3 inventive lighting projects using LED strips

Рет қаралды 4,070,290

6 жыл бұрын

In this video I will be showing you how to build three unique lighting projects at home using LED strips.
Parts links:
Disclosure: These are affiliate links. If you click them and make a purchase from the various merchants they link to, DIY Perks may earn a commission. Affiliate programs and affiliations include, but are not limited to the eBay Partner Network and Amazon Associates.
Here are the quality strips that I used: www.aliexpress.com/item/32855...
I specifically used the 'daylight white 5600k' strips, but the other colour temperatures are great too. Here's an ebay listing of the 5600k variety: ebay.to/2iSqEKu
And an ebay listing of selectable colour temperatures: ebay.to/2zCThDr
Dimmer circuit:
AliExpress: www.aliexpress.com/item/32858...
eBay: ebay.us/qmRdmk
RGB Crystal Tower Light video: • Stunning LED lighting ...
OFFICIAL LINKS:
Support me on Patreon: / diyperks
Official Website: www.diyperks.com/
Discord: diyperks.com/discord-server/
Forums: diyperks.com/community/
Twitter: / diyperks

Пікірлер: 2 000

@HangmanOfficialUploads 3 жыл бұрын

DIY Perks in a nutshell: "So what we'll need is a thin sheet of aluminum"

@bryannichols7025 3 жыл бұрын

I was surprised it took him 34 seconds to say aluminium. He's gotta step that up.

@HangmanOfficialUploads 3 жыл бұрын

@@bryannichols7025 Yeah, give us that goooood tease... Wait until like... 5 minutes in so we get that long wait before the gratification of a British man saying "aluminium".

@ILLUMINATORProKit 3 жыл бұрын

What about those drawrrrings? Can some one explain the extra "r" pronounced in "drawing" in UK English?

@JFat5158 3 жыл бұрын

@@ILLUMINATORProKit its like any language... just how its said. For some reason US english omits the second i in aluminium, fair enough. But the way you guys say 'carmel' instead of how it is spelled 'caramel' is just as weird. extra r in drawing, omitting an a in caramel, thats what makes all the fun of accents :P

@LexXxusTVLive 3 жыл бұрын

@@JFat5158 I respect that. Having said that though... Living in Southern Ontario all my life, I can promise you that we don't say 'caramel' that way. We do have carmel candies that are made from caramel. We say it the way it is spelt. With every single letter and not adding an extra tone into it. These are called regional accents. These are preferred social adjustments in the pronunciation. We also say aluminum the way it is properly spelt. Google "aluminium" and you will see it auto changes it to the correct dictionary spelling. You will also see that is is labeled as "noun, adjective British" when you search the term "aluminium" on www.dictionary.com . Aluminium is the spelling of the regional accented word. Not the authentic spelling of the word. These are not my opinions, these are facts I have acquired from education. It's only fun if you don't teach English.

@gullit97 6 жыл бұрын

You can see him getting progressively more blinded by the increasing light in the room.

@zachhoy 4 жыл бұрын

at 11:30 "allowing you to gaze at it comfortably" as he looks like he's about to fall into the sun

@atharvgopaluni 4 жыл бұрын

“I’m blinded by the lights”

@Cat_in_Spacetime 4 жыл бұрын

11:27

@spicyboy8484 4 жыл бұрын

jhahahahahhaahahahhaah

@itz_bluebxrry8679 4 жыл бұрын

@StrayZGaming 4 жыл бұрын

This guy making art attack for grown ups

@gxgamingandtech2017 3 жыл бұрын

You reminded me of my childhood thx

@walkie1985 3 жыл бұрын

Haha 100%

@Iabyriinth 4 жыл бұрын

This dude makes fantastic DIYOYGYED: Do It Yourself Once You Get Your Engineers Degree.

@flyde6521 4 жыл бұрын

Not really, he really only cut things, and did the sort of wiring they teach in high school physics

@filesaver5387 4 жыл бұрын

Flyde its a shame they don’t teach taking a joke in high school

@flyde6521 4 жыл бұрын

@@filesaver5387 Yes because the above comment is a joke. What ever they taught at your high school about the mystical "comedy" must have been incorrect.

