3 AMAZING EXPERIMENTS | 3v Tesla Coil |

Рет қаралды 58,417

Күн бұрын

Plasma Channel on Patreon: / plasmachannel
We've found 3 incredible experiments you can do with a mini Tesla coil! All from the safety of your desktop. Wait till you see the third experiment. I've done this episode all with one hand, which was very difficult, so a like or share is greatly appreciated. Still having issues with me looking sunburned upon uploading!
Last episode 'DIY 3v Tesla Coil': • DIY 3 volt tesla coil ...
*signal strength follows inverse square law, not exponential*
We heavily encourage you to build along, however, we have applied for a patent for this design. This means you may not profit from, or sell, this design. Thank you! Do not run them more than 30 seconds at a time. You run the risk overheating your transistor/ destroying the circuit.
Music credit:
Background Track: Inukshuk - The Long Road Home [NCS Release]
Music provided by NoCopyrightSounds.
Listen: • Inukshuk - The Long Ro...
Free Download / Stream: ncs.io/TLRHYO
Entry Screen: Mike B. Fort - OOOTHERSIDE
Plasma Channel YT: / plasmachannel
On Facebook: PlasmaChanne...
I am also a television actor! Follow me on IMDB
My IMDB: www.imdb.com/name/nm6578948/?r...
Do not attempt to repeat our demonstrations, without prior knowledge of electrical safety. We do not hold responsibility or liability for damage or injury incurred by copying our results.
3 amazing experiments with 3v DIY tesla coil

Пікірлер: 154

@SERGEY-KACHAN 5 жыл бұрын

Предыдущие видео kzfaq.info/get/bejne/atR_m8-Xyreym4U.html -часть 1 kzfaq.info/get/bejne/gM2FiZiLq6vIo58.html -часть 2 kzfaq.info/get/bejne/nNiYhdxl3bSofmw.html -часть 3 kzfaq.info/get/bejne/ntubh85zsM_Ic4U.html -часть 4 kzfaq.info/get/bejne/i7qpmat5p6vOkmg.html - часть 5

@abdulrahmanal-smadi3571 6 жыл бұрын

Hope you get well soon Thanks for your efforts

@PlasmaChannel 6 жыл бұрын

Your well wishes are noted. Thank you

@WildfoxFabrication 6 жыл бұрын

I'm here again, to congratulate you on such an awesome video! great man!

@PlasmaChannel 6 жыл бұрын

I absolutely love this feedback. Thanks!

@baotchuong79 2 жыл бұрын

Thanks bro that's awesome!!!

@gstoe5560 5 жыл бұрын

I just finished my mini tesla coil and it is awesome! If you connect a lightbulb directly to the secondary and use instead of the door nob topload, it creates an awesome mini plasma globe thats much stronger than holding it near the topload.

@PlasmaChannel 5 жыл бұрын

That’s awesome. I love seeing people’s renditions of the coil. Mind emailing a photo?

@gstoe5560 5 жыл бұрын

Sure I'll take a picture of it tomorrow and email you.

@piotro1201 Жыл бұрын

What copasitors do I buy what should I shearch online to find them

@cooldude2074 3 жыл бұрын

Amazing video dude🔥🔥🔥 informative 100%, boring 0%. That's what actual content should be like🔥

@PlasmaChannel 3 жыл бұрын

Thanks so much! I know it would have been cool to take the globe apart, but honestly I didn’t want to. It was too beautiful to waste.

@GeigerCounterVirtualMuseum 6 жыл бұрын

Just found your channel, very cool and professional. Subbed and liked.

@PlasmaChannel 6 жыл бұрын

+Geiger Counter Virtual Museum we greatly appreciate that compliment. Welcome to the dark side!

@didakpram2975 3 жыл бұрын

Amazing

@didakpram2975 3 жыл бұрын

I love #2

@calumstewart6791 6 жыл бұрын

Your videos are so good , hope that your arm is okay great video 👍

@PlasmaChannel 6 жыл бұрын

The arm is a bit sore but fully healed now. Appreciate the sentiment!

@daveandrews6670 3 жыл бұрын

I like the globe trick,mini plasma globe..

@niar491 2 жыл бұрын

that's a cool radio ;)

@KeystoneScience 6 жыл бұрын

Dang, sorry about your arm :P

@PlasmaChannel 6 жыл бұрын

+Keystone Science I appreciate it brother. It will heal stronger than before, no worries!

