын

How about comparing the wide body to the OEM set up.Offsetting the wheels that much makes me wonder if it effects handling negatively.

@JaycubL 7 жыл бұрын

That body kit makes it look way better. I would take the 2zz though, maybe supercharged.

@zokusharuuku1091 6 жыл бұрын

Thats my future plans with my mr2 with a large rotrex supercharger

@lilPOPjim 6 жыл бұрын

My dads 2zz is supercharged with a rotrex unit.. 350hp! The engine was fully recond before hand. With forged internals you can apparently go straight to 500hp but yeah. It was supercharged by the 2ZZ Supercharger unit found in the Corolla compressor. 235hp with uprated injectors etc etc.. Engine had done 150K miles so was down more than it should've been.

@margaretthompson6869 8 ай бұрын

thanks for the detailed comparison , i just love the 2zzz saw one with VictorRacing active wing it was flying on the track .

@SpyderLEE 8 ай бұрын

They do scream

@pjay3028 7 жыл бұрын

Excellent, side by side tests please, soon as you can. Maybe include a standard car too?

@austinmelville1903 6 жыл бұрын

Surely the best looking mr2 spyder out there!

@shnazzle 7 жыл бұрын

another great vid Lee!

@SpyderLEE 7 жыл бұрын

Cheers Patrick

@MrGeno1951 5 жыл бұрын

How about the other Toyota engines? The Celica- or the V-6 Camry? We all like strong torque at low revs. Which is the best non-turbo choice? Thanks for this video. Very enlightening.

@markmrx 7 жыл бұрын

mate, you should plug in an obd2 reader, load up torque and turn the logging on with rpm & speed. Then when you do your side by side you would have some data to run off too.

@SpyderLEE 7 жыл бұрын

Good idea 👍

@NipponRacer2 5 жыл бұрын

Hi, and thanks for the nice video 😁👍. We will buy a 2zz swapped MR2 next week on a short trip to the uk and take it back to our home in Germany 😃👍. Waiting for more videos of your MR2. Best regards

@SpyderLEE 5 жыл бұрын

Nice. I’m starting to think 2zz turbo 🤔. Maybe winter project

@NipponRacer2 5 жыл бұрын

SpyderLEE 2ZZ Turbo sounds interesting, must be a real rev machine with VVTI and Turbo 👍. We are relatively new to the MR2 W3 and collecting all stuff we could find 😬👍. My wife and me saw on German TV, on a „car buy show“, for us , the first a bit lowered MR2 5 years ago. My wife never get out this picture out of her head, that the stock MR2 W3 could look much better then the a bit boring looking stock MR2 with only suspension and wheels. Last year we watched again many bestmotoring videos, of the Spirit MR-S and we were absolutly exited what this car could do on corners against much more expensive cars. So my wife decided to buy a2zz for her self. I am only the consultant👍😄,but I love the car! We will have to to do some things to get the car running legal on German streets. If you ever come to Germany to the Nordschleife or so, let me know 😃👍

@SpyderLEE 5 жыл бұрын

Yes definitely. Enjoy the car. 👍😀

@thomascocks9136 7 жыл бұрын

I got a 2zz aw11, goes great in that and I'd imagine it'd go just as well in a spyder. Driver in a 1zz turbo and it's much better than a stock spyder but a 2zz is much more sporty and track orientated like you said. It's more exciting and the power up top is just so fun. And to me the 2zz is the modern 4age and what better fit for the modern mr2...

@guitariste47 7 жыл бұрын

i had a aw11 with the 2 zz, brilliant engine, but for street use, i would have liked more power at the low revs; i now have a spyder with the original motor, so i would like more power....

@thomascocks9136 7 жыл бұрын

Yes it is an engine that you've gotta be going at least nine tenths or you might as well not try. But i found that similar to the 4age and I like that about it.

@bobfranks6445 4 жыл бұрын

No it would go better, the lightest AW11 weighs at least 65kg more than the heaviest Facelift ZZW30 and up to 95kg more than the lightest ZWW30 without AC etc. Plus the MK3 is more aerodynamic.

