3D Printed Iron Man Helmet with Fully-Functional Heads Up Display!
Рет қаралды 745,084
Жыл бұрынTony Stark built a fully functional heads-up display (HUD) into all of this Iron Man helmets. I recreated the entire experience in my real Iron Man helmet.
Thank you to this video's sponsor PCBWay! PCB manufacturing, PCB Assembly, 3D Printing, CNC, and more! www.pcbway.com/setinvite.aspx...
#ironman #tonystark #ironmanhelmet
Thank you to J6 for his work on the display graphics!
/ codenamej6
Follow these Iron Man Cosplayers:
/ dat_boi_builds
/ jtquantum
/ atlanta_ironman
Special Thanks:
@EmilyTheEngineer
@theHacksmith
@tested
---------------------------------------------------------------
Components:
NVIDIA Jetson Xavier NX:
Info - bit.ly/NVJetsonNX
Purchase (No longer available?) - amzn.to/3IgkXnh
Example Software - github.com/dusty-nv/jetson-in...
Sensors (GPS, 9-DoF, Environmental Sensor):
Adafruit: bit.ly/AFKerseyFabs
Teensy 4.0:
Info - www.pjrc.com/store/teensy40.html
Purchase - amzn.to/3WKjs5e
Displays:
AliExpress: s.click.aliexpress.com/e/_DFS...
Cameras:
Arducam Mini IMX477: amzn.to/3Q6w4AS
Remote Display:
BIGTREETECH Raspberry Pad 5: amzn.to/3i6sAC2
Software:
GStreamer: gstreamer.freedesktop.org/
Simple DirectMedia Layer: www.libsdl.org/
Primary 3D Printers:
Ender 5 Plus (Creality): bit.ly/KFEnder5Plus
Ender 5 Plus (Amazon): amzn.to/3oCE1l3
Ender 5 Pro (Creality): bit.ly/Ender5Pro
Ender 5 Pro (Amazon): amzn.to/3WYwGek
3D Models:
Do3D MK3 Helmet: bit.ly/do3dkersey
Filament:
3DFuel Pro PLA+: amzn.to/3jHC9HU
Resin:
Chitu Systems Conjure Rigid Resin: amzn.to/3WB1mSU
For Amazon Links: As an Amazon Associate I earn from qualifying purchases.
Other purchase links may also be affiliate links.
---------------------------------------------------------------
Music By:
00 : 00 Story Begins / HAMPUS NAESELIUS / www.epidemicsound.com/track/6...
03 : 26 Forsaken / UNDER EARTH / www.epidemicsound.com/track/o...
05 : 13 The Great Unknown / HAMPUS NAESELIUS / www.epidemicsound.com/track/y...
08 : 00 Full Momentum / CHRISTOFFER MOE DITLEVSEN / www.epidemicsound.com/track/W...
10 : 11 Up and Ahead / SVEN KARLSSON / www.epidemicsound.com/track/d...
11 : 29 Still Rivals / DREAM CAVE / www.epidemicsound.com/track/N...
13 : 16 Point of No Regrets / EOIN MANTELL / www.epidemicsound.com/track/t...
15 : 35 A Place Among the Stars / EDGAR HOPP / www.epidemicsound.com/track/C...
17 : 42 Grease Monkey / WILL HARRISON / www.epidemicsound.com/track/I...
20 : 30 My Great Undoing (Instrumental Version) / OF MEN AND WOLVES / www.epidemicsound.com/track/3...
22 : 23 Make Me Crash / ROCKIN' FOR DECADES / www.epidemicsound.com/track/I...
24 : 21 Marches / TIGERBLOOD JEWEL / www.epidemicsound.com/track/q...
27 : 06 Love Is Blind (Instrumental Version) / COMA SVENSSON / www.epidemicsound.com/track/k...
28 : 36 Rain Checking / OTE / www.epidemicsound.com/track/Q...
29 : 54 Up and Ahead / SVEN KARLSSON / www.epidemicsound.com/track/d...
31 : 54 Bring Them Home / HAMPUS NAESELIUS / www.epidemicsound.com/track/P...
33 : 26 Deadbeat / TIGERBLOOD JEWEL / www.epidemicsound.com/track/h...
All music courtesy of www.epidemicsound.com
@epidemicsound
---------------------------------------------------------------
Buy my t-shirt! amzn.to/3mlCj3F
You can support my work monthly (or yearly) on Patreon:
/ kerseyfabrications
You can support my work via one-time PayPal donations:
www.paypal.me/kerseyfabs
Where to find me on Social Media:
Facebook: / kerseyfabs
Instagram: / kerseyfabs
Twitter: / kerseyfabs
Contact: kris@kerseyfabrications.com
You can send me fan mail!