@talonjuel9486 5 жыл бұрын

Hey my favorite channels

@talonjuel9486 5 жыл бұрын

Oh and about your 3v Tesla coil, if i add more turns on the secondary would it still work? Also sorry for your arm

@aaronvice1589 6 жыл бұрын

Also curious if ferro magnetic material generates oppisit lift compared to dia magnetic material(iron foil for ionic lift circuit)

@divyamtaneja6637 5 жыл бұрын

You are stronger,smart,intelligent and awesome

@PlasmaChannel 5 жыл бұрын

I appreciate that. Thank you

@mandydoncansil9606 2 жыл бұрын

Plama channel is cool channel 👏❤

@PlasmaChannel 2 жыл бұрын

Thank you!

@samirsolanki4132 3 жыл бұрын

Plasma future

@PlasmaChannel 3 жыл бұрын

Check out my newest videos. Way better!

@kartikeyakaushik4881 3 жыл бұрын

So farther the coils, better the energy transmission?

@maxcomputercare9986 2 жыл бұрын

Is breaking 2.5 Volt torch bulb (Filament type) when it is switched ON and kept close to a copper pot 6 inches away (distance is between torch and copper pot) ?

@jimmycharters2249 5 жыл бұрын

How can you levitate an object through a TEsla coil? PLEASE HELP!! YOUR THE BEST KZfaqR I KNOW...

@carlosdelossantos5115 5 жыл бұрын

Make the tesla coil produce higher voltages at higher frequencies and then hook up to ionic thruster

@cybergaming3919 4 жыл бұрын

look at this dude

@PlasmaChannel 4 жыл бұрын

Yeah. I wouldn’t trust that dude.

@cybergaming3919 4 жыл бұрын

just kidding..sir

@PlasmaChannel 4 жыл бұрын

I still wouldn’t trust myself. I literally wake up every morning and shock my hands with sparks because it feels good. Ya!

@cybergaming3919 4 жыл бұрын

lol..:V

@gstoe5560 5 жыл бұрын

If I power it from my bench top power supply what is the highest voltage I can put through it? Would it create larger sparks at higher voltages or just blow something up?

@PlasmaChannel 5 жыл бұрын

For extended use, 3 volts. But you can push 5 volts through it for 5 seconds at a time, with no damage. Don’t do much more than 5 second though, the little black transistor gets real hot and WILL break.

@weetarted3715 6 жыл бұрын

You just have to tell all .... How did you do it ..... Of course it was a wound gained in name of science and the PLASMA CHANNEL ..... Hope you heal up good as new .... ...

@PlasmaChannel 6 жыл бұрын

It was indeed in the name of ScIeNcE! At least in the name of human performance. I'm a regular boxer, and pushed the arm a little too much last week. Hyperextended it, breaking it!

@corywilson1938 6 жыл бұрын

Love it. Sorry you broke your arm man. What happened?

@PlasmaChannel 6 жыл бұрын

Boxing, and lost to the bag!

@thejoxter6315 3 жыл бұрын

Plasma Channel I lost the knuckle on my ring finger because I was punching the ground like the hulk cause I was a stupid kid. 🙃 So I actually have no knuckle there

@itsallaboutlearning5812 4 жыл бұрын

Pls explain the working of the spark gap Tesla coil all about the resonance and resonating frequency and how to determine and calculate it

@PlasmaChannel 4 жыл бұрын

I encourage you to watch my "Genesis Coil" video - it explains how tesla coils work.

@acmefixer1 5 жыл бұрын

I've heard about someone coming in contact with a high DC voltage, and the high current through the muscles causing them to contract, and that forces their body to lurch suddenly, possibly hitting something so hard that they break a bone. I got shocked with the 250V B+ of a tube amplifier and I thought someone had pushed me from behind. But it was only my muscles. And I luckily didn't get hurt...

@PlasmaChannel 5 жыл бұрын

Wow. You got really really lucky. In general, always keep one hand in your pocket when working with high voltages. This guarantees you never have electricity going across your chest.

@SIKHGT650 6 жыл бұрын

get well soon buddy

@PlasmaChannel 6 жыл бұрын

Thank you

@theplasmaprince8651 3 жыл бұрын

You should try wireless power transmission with the Genesis coil, and another large coil.