@shinyparts 7 жыл бұрын

1ZZ-T for me, mine won't be a track car so its good to have usable rpms further down the rev range and as noted in the video, the 1ZZ-T was dialed back to 6psi rather than the higher 12psi boost - you can't vary the power with the 2zz.

@CJ-pe5dl 7 жыл бұрын

Nice comparison guys. Looking forward to the #2 in the side by side. For me 2ZZ. Interested to know how many kms each car has done to date.Love the rear spoilers on Spencer's car. Cheers Colin

@zokusharuuku1091 6 жыл бұрын

I cant wait to 2zz my mr2! Ive got a gts celica that i just don't drive much anymore and im saving up for the swap now and im really excited to see the differance

@SpyderLEE 6 жыл бұрын

Luke R it’s a good choice mate.. 2zz out of lift is similar to the stock 1zz.. in lift, it’s an animal

@GameTieTV 7 жыл бұрын

dammm ur MRS looks amazing!

@cxbra 5 жыл бұрын

2zz all day! The turbo 1zz will make good power and torque and should be faster than a 2zz.. but I like NA engines and reliability over anything

@tonym9450 3 жыл бұрын

@Mr420Man my 2zzge at 217k miles disagrees

@BlatentlyFakeName 3 жыл бұрын

@Mr420Man They need a stronger oil pump if you are going to be hammering the higher cam a lot, as well as an oil cooler. It's quite a well known thing in the Lotus community. But those cars get raced/tracked a LOT.

@cxbra 2 жыл бұрын

@MulaRose True, but luckily my 2ZZ is in a street driven XRS so I only hit lift for maybe 20 seconds in a whole day haha. I would get a Moroso oil pan, and oil pump if I were going to track the car for sure.

@all_out_of_bubble_gum Жыл бұрын

@Milan Rosic which Code does a after 2006 2ZZ have? Would a 2.0 VTEC be much more expensive?

@all_out_of_bubble_gum Жыл бұрын

@Milan Rosic thanks mate!

@GeekTherapyRadio 7 жыл бұрын

Just bought my first MR2 Spyder. First Japanese car, in fact. My daily is an Audi S5 4.2 V8. 354hp...good stuff. But you know, in my opinion, I'm having a TON of fun with my unmolested 1zz. It's plenty for my purposes, and it's really fun feeling that vvti kick in up around 5,000. Almost like a turbo. I'm sure a 2zz is a blast...but I'm having a ball with 138 ponies.

@SpyderLEE 7 жыл бұрын

Geek Therapy Radio they are a lot of fun... but imagine your Audi at 500hp and that's the spyder at 300. fun becomes a whole new level 😃

@R1Looter Жыл бұрын

Man that body kit with the color looks amazing. What body kit is it?

@farmerfloyd1 6 жыл бұрын

Have a 70 510 Datsun with Honda S-2000 swap with nisson 300 bimbo brakes bimbo brakes. lowered on 280 shorten struts. Turns 9500 rpm, have had 6 years, weighs 2100 lb. 250 + hp turned 12:71 113. 6 mph Just did the rally from Chattanooga to the Mitty at Road Atlanta 153 miles across Geo on March 26 to do laps at Road Atlanta. 121 cars finished 2 after following a GT1 Mustang convert who knew the road. Could pass him at will but dont know road. had a great time. did some 135, mph passes. Yellow Datsun 2 dr. farmerfloyd.

@bobfranks6445 4 жыл бұрын

Most 2ZZ conversions don't get anywhere near what you'd get from say a stock Corolla T-Sport or Celica 190 which vary from say 182-192 depending on mileage/looked after etc. I saw one Dyno'd to 195 but it had a PFC, All PPE exhaust, matched manifolds, bored throttle body etc. The three others I've seen made no more than 180. Using one of those cut shut exhausted the conversion places are pushing is a waste of time. You might as well rebuild a 1ZZ with Crower cams and better internals for less money and make 175bhp..easily on yellow injectors (plenty of evidence on Celica forums and Spyder chat as long as the exhaust is decent. If you turbo, compared to a good 2ZZ you may have 180-200bhp on mild conversions but a extra 40lbs plus of torque....makes a big difference in how drives. The old TTE Turbo conversion pulled like a V8 from 3000rpm in third, try that in a 2ZZ it just bogs like your grandads Corolla.

