35w VS 55w HID color effect difference

Рет қаралды 818,105

12 жыл бұрын

This video shows you what happens when you use difference ballasts. Most people don't understand why some HIDs show a different color with the same temp bulb. Usually when you use a high wattage ballast, the color washes off towards a lower temperature. The higher the wattage the lower the temperature color will show. Most people will say to just change the bulb temperature if you want a different color which IS true if you stay with the same ballast. Now if you change the ballast then that is where it will get complicated.
Video Description:
1st Demonstration - The 55w ballast with 6000k bulb will look like the 35w with a 5000k. Both are white.
2nd Demonstration- 55w with the 5000k will look more the the yellowish white color of a OEM HID system and/or of a OEM halogen bulb. And the 35w with the 6000k will have a white color with some tint of blue.
****FOR MOBILE VIEWERS**** 10/5/2012
I've noticed none of the Annotations can't be seen on a mobile device. I guess the KZfaq app doesn't support it. It may not make a big difference but I just figured I'd let you know It can be a bit useful to see them especially at the end of the video and my spelling errors LOL ;)
Thanks for watching

Пікірлер: 279

@goldblade84 7 жыл бұрын

I know this is an older video, but it is probably the most useful one I've ever seen about HIDs... I have spent a lot of money messing with headlights (HIDs, LEDs, of different makes and colors etc.) And from a performance aspect (pitch black rural / mountain driving), 5000K - 5500K @ 35W and 6000K - 6500K @ 55W is definitely the way to go in terms of color temp. I am currently trying a 6500K @ 35W for a high beam, and it is definitely too blue, the hotspot on the ground stands out vs. my 6500K @ 55W low beams, and doesn't do nearly as good of a job illuminating the road, trees, etc. as the old 5000K @ 35W. For city driving and cool styling, sure 6500K @ 35W is going to be okay, but if you drive for long periods in pitch black conditions, you might get some eye strain with that color temp / output.

@keepitthoro6768 5 жыл бұрын

Wei Wang .so 100watt hid ballast maybe need 8k bulbs? to make them match a 55 watt 6k color???

@Manuel-we5iy 4 жыл бұрын

What do you think of 55w 5000k? Too yellowish ?

@gamingclash5 3 жыл бұрын

@@Manuel-we5iy for my taste they are too yellowish. I would recommened a 6500k ,if you are going with a 55w ballast.

@mcfejocEsq 7 жыл бұрын

I think he pretty much nailed it. 35W + 5000k is brighiter than 35W + 6000k but not as bright as any of the combinations using 55W. But that shld have been obvious. more power means more lumens. even with incandescent bulbs at home. just freeze the frames for the 2 demonstrations and compare them side by side. great job, Chris.

@marztar 9 жыл бұрын

im cheap i just drive with a few candles duct taped to my bumper cant go too fast though it gets annoying jumping out relighting them

@davidriley9194 Жыл бұрын

Good video I know it’s old, but I personally prefer 35w HIDs than a 55w as 55w just wash the colour out, for example if you use 8000k HID like I have in mine, the 55w HID will shift the colour down more like a 6000k. It also typically melts or burns the mirror reflector chrome out. Which is why 35w is way better less likely burning the reflector chrome out

@elias2117 10 жыл бұрын

Thanks so much for this video, it helped me make my decision on what bulb to pair with what ballast. Thanks again.

@Gingycat 8 жыл бұрын

One of the best demonstrating HID videos out there :)

@agrader4880 5 жыл бұрын

Eightywun especially the OJ Simpson gloves 🧤 😂

@jonathanbach7978 7 жыл бұрын

Very helpful video!! Thanks for uploading and doing this demonstration. Been having problems with my 8000k on my 05 Mustang.

@21crazz 7 жыл бұрын

Your welcome

@sycotic51 10 жыл бұрын

I love how everyone is saying you need to use the same bulbs to compare XD 35w with a 6k bulb and 55w with a 6k bulb. He fucking did that! He showed 35w/55w with 6k and 35w/55w with the 5k

@21crazz 10 жыл бұрын

OMG!!! THANK YOU!! someone understands :D

@sycotic51 10 жыл бұрын

Chris Canela Some people are just... Damn XD

@sNxUCExhAVOk 11 жыл бұрын

Glad i found ur vid bro.gave me alot of information how to go about my hid swap.Here in Hawaii,any form of blue tint to ur headlights is almost immediately a means to get pulled n slapped with a fine and a court date.found that the hard way with the halogen bulbs with the slight blue tint.been wantin to do a hid swap but wanted a nice bright white with no/barely visible blue tint.thanx to this im goin 55w 6k after i retro fit headlights with hid projectors.preciate the vid bro.stay up.

