Downhill Welding on Roll Out (6010/8010)

Рет қаралды 47,096

Күн бұрын

One thing that I wasn’t aware of going into the pipeline fabrication side was the need and use of your roll out wheel. Without it, you’re pretty much going to get ran off. They expect inches, and inches you will get. Today we tackle that objective! Pipeline Downhill Welding on the roll out. You need to build a symbiotic relationship with it!! Hopefully the tips on this video helps you guys out. As we are tapping into our federal oil reserves, I have a strong believe that the next oil boom is going to be crazy. Specially due to the fact that many companies are implementing carbon capturing technology into their systems. If you guys have any question, feel free to reach out to be on my email or @ my Instagram. The links are on my page. Thanks for watching.

Пікірлер: 93

@juansalazar6641 2 жыл бұрын

La MB jorjiyo Vasquez

@VantageWelding 2 жыл бұрын

Ese eres tú mi chingon.

@1pipepro 5 ай бұрын

Very good detailed video, clear and simple instructions 👌

@VantageWelding 5 ай бұрын

Thank you

@WizKhulafu Жыл бұрын

More welding tutorial brother you're the best welder I saw here in KZfaq so far and also a good teacher

@VantageWelding Жыл бұрын

Hey thanks brother. I appreciate the support.

@PaulJones-bo8gt Жыл бұрын

Your a perfect teacher these video's are gold thanks for sharing this.

@VantageWelding Жыл бұрын

Thanks buddy.

@BMGProjects Жыл бұрын

Yes! A very good teacher.

@allanramgoolam8007 Жыл бұрын

Thanks for the knowledge bro, you explain the different procedure real simple , blessed.

@VantageWelding Жыл бұрын

Thank you for watching brother.

@JonDingle 2 жыл бұрын

Great video young man and great welding too!

@VantageWelding 2 жыл бұрын

Thank you sir.

@HOOKEM2024 Жыл бұрын

Hell yeah looking good ! Damn good teaching

@VantageWelding Жыл бұрын

Thank you for watching sir

@DazFab_Metalworks Жыл бұрын

Great channel son,im no pipe welder but learned a lot about stick from your videos

@VantageWelding Жыл бұрын

Thanks for watching budd

@stillirise505 2 жыл бұрын

Nice brotha! Thanks for sharing 🤙🤙🤙

@VantageWelding 2 жыл бұрын

Thanks for watching budd

@ouroboros5378 2 жыл бұрын

Buen videos, gracias !

@alexanderstefanxandraswedi5835 2 жыл бұрын

You are so skillful .

@VantageWelding 2 жыл бұрын

Thank you brother.

@omarandpedro Жыл бұрын

i've seen a ton of welding videos and this was the best by far. great content and simple to folloow

@VantageWelding Жыл бұрын

I appreciate that brother.

@44_83 Жыл бұрын

@@VantageWelding Now next time do the root uphill and make it look like the one you did it going down, IF YOU CAN. I bet most pipelining nggas can't.

@VantageWelding Жыл бұрын

Downhill, uphill, side to side. No gap too small no crack too wide. Can weld anything from the crack of dawn to a broken heart!!

@44_83 Жыл бұрын

@@VantageWelding lol even parrots can talk.

@VantageWelding Жыл бұрын

It’s not that hard. Don’t let it get your blood boiling brother. Welding is not that hard. I appreciate you watching and cumming back here for more. 💦

@lamerariataaaaa 2 жыл бұрын

My boy pulled out the pesos !! 😂🔥

@VantageWelding 2 жыл бұрын

5 peso landing. 😅😅🙌🙌

@cyberisticgal7991 2 ай бұрын

Darn, here in the US I've used a nickel, for the same thing for over 35 years, I guess I'll have to get me a 5 peso. 😂. I been doin it wrong, inspector musta not noticed.

@VantageWelding 2 ай бұрын

@cyberisticgal7991 it’s never too late to do it right 🤪

@dmbgino1807 Жыл бұрын

that “stay within the bevel” comment is golden wey, idk how many times i planned to do a 3 bead cap and end up doin 4 because i blew my bevel out onna fill for movin too wide.

@VantageWelding Жыл бұрын

It happens to all of us brother. Trying to keep the welds clean you over think. When in reality is as simply as staying within. Thanks for watching bro. This shit has happened to all of the welders I guarantee.

@cindyletterman8998 Жыл бұрын

wow, great weld

@VantageWelding Жыл бұрын

Thank you

@downhilldaddy9346 2 жыл бұрын

Roll em and slick em out! 👌🏾

@VantageWelding 2 жыл бұрын

🫡

@gonzalolopez7199 2 жыл бұрын

muy buen video y expicas muy bien el proseso de soldar saludos

@VantageWelding 2 жыл бұрын

Saludos Chalo. Gracias por su apoyo hermano.

@texasmadeweldingacademy8901 2 жыл бұрын

Great Advice Brother! 🤘🏽

@VantageWelding 2 жыл бұрын

Gracia carnal.

@truckerray7533 Жыл бұрын

This is an awesome video as well as awesome looking beads. I'm new to welding & have been out in my shop practicing & running beads & joining pieces together. I've been learning the basics from my brother, who has been welding for 30 yrs. I do have a couple questions for ya & I apologize for asking. . . . . .1.) "What is the reason for leaving the small gap between your 2 pipe pieces before ya begin running your joining root pass? 2.) Why not let the 2 pieces touch directly to each other & then start your joining root pass? Thankya for sharing. I hope I can be as good as ya'll😃👍🏼

@VantageWelding Жыл бұрын

You don’t have to apologize brother. No question is stupid in this world. But the gap in between the two joints is too adhiere inside penetration. Without a gap it’s possible to get a root in but you will have a harder time.