@lmenzol Жыл бұрын

Exactly what I’m planning, forged 1zz. 2zz boys always cry when you tell them these truths

@zahemi914 6 жыл бұрын

Need your opinion, being a go-kart like driving feel, is it normal to feel every bit of the bumpy ride. Is it because of its hard chasis.?

@gthausde 7 жыл бұрын

Nice video, ive got a k24a3 in my garage for a swap :)

@bob1233215 6 жыл бұрын

Quick question what will be the extra work to convert a stock MR2 with SMT transmissionto a 2ZZ with 6 Speed transmission Celica ? Any ECU or any know possible issue or extra work ? I'm asking because the SMT is much easier to find and more cheaper then 5 Speed transmission. Thanks.

@rkd350z 4 жыл бұрын

k20 mr2 here. love the 220whp and goal is to crack 300whp N/A

@SpyderLEE 4 жыл бұрын

Nice 👍

@rolldog82 4 жыл бұрын

What about the 2zzge supercharged from the lotus elise? I seen twin charged 2zzge supercharged and turbo so fast. But I like k20 swap also. What you think

@kylefenske2498 2 жыл бұрын

I wish I could put a turbo on my 1zz ,or do a 2zz turbo but sad truth is that in California in the United States it's legally impossible street wise I'm very thankful to see your vidios

@ericwaltrip6184 4 жыл бұрын

What kit is that? Can you do a supercharged comparison too?

@yeesenchai 6 жыл бұрын

Needs a K20/24 hybrid in there but a 2ZZGE is all cool too.

@mikenefkens6626 7 жыл бұрын

Standard Denso injectors should be ok up to 240ish I believe? my TTE kit flows plenty of fuel at 9psi. Cool vid btw.

@danielc7737 2 жыл бұрын

who makes the body kit on the turbo 1zz? Looks badass!!

@MsFilmiki 5 жыл бұрын

I want to put supercharger in my celica 1zz instead of 2zz swap, in Poland cost is nearly same around 2.500€ but i think supercharger is better

@threepotMR2 6 жыл бұрын

This is a real nice video! 2 awesome cars, and you both seem to keep your feet on the ground. Its a tough decision... putting a complete celica/corolla engine in is the less troublesome option and get the super exciting top end zing. While the boost is more tricky but is chunky and characterful but a bit of a liability. I'm really not sure which route to go. I've always fancied doing more turbo tinker time - fabrication and control systems but I know its going to come with its trouble. Yet i've had 2zzge power before and its totally exhilarating.

@SpyderLEE 6 жыл бұрын

threepotgtti to be honest between a stock 2zz and basic boosted 1zz, it is a tough decision.. i personally like boost over revs. It's a bit of a personal decision thing. And. Most important is the final power goals. Boost will always win with power goals

@threepotMR2 6 жыл бұрын

Thank for the reply Lee, I've noticed you mention your using a TD04, I was thinking about using a TD05-16G, along your travels have you picked up any guidance/wisdom about turbo sizing? This is something I know nothing about. Also by early march I will have finished building my new garage/workshop, then the next project is to make my MR2 a bit more savage. I was thinking about vloging the whole conversion/fabriaction/electronics project, if you are near Cheshire maybe hook up. I run a company repairing 4wd ECU's called haldexrepairs.co.uk and a friend owns a local rolling road tuning place called revlimittuning.co.uk/ which could come in handy for some feature videos.

@SpyderLEE 6 жыл бұрын

threepotgtti I'm not great with turbo sizing. Mines is a td04 with the larger compressor housing, I think it's a common mod with the impreza crew. More power but still quick spooling. I know of td05's on higher powered 1zz's 350bhp sort of builds. On sub 300 though you want one that quick spooling so you get hardly any lag, so a smallish turbo is best. I'm doing some traveling around next year so see what happens. I'll be on the lookout for a tuner at some point for my new big power engine 😉.