@theplasmaprince8651 3 жыл бұрын

Are one of the coils turned off during that experiment?

@shanusingh3656 6 жыл бұрын

hey can i use jst the secondary for wireless induction

@PlasmaChannel 6 жыл бұрын

In fact you can, as long as it is tuned to the same frequency as your source coil.

@cjschleusner 6 жыл бұрын

the first one looks brighter

@infamousbanter 2 жыл бұрын

I'm on SSDI.. I feel like tipping over you plasma candle..🦍💯✊💪☝🧐🤭

@mandydoncansil9606 2 жыл бұрын

I have questions I made that but I dont have capacitor like what you show I only have is 3kv ceramic capacitor. I try that capacitor but that is so weak what do you think can I replace that capacitor to increase the plasma, sorry to my English cuz iam 15yrs old Filipino I hope you understand

@PlasmaChannel 2 жыл бұрын

Hello, you need a capacitor rated to the same capacitance as what I used, in order to get the same results. VOltage is different from capacitance.

@mandydoncansil9606 2 жыл бұрын

@@PlasmaChannel ahh ok really need to to find that

@aaronvice1589 6 жыл бұрын

Hey for a subscriber request will you do the resonate coil shaped in a circle with two secondary windings 180 degree apart and form a mechanical rotor in the middle powered by a bifolar coil with neodymium sphere magnet embedded in the rotors centrifugal point. I wanna see vacuum in center rotor cutting away frictional contact. Sorry if I sound demanding sorry bout your arm too I subbed your channel very amusing.

@PlasmaChannel 6 жыл бұрын

Hi Aaron, apparently I never saw this comment. Sorry! I'll do some tinkering into this process and see what I can get. Thanks for the suggestions

@souravjb6143 4 жыл бұрын

Is it possible to make the AC Tesla coil using 12v 1amp ac supply , sir please tell me about the overall calculation

@PlasmaChannel 4 жыл бұрын

Yes it is, but you'd need a whole new powersource. 12 volts needs to be bumped up to higher voltages in the first place.

@souravjb6143 4 жыл бұрын

Can you please tell me about number of turns and gauge selection to make high voltage Tesla coil using 12 v

@Coyote0874 5 жыл бұрын

Just made a video on my channel trying one of these experiments ( I gave you credits)

@PlasmaChannel 5 жыл бұрын

Thanks! and great work.

@geniusminds6722 6 жыл бұрын

hey jay once i had made tesla coil but i have failed i have used 2n2222 transistor and 27 k resistance

@PlasmaChannel 6 жыл бұрын

Keep trying! I build many, many coils before figuring out the best way to build them.

@MLFranklin 5 жыл бұрын

Dats, cool! Sorry about your arm. Heal fast!

@PlasmaChannel 5 жыл бұрын

Thanks a ton!

@Seaprimate 5 жыл бұрын

You have to be careful with the light bulb experiment though. If the bulbs walls fluoresce green, that means there's a vacuum in it and you're creating bremsstrahlung x-rays. It's particularly low energy x-rays, which means your body is absorbing most of it increasing your effective dose.

@PlasmaChannel 5 жыл бұрын

It is indeed true. High voltage in a vacuum is inherently unsafe

@2100Warzone 5 жыл бұрын

Nonsense.

@Seaprimate 5 жыл бұрын

@@2100Warzone Sense.

@MetalKnifePunk 6 жыл бұрын

why might your coil work so much better than mine? I can only get arcs about 2mm long to my finger and the light bulbs are way dimmer. I am making a second attempt later next week though so would like to try to squeeze a bit more power out of it!

@PlasmaChannel 6 жыл бұрын

Did you use the specific racket linked in the description, the specific capacitors. Same number of primary turns and same length of secondary with same diameter and wire gauge?

@MetalKnifePunk 6 жыл бұрын

Plasma Channel my second one will use the same racket and other than that everything is exactly the same I wondered if that might be it thanks!

@PlasmaChannel 6 жыл бұрын

Ah, that may be it! Though, with other rackets, you should have more than 2mm of spark. Strange. Anyways the specific racket listed is the best I’ve found.

@MetalKnifePunk 6 жыл бұрын

Plasma Channel also thanks for getting back to me on my questions I appreciate it and I will let you know how mini Tesla coil mk2 works!