@tjay2586 4 жыл бұрын

Flyde so your saying the comment wasn’t a joke?

@jayh9529 4 жыл бұрын

Laby Riinth that's Colin furze

@Nerdforge 6 жыл бұрын

We both really enjoy your videos, and they have been a huge inspiration for us. Actually, almost two years ago, we decided to make your LED mushrooms, and that was what snowballed into our own channel. Your video and content quality leaves very little to be desired. If we ever create videos half as good as yours, I'll consider the KZfaq project a success. Thanks for all your videos, Matt! /Hansi

@DIYPerks 6 жыл бұрын

Wow, that's quite something! :) Thanks for the compliments.

@ZiRR0 3 жыл бұрын

WOAH both youtubers i like wowowowo

@lukeiman3591 3 жыл бұрын

@@ZiRR0 you late Me sooooo late

@ZiRR0 3 жыл бұрын

@@lukeiman3591 lmao

@AcrimoniousMirth 6 жыл бұрын

Sees perfectly good screw terminals, solders to the back of the board anyway.

@recklessjunkie Жыл бұрын

His smile is always so infectious and overwhelming like a boy on Christmas morning

@billysprague3570 3 жыл бұрын

For the LED ring to cement, try adding medium size cotton balls to act as clouds, the light shines nicely through them.

@Abyeon 6 жыл бұрын

He's the bear grylls of lighting

@Joe-dt7wp 6 жыл бұрын

*Grylls

@VEC7ORlt 6 жыл бұрын

Drinking his own, nevermind...

@_BangDroid_ 6 жыл бұрын

making his own flux

@M3iscool 6 жыл бұрын

Wow, it must be a really smart bear to grill it's own food. Edit: Dang it, he corrected it to proper spelling. :(

@stefflus08 6 жыл бұрын

yeah.. but being compared to Grylls is hardly a good thing. So, spot on.

@TadpoleSS15 4 жыл бұрын

“very soft and good to gaze at” *literally heaven*

@jdh3782 5 жыл бұрын

I love the way you brought this together! I have spent many years supplying and advising customers on LED lighting application. These DIY options are fantastic and I will be using this to illuminate my garage. I'd love to share when I complete it. Thanks for the great ideas!

@yagoa 6 жыл бұрын

To connect positive and negative at opposite ends(as in the last project) is very good practice since it prevents voltage drop along the strip. Especially if you are creating a circle of led strip(no edge with a strong and weak side). Also very nice to hear someone who knows what they are talking about when it comes to LEDs

@antwonsmith70 6 жыл бұрын

Dude, your projects are amazing. Very glad you decided to share you talent with us all!

@austin5977 6 жыл бұрын

Just a suggestion for future videos, you might want to let people know that you can use wood tools on aluminum because of the metals softness, just so people don't spend needlessly. Thanks for making incredible free content!

@annies.2795 3 жыл бұрын

3:53 "As you can see, it looks INCREDIBLY awesome! But.. What is it exactly?" 😂😂😂 I love how we got to this point and didn't even need to question it, tbh it did look so awesome that I'd want to make it even without knowing what it's for!

@jamespaige9081 6 жыл бұрын

I really like this tutorial format where we don't actually know what you're making until you're done making it. It's almost refreshing.

@2DRINKSMINIMUM 2 жыл бұрын

you have a lot of time to waste, don't you?

@robinturnbull1731 4 жыл бұрын

I love your use of words like “gloop”, ‘plop”, “snazzy”

@DarylVanHumbeck 6 жыл бұрын

One suggestion for the first project is to use some glow-in-the-dark garden stones (I managed to find some in a local dollar store) for some of the stones to give you something to find each end in the dark.

@toddy2519 6 жыл бұрын

Or you could simply paint the stones with glow-in-the-dark paint. I get mine from GLOW Inc in different colors...even use one special paint they have for the sights on handguns!