@nb8c_fd Жыл бұрын

Hey mate. I know this is an old video but hopefully you still get the notification. If I were to turbo my MR2, I'd probably only run around 5-6 PSI for the reliability. If you had to guess, how much do you think would 5-6 PSI of boost affect the longevity of a 2003+ 1ZZ? I'd like to get at least 200-250k miles out of the engine, but I fear that even a small amount of boost would make that unlikely. I don't know too much about 1ZZs.

@niels3591 7 жыл бұрын

I have a 2000 MR2 that I have been driving with 6 psi turbo for around 150.000 km ( over 200.000 on the clock) with great reliab ility so turbo and reliability is also a question about being aware about that You are driving a tuned car.

@guitariste47 7 жыл бұрын

what turbo kit do you have on it ?

@kenrossaukrsa 5 жыл бұрын

4AGE supercharged engine with Mitsubishi Td-05 turbo or the Toyota 1.3 16v turbo engine with TD04 turbo or ko3

@malrofo 6 жыл бұрын

Kinda wanted to turbo my 1zz matrix

@feyergaetan 7 жыл бұрын

amazing video keep up the good work =D

@Pube83 4 жыл бұрын

In the usa, a Honda K24a2 is $750 (or less if you find one from a yard or wrecked tsx), say another $800-900 for a 6spd LSD transmission. About $2,000 for a plug and play swap kit. So if you DIY you can have 225+ horsepower at the wheels (175tq) for around $4,000 give or take. Zero to 60mph in the 4s and 100mph in under 10s. All with Honda reliability and the best NA 4 cylinder in the world. You can get it to 265-275 at the wheels for another $1,500 using a ported k20z3 head, ported intake manifold, etc. I've been on the lookout for a spyder but they're rare and increasing in value...I just want one with a bad engine and clean body for under $3,000.

@CRGB-ec3vu 6 жыл бұрын

2GR for that glorious sound

@nornibres 11 ай бұрын

I think I'd go with the turbo. The torque and mid range are great for city driving which is where I do most of my driving.

@Michaelajacksonfilms 2 жыл бұрын

Thank you.

@spotterink 3 жыл бұрын

Have you done the sequel of this?

@johngivens1626 7 жыл бұрын

Might be a bit of a long shot, but where do you know where the heating control knobs in Spencers car came from?

@SpyderLEE 7 жыл бұрын

John Givens I've got the same ones mate.. if you can find Patrick chambers on the spyder Facebook groups, he sells them

@saiferrero6234 6 жыл бұрын

Hi mate where can I get a body kit from for my mr2 ? (Uk)

@Zeriel00 Жыл бұрын

I never understood why the 2ZZ is so popular when it's SO MUCH WORK to swap an engine for only around 40 additional horsepower, also the high revving engine with low torque just doesn't work on the street were you have to break a lot. For the same price you could install a turbo, injectors, Computer etc. you can do it yourself in a few days and tune it for around 70-80HP with the 1ZZ torque. No way the 2ZZ would come even close.

@infamousjuan7714 6 жыл бұрын

2zz turbo or supercharged? Thoughts

@darthtrader1027 2 жыл бұрын

Im looking at either a 2grfe or a honda K20/K24...

@johnrean2133 7 жыл бұрын

well actually because im living im dubai i prefer no turbo and many many ppl suggest me to swap to 2zz its going to beat nissan z and honda s2000 and all cars in same category even v8 mustang

@jeffpadgett549 6 жыл бұрын

Feeling like this is the hardest decion of my life right now

@cyruslever586 3 жыл бұрын

K series

@cxbra 7 жыл бұрын

2ZZ swap, HANDS DOWN.. You will be limited to about 200hp in NA form, but the 1ZZ is a flawed engine in stock form.. The good thing about it is that you can get a stock engine for like $600, so you can keep swapping them in if you need to haha. Its hard to beat the adrenaline of 8250rpm!

@michaelyoungblood2639 6 жыл бұрын

bad ass cars man I own a 03 Mr2 spyder myself I was wondering what the background music is called if you don't mind thanks.

@SpyderLEE 6 жыл бұрын

Michael Youngblood cheers dude.. kzfaq.info/get/bejne/n8Wha8J8yNDQY6c.html

@michaelyoungblood2639 6 жыл бұрын

+SpyderLEE Greatly Appreciated Bro!

@matraditz3954 7 жыл бұрын

2zz then when it becomes boring stick a compressor on top of it theres your low down torque but still got the response of N/A

@sleepwalker29 3 жыл бұрын

Everyone commenting saying they would get a 2ZZ and modify it missed the point. The point is the cost of the build. A 1zz turbo kit cost about as much as paying someone to install a 2zz. So if you had $3,500 what wouls you spend it on? A 350hp 1zz turbo kit on stock block, or a 180hp 2zz?

@HaHa-qk4lm 5 жыл бұрын

Is a 1zz turbo legal in the UK ?

@kevinjones3900 2 жыл бұрын

The American lads are using 1ar Fe and 2ar Fe engines the 2 ar is a Atkinson engine and needs different cams and re timing they end up when finished about 240 whp na. Maybe that's what I do next.

@Lookbusybuddy 2 жыл бұрын

Have you got someone with a super charger to compare to?

@DeityASMR7 6 жыл бұрын

hello, I have an MR2 Spyder NA the 1zz and I was just wondering how you installed the 2 step and if it's bad for my engine if I just use it for some flames...I have mine straight piped...

@TheRedRaven_ 27 күн бұрын

I owned one of these back in the day (2008), turbo kits were expensive as hell, very limited and unreliable for the 1zz, everyone was doing the 2zz swap to include the tranny.

@Kozuto98 6 жыл бұрын

what's the max boost I could do on a 1ZZ with an fpr, injectors, exhaust, cams, springs, and retainers?

@SpyderLEE 6 жыл бұрын

Kozuto's Games I wouldn’t go above 12psi on the high comp pistons. 10 is safer. Got to remember the rods are weak on the 1zz. I push mine as I don’t care if I blow it. I’ve got a spare engine

@Kozuto98 6 жыл бұрын

SpyderLEE awesome, thanks! I've been putting a plan together with a small T15 turbo for my Corolla.

@budojon 5 жыл бұрын

great cars !!!!

@pufferz6788 6 жыл бұрын

love dat bodykit

@captainjosue Ай бұрын

I have a 1zz turbo at 9psi boost and from 3rd gear and above after 4000rpms it pulls and climbs and continues to climb and FAST!!!!!!!!

@dwood2010 5 жыл бұрын

Thing sounds angry with 12 psi. I like it

@all_out_of_bubble_gum Жыл бұрын

Which Body Kit is that ????😮

@WeinessFilms Жыл бұрын

I recommend not having the music while driving so we can hear the engine and turbo noises. We're car ppl my guy, we want the good stuff haha.

@JAKEWJONES Жыл бұрын

Should we do the 1 zed zed or the 2 zed zed turbo!?

@simonblackburn6937 2 жыл бұрын

Where did you get the body kit ?

@jordandavenport7553 5 жыл бұрын

I mean 1zz is a bulletproof engine you replace the chain components it's fine

@randabuffer6562 4 жыл бұрын

Jordan Davenport no engine is bulletproof trust me lolol

@fortheloveofnoise9298 3 жыл бұрын

@@randabuffer6562 some military 1oems are

@Raevenswood 5 жыл бұрын

For the turbo on the 1zz did you have to build the bottom end with low compression pistons and what not?

@SpyderLEE 5 жыл бұрын

No it’s just a low boost setup. About 12psi. Stock engine is coping with it.

@Raevenswood 5 жыл бұрын

@@SpyderLEE thanks for the reply I'm digging your channel!

@SpyderLEE 5 жыл бұрын

Raevenswood cheers. Wish I had the time to do more videos.

@fatboy19831 6 жыл бұрын

I would put in an engine from an rsxs. The Honda milll is more reliable and powerful. Or I would leave it stock.

@turbo311 6 жыл бұрын

Has anyone used the Lotus Elise 2ZZ with the Yamaha built head for one of these swaps?

@mindspinn311 6 жыл бұрын

There’s a video saying the heads are different and I knew it was wrong. Now I cannot remember who it was, Regular Car Reviews maybe? He started the Celica GTS version didn’t have the Yamaha head of the Lotus.

@formulajuan5762 6 жыл бұрын

Every G designated Toyota engine has a Yamaha head. Yamaha helped Toyota with every wide angle port performance spec engine head. Yamaha and Toyota have worked together ever since the 2000GT, and Toyota even help Yamaha with their bikes, so it's a two way street. As for the Elise/Exige: The difference was the ECU. Lotus used their own ECU for their cars, which also happens to be flash tune-able, unlike the ECUs Toyota used.

@Cheeseypoofs85 5 жыл бұрын

same engine.. yamaha basically does all the grunt work for all of toyota's top engines

@MBAKERY92 4 жыл бұрын

for example i have mr2 spyder but i wanna swap with 2 jz is it possible to enouhg engine bay

@JR19k 2 жыл бұрын

@sebastianenriquez908 6 жыл бұрын

What's that body kit?

@sw6408 6 жыл бұрын

2zz turbo or k20a

@slybunda 5 жыл бұрын

which is better on fuel consumption?

@Daniel_BDB 5 жыл бұрын

1zz

@twrcrew8852 2 жыл бұрын

i kinda wish it was 2zz turbo vs 1zz turbo. that's what really makes sense to me to compare.

@undefeatedboxingfitness8598 7 жыл бұрын

cool car!!!!!!!!

@nothing_for_you Жыл бұрын

How about an 1.8t comparison

@StarkReality 7 жыл бұрын

With these cars being a little older you have to decide if the 1zz in the car is worth putting a turbo on. If the engine is using a lot oil, very common, you are going to have to do an engine swap no matter what. So that may sway you but the turbo 1zz does have the potential for more horsepower. If Toyota had done either of these things as a factory option the car would have been a huge seller. They really missed what we wanted from the car. More Power!

@SpyderLEE 7 жыл бұрын

I really can't understand why Toyota didn't fit the 2zz stock. It turns the car into what it's supposed to be. My 1zz is not the best, it's a bit smokey.. will be changing it sometime but I've got plans for something completely different 😉

@turbanelite 7 жыл бұрын

Oh please give us a hint at what your doing with the engine! Is it a 2GR-FE? :O

@StarkReality 7 жыл бұрын

Nice tease. Will be looking forward to seeing it when the time comes.

@thepodbaydoorshal 7 жыл бұрын

I reckon it is...

@pec1739 2 жыл бұрын

in south east asia where high humidity + heat, in a Mid engine package, i'd go 2zz over turbo

@wolfgangmozart8329 2 жыл бұрын

Still waiting part 2 sir

@zareefhaider6451 5 жыл бұрын

How about a NA 2GR FE (Camry v6) on this?

@forsakenfactory8413 5 жыл бұрын

Only if you want super rear biased

@NoResultsReturned 5 жыл бұрын

@@forsakenfactory8413 It's not bad to be fair. Still handles well. Here's my 2gr mk3 on the scales imgur.com/a/RuOrrSs 304bhp/ 275lbs. Pretty naughty

@zzracer 5 жыл бұрын

@@NoResultsReturned what is a cost to swap 2gr into it?

@3lbtrigger 3 жыл бұрын

what the hell is a zed?

@xxboxofmuffinsxx4252 2 жыл бұрын

Buy the one you can afford, save your money and enjoy it. Take it out to the track to learn how to drive it. Understand the car and how it tells you it's at its limits or needs to be pushed harder. Once you've abused your 1ZZ enough, think about what to put in it next. All the while make the tasteful modifications you like :)

@itheus 4 жыл бұрын

Can you tune the 2zz so it comes on cam at lower rpm?

@julianbryant1115 3 жыл бұрын

U mean to activate the hydraulic liquid pushing out the big cam, (vvti) idk that might be cool. The only thing i can think of is those locked vtec Hondas :) sounds like a big v8 with lope

@danieljordannicol9937 4 жыл бұрын

2zz for track work for me.

@broderp 6 жыл бұрын

2ZZ wins for me. From a maintenance and reliability perspective, I'll take the 2ZZ. Simply install a DD intake header, some Lotus injectors and drop the lift down to about 4k and that would be a killer combination in an MR2.

@BATF4P 5 жыл бұрын

You would be better off with the 2zz compressor for the lower down power.