@jtpro 5 жыл бұрын

I know this is an older video but never got a chance to thank you for the share. I have 35 watt ballast for my low beams and 35 watt for my driving/fog lights and 55 watt for my high beams. They're all in 5000k. I like the 6000k in the 55 watt. I did the 4 high mod in my Silverado and the high beam is close to the low beam but I think the 6000k would make it look better and serve the purpose of the high beam better.

@TheSensibleCookie 11 жыл бұрын

Good video. You may also find with cheaper 55w ballasts, it can wash out the colour of the bulb causing a yellow tinge even with same kelvin (e.g. 6000k).

@tan8268 11 жыл бұрын

I should get 55w ballast with 5000k bulb. this is a very useful vid.. thanks.

@sachinnair1613 6 жыл бұрын

I'm still a little confused on 35w vs 55w. If I want the pure white color for low beams in projector housings, I should go with 35w right?

@ANDYW031084 6 жыл бұрын

grate video ! i dont buy any more 35w balast always 55w balast and 6k or 5k bulb grate light output !

@21crazz 11 жыл бұрын

9 years??? That's impressive. I have VVME German HIDs kit. So far I had them for just over a year and No problems.

@Joepizzurro 8 жыл бұрын

Thanks for the video. You helped me make sure that the 6000k with 55w will not be too blue. I was thinking about 4300k but with a 55w I think it will wash too yellow for me..

@21crazz 8 жыл бұрын

+Joepizuro No Problem :)

@progressiveokay 8 жыл бұрын

same for me, big THX from austria!!

@mindaugasbaltutis7107 5 жыл бұрын

Go for 5000k 55w

@JuanCuarenta27 12 жыл бұрын

Very nice video explaining the color temperature :)

@haider4k 12 жыл бұрын

Perfect demo !

@marq333 10 жыл бұрын

What brand HID kit did you use?

@rizkyp 6 жыл бұрын

did you end up using the 55 or the 35? did you using a seperate harness or using the original car wiring to power the 55w? i am thinking of using 55w ballast on my e46 but not sure if the OEM wiring can handle it.

@saulvazquez7548 10 жыл бұрын

so here you talk about 35w and 55w ballast, but is there such thing as 35w and 55w bulbs? thanks i was just told i need a 35w bulb for my factory ballast on my 2005 300c, thanks again P.s i like the 35w ballast with the 6000k

@marioatrucking 10 жыл бұрын

Nice vid bro. I'm going with 55w and 4300k lights. What has side tract me is that they sell or something about 55w lights? Now I'm confused. .. I want the brightest possible. So if 55w and 4300k in 55w is what I need so be it. Lol what do u recommend? Oh and I'll be using 55w with 3000k for my fog lights. So if there is a difference in 55w light. Can u shed some light on this? Thanks again and awesome vid.

@ShattiUnique 7 жыл бұрын

If im not mistaken now they measure brightness with lumens right? I mean watt doesn't matter if it have a higher lumens.. watt show the power consumption only..

@MrTech190 11 жыл бұрын

35w 6000k it is! Thanks for the comparison!

@pabloarvelo5969 9 жыл бұрын

Thanks for the video very helpful. So what i'm guessing is that is OK to swap ballasts from 35w to 55w while keeping the existing light bulb. the difference will be brightens and color temperature shift, right?

@crashinc06 11 жыл бұрын

didn't read many comments ,but most of the colors are rated for the 35 watt ballast , when you throw a 55w at it basically washes the color out and drops the kelvin , so 8k is more like a 5/6 or a 6k is more like a 5/4k , but all depends on the bulb, some manufactures rate a 8k when it's actually a 6 and so on

@sNxUCExhAVOk 11 жыл бұрын

@Chris Canela I dont mind that all.As long as dey fade to white im good.Btw,one more question,would i be facing any temperature issues using an aftermarket kit?As in will i encounter any melted wiring harness issues n what not.Have heard some stories about lenses,housings or wires bein melted but couldnt find any sufficient evidence to bak these claims.Any insight would be appreciated as i dont wanna spend money for an HID kit to only end up having to buy new headlight assemblies or wires.thnx.

@HexaFreak 11 жыл бұрын

PERFECT ! Thanks a lot i know what to buy now =) !