@truckerray7533 Жыл бұрын

@@VantageWelding Okie dokie. . . . I really appreciate ya taking the time to text me back to answer my questions.. Thankya sir. I'm trying to learn all i can👨‍🏭 & get in the much needed practice👨‍🏭. I've been trying my best with the "uphill", using 1/8 7018, but i suck & i dont like the 7018 rod. I'm running at 115amps. I'm using an ole 50 yr old Lincoln 225amp arc welder that's in great shape. My grandpa bought it in the mid 70s & dad used it thru the yrs until 2016. I'm having alot of fun, needless to say😃👍🏼. Im a new subscriber to your channel, if that's okay with ya👍🏼!

@SkillzGoOn 2 жыл бұрын

Think you can do a 6010 5p all the way out , haven’t seen a video yet of people doing 6010 caps. Been looking around to see what motion guys use to get it nice and stacked.

@VantageWelding 2 жыл бұрын

Same thing bro. No lie. 6010 doesn’t like to stack as good as 7010 or 8010. So for your last fill I’d leave it a bit bumpy so you can just skate a cap on there.

@CesarHuerta-ih7oj Жыл бұрын

🔥🔥🔥going back on all the clips anytime i get a chance and reaction is still like MAINE🔥🔥🔥

@VantageWelding Жыл бұрын

Thanks brother. I appreciate the love homie.

@simonsiron887 Жыл бұрын

You're a very good teacher. I want to thank you for your video. Also is your pipeliner hood cut down at all?

@VantageWelding Жыл бұрын

Thank you. And no brother. It’s still not cut brother.

@simonsiron887 Жыл бұрын

@@VantageWelding ok thanks man

@WELDERITOYTV 2 жыл бұрын

Wow welding appearance

@_kline9571 Жыл бұрын

Slick.. if you had the choice. Would you rather cap wit 6010 7010 or 8010. I'm normally a TIG 7018 kind of welder but lately I've been doing a lot of downhill 6010 at work I was wanting to buy some 70 or 80 but not sure what would run better

@VantageWelding Жыл бұрын

I don’t really like to use 6010 other than for the roots due to the fact that they won’t carry metal as good as a 8010. 8010s freeze up faster than a 6010. And as far as 7010, you can slick those out too as well, just get ready to get burned the **** up lol. I prefer a hood ol’ 8010 pipeliner over any rod. 8010 downhill over any process. 🦾🦾 thanks for watching

@elimaddox8512 Жыл бұрын

Down hill I’d run 8010 for fill and cap

@WELDERMADEHEADBANDS Жыл бұрын

🔥💯

@VantageWelding Жыл бұрын

🤝

@micdiva 2 жыл бұрын

I always leave wagon tracks unless I'm using 7018 on the next pass 6010 7010 will dig all trash out

@darthmaul6693 2 жыл бұрын

Can you do a video on how to tie into the tacks, I’m having trouble tieing in on my 6g. Not sure if I’m grinding to much??

@VantageWelding 2 жыл бұрын

It’s at minute 6:46 were I tie in.

@VantageWelding 2 жыл бұрын

If you’re blowing through you either A. Grinding too much B. Excess Amperage

@adsaccuracy 8 ай бұрын

Quality

@VantageWelding 8 ай бұрын

🫡

@downhilldaddy5282 Жыл бұрын

💪🏾💪🏾

@fittergrips2010 2 ай бұрын

Land always uniform and same thickness both sides. Then you only have to look at the top of the land to know exactly what is inside . When doing Tie ins it makes life easy and your heat sink is uniform too

@VantageWelding 2 ай бұрын

Yes sir

@keatongarcia3899 Жыл бұрын

Can you do a video with tips on how to do restarts on your cap with 8010. ?

@VantageWelding Жыл бұрын

I can give you a tip. When you pull out, pull out by pushing down and away from puddle. That would leave a voided space shaped like a spoon. You go back into that cracker, refill and take off.

@VantageWelding Жыл бұрын

Wally the weld professor has some awesome content regarding restarts on 8010. One of the slickest welders out there brother.

@pcharly4661 7 ай бұрын

Good welder

@VantageWelding 7 ай бұрын

😂

@user-uj1iq7sk4i Жыл бұрын

Классная работа!!!!

@VantageWelding Жыл бұрын

Thank you brother.

@user-uj1iq7sk4i Жыл бұрын

@@VantageWelding да хотел бы так научится варить катушку сдавал не прошла увы!!

@brandontoussaint1867 Жыл бұрын

Where do you get that T from for the weld gap?

@VantageWelding Жыл бұрын

Heavy duty shipping strap brother.

@johnjacobs4207 Жыл бұрын

was that all done with DC? 6010 8010

@VantageWelding Жыл бұрын

Yes

@user-jw1lx3xu6s 2 жыл бұрын

сойдет 🤟👋

@pcharly4661 7 ай бұрын

No pues q chido rolando la pipa así quien no

@VantageWelding 7 ай бұрын

Como caiga.

@harbertmoore2663 Жыл бұрын

You had a 💩 load of porosity in those weld beads!

@VantageWelding Жыл бұрын

Nope. I don’t think so. Good observation though.

@learnwelding 2 жыл бұрын

I'm tyrophobia 😁

@VantageWelding 2 жыл бұрын

Hi Tyrophobia, I’m Jorge. 😂

@learnwelding 2 жыл бұрын

@@VantageWelding 😂😂😂

@joaquincousins8667 Жыл бұрын

Cap too Convex...!!!

@VantageWelding Жыл бұрын

🥺🥺😢😢

@joaquincousins8667 Жыл бұрын

Not that Good

@VantageWelding Жыл бұрын

😢❤️‍🩹💔