Your attitude of helping those who want it by sharing your knowledge is the highest form of honorable. I made a good living and had a great life due to someone like you doing just exactly what you are doing. I made it a point to pass on what I had learned in the same manner.

You setting good example on the youngins coming up 👍🏼

Man you should do more of these videos coaching people. I’ve been welding 10 years and still enjoyed it

Wish I had a friend like you 💯 that man is going to thank you forever

I appreciate these videos you put out. I'm in school right now, watching this on my break because I was having the same problem as your boy. Keep the vids coming, PLEASE!!!

Some good life lessons here. Helping others attain success is true nobility. The welding subculture has that, where others in society don't. Bravo!!!

Hey man appreciate the tips! Got into welding about 2 months ago and is striving to make it a career!

6010/6011 was hard to weld with but once you get a little bit of weld time you’ll get to know what you need to work with.. keep up the good work teaching.. that’s the best way is to practice and learn different techniques

I’m 17 but I think the hardest part for welding pip is just moving your body in the right position and the angle

Awesome video your a great teacher with a real genuine positive attitude, that equals success in any field

a good teacher and guidance wont hurt nobody!! good job fellas...

You're a good teacher, keep up the good work and don't stop helping others.

I’ve needed this video for years

Im 60, ive been welding since i was 16. Each individual has a slightly different technique, ive seen lots of pipe welders doing stuff which shouldnt work. Learn the basics and you will find your own style that is right for you.

You gave some great pointers .. Thanks ... I saw what I was really doing wrong ..

I'm catching up on your older videos, and getting a great education on welding!

True bro helping your friends succeed

you are a good person for helping your friend

Good job on explaining the rod angle. I got some 6010 from a welder trailer that i bought. I couldn't get get the rod going. When i saw your video you explained it perfect. Thank you and good luck.

Very well said more power to all welder around the globe. am Filipino welder

I got an apprenticeship as a pipe fitter at an hvac company I’m currently in our fab shop and for the last month I’ve been setting up one of the welders grabbing some scrap pipe and just practicing downhill 6010 for roofs then Filling them in with 7018 uphill. I’ve been doing my practice trying to see what I can notice in my own stuff as I practice and I’ve noticed stuff like undercut or key holing then I’ll ask the journeyman about it and he’ll give me a demonstration or watch me do a bead then gives me a few tips and has me try again and in one month I made more progress than I did four years ago when I was taking a few classes in high school and early community college

Thanks I’ve been struggling with the root and this helped 🙏

Thanks brother you are always helpful my brother and I appreciate your videos

I just going to say thank you u give a real answers of why my keyhole it's to big when I weld

Hell yea thanks man Im about to get .y welding certificate and my last class is pipe welding thanks for.the help

Good tips thanks I'll stay tuned for next video

I really dig your style bro, you Texas boys are some crazy good pipe welders. I’m up in Seattle in my last class at school right now doing TIG pipe, and gonna mess with some 6010 root/7018 cap and then TIG root/ Flux Core cap. Your videos me brush up on my 6010 game since it’s been a while. Best wishes and health to you, keep up the great content!

Very helpful, nice and clear. Thank you!

Good show! thanks for sharing!

If you ever do this again lmk I need some practice! I graduated just lookin for more practice I currently don’t have a machine. Good shit btw 👍🏽

Great video brother way to help the younger guys!

ORDER MY FRC SHIRTS HERE!👇🏼 www.theweldlab.com/product-page/bluecollars-frc-welding-shirts

Great video helped a lot Im testing on it now! And that neighborhood looks just the one I lived in. In northeast side of Houston! Love H-town

very useful tips! thank u master!

Also when you weld bend your rod's. If you have your rod straight in the stinger your out of position for your body. Clamp it into your stinger and bent the rod end 45 degree this will get you your stinger to be closer to the pipe allowing you for more support and there for a better weld.

Welding is so satisfying

Much love homito, spread the love

Good job on explaining the rod angle.Thanks

Thank you so much,,you a great instructor,im learning how to weld as a hobby.great impormation my dear friend watching here ph..

✌️ great instructions!! 👍👍 thank you,Homie!! 🙏🏿☝️✌️

Good information brother. Like see people mentor an educate new blood into the skilled world.

You the man bro!!

Your a good friend man!

Good points, learnt from them, thanks for sharing 👍😃

Excellent video. Thank you.