@crawfish069 5 жыл бұрын

I put glow in the dark paint on my flashlights to help me find them in the dark. It works great as I use the better 2nd gen gid paint.

@FlorianLinscheid 6 жыл бұрын

These will be definitely done at some point in my house. Amazing ideas. And thanks for pointing out the importance of good quality LEDs! That is the most important aspect of using LEDs as actual room light instead of pure decoration.

@olgasmith9429 2 жыл бұрын

Please, never stop making videos!

@juliacatoe969 5 жыл бұрын

I clicked on this video expecting level 1 difficulty DIY projects. Then he busted out the soldering gun and man was I surprised. Still watched the whole thing though

@docolemnsx 5 жыл бұрын

These aren't exactly level 1 but they're level 2...

@GetFitReedman 5 жыл бұрын

@@8a8 helps to also have a solder gun :)

@GetFitReedman 5 жыл бұрын

@@8a8 I couldn't say ;)

@thewatcher611 4 жыл бұрын

but, don't do it like him. you should heat the parts to be soldered. He's not getting the part hot enough, and that makes for a cold solder joint. Which is bad. or, will be bad as current passing thru it heats it up and breaks it. use rosin core, it heats easier, and sticks well.

@jemmaj2919 4 жыл бұрын

Not all viewers r level one, level 2 ppl deserve some love too

@nadezhdasaleh3435 4 жыл бұрын

Thank you for sharing Matt. Although I don’t craft with aluminum there were some good conceptual tips I picked up in this video that I’m planning to try in my own tinkering projects. Hoping to see more of your inspirational ideas.

@nikhiljain3612 5 жыл бұрын

You have such a calm manner to you. Watching your videos somehow puts me at peace.

@CrestofPotential 3 жыл бұрын

The seller for the lights he's using now has captures from videos on the channel as pictures on the product listing. Respect

@Ar7ific1al 6 жыл бұрын

The one with the crumply aluminium foil actually does look a lot like a frosted glass window. It's really quite nice looking. Very cool!

@willrogers3702 6 жыл бұрын

The last one would be great mounted to a ceiling. I'm glad you are making more videos again!

@GLACIOUS13 4 жыл бұрын

Same thought. Sized to match my ceiling tiles. This is the solution I've needed for a house that I've just purchased (yep, January 2020 I bought a house) florescent tubes/ballast, I'm not a qualified electrician but, I can build a computer. This is going to be great!

@GLACIOUS13 4 жыл бұрын

@maryjaneevadiamond6359 5 жыл бұрын

I think these lighting ideas are simply amazing, the trifecta of DIY LED lighting.

@pinnocksmarthomeinstallati2543 3 жыл бұрын

DO you know that you are a lighting designer, and I know that air BNBs and home designer would love your ideas. I like the second and third lights.

@DigitalBhangari 4 жыл бұрын

1:20 The screw terminals: am I joke to you?

@Sophia-bm9ch 3 жыл бұрын

My dad made a standup lamp recently after he got the idea from the 2nd light you made here. He rolled the led strip, spiraling downwards around a aluminum tube, wrapped those sheets into tubes, using a few bicycle spokes at the top to hold them up and infront of the LED's. It looks pretty damn awesome

@JonathanLaRiviere 3 жыл бұрын

I never realized how little I knew until seeing how much DIY Perks could do. SO COOL.

@LoveGagaAndYou 6 жыл бұрын

please don't ever stop making videos and giving ideas like these ! amazing work !

@1zippy 6 жыл бұрын

so glad i found this channel! i honestly dont know if ill ever do any of ur projects but your music and voice are entertaining on their own, i just worked on some art with this playing without even watching. and ofc youre so informative i feel like i could totally do this if i ever get the urge

@purplemonkydishwasher 4 жыл бұрын

Hah, I used a thick window-blind slat instead of aluminum for the Arc light, and it worked great! Cheers!

@el_teodoro 4 жыл бұрын

Just got my desk and I've been rewatching all your vids. Please make more!!!