@frankpeters1592 10 жыл бұрын

THE POINT IS: THE 55W BALLAST WILL PRODUCE LESS OF A BLUE-TINT ON THE KELVIN TYPE BULB (4300-1,000k). IT PUSHES THE LIGHT WAVES TO BE MORE TRUE. THE VIDEO DEMONSTRATES HOW A HIGHER PUSHING BALLAST WILL MAKE SLIGHLTY LESS TINT COME OUT. YOU CAN PLAY WITH THE WATTS ON THE BALLAST + THE KELVIN OF THE BULB.

@VictorEloy93 9 жыл бұрын

Hey this question is open to anybody who may have a possible resolutions. I bought 35 W 8000k H ID lights for my Honda accord 2004. And it seems that the side with the battery the drivers, is a lot brighter and wider then the right side. Any reasons why this may be I'm thinking because of cheap aftermarket bulbs and or ballasts?

@br37710 6 жыл бұрын

I know this is 3 years ago lol, but if you are still in this situation, buy resistors.

@ABPalacios 12 жыл бұрын

does the bulb matter? if a kit has a 35w ballast...does that mean the bulb needs 35w bulb? or the bulbs dont have wattage? cuz i have a 35w 6k kit...and i want a white like the 6k 55w your showing...would that effect the bulb if i change the ballast to a 55w? please answer me back.

@notic99 12 жыл бұрын

is it possible to get VVME 55W 6K for a 01 buick regal?

@sticksnstones23 11 жыл бұрын

I just put nokya arctic white stage 1 (55 watt 7000K) in my accord . my 1st impression ; too blue/not as bright as the stock low beams that I replaced. I thought these were going to light the road up better without blinding others.....did I make a bad replacement?

@tombob4002 6 жыл бұрын

do u enjoy blinging every other car u pass? searsouly i want to know do u get a kick out of it or something?

@JuanCuarenta27 12 жыл бұрын

hey do you know if a relay kit is needed for Bi xenon HID bulbs ?

@FelixReyes809 5 жыл бұрын

Have anybody try using after market 55watts BALLAST and bulbs? I read on a forum that if I you use 55watts BALLAST there's a risk of frying the oem module..

@pachojojo1 11 жыл бұрын

@ Chris Canela yoooo Dude but what about if the 55 watts will burn my cables? my system?? like it might be like over heat on my cables...? do i have to change anything in my car or it is safe just to plug a 55W in my car...? thank bro...!!!

@mecha888 10 жыл бұрын

hids are perfect in a projector type housing that has the appropriate shield in it so people don't get blinded. People who put hids in a reflector type housing thats meant for a halogen are the ones giving everyone else a bad name. Yellow or white are legal in Australia but any blue then you attract the wrong attention easy. Makes sense to aim aftermarket fog projectors lower too as not to blind oncoming traffic.

@waz9407 7 жыл бұрын

Good comparison. Did you have any issues with your headlights long term with 55w HID in projectors? (any damage to projector or anywhere else) Thanks!

@21crazz 7 жыл бұрын

no I haven't

@sambulucci 9 жыл бұрын

helpful video thanks

@leroijr407 8 жыл бұрын

great video... concerning these idiots complaining about you using two different bulb Temps on testing; they must have a lil bit of Forrest in them, lmao. You showed each bulb with both ballasts. perfect video. I seen 55w with both bulbs and 35w with both bulbs.

@21crazz 8 жыл бұрын

Thanks

@dashcamdude6690 3 жыл бұрын

Which type bulb would you recommend 5000k or 6000k

@nismo8319 12 жыл бұрын

I run 55w in my car and I have them wired with a relay. Not a problem with them yet and it's been about a year. There has been problems with fried wiring and it is do to initial start up. It does depend on the car and the gauge of wiring used. Be safe and use a relay and fused link from the battery.

@Grekordz05 11 жыл бұрын

I completely understand the different watts with the different bulbs and what colors and depth each will give. I also know that with more watts going out, it is using more power and there fore creates more heat. Is it necessary to use a wiring harness and if so can you put a link for my 2008 Honda accord coupe. I look them up I just don't know what I searching for. As iam new to ALL of this!

@21crazz 11 жыл бұрын

Your welcome.. just so you know, 55w 6k will look blue at first but once you let it warm up for a few seconds, it should fade out to white.

@preetManiMani 7 жыл бұрын

what if I use 100w ballast instead of 35w ballast that I am currently using on a 6000k HID. I want to increase the light through of my HID as i feel it is a bit low. Someone has suggestd me to replace the ballast with 55w or higher. Could you please guide.