I was taught to go uphill in my welding program by my instructor whiners cwi ,couldn't weld down hill if I tried,after not welding for a while I couldn't weld up hill and down hill has been my go to for welding. Good info reminds of my 2nd school for welding for pipe. 6G certified but never did get into pipe welding. Spend a good dime to learn but I guess if I tried,I might be able to get a 6G done lol...

Brief but very well explained.

Well done sir. Thank you for the video. Very helpful.

Yes taught me alot

Good looking out compa

YOU'RE A GOOD DUDE

I appreciate ur lectures

Beautiful!

My guy rico proud of you bro keep it up

Appreciate your videos good tips u leave on here am electrician but doing lil welding at home

thanks for the tips man !!!

This helped a lot 💪💪

Great tips buddy 👍!

I love 5P+ or Hobart Pipemaster, the Hobart is on point

Love youre videos , im starting to get into welding finna choose what school i wanna go to, but can i have a good career if i wanna do tig & stick , or what do you recommend?

If you ever come out to Cali I need some help figuring out pipe and overhead, I have an sa250, plenty of rod, material, and hunger to learn

Good stuff Brother ! 🔥

thanks a lot for this video

So with a 3/32 landing and 1/8inch 6010 rods, what's your amps and dig, or is that different with the big machines versus a small one I use in my welding school shop?

Thank you!!

Badass man! Im staying subscribed!

this is a good tip video. thank you

Knowledge is power brother thanks for sharing

You a real one 💯💪🏽

Dammit I've done this to my helpers a few helpers at work during lunch time . They are welding already they still call me to thank me . And the feeling is awesome knowing that I did something right.👊👊👊👊👊 👍🙏🙏🙏🙏

I just subscribed today and I love this channel already good luck bro with your channel👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻☝️

When I saw all those coupons laying there, I knew he was serious.

What amps do you use on them 6010?

That’s A good homie let’s go!!

You da man weld lab

Mistake #1.....70k truck when you are just breaking out lol. Worked with an old timer a few years ago still rocking an 80's squarebody Chevy. Probably paid for itself 100 times over by now! Much love and keep up the great channel!

Nice u do a great job teaching bro I wish you were in Bakersfield California

Thays real dope for you to help ya boy out

Big respect

Good stuff bro!

If you could speak about the machine setup, amperage an such it would be great.

That's a different technique as here in Australia on 6-8 inch pipe we use 4 tacks(prevent gap change from one side to the other), weld over head to vertically up, with a key hole and a flick motion. This is so foreign as how do you know if the root run is going well if you can't see it when welding.

Thanks bro 👍

very good class bro

So I was always taught to start at 6 o’clock work the rod up. But the I just tried they way your boi doing and came out the same. Still glad my mentor taught rig style welding does even I don’t do pipe often but it comes in handy when ever I have to weld a gas line of water line . Saludos from the Bay Area 510. Ps I always use red Lincoln 6010 my personal choice but shit I can’t find it hard to fine the red 6010.

Where can I get a few pieces of sch 40 pipe like those? Been trying to practice at home too

I would like to learn how to run that 6010 root but dragging it instead of stitching ,just how your friend did at the end of the video ,I can get it started but my arc dies after an inch or so.i had the same problem with my root around 6-9 o’clock my root starts to get heavy ,your video help me find out my problems another thing I noticed in your video was your friend was welding down hill ,the school I go to teaches us to weld up hill because down hill causes porosity ? but I also heard pipelines is all downhill !! ????

Great video

Question. Where do u folks get a big pipe thick like this to practice welding?

❤❤❤❤❤❤ thank you!

Good Job..

u should do a video of preparation before welding it, preheating and whats the right temperature to weld it etc. btw just started following and really like your videos keep it up 👍👍👍

Yo Rico I’m doin 5G downhill in class and these tips helps alot but I have to hand bevel my pipe

Welding pipe 1G good job I like it your progress 😉

Great advice......Thanks from El Chuco...

Can you explain the difference between the rods and what to use for what job/ material thanks. From Mexico

Very nice 👍

How long should a root pass amd multiple passes take for a experienced welder, with enough cool inbetween if that's a thimg?

Damn man you were too good♥️♥️♥️🇵🇭🇵🇭

i am a SMAW nc2 taker. this saturday is our assesment in steel pipe 6g. but we dont use 6010 but 6011 for the root pass and 2nd pass while the capping is 7018. im nervous. any advice for me?