@jedics1 4 жыл бұрын

You sir are a legend, your sanding of the plastic sheets gave me a great idea to solve a problem where I can't find some frosted polycarbonate panels for a project...Im just going to buy clear ones now and sand them until they are frosted..Thanks, Ive got a few ideas from your channel now :)

@amorphuc 4 жыл бұрын

Hey Matt. Thanks for sharing the ideas. Very cool.

@kaiyode3599 5 жыл бұрын

"I'm going to watch this video and make this stuff!" *second step requires soldering* lmao nevermind

@takix2007 5 жыл бұрын

Actually, it doesn't. Did you notice how there were screw connections on his dimmer circuit? That's how you can connect everything without soldering... I would recommend adding a tiny drop of super glue to prevent the screw from unscrewing itself when everything is wired correctly.

@Levy_Wilson 4 жыл бұрын

It's a good excuse to learn how to solder. A Weller soldering iron can be bought for as little as $30.

@meme5887 4 жыл бұрын

Soldering really isn't hard. You can pick one up for $10-15 on Amazon and solder for a couple bucks. Plug it in, wait for it to get warm, put tip to what you want soldered and apply solder. It's like a glue gun except you hold the glue lol.

@rozberry8867 4 жыл бұрын

Soldering isn't rocket science.

@BecauseGames 4 жыл бұрын

I'll never understand why people are scared of soldering

@rodrickngonyoku5042 3 жыл бұрын

The lamps in the second project look fantastic

@gplustree 4 жыл бұрын

Some great tips here.. I'm getting set to build smart lamps with RGB+CCT strips and the info on making aluminum strips and diffusers is super helpful

@Viscontiorama 6 жыл бұрын

I'm almost done building the first project ! Great idea , the shadowless lighting is huge for me and the high CRI I love, wish it were brighter even though I doubled the run of leds on the arc, I also used cylindrical molds for space efficiency and used and Xt-60 connector for the power and I made a wood top instead of the rocks . Wish the leds were more tightly spaced it would be awesome considering the built in heat sink of the project

@vornamenachname3725 6 жыл бұрын

What about attaching another strip next to the first one but with the LEDs themselves staggered?

@elviswjr 6 жыл бұрын

Step 1: Buy some LED strips. Step 2: Buy some Aluminium. Step 3: Build a light fixture.

@steevstrickland568 5 жыл бұрын

Buy some Al-u-men-knee-umm

@l4p4k1 5 жыл бұрын

@@steevstrickland568 At least it isn't Al-loo-minnam :P

@sldlevey2200 5 жыл бұрын

Chiyo ... ,

@sldlevey2200 5 жыл бұрын

BlurryBlu hkkopppokok$mmmk Pollll

@Ibrahim-ut6pn 5 жыл бұрын

In 1807 the English chemist Sir Humphrey Davy underlined the existence of the element arguing that "alum" was the salt of an unknown metal which he said should be called ‘aluminium’. again ALUMINIUM yes americans you pronounce it very wrong,

@smpyo7952 6 жыл бұрын

Love the video! I've been experimenting with a bunch of different LED projects myself, and found that you can save some "elbow grease" by using clear Leak Seal spray instead of sanding the shade to get the frosted effect. Sanding took over a half hour, spraying Leak Seal took two minutes (1 minute to shake the van and 1 minute to spray the sheets 😁)

@TheBowersj 6 жыл бұрын

1 Strip uses about 1.2 Amps or about a third of the energy of your typical CFL at same brightness. Thank you for sharing your wonderful projects.

@loopiewho 5 жыл бұрын

I made you desk light and its so nice to have my work space fully lite now thx

@TDPEquinox 6 жыл бұрын

Make sure to test the dimmer system for the first one before putting it in cement!

@davidson2727what 6 жыл бұрын

The amazon reviews for the dimmer say it is awful.

@guyh3403 6 жыл бұрын

And sticking a potentiometer in a wet environment is quite bad.

@Kevin.Callens 6 жыл бұрын

The duct tape and concrete is very bad at transferring the heat from the dimmer. It will fry sooner or later

@BulletMagnetMan 5 жыл бұрын

I'd have just used a couple of metal brackets to be honest and housed the components in a metal box. Cement seemed a little OTT in my opinion. Was it for mobility perhaps?

