300zx z32 Late Injector Install | 120k Timing Belt service DIY Part 4 Final Assembly

300zx z32 Late Injector Install | 120k Timing Belt service DIY Part 4 Final Assembly | VG30DET

Рет қаралды 1,758

6 ай бұрын

Its done! Finally this series is complete! I wanted to make an in depth 120k service and I feel confident I got it done :) Hopefully this series helps you guys out on refreshing your VG30Det!
Follow me on Instagram! IG: Drift Magic

Пікірлер: 20

@jeremythompson6822 5 ай бұрын

Thank you for doing this! As an auto Z32 owner I appreciate you. Z1 and Concept Z both sell a PTU relocation kit.

@DriftMagic 5 ай бұрын

I saw that! But i might just fab up my own. Also stay tuned for my 5sp swap too if you plan to do the same! Appreciate your support!

@jeremythompson6822 5 ай бұрын

@@DriftMagic I did the relocation kit on mine. Cleaner look. I need to do my timing belt and injectior replacement too and I came across your channel.

@angelo6167 5 ай бұрын

Dude this whole 300zx series is gonna help me big time. I couldn't be more greatful for your videos!!

@DriftMagic 5 ай бұрын

Glad it will help!!

@angelo6167 4 ай бұрын

Also a quick question, my 300zx still has the coolant bypass lines under the plenum, should I drain the coolant first before removing the plenum?

@DriftMagic Ай бұрын

I drained everything because I removed the radiator for more space

@Nolepower Ай бұрын

Man if you lived in NC, I would bring you my 1992 twin turbo for that same job..

@jonathanle972 6 ай бұрын

Nice I’m pretty much right at the point you started this video. This is going to be very helpful when I start putting everything back together. Thank you!

@DriftMagic 6 ай бұрын

Awesome! I'm happy to hear that! Lmk if you have any questions at all. Reach out to me on my IG, i see those messages/comments much faster than here lol

@jonathanle972 6 ай бұрын

@@DriftMagic Thanks man, will do. I gave you a follow on IG. 🙂

@adamhashimoto8515 6 ай бұрын

👍📹

@chadjohnson6229 5 ай бұрын

Any timing/running problems yet with the broken CAS alignment pin you experienced? Mine is broken as well and I was told that the broken pin is only needed to align the CAS during install. Thanks!!

@DriftMagic 5 ай бұрын

Nope everything runs perfect! I was able to throw my timing light on it and was almost spot on at 15 degrees from where i temporarily set it too lol. Timing was steady and was beautiful to see haha. Hope this video helps!

@chadjohnson6229 5 ай бұрын

@@DriftMagic Thanks for the reply Sir! All of the forums that I’ve read have conflicting information. Some say that a broken CAS alignment pin on the camshaft will allow the timing to wonder, thus a cam replacement is needed. I just don’t want to go back into the engine and was considering trying exactly what you did to remedy the problem. Replacing the exhaust cam would suck if I could have just aligned the CAS back up and resolved the problem.

@DriftMagic 5 ай бұрын

Yes that wouldn’t make sense unless the teeth were stripped. The alignment tab is simply just that, for alignment. And if you can locate the portion that broke off, take a small metal dowel that could fit in there and put a tiny amount of jb weld on it, it would serve the same purpose. But yea I just eyed it lol. If you hear it in the video it sounded like new on start up lol

@chadjohnson6229 5 ай бұрын

@@DriftMagic Great info and a very detailed video as your timing belt video was the only one on KZfaq that covers the broken CAS alignment issue - excellent job!!

@DriftMagic 5 ай бұрын

@chadjohnson6229 I appreciate it!!!