Kersey Fabrications
5885 Cumming Hwy
Suite 108-262
Sugar Hill, GA 30518
Privacy Policy: drive.google.com/file/d/1zEBG...
Terms of Service: drive.google.com/file/d/12SaT...
@kerseyfabs Жыл бұрын
Thank you to everyone for watching and taking the time to leave such kind words about the project! I'll have some more information on the channel very soon!
@brodiepasker9918 Жыл бұрын
To add vehical information you could possibly send the images to a database of cars and have it figure out what kind of car it is, it would be cool to have a version of ChatGPT and figure out a way to interact with the helmet controls in place of Jarvis, but great job thats looks so freaking cool
@dwaynmeyer4737 Жыл бұрын
I wonder if this would be possible in all metal with a possible suit
@kerseyfabs Жыл бұрын
I have an all metal helmet that I'll be working towards. 😉
@kerseyfabs Жыл бұрын
All in the works! Thanks!
@thejerryzeppshow6019 Жыл бұрын
this is really cool
@theHacksmith Жыл бұрын
This is awesome!!!
@kerseyfabs Жыл бұрын
Thank you for watching! It means a lot!
@TheMeditron Жыл бұрын
Something id expect from you guys. His build is dope being contained in the arc tho!
@lonewarrior6633 Жыл бұрын
Glad to see you about James!! Keep up the fight! You’re a winner!! You’re your own hero!!
@prousers_ Жыл бұрын
I bet you could do this Hacksmith
@fkj7761 Жыл бұрын
Hire him
@EmilyTheEngineer Жыл бұрын
A MAD MAN AT WORK. one of the coolest things I’ve seen 👏🏻
@kerseyfabs Жыл бұрын
Thanks Emily! I really appreciate it!
@CptObliviousness Жыл бұрын
Could you possibly put a small camera in the helmet to provide retina tracking so as to sync it up to the object detection? This should be an easy mod for you and it would add stability to the system in large open areas. Great video btw!!
@kerseyfabs Жыл бұрын
Yes! It's on my very long to do list! Thanks for the suggestion. Glad you enjoyed it!
@mrlately7253 Жыл бұрын
What is an example or use case, cool idea.
@maxlean6879 Жыл бұрын
It’d take too much memory to build a database of any possible object that object detection could lock on to. Maybe instead could pair it up to google images and maybe a simple AI like alexa to display relevant info
@Llamu Жыл бұрын
Yeah you could also lower the opacity and size of the UI elements and maybe lower the resolution of them then blur it so you don’t notice, so that you can see more, but when you look at one it will get bigger and come to full opacity. As another comment said you could use an AI such as GPT-3 and display relevant info of an object using Google. You could also add interactivity to the UI e.g have it so you can look at something and blink twice to select it. This could also allow you to easily toggle object detection on and off when you do/don’t need it which could help with performance. Another thing that could help with performance is using foveated rendering to lower the quality of the screen if it is in your peripheral vision, where it is already blurry to you.
@melody3741 Жыл бұрын
You mean iris detection????
@jakemeyer8188 Жыл бұрын
You do realize that you basically just made your own VR headset, right? Very awesome stuff. I had brain-built something like this, but wasn't able to put the time, money, or skill into it. You did a WAY better job than I could have, and not only am I impressed, but hugely thankful that you took this to stratospheric levels. I can't compliment you enough!
@kerseyfabs Жыл бұрын
Thanks Jake! I really appreciate the feedback. Yeah, it turned into a real VR/AR project and come March, it's going to get crazier!
@seanwarren9357 11 ай бұрын
Time and money are the worst. 😂
@caniputballsinyojaws 8 ай бұрын
well it would be AR
@graysonlorenz1441 7 ай бұрын
@@caniputballsinyojaws Which is so much cooler and more useful. There's so much cool software that can be added here like he said.
@FranklyBuilt Жыл бұрын
This is so freakin cool!!!!
@kerseyfabs Жыл бұрын
Thanks Frank!
@blobofblutack Жыл бұрын
This is great! I always felt like the Iron Man suit (at least early versions) did eye tracking to see where Tony was looking. If you could get that implemented then you could be more specific over object detection and potentially use it as a control interface. In fact, a button in the suit glove and eye tracking should be plenty to control it without having to hold that keypad up to your face.