@crawfish069 5 жыл бұрын

@@BulletMagnetMan The cement base was used for weight to hold the whole thing in place.

@aarondelo5892 4 жыл бұрын

this guy makes me feel like i can do anything. literally had no clue why i was so into taking electronics apart, after subbing, i now know why. keep up the amazing work

@MitchM240 2 жыл бұрын

It cracks me up what this dude thinks is simple. He’s a wizard.

@DracoDwaggin 6 жыл бұрын

Perfect timing for this ideas, you solved some of my design problems I had, thank you very very much :)

@Real_MisterSir 6 жыл бұрын

Awesome project yet again, Matt, you are always an endless inspiration to us fellow creative people (and all those who just enjoy watching because of your quality content). I thought about how it would be to create the first project in this video, but use UV lighting instead and let it shine down on all white pebbles - sort of creating a night-time "bioluminescent pebble beach" effect. Not so much a working light, as a mood light of some sort. Well, long story short, as said you are an inspiration, keep up the great work! :) - Greetings from Denmark

@paulinemae3186 4 жыл бұрын

So fun, excited to try the first and third project! Definitely would be super useful as a student in a dark studio!

@christinebryant9143 3 жыл бұрын

You have created some amazing projects. Can’t wait for the next ones. Love the the RGB crystal tower.

@Cat_in_Spacetime 4 жыл бұрын

11:27 yeah I like that feeling Looks looks pretty good and nice guy.

@VasilisKaramanlis 6 жыл бұрын

You are one of the most creative person i have seen!

@larryrich327 4 жыл бұрын

You are so right, I had two sets of vary nice ones just hanging from my blinds I made a smaller arch and put plants under it awesome 👍

@TheToke 6 жыл бұрын

Your videos are great. Anyone making instructional videos should watch and learn.

@MiniCuis4u 5 жыл бұрын

AWESOME!👍5🌟 's I absolutely love his accent and the way he pronounces aluminum. 😄😍

@annakeye 5 жыл бұрын

*+Minnie Curry* Aluminium; pronounced A-loo-min-ee-um. Difference being and for reasons I cannot comprehend, there's a letter 'i' missing when the USA citizenry speak of this substance. He mispronounced "project". We of the British commonwealth say pro - ject. Yet he said it the US way as proj - ect. Oh and at risk of exceeding the reading tolerances of many, we say, "caramel" with three syllables but I often hear "car-mell" from the USA. Sounds really odd to me. Funny how language evolves and changes in a relatively short space of time.

@brantayor7296 5 жыл бұрын

its a diy video not a porno seriously

@Theexplorographer 6 жыл бұрын

The final light would be AMAZING as a ceiling fixture.. thanks Matt. Great vid!!

@jim-sp5rl 5 жыл бұрын

Great ideas with style! Thanks!! Regarding the wall lights, cut one acrylic sheet 1/2 inch narrower and make it the outer sheet of the shade. This creates a 1/4 inch light border on the top and bottom, also giving the shade a dimensional effect.

@jasonmedas603 5 жыл бұрын

Every photographer should see this ...especially if they're good with their hands 👐

@simokojamesphiri7924 5 жыл бұрын

I feel like this bloke is my spirit animal

@GuitarSamurai17 6 жыл бұрын

Your videos are always SO INSPIRING! Keep up the incredible content!

@BigCityPalooka 4 жыл бұрын

OMG. After two and a half MILLION views, I guess you don't need me to tell you how fabulous these ideas are...but... MAN, they're FABULOUS! Thanks so much for making this! Cheers. :)

@boredgamer8507 6 жыл бұрын

OMG!!! you make expensive lamps look like dusty candles in so pocket-friendly and eco-friendly budget!!!

@creatip123 3 жыл бұрын

As a beginner builder, I'd advise to hook everything to the power source, and make sure it lights up the way we wanted it to be, before making it static. Making it static = burying the dimmer in concrete, or hot gluing @10:17 If something goes wrong with the whole built, or you forget 1-2 steps (which I often did, again, as a beginner builder), it's a lot easier to fix if it's not static.

