3. Sysprep and Capture a Windows 10 Image for WDS

No video

3. Sysprep and Capture a Windows 10 Image for WDS | Windows Server 2019

Рет қаралды 127,909

4 жыл бұрын

Video Series on Advance Networking with Windows Server 2019:
This video guide covers the steps on How to Sysprep and Capture a Windows 10 Image for Windows
Deployment Services (WDS).
1. Create capture Boot Image in Windows Deploy Services console.
2. Run Sysprep to prepare the reference image.
3. Use capture boot image to capture Windows 10 custom reference image.
Video on How to Install and Configure Windows Deployment Service on Server 2019.
• 1. Install and Config...

Пікірлер: 91

@genericusername5520 4 жыл бұрын

you are one of the wonderfull people who keep the computer world running, and technicians working blessings and prosperity upon you.

@MSFTWebCast 4 жыл бұрын

Thank You... Its been some rough days.. Something to cheer up..

@AdamMT1618 4 жыл бұрын

Looks good. Although we use SCCM, we use WDS for other system installs. The guy who maintained our images left, so I have to brush up on how to do it.

@jebroertjeniet4866 4 жыл бұрын

why do you use SCCM and WDS?? but it is good to know for youself how to do it..

@mohamedessadki687 3 жыл бұрын

Your are a GOAT of IT men !

@MSFTWebCast 3 жыл бұрын

Thank you man. This comment made my day.

@genecampos3885 Жыл бұрын

Hi, after doing sysprep /generalize /oobe /shutdown , i still do not see any drive from the volume to capture part. Any ideas?

@alikaya7346 Жыл бұрын

This video is awesome. Thanks Bro..

@seRJota21 2 жыл бұрын

Thank you so much for your vids! It helped me a lot!

@dt5173 3 жыл бұрын

Thanks a lot brother.. nice video. Keep it up

@GDBBites 2 жыл бұрын

@MSFT Webcast : My drive doesn't appear in the drop down menu. Do you need to put a driver in the server for it to see the hard drive of the machine?

@joelrivera606 2 жыл бұрын

I have troubles with Microsoft Store, so i can't use SYSPREP before delete all apps in the store. But i really need those apps; i'm using WDS in Windows Server 2019. Thanks!

@Justp33p 2 жыл бұрын

Your whole series is AMAZING. but what we do if we had to save the golden image to the client's hard drive partition

@MSFTWebCast 2 жыл бұрын

Start the video again at time stamp 5:49. Click on Browse --> Click on This PC --> Scroll downward and select the partition on which you want to save the image.

@Justp33p 2 жыл бұрын

@@MSFTWebCast i did all that but i had a problem saving to the server, so i saved the capture image to a partition on the client. i ended up continuing the windows installation and copying the file manually to the server. i was just unsure if continuing the installation was correct

@PandaJP77 2 жыл бұрын

Thank you for this great work

@kamranahmed3947 2 ай бұрын

Hello Madam. it was really fruitful video for system administrators. this captured image ".wim" has been created for "MBR" partition. if you have any idea about to create .wim file for " GPT " partition then kindly give some Tips to create .wim file for GPT partition. Regards Kamran Ahmed Islamabad Pakistan

@MSFTWebCast 2 ай бұрын

The .wim file will work for both MBR and GPT.

@justincase6877 6 ай бұрын

Anyone else not finding a volume after booting the VM up again after sysprep???? I need help. :(

@yusufcet 4 жыл бұрын

You sir helped me a lot and keep helping me ! I'm grateful

@On-Way Жыл бұрын

How can i remove SID with Sysprep to make Windows Image WITHOUT Creating NEW USER ?

@mdrashidhussain7168 2 жыл бұрын

Please create Complete WDS Playlist❣️👌👌👌👌👌

@elikelik3574 3 жыл бұрын

I'm a little bit confused. Why do we create windows capture.wim file on server? Let say i have a windows 10 and i run sysprep and create a copy of that windows. Then i add it to my WDS. Will not it work? By the way i did all steps from first and second vidoe unfortunatelly getting error. Even boot.wim which i created with MDT gives an error.