@kerseyfabs Жыл бұрын
Thanks for the suggestion! It's on my list and I'll work on it in version 2 or 3.
@QuintinMassey Жыл бұрын
I would imagine you also want your “Jeeves” to provide you with queues on what you’re not currently looking at. That’s more proactive than reactive. IMO, getting stable and reliable output from the object detector is more important. Just my cents (by the way, what happened to the cents symbol on my phone keyboard).
@AnakinSkyobiliviator Жыл бұрын
Once in a while, youtube recommendations actually produce some gold. This is one of those times. Excellent build and I look forward to see further advancements and features to be incorporated into the design!
@kerseyfabs Жыл бұрын
Thank you so much! I'm glad you found the channel and enjoyed the content!
@rizalardiansyah4486 Жыл бұрын
The fact that you could fit all that inside the helmet is just crazy! That's so tight! And you even manage to not make the eye looks weird! This is next level
@kerseyfabs Жыл бұрын
Thank you! It seems everyone has different opinions about the eyes. For some people they stand out and for others they don't. I think it matter a lot how close you are.
@StormBurnX Жыл бұрын
@@kerseyfabs As someone who's in the process of converting a premade display prop Halo Spartan helmet into essentially this, fitting it all in has been hours and hours of dremelling and 3D printing adapter mounts/plates for everything. Definitely gonna take some notes from your work and see if i can revisit my internal layout !
@kerseyfabs Жыл бұрын
@@StormBurnX Awesome! Good luck with your build!
@woodwaker1 Жыл бұрын
Kris, I saw the time on this - over 30 minutes - at the end, I could not believe how fast it went, you did a fantastic job designing , building, programming and testing. This is a project you are justifiably proud of and will be fun to follow as it continues to develop
@kerseyfabs Жыл бұрын
Thank you David! That means a lot to me as a content creator! This was a labor of love.
@woodwaker1 Жыл бұрын
@@kerseyfabs I know 2022 has been a difficult year for you hope 2023 is better, this should attract many new viewers!
@alexanderatg6588 Жыл бұрын
i didnt even realize it was 30!
@kerseyfabs Жыл бұрын
@@alexanderatg6588 I really appreciate that!
@BlackGryph0n 8 ай бұрын
I’d LOVE to fly my paramotor while wearing that thing! (Or take you as a passenger)
@kerseyfabs 8 ай бұрын
Dude! That would be incredible! Would it be alright if I drop you an email?
@PCWizrdSolutions Жыл бұрын
Chris you should be so proud of your accomplishments! Thank you for sharing your experience and proving this is possible. I'm so inspired to do this with my builds now!
@kerseyfabs Жыл бұрын
Thank you so much! Keep reaching!
@ImageSC Жыл бұрын
I've got to say, that is absolutely amazing! From having a concept/idea to making it a reality. Keep wishing you the best in all your future endeavors and am glad I stuck with you since the beginning. I look foward to your future content, always have and always will. Laughed at the end when the kid said, ain't you suppose to be dead.
@kerseyfabs Жыл бұрын
Thank you so much! I appreciate your support and I'm glad you enjoyed it!
@my_feed_online3747 Жыл бұрын
Great job! For the lag :You can split the video with hardware right at the camera's output. From the split section you connect your video directly to the output mixer as background( hardware again). From the second split section you feed into your computer and retrieve only the interface. Project the interface on top by connecting to the output mixer. This will give you a live feed without lag. The only lag that can possibly exist, will be at the interface.
@kerseyfabs Жыл бұрын
There's only a 20ms lag plus this allows me to record what I'm seeing without any additional hardware. Thanks for the ideas!
@Akint Жыл бұрын
This is insanely amazing! Looking forward to the technical details of this incredible journey!
@kerseyfabs Жыл бұрын
Thanks Tony! Coming soon!
@artembagautdinov Жыл бұрын
That’s a masterpiece! I really enjoyed watching the entire process from the idea to the implementation! Keep it up!!
@kerseyfabs Жыл бұрын
Thanks! It was really a lot of fun to put it together. A very different process than my usual video.
@afkfelix Жыл бұрын
This is absolutely amazing! I never thought that something like this is even possible. Great job!!
@kerseyfabs Жыл бұрын
Thank you for that! Cheers!
@chinesischesser Жыл бұрын
This is by far the most impressive iron man helmet I've ever seen. You definitely need more views
@kerseyfabs Жыл бұрын
I appreciate the watch and comment! I'm trying to get the word out! 😀
@KristianGolding Жыл бұрын
I LOVE this. Awesome stuff, Kris!