@massimookissed1023 6 жыл бұрын

Hey, sticking LED strips to the wall is more creative than what I've done with mine. Mine are *waiting* to be stuck to the wall.

@luxdraco2597 2 жыл бұрын

just got a cool idea watching your video - I have used the aluminium c channel before for lighting in van setups - as it hides the led strip in most situations when viewing the light. The idea is 2 x c channel, facing each other, and in the middle bettween them is aluminium angle - placed downward such that each c channel light reflects off of it and outward to the viewer. Thanks for all of your awesome diy videos.

@IsaacC20 6 жыл бұрын

Dude. The wall sconces are an AWESOME idea.

@brenae4234 5 жыл бұрын

I’m just here for his pronunciation of aluminum

@rossboyer8879 5 жыл бұрын

In English of course

@BulletMagnetMan 5 жыл бұрын

which is, of course, with two I's. You know, the correct way. ;-)

@brenae4234 5 жыл бұрын

Tarquin Farquhar typos are legal. I hope you vote today!

@BulletMagnetMan 5 жыл бұрын

@@brenae4234 Hehe. I know. I'm a certified Grammar Nazi. I'm not American so no I won't be voting. Good luick though. The planet is depending on you to kick that ginger muppet out of office asap.

@libbylandscape3560 5 жыл бұрын

Love his pronunciation, I wait for it. lol ❤️

@brennonoverton5363 4 жыл бұрын

The second light with the acetate cover would be a perfect set of lights lining the wall of a home theater

@cemigci6022 4 жыл бұрын

i love how enthusiastic(i hope its the corrects spell) you are about your projects

@petermirtitsch1235 6 жыл бұрын

Brilliant video. I have a spare roll of these lying around, and fancied doing something like this.

@markpizarro3777 6 жыл бұрын

Max Payne giving DIY advices. What a time to live.

@morsecodereviews1553 6 жыл бұрын

Yup this channel is awesome. In fact, this is one of the channels that inspire me to create my own DIY show.

@costynvd 5 жыл бұрын

Thanks, those are great ideas! Love the tip about the acetate sheets for diffuser. I'm always looking for good diffusers :)

@Eclipsed_Archon 6 жыл бұрын

I might do that second one and make all of the lights in the room based on it, with rgb LEDs of course... Looks really neat.

@charliewilson3234 6 жыл бұрын

Oh hell yeah! About time you put something out. Hello from Texas!

@vgamesx1 6 жыл бұрын

Not saying that you don't get what you pay for, but I've personally not had an issue with cheap LED strips, plus I don't think too many people care very much about the CRI rating of their lights, oh and if they do have issues then at least it only costs you another $5 or whatever to replace it rather than $30.

@mikeb1834 6 жыл бұрын

The only people who don't care about the CRI of their LED strips are people who have never experienced good CRI LED strips. And really, how poor are you that $30 for high quality LED strips is too much? How much do you spend on filling up your car with gas? How much do you spend on food, or going to the movies? Are you really that cheap that you wouldn't spend a little more for something you will use every single day and that has a significant effect on everything you do? If you are that broke, then you shouldn't be worrying about doing anything with LED's and instead should be watching KZfaq videos to learn skills that will let you get a real job where you aren't having to cheap out buying junk LED's that will burn out and will make the color of everything look off.

@cekpi7 6 жыл бұрын

Melange Bryce alot of students are using leds to cut down electricity bill or just to make your room look cool

@charlesmaheu7112 6 жыл бұрын

I think cheap led strips are just fine for decorating. It's not the same thing if you want to light up your room with it, but in most cases, I don't think it's worth spending that extra. I get your point about the fact that it's not that pricey when you consider it though.

@DoomRater 6 жыл бұрын

I dunno about the OP but I get under $10k/yr. $30 for LED lights is a awful lot on my budget.