@rianellioravan 2 жыл бұрын

is it possoble to make iso With every thing i need: 1. i Want to apply my own wallpaper in iso, after install it should be applied 2. I want to change settings on "Settings " app like personalization and task bar and other settings, an theesesettings Should be saved after installation 3. That is All i need , i will happy if you ll help me ;)

@jomonjm3961 2 жыл бұрын

Hi team while creating windows 10 image for wds getting error and not able to configure... Any idea on same.?

@marvelworld5042 Жыл бұрын

thanku sir

@winak4186 Жыл бұрын

SIR I LOVE YOU

@KundanSingh-ic5vh 4 жыл бұрын

thanks sir "providing such good content"

@sa77if 2 жыл бұрын

thank you for the vidoe but there is somehting i dont understand here if we are captuing an image that means we want to save effort of personalizing the windows but when we do sysprep we will do everyhting from the start Just like installing new computer whtout using WDS what is the benefit of syspreping the machine ? thanks

@DAplayerGAMES 6 ай бұрын

Sysprep reset ONLY the Machine name, Ip idress, Domain And Remove ALL drivers. so u can use the image on several hardware vendors.

@sheelamsridhar3782 2 жыл бұрын

Please tel me what I do, am added wim file to the wds server manually,

@basavarajchougala3384 3 жыл бұрын

Great Video 👍👍🙏❤️

@MSFTWebCast 3 жыл бұрын

Thanks for visiting.

@mdrashidhussain7168 2 жыл бұрын

Image Capture Boot Image Fails with 0xc000000f how to fir....???

@MSFTWebCast 2 жыл бұрын

I think the issue is maybe with capture.wim file. Try to add fresh boot.wim image and again create capture image from the fresh boot.wim image. And try again to capture the golden image.

@RABEAWANAS 11 ай бұрын

Are all versions of Windows compatible with this, or are there versions of Windows that cannot be capture imaged?

@jesuse.3898 4 жыл бұрын

I have a problem, i did the image capture but in the part 7:26 it stays in 0% uploading image any suggestion?

@fernando.luccas 4 жыл бұрын

Hello ! this error file:\windows\system32\boot\winload.exe 0x000000f just before of Capture

@sheelamsridhar3782 2 жыл бұрын

My system still shows do capture image step only

@Mimi90054 4 жыл бұрын

I plan to build a basic image. Then adding Chrome and doing window, bios updated. Can I use this basic customize image to deploy to different hardware? For example, Dell on HP etc..etc?

@davidboland495 4 жыл бұрын

Yes to all except the bios. For one bios is specific to the motherboard model so it wouldn't work across different hardware and on top of that, this image capture cannot capture the state of your bios. Only your operating system.

@ethanbarnes8423 2 жыл бұрын

After you complete the capture, does the second boot image remain in the boot image folder? For example, from that point forward will any client that attempts a reimage see two boot options when booting to the wds server?

@MSFTWebCast 2 жыл бұрын

Yes those two boot images will be there but once you finished the capturing process, you can remove or disable the capture boot image to avoid the confusion.

@adamhaydn707 4 жыл бұрын

Will it work on Windows Server 2016?

@au10ticity 10 ай бұрын

with the captured image, is it going to install that version of windows with the apps we installed and also the account that was used? or do we still have to provide account details and later join it to the domain?

@MSFTWebCast 10 ай бұрын

Yes, it will install the same version of windows with the all apps. This is stand-alone image, so you have to manually join windows to the domain but you can use MDT with deployment to auto join windows to the Domain.

@mdrashidhussain7168 2 жыл бұрын

Not able to Run Sysprep Setup >>>>>>>>>>>> Sysprep was not able to validate your windows installation review log file

@_JC_Denton_ 3 жыл бұрын

6:46 at that point i'm trying to upload to the server from a VM on which i installed a windows (the VM had a vmxnet3 network card) but i got an error message saying the server can't be reached, tried with the dns name and the ip address, no luck. Any idea ?

@MSFTWebCast 3 жыл бұрын

Make sure you type the correct detail about the WDS server. Like your client should be able to resolve the ip from the given fqdn. You can also store the image locally and then copy the image later on your WDS server.

@jacokleynhans2258 4 жыл бұрын

How long does it take to capture the image. Followed all the steps looks like it is getting stuck on 3%

@radaplay 3 жыл бұрын

Hello , i have got error when trying to connect my wds when capturing the image !! specific error is specified logon session does not exist it may already have been terminated. any solution or help what to search ?

@MSFTWebCast 3 жыл бұрын

Try to login using domainname\username (e.g. mylab\administrator). Otherwise might be issue with any group policy settings related to authentication on domain controller.

@vvenkat112 2 жыл бұрын

Hi, how we can set custom hostname using wds. Like I have already asset management with predefined asset tag and running in mssql. Is anyway to get that asset tag while deploying wds image

@MSFTWebCast 2 жыл бұрын

Refer this link: www.ntweekly.com/2017/08/14/how-to-configure-wds-2016-client-naming-policy/

@RPSI-HELV 3 жыл бұрын

Hi thanks for this vide, How do you make the Drive E: to save Capture ?

@MSFTWebCast 3 жыл бұрын

Before starting the capture process, I have created second partition on local system (Windows 10)

@needsomekyle 2 жыл бұрын

After i sysprep and name the image, when it gets to capturing image it wont go past 1% complete.

@MSFTWebCast 2 жыл бұрын

Try to store the image on local computer.

@tiagoolv5115 3 жыл бұрын

Hi, I did the whole process, but my windows 10 disk does not appear to be selected. is blank. can you help me?

@MSFTWebCast 3 жыл бұрын

Are you saying that you are not able to see the option name "Volume to capture"?

@merajkousar2654 2 жыл бұрын

@@MSFTWebCastI am also facing the same issue

@ahmedsaad-lk2og 2 жыл бұрын

thanks

@stringstrang8043 Жыл бұрын

Hi, I know this video is a bit older but are there any risks when creating a new capture image on the C drive? Our WDS box only has a C drive and no other partitions.

@MSFTWebCast Жыл бұрын

Yes, you can.

@geoffreysuarez5081 4 жыл бұрын

Hi I have tons of error when launching generalize sysprep on W10 pro, didn't find smth really uselefull on the internet, do you have some advices? TY.

@MSFTWebCast 4 жыл бұрын

Can you provide more information about the error or codes?

@nonsense6791 4 жыл бұрын

well done. cheers

@Nicolai9933 3 жыл бұрын

keep up the good work!

@MSFTWebCast 3 жыл бұрын

Thanks you, will do!

@cmb7556 3 жыл бұрын

For some reason after i select the capture image @ 5:00 its not showing any drives to capture. Not sure what im doing wrong made sure bitlocker was uninstalled any assistance is greatly appreciated.

@MSFTWebCast 3 жыл бұрын

I think may be SATA hard disk drivers are causing this issue. If that is the problem than you need to add driver to the boot image and start the image capturing process using updated (with driver) boot image. One more thing hit Shift + F10 to open command prompt and use diskpart command to get the list of all volumes. If you can see the volumes from your hard disk then SATA driver is not causing the issue.

@cmb7556 3 жыл бұрын

@@MSFTWebCast Thanks so much for the response can you expound on how to add driver to the boot image? Im a network guy and was task to this project. thanks so much.

@MSFTWebCast 3 жыл бұрын

Refer this guide: www.d7xtech.com/tech-info/network-boot-guide/install-wds/add-drivers-to-boot-wim/

@cmb7556 3 жыл бұрын

@@MSFTWebCast Thanks so much will try this today. You are so awesome.

@frodobe_tbaggin3146 2 жыл бұрын

@@MSFTWebCast I am having the same issue. I used diskpart command to verify that PC can recognize the HDD and the PC I am trying to capture can recognize. Can you please give me advice on how I can proceed from here?