@hardyb311 7 жыл бұрын

Get a genesis hid kit

@ComMando9100 4 жыл бұрын

Guys can you help? I wanted to switch from 35W H.I.D to 55W but while I already got my 55W bulbs, I just learnt that 55W ballast should go to a well ventillated area cause they draw more power and thus more heat will be produced, also wires maybe not up to the task. So if I already had my bulbs anyway I gave it a try and 55W bulbs worked just fine with the 35W ballast, they gave me strong white color, they turned on fast and they worked so far, I've been using them for a full day. Should I continue using them this way? Or will I damage to ballast? I only care about the ballast, I already know the bulbs will last only about 1000 hours instead of the 2000-3500 but thats not such a problem for me. But I don't wanna lose the ballast. Can someone help me with that?

@GZZZILA 11 жыл бұрын

@Hamiltoncouple01...I just bought replacement 10000k h1 hid bulbs and it says 35watt on it. I thought it didn't have wattage on it either but it does.

@hamiltoncouple01 11 жыл бұрын

How can they burn out your wiring if your factory harness is design to run on 55 watt low beam and 65 watt high beam halogen???

@musvlehead 12 жыл бұрын

Can anyone answer this for me plz..I have a 35w hid kit now with 35w ballasts.I'm thinking about getting 55w bulbs and using my same 35w ballasts will they work properly or will I have issues? Will the 55w bulbs work with my 35w ballasts?? Or do i need a whole new set up(55w ballasts) to run 55wbulbs?? thx!

@brandonwright2067 6 жыл бұрын

Very very good video

@Grekordz05 11 жыл бұрын

do HID's look better than halogen and are they better quality? or what is the difference?

@MoparGuy1625 12 жыл бұрын

What's with the OJ gloves?

@rio20d 3 жыл бұрын

most hid bulb are for 35w ballast thats just standard like any oem hid, 55w ballast is just an overclock version, so if you buy a 6500k hid bulb thats for 35w ballast, once you put them with 55w ballast, it will be brighter for sure but the color temparature will be washed out by about 1000k lower, it will look like a 5500k hid bulb.

@williamvaughan1218 Жыл бұрын

William Vaughan0 seconds ago I drive my 35 watt 5000k bulbs with a 50 watt ballast it eliminates the blue and is perfect in my opinion no noticeable degradation in peformance or longevity.

@newfieledman9164 7 жыл бұрын

i have a 2003 Grand Am 3.4L v6 problem with my headlights i have HID lights with Can-Bus Ballasts the problem that i am having is the when the lights are shinning on the wall or ground it is impossible to adjust cause my head lights has a center piece that is kinda open in the center and i have noticed on the standard halogen bulb has a painted end on the bulb when they work fine but not bright enough so i decided to go with the HID and then noticed that the end of the bulb has no paint on the tip or chrome so my problem is how do i fix this the lights are shinning everywhere but cannot adjust and has big shadows on the ground and on the wall my reflector center piece has no chrome tip is there away that i can make a reflector to make the lights shine better look up the headlights and you can see what i mean about the open center reflector.

@JB-fd2zh 4 жыл бұрын

Had that too (like a figure shaped shadow pattern) on a 2004 Grand Am even after installing new OEM assembly, must've been a defect in design. Switched to projectors but that narrowed the beam pattern with LEDs.

@MontrealMan1970 11 жыл бұрын

good demo bro.

@badboybry15 11 жыл бұрын

I just want a blue tint to my hid's for my R6... which configuration should I purchase? Also If you know of a good company to purchase a hid kit for a bike if could relay that info I would greatly appreciate that. Thanks

@danwat1234 12 жыл бұрын

What about 100w HID ballasts (Ebay/Aliexpress)?

@G8GTJav 12 жыл бұрын

Interesting. Thanks.

@carldagobert3443 11 жыл бұрын

hi i wanted to know which hid kit is good for me to buy and which wattage would be good for me to buy for the ballast

@ericf914 11 жыл бұрын

What is the wattage on the bulbs 35 or 55??

@spokes121 12 жыл бұрын

are hid lights illigal in australia

@solrus20 9 жыл бұрын

what bulb did u use 35 w or 55w?

@JediWigSplitta 12 жыл бұрын

Can some one explain to me how this work? The higer it goes the different color it puts out ? 1200k comes in a purple color does that mean them voltage to ?