@vgamesx1 6 жыл бұрын

Melange Bryce I've experienced a few different types of lights and I could careless about CRI as long as the light coming from it isn't some awful greenish or blueish color, besides that unless you absolutely wanted a custom lighting solution it'd be almost waste to spend so much on lights, because don't forget you'll definitely want to put those on some aluminum strips and you'll need a half decent 24W power supply too, so $30 on lights + around $10 for a metal strip + roughly $8 on a PSU and if I really did care that much about CRI then by comparison a decent 8W LED bulb would only cost like $3-5... For about the same price you could basically light an entire house. Yeah $30 doesn't sound like much but you see in perspective, it costs a quite of a lot by comparison of traditional lighting methods, because that's going to be over $30 every one or two rooms, depending on how you want to spread it out.

@neodidi 4 жыл бұрын

Ok.. Wow... Love these... The second option I see so so so useful for setting up a KZfaq background/space... Was thinking something else as plates... But the Aluminium is really good for the reason you stated.. I see myself doing that second option in the future... Sanding can be don with an electric sanding machine or so... Awesome

@jenniferbrewer5370 5 жыл бұрын

I particularly like the worklight, and you just picked up a new subscriber.

@harrison298 5 жыл бұрын

11:29 cracked me up, though I can't tell if it was meant to be funny or not :D

@edessini3124 6 жыл бұрын

For better and bigger alternative to acetate sheet is any broken LCD old TV, they usually have 3 to 4 frosted sheet inside up to the TV size.

@mascatrails661 5 жыл бұрын

Really like that large project... I need to light a large dark room soon, and this seems like a nice choice

@nachito5841 4 жыл бұрын

No it doesn't, just buy a regular lamp, it's worth it

@dusinnhht 4 жыл бұрын

I actually built the working light. It's great, thanks for the idea!

@TheToneBender 6 жыл бұрын

I'm gonna line my bedroom ceiling with that shit. Then shove a timer on it to go off at 7 am. Maybe that'll get my lazy ass out of bed

@Newport31311 6 жыл бұрын

You said go off at 7 am. I totally thought you meant you would leave them on all night and have them turn off at 7 am. Darn you English language

@rossfromsa 6 жыл бұрын

Would one of the diffusion layers from a broken laptop screen work for the second project?

@abhishekchatterjee88 3 жыл бұрын

Hello Matt, With instructions shown for your table lamp over an aluminium strip, I used the electrical wire casing and fixed it on the table edge in shape of an inverted U and pasted the strips inside it. Not as elegant as yours but does create very good lighting for my desk work. Thank you for inspiration. Abhishek Chatterjee

@Sunny-Gupta1 3 жыл бұрын

You are such a very smart and creative person, I am watching your every video from yesterday.

@JloBroOFFICIAL 6 жыл бұрын

Light 2 would make a great reading light to have above the head resting area of a bed.

@RedDragonGecko 6 жыл бұрын

Be nice if you listed some of the power supplies you used.

@patrickmichael2968 5 жыл бұрын

RedDragonGecko 12V. 1amp DC. sufficient for up to 15' strips 12V 2amps DC for long strips (over 15') The ultra bright white light setup he used is a 5amp power supply. Which would normally be overkill. Hence why it is so bright.

@kcvrules 6 жыл бұрын

Amazing projects... Definitely going to my to do list. Thank you so much

@KenYoungIII 4 жыл бұрын

This dude...I wish he were my best friend. Creative, intelligent, and a fine attention to detail. Dull rocks not good enough. Let's give them a wet look.

@TDPlayz 5 жыл бұрын

When I was 11 a few of my friends and I were chosen for an engineering challenge where you got to use this stuff and keep extra materials! :D we made a robotic arm. Our challenge was designing a superhero with a disability and we had to build something that would help them in battle :) super fun

@TheParallellinial 4 жыл бұрын

Cool! 3 things I neither need or want in my life!

@fook-n-bear 5 жыл бұрын

This video was fantastic. Iearned absolutely everything I need to know. You should get van award. Love your hair. Thank you so much. A visually impaired person apprecieciates your efforts greatly.😨 yay!!!