@PlasmaChannel 6 жыл бұрын

I only wish I responded sooner! You are very welcome. You used 32 gauge enamel wire?

@treasuretotrash2067 3 жыл бұрын

If you set your radio to the same frequency as the resonant frequency of the coil, shouldn't you be able to hear it much further away?

@PlasmaChannel 3 жыл бұрын

That is correct!

@dufuspuncher6969 2 жыл бұрын

I remember the last time I tried to hand a toaster to my ex in the tub...

@AlyshiaAMO Жыл бұрын

Any chance you know what caused the sounds you'd hear in the radio and TV when older cell phones would receive text msgs, and why don't we hear that happening with newer cell phones?

@PlasmaChannel Жыл бұрын

That's a strange one. I'm not sure, never heard of that happening. Possibly less precise bandwidths, and receivers that are out of tune?

@rahulgkhs 6 жыл бұрын

How to make it sing?

@farukgul391 4 жыл бұрын

You could use a NE555 and build a variable Oscillator. At Pin 5 you can use the audio signal to interrupt it. The output of the NE555 goes to a Transistor (for example D1650) or any other high power NPN. The collector is connected to the primary of the tesla coil, the other end of the primary goes to +12V (or more) but be careful not to use more than 18V if you use the power line for the NE555 aswell. You can use separated Powersupplies tho (for the 555 and for the primary) if you have done that you should have something called Audio SSTC

@andrewmead1434 6 жыл бұрын

what type of light bulb were you using

@PlasmaChannel 6 жыл бұрын

Merry Xmas! I used an ordinary 60 w (maybe 100 w?) incandescent bulb. Either will work perfectly

@cheebeeTV 5 жыл бұрын

we can use a 9volts bat or not?

@PlasmaChannel 5 жыл бұрын

I would not recommend 9v. It will burn out the circuit board very fast.

@zachandrobvermaasanddeatha457 Жыл бұрын

How does everyone get a injury like a broken arm or leg but I can't ever

@chris1newbury 6 жыл бұрын

which arm did you break?

@PlasmaChannel 6 жыл бұрын

That is my right elbow sir!

@redrokee1082 3 жыл бұрын

I hope you'll get soon

@TeslaExplorer 6 жыл бұрын

your arm heal up ok?

@brocifer5264 4 жыл бұрын

First time broken arm?

@damonjackson5857 6 жыл бұрын

Did you break your arm on a really big plasma arc?

@PlasmaChannel 6 жыл бұрын

You should have seen the arc, it was big. No, I broke my arm boxing. Got great news though, should be a speedy recovery!

@MREnderman1234 6 жыл бұрын

Plasma Channel the arc caused his arm to contract until his arm broke. That can happen to lightning strike victims

@amyferguson8790 6 жыл бұрын

boxing? you don't seem the type...

@carldonat8965 6 жыл бұрын

More like The Real Demon Jackson. Kinda scary.

@notnics34 6 жыл бұрын

AWWWW EEEYOU'RE SO CUTE WHAT HAPPENED TO YOUR ARM?!

@PlasmaChannel 6 жыл бұрын

Hyperextended it- broke the ulna!

@akashdeepsingh8308 3 жыл бұрын

So sad bro💪

@mundymorningreport3137 3 жыл бұрын

Bone breaks smart (usually) No video? Triple x says if you didn't get it on video, it didn't happen. Wishing you a swift and uneventful recovery. How many resonant coils do you have? you Know each one does not draw down the power from the transmitter. You should be able to power up a lot of them and "daisy chain" a long series of them. RIght? can you step the power down to normal AC? and set up portable power in the back yard or campsite? (all on 3 volts, AMAZING PLASMA POWER) Party on Dude, stay classy. Set up a remote tea/coffee/espresso cart without power cords limiting location and tripping people (could prevent broken arms).

@mocknugget 6 жыл бұрын

Why did'nt you count the musical tesla coil :(

@stonecold7945 6 жыл бұрын

How did you break your arm.

@PlasmaChannel 6 жыл бұрын

Overworked my arm boxing, got sloppy, and hyperextended it. I have been told it will be a fast recovery though.

@stonecold7945 6 жыл бұрын

+Disability Channel hope it heals soon😀

@isaacfield4436 5 жыл бұрын

What quilifications does this guy have?