@shavardohandfield2835 6 жыл бұрын

did the 55 watt ever burn your headlights

@RodrigoMJ32 12 жыл бұрын

So if I wanna go with a more Mercedes, like color I would go with 55w ballast and 6000k right ?!

@earlcruickshank2449 5 жыл бұрын

I am afraid to order a 55watt 8000K kit...because i feel they will give me a 10,000k bulb to achieve the 8000k...when I am infact trying to get the 6500K color. However, I dont want to order 6500k 55watt and then they send 6500k bulb and it washes out to 4500k lol...please help me...i am in a predicament.

@progekone 12 жыл бұрын

with a 12v battery i can use a 55watt ballast right??

@jattlalkar3640 8 жыл бұрын

What's with the OJ Simpson's glove?

@mj1s735 8 жыл бұрын

Oil from your hands is not good for the bulbs. It has nothing to do with murder!

@JzVQde 6 жыл бұрын

😂😂

@agrader4880 5 жыл бұрын

Jatt Lalkar haha! 😂 😆

@FloatnFlow 11 жыл бұрын

can i replace my factory 35W bulbs with 55W bulbs? Or do I need to change the factory ballast also?

@lanceanicetoa.alipoyo1731 5 жыл бұрын

Its ok to use 55w ballast to 35w bulb?

@davidgarcia887 9 жыл бұрын

Want a bright white on my 2001 chevy silverado, what would you recommend

@kevs7935 4 жыл бұрын

55w 5000k

@DynamicSoundsEnt 8 жыл бұрын

DUDE YOU ARE AWESOME FOR UPLOADING THIS MAKE SURE YOU GOOGLE PAY ACCOUNT IS SET UP CAUSE YOU NEED TO BE GETTING PAID, I BOUGHT A CAR AND IT HAD TWO DIFFERENT COLORED LIGHTS. PREVIOUS OWNER DID A HID CONVERSION AND I FIGURED HEY HE SWAPPED A BULB NO BIGGIE WELL I TRIED ORDERING NEW BULBS , SWAPPING THE HARNESS ? AND I WAS FREAKING OUT ASKING MY SELF DO I HAVE OCD CAN ANYONE ELSE NOTICE THIS ... YEP THE PAST OWNER HAD MIX MATCHED BALLAST

@21crazz 8 жыл бұрын

HA cool. Yeah man.. I had no intention of getting this many views on this video. I just made this video since I so happen to have two different HID kits at the time. Funny thing is I could of gone all out on this video. I work with a small independent film company and if I wanted to I could of gotten some camera gear, lighting, audio setup, etc. But I didn't cause I didn't care much about the volume of attention on this video. lol

@21crazz 8 жыл бұрын

Now I'm starting to think of possibly remaking this in a more professional style video with my newer BMW lol

@DynamicSoundsEnt 8 жыл бұрын

+Chris Canela do it man keep grinding

@Lonnie91a 8 жыл бұрын

Ballasts's?

@RodrigoMJ32 12 жыл бұрын

SO IF I WANT TO TRY TO MATCH IT TO WHAT THE MERCEDES,BMW OR OTHER CARS HAVE I WOULD GO WITH A 55 WATT 6000K RIGHT??????

@intheknowsquared6721 10 жыл бұрын

Helpful video, now I need to change out my ballast (35w) to get rid of the hint of blue on my 6K bulbs with a (55w) ballast. Do you have any info on AC vs. DC ballast. I heard AC was better. Let me know if you do. Thanks again

@lemer3 10 жыл бұрын

Hey Alex, AC refering to Alternative Current means it is the home electricity which shocks us when we touch a cable an ground. DC referes to Direct Current and this type of electricity is usual on batteries, and you can touch the positive and negative of the source and it doesn't shock. The purpose of a ballast is to transfor DC Into AC and amplify it. The purpose of an AC ballast (found in fluorescent fixtures at home) is to amplify the the voltage. AC and DC ballast will throw an ignigter reserve when first powered on, and then reduce current and voltage depending on the bulb. Hope this helps.

@riskyourlif3423 9 жыл бұрын

What HID bulbs and ballasts did you end up sticking with at the end?

@rogerlee6289 8 жыл бұрын

+RiSKYouRLiF3 If you want durability and reliability over quantity, then you should get the HIDs from Morimoto. They are the next best thing next to Denso which are OEM ballasts

@ElNegro2471 11 жыл бұрын

I want my car to look like a BM or Mercedes's lighting what K should i buy? Oh and it has projectors....