@dreamerx23 Жыл бұрын
this project is gonna be INSANE! been wanting to see something like this for ages. thanks for taking the first steps!
@kerseyfabs Жыл бұрын
You bet! Thanks for following along!
@Cufc08 Жыл бұрын
Outstanding. If this is made available I’m 100% putting this in my helmet
@kerseyfabs Жыл бұрын
Awesome! I hope you do! I'm still working on the release.
@nigelfenlon9035 Жыл бұрын
Congratulations on the success of this build, I'm absolutely blown away by how awesome the helmet and the amount of tech you were able to squeeze into such a small space. I want one so much to add to my collection even it means more ear ache from the wife it would be so worth it big love from Ireland can't wait to see how your creation evolves
@kerseyfabs Жыл бұрын
Thanks a ton!
@Amor-Gabriel-Rodriguez Жыл бұрын
YESS this is what I always wanted to see. I've been looking for something like this for 4 months now!! RRespect cant wait to see the updates & Upgrades
@kerseyfabs Жыл бұрын
Thanks for watching! I really appreciate it!
@Braddeman Жыл бұрын
I can’t wait for you to release this so we can see what the community does with it! You are just one person that has come this far imagine what a whole community can do with your work as the base.
@itznash7779 Жыл бұрын
kzfaq.infoiqjbmHYmVuo?feature=share
@kerseyfabs Жыл бұрын
Thanks! I hope I get a lot of contributions to make it awesome!
@knightdaiguren3208 Жыл бұрын
Ive been wanting to do a gundam cosplay with a HUD system just like this. The fact that you will make this available for others to use actually motivates me to actually plan out doing this now rather than what my original plans were gonna be.
@mango305z Жыл бұрын
Yes please, ask him to do a collab
@kerseyfabs Жыл бұрын
I'm working on some of the details and new hardware now!
@knightdaiguren3208 Жыл бұрын
@@kerseyfabs thats exciting! will there be some sort of update video showing off any changes?
@kerseyfabs Жыл бұрын
@@knightdaiguren3208 Absolutely! More videos coming soon!
@WayneMachine 11 ай бұрын
A brilliant case for a motorcycle helmet when your hands are full. These helmets are the future. Great design.
@kerseyfabs 11 ай бұрын
Thank you! I've thought about making one. Should I work on it?
@WayneMachine 11 ай бұрын
@@kerseyfabs Ouu yee. Thats a great idea. This is where a helmet like this comes in handy. Maybe a project a bit like from the Street Hawk series or the RoboCop 2019 movie (badass helmet design). I'm a motorcyclist and 3D designer (also deals with 3D printing), I've often thought of a similar idea. HUD display in the helmet, and switches under the thumb at the handle - unless voice control, as in some intercoms. It's better to have a GPS notification on the helmet display than to poke around in the phone while driving. GPS gauges, message notification and maybe even readings from the machine itself; there is certainly something to put in such an interface, but the truth is that it must be quite minimalistic. What if Jarvis found a detour and said "Sir. I found a shorter way?" Cool thing.
@retro_boy_advance Жыл бұрын
That is so amazing and really shows how amazing and talented a real-life Tony Stark would be in figuring out how to fit all those electronics in such a small space and make it work wirelessly.
@kerseyfabs Жыл бұрын
Thanks! Yeah, he did a lot in a very short amount of time. Having the resources of a multi-billionaire helped too though.
@prodragonmaster3416 11 ай бұрын
Ive have been looking for something like this forever you explain like everything. Good job!
@KiwiKoNZ 8 ай бұрын
Brooo, this is dope! … I can’t wait to see the whole suite assembled 😎👍✨
@kerseyfabs 8 ай бұрын
Thank you! Helmet upgrade video coming very soon! With AI!
@KiwiKoNZ 8 ай бұрын
@@kerseyfabs Man I am sooo there! 💯👈🤩
@laikon101 Жыл бұрын
Wow, despite the external help you are the truly Tony Stark in real life.
@kerseyfabs Жыл бұрын
Thank you so much!
@sevequinn7070 Жыл бұрын
Wow! This build is amazing! I've been watching your videos for a long time. You helped me through some of my Ender 5 plus problems. This build and subject matter is mind blowing! please go deeper into this build it is very well done. Great job!!!!!
@kerseyfabs Жыл бұрын
Thanks Seve! I'm glad you enjoyed the new content. Thanks for watching and I'll have more soon!
@LightYTB Жыл бