Going to remember the next time I get a scam call to ask for their address.. Might have to go over and take a dump on the porch Lol...🤣🤣🤣

Not only is your work ability outstanding but your sense of humor makes me keep coming back watching your videos

HI warren thanks for all the video's you take time to upload all info and content much appreciated

I had my wife listen to you telling us about the call from Florida. She laughed her ass off, thought it was so funny.

I read something in VIZ (the adult comic) if you want rid of a scam caller, hand your phone to a toddler and tell them it's Santa. 😂

Thanks for the video Warren. Your humor gets me every time. 😂😂 Appreciate the time/effort.

Runs pretty dang good. Sounds good. The comedians really know how to deal with the scam phone calls. What I want to do is tell them whoever they are calling for has passed away and go on a rant over the phone and keep them tied up for a bit.

You've just entered the no shit zone,lol, that's a good one.

3/5/24..Great video finalizing engine work on this particular CAT D4. Also had big belly laugh at your report with telemarketer..."you give me Your address...so you could 'make a 'deposit' on her front porch!' LOL !😂🎉 Always enjoy your educational commentary & your incredible work ethic & attitude! ✅️A+ Anxious to see/hear this D4 start & run after that 'new' Radiator is in...stay safe & carry on!🔧⚙️🔩🍺😊

today Warren you have won the highest award I have given your shit on the porch what a smile I that gave me thats a good one thanks

3304 & 3306 old engine's that made CAT'S name

Nice to see that gauge pegged to its limit .

Brilliant way to address scammers. I am really going to unload a ton of pig manure on someone's front driveway one day. 😂 Thank you forvthe video. I love those old CAT dozers.

times have really changed, people dont even want you to shit on their porch anymore!

Thanks Warren, you always put up good material, and try to give good tips. I know that scam caller wasn't expecting you to say you were gonna come shit on her porch, that's a good one lol. G-d bless.

Thanks for the video! It seems your happier working on real iron instead of plastic and wires.

Nice to see Les Claypool is staying active.

I would like to let you know that you have so much natural teaching skills

Looks good, thanks for the update

Nice job on a very uncomfortable and hard to get to engine. Thank you for bringing us along.

I always like your videos. You're a whizz at everything. I'm not a big proponent of RTV but when I'm trying to mate vertical surfaces I'll put a small squirt of RTV on each corner just enough to hold that gasket to one of the mating surfaces. Then I can make the final alignment when installing the bolts.

Morning, Warren. Kindest regards 🇨🇦🇨🇦

Warren is a wrenching machine nice job

Well done warren. Another one done for another life

Another Great Video, Warren. On top of the mechanical knowledge that is shared on your Channel, I really appreciate your stories and sense of humor. I had to laugh about the telemarketer comments, you know you have done your job when they hang up.

Hi Warren thanks for the update

I am just commenting to feed the algorithm Warren. Thanks for sharing. Best Wishes to You and Your Family.

Man that runs good! Good job!

the engine sounds super nice. 100psi sounds like alot. hopefully the bearing arent too tight but you'd know sliding them in if they were I guess. It sounds brand new

Thanks warren 👍👍. Greetings from the Netherlands😉

Nice come back on the scam call, I love it, I used to ask them for their company name and address, when they ask why I would want that I would say that I have to account for every hour of production through out the day, that our rate was $150 p/h and a min bill of $75 for 1/2 hr and under I needed to send an invoice for billing to account for production time, not to mention your call took me off a paying job that’s on a deadline, I always, without failure got a “CLICK” on the other end. 😏😉😂 I enjoy your videos, appreciate your walk thrus on the reassembly and the time and effort you put into the videos.

Dude cannot you worked the whole time without tapping up that wire out of your way!!! too funny!

It's a runner you are always worth the time to watch.

Hello Warren. The injectors on our D4D are the same but for the inserts that hold them in. There's a tool with splines on for tietening the injector in.

Awsome video Warren, thanks for sharing Always learning from your videos . Thankyou Safe travels bud 🎉🎉

Great work, Warren love watching your videos. I run my own shop and have learned a lot about how to diagnose and repair different equipment. Keep up the good work.

Great video Warren glad to see this little dozer coming to gether. Glad to hear it start and run without much trouble. Oil pressure is Wow never seen it that high on one of these little engines. Looking forward to your next video stay safe Warren.

Thanks for another great video Warren🥰

Seems to be a lot of those scam calls about at the moment 😯 Looks like you are making good progress on the cat warren . Sounds great .👍👍👍👍

Thanks Warren

Another great Video 👍👍

Nice jib Warren. Got part 2 up. Pretty Sweet sounding. Get her done baby.

I worked in an automotive machine shop and would answer the phone every once in a while, they would ask to speak to the owner I would tell them he went out to the woods to shit and the hogs ate him. They didn't like that. Warren it's good to see your still around, looks like your very busy. It is so nice to see someone that knows how to use a torque wrench, most of the guys on KZfaq junk it like there, you know what.

I found that a little hi-tack cement would hold those gaskets in place, otherwise they could be a pain.

Looking Good

Very nice job Warren another one down the road

The engine sounds brand new, good job Warren.

Hot porch dumps are the best

Ways to do that when we were young take a crap on their front porch and put greetings from Rudolph it was always around Christmas time

Very good , going to use that shiting on your porch 😂😂😂😂, great work, thanks for sharing 👍💨💨

Great work Warren, I enjoyed your telephone scam call solution.

Sounds good driver.

Sir I have to say with tung and cheak as you did with the teq and savy in your response to the woman who called from the sunshine state of Florida request for your home address you handled it with the upmost respect as any schollar and gentleman with have your knowledge and expertise would lol well done

Hey Warren. Another great job done by the master!! 100 pounds does sound like a lot for oil pressure. I’m sure that too much can be as bad as too little. Thanks much for the video.

Thanks Warren, always nice to hear the engines going 👍

Nice job Warren

Dont forget to reinstall those pesky block plugs the "machinists" always leave out. :) Stay warm brother!

Great video thanks for sharing

good vid warren

A MASTER AT WORK !

LMAO, that's how you take care of telemarketers when they call you.

Thanks for the spam tip can’t wait for the next call

Sounds good after your refurb

"shit on your front porch" 😂

Thank you.

Got er done! 😊

Thanks for the deets...

Warren, you asked a few videos ago what we liked to watch on KZfaq... Of course, No 1 is you (goes without saying), but we also watch some you mentioned like Kurtis in Australia (CEE), I C Weld, Snowball Engineering in England. Also watch Simple Living Alaska (but can't really see how they manage to fund their lifestyle). Just discovered a new one from England - SHED RACING with Ivan Dutton, retired racing driver - I think you'd enjoy his stuff.

👍👍👍👍...i like that approach with the scam calls...i think i might , perhaps try that,...with the porch...and the shit... thanks for another video...see ya on the next 👍👍👊

OP Relief Valve

LMAO...I will try that with my next spam call.

👍👍👍👍👍

100 psi gauge pegged at idle is way over spec, even if cold, might want to check the pressure relief

👍

Gotta mess with scam callers by going "Hello this is (fake name here) with (your local county/state police dpt) how can I help you today?" haha!

You're the best dude......i get calls all the time about medicare and get totally vulgar on the phone till they hang up..im with ya

How much oil pressure, all of it. Good running Cat. Great work Warren, your the best.

Where there is smoke, there must be farr!!!

Hay Warren did you see any video of wreckers pulling tractor trailers out of the snow banks caught in the blizzard. Seems to me the stress Put onthe tractor could definitely cause damage. A wrecker operator when asked about the truck drivers said most don’t speak English and have never seen snow.

Nice job shit I got excited when she fired

25:30 Must be an optical illusion where the gear teeth look really torn up.

I tell my friends to call twice. I won't answer a number I don't recognize. Scammers don't call twice.

👍👍👍🇺🇸🇺🇸🇺🇸

Warren. Do you have 1/4 drive universal joint sockets in 1/4", 5/16" and 3/8. I put those on my socket driver handle. To tighten worm drive hose clamps. I do bevel the outside of the 1/4" socket to fit up on the hex closer

My son wants to know what brand jumpsuit you are using.

Hey Warren im working on a 3208 cat and having trouble finding a crank damper pully aka harmonic balancer. Have you ever used damper doctor in redding Ca to have a damper rebuilt?? If not No big deal though id ask you appreciate it Thank you sir!

Thinking about it, Warren would be one of the best guys to be with on a submarine. Not gay and he can fix anything. Those are probably the top 2 traits you want in a submariner lmfao

Do you ever use gasket sealer/compound?

Hey Warren I was just wondering how often do you have your torque wrench recalibrated? I noticed you use it quite a bit and I took mine in not too awful long ago because somebody recommended that and I was blown away how far off it was. Anyway seems to run good brother I'm amazed every time I watch one of your videos.

Hmmm ! dashboard pox ?

Warren have you tried a little bit of grease on the gaskets to help keep them in place

Well I guess nobody likes shit on porch. Well done👍

Hahahaha

lol warren

The occasional times that I that I answer 'Spam' or 'Telemarketer' calls, I tell them to get off their asses and get a 'real' job!

Not a better sound than a good ole cat.

For the love of God, why don't you tape that white wire up hanging above the motor it has been messing with you from day one.😅

I think I’m first

Your scammer response - 😂 Whatever we can do to waste their time and perhaps get them pee their undies just a little and repent, such as: as if whispering to someone else "the trace is almost there...yes...there they are ... yes ... YES."

Classic scammer reply!