@saliciouscrumb7418 11 жыл бұрын

Didn't know the ballast influenced the color. I thought it was just the output (brightness), but color? Interesting. I have Mcculloch HIDs. They'll be 9 years this year, I have a feeling they're going to go bad on me this year. What brand are the bulbs you got there?

@slideways89 12 жыл бұрын

what HID system is this?

@xXNorw3gianXx 11 жыл бұрын

Thx! Thats good, cuz then i know i don't get blue light, but white :)

@farukyou88 11 жыл бұрын

of course will be different color.5000 kelvin is closer to white and 6000k is closer to blue,if you look up kelvin color chart :) the difference between 35w and 55w is just brightness and heat which causing from the power drain...

@21crazz 11 жыл бұрын

Just buy the VVME HID kit. they work fine with no error codes

@21crazz 11 жыл бұрын

Yep...The higher the wattage on the ballasts the more brighter it will be. The temperature on the bulb has nothing to do with the brightness only the visibility on the road..

@pachojojo1 11 жыл бұрын

Hey dude so basically you suggest to use the 55w to have more brightness...? 6000k 55w....? Thanks Sr.

@juniormorales559 11 жыл бұрын

so what if i buy a 55w vvme hid kit 10000k blue are they gonna be white or blue?

@phatrajavin 12 жыл бұрын

Does using 55w result to hotter bulb than using 35w? If yes, will it damage the headlight housing? thanks,

@isrealperez9069 2 жыл бұрын

2004 BMW 325xi I shouldn't use 55w 6k on my 35w ballast or is it okay I can I just wanted to brighter on the road

@WilldaBear 2 жыл бұрын

35W is bright enough for me. And 55W's over time will burn your housing.

@isrealperez9069 2 жыл бұрын

@@WilldaBear if I get a 35 W how do I get it to be bright white I think what came in the mail was the 55w

@WilldaBear 2 жыл бұрын

@@isrealperez9069 I would ask the seller how each pair of 35W's look when on. I went with 5500K in 35W. Real bright and white enough for me.

@xavierenz 11 жыл бұрын

thanks bro

@VuongTruong009 9 жыл бұрын

Did you use same bulbs for your headlights? I just bought 35w 6000k HID, but I want to 55w ballasts on those bulbs. Do you think it will burn my bulbs or melt something?

@CarReporter12 9 жыл бұрын

No it wont melt anything but you will have following effects: 35w 6000k bulb when powered with 55w ballast will give colour output as 5000-5500k , your starting warmup time will be quick, More brighter than 35w. The only downside a slight less life of bulb but that again only few hours so that negative point is negeligible plus you will get color like cold white led like on the new merc similar color to that which is eye candy to me and is my current setup.

@mombasasherman 8 жыл бұрын

+Mayur Huria Does 4300K 35W give you the same output as 6000K 55W ?

@CarReporter12 8 жыл бұрын

mombasasherman well it will not. All depends upon bulb and ballast quality. I have used 35w ballast like DLT and hylux who shifts color even in 35w. Also what you mean by 6000k 55w. Does it mean 35w 6000k bulb with 55w ballast. If so then it will give output as 5000k but will be brighter than 35w 4300k. Actually most of 55w bulb available in market are actually rebagged 35w bulb for example if a bulb says 6000k 55w it is actually 8000k 35w bulb rebagged and sold with 55w ballast. Remember one simple thing a 35w bulb at 55w will be loose ~700-1200k temperature but with increase in output

@itptires 11 жыл бұрын

yes it does, the different colors measure less lumens

@VictorDiaz-gw8vr 11 жыл бұрын

if i have 30k on 55w will they be white or blue?

@JuanCuarenta27 12 жыл бұрын

Yea(: ok so i basically want the color that 6000K 35W has. but i want it with 55W. So should i buy 8000K 55W? since it will lose color 8000K should be fine right??

@licasixpack 8 жыл бұрын

Wow! Both colors are bright enough ,to see all the fingers from oncoming traffic lol the glare is stupid

@rogerlee6289 8 жыл бұрын

+lica putina What glare are you talking about? It's in projectors so there are no glare. It would make more sense for you to say that if it were reflectors.

@johnargue2977 8 жыл бұрын

Good video.thumbed up. Now I'll put 5 sets of lights to make it daytime.. . Just kidding.

@johnargue2977 8 жыл бұрын

+Jeremy Sinclair theres a video showing thin ballasts arent as bright as the older thicker ones. either way ,i think any hid is a improvement over oem.