@PlasmaChannel 5 жыл бұрын

Great question. 15 years of HV design, troubleshooting, and electrical construction. 2/3 of my knowledge is self taught admittedly, the rest from college level physics.

@rohitdesai69 3 жыл бұрын

How to turn off the bulb using Tesla coil

@paragjh284 5 жыл бұрын

What happened? Get well soon brother...

@PlasmaChannel 5 жыл бұрын

Broke my elbow by hyper extending it!

@sarmamasterslav4676 5 жыл бұрын

How tall are you?

@PlasmaChannel 5 жыл бұрын

5'8"

@sarmamasterslav4676 5 жыл бұрын

@@PlasmaChannel nice man i was just wondering, i love your videos tho

@PlasmaChannel 5 жыл бұрын

Haha. Thank you! New video drops this Friday!

@PelayanMu 6 жыл бұрын

what happent your hand bro ?

@greenthizzle4 5 жыл бұрын

PelayanMu he was beating his meat too furiously

@PelayanMu 5 жыл бұрын

why

@greenthizzle4 5 жыл бұрын

PelayanMu because he was angry at it because it "owed him money"

@PelayanMu 5 жыл бұрын

i am sorry to hear that

@brysongore7607 2 жыл бұрын

It was all going so well! I have worked around electronics and physics all of my life. You present this topic in so many interesting and fun ways and with a, 'can do' emphasis. I really enjoy your videos. Unfortunately, you've fallen into the trap of including, and I use this term very loosely, background 'music' whilst you're speaking. Why? It adds nothing and to me st least, it causes a distraction making it hard to follow what you're saying. Please don't! Sorry to see your arm is broken, hope things improve before too long.

@PlasmaChannel 2 жыл бұрын

Glad you enjoyed! This is a really old video of mine. I don't do the super loud music while talking anymore.

@nicktohzyu 6 жыл бұрын

music is waaaay too loud

@PlasmaChannel 6 жыл бұрын

+nicktohzyu darn, really? We really cranked it down this this time. Mind checking on a different browser to see if that is still the case? During editing our computer showed background music so quiet it could not be heard. Please let me know

@nicktohzyu 6 жыл бұрын

at 2:20 onwards the background music drowns out the voice. I am using the latest version of chrome on mac, maybe wait and see if other users have the same issue or it's just me

@PlasmaChannel 6 жыл бұрын

+nicktohzyu this is very disheartening if in fact we messed up the music level. It's honestly very tricky- every new video is a trial and error. Thanks for bringing this to our attention. Wish it could be changed after being posted.

@Octojen 6 жыл бұрын

Great video, music was louder then ideal at 2:20 ish, (before that it was quieter/better) but could hear you just fine. Where you where asking us to listen to the radio - at that point the music was kinda drowning it out a little bit - I think I'd have muted it for that section. It didn't spoil it for me, just room for improvement. Made me wonder, if you has a musical coil, would the radio pick that up?

@PlasmaChannel 6 жыл бұрын

The saddest part of this is that I thought it was too quiet at 2:20, when editing. So I boosted it 3 dB, and called it good. Should have just kept it!

@humanplaysgamesiguess7736 6 жыл бұрын

What happend :,( with your arm

@PlasmaChannel 6 жыл бұрын

Ah, well, I broken my elbow last November.

@narayanancn8831 Жыл бұрын

😅

@keyserswift5077 2 жыл бұрын

Turn it on and put the tesla coil in the microwave!

@warrenstephens8557 5 жыл бұрын

Dude, you look like Tom Hardy

@Coyote0874 5 жыл бұрын

More like young Woody Harrelson

@hyqhyp 6 жыл бұрын

Dude ... signal strength goes down inverse square, not exponentially.

@PlasmaChannel 6 жыл бұрын

You are right. Can’t believe I slipped that one up. I’ll put correction in description, thanks

@chuckjohnson4750 6 жыл бұрын

It's true that the signal strength goes down in proportion to the inverse square. But at the same time, signal strength goes down exponentially. - - - Both of these descriptions are true. An expression for the signal strength at distance D is D raised to the power of -2 (negative 2). So when the exponent is minus two, then it is correct to say "the signal strength goes down exponentially". - - - There is more math in heaven and Earth than is dreamt of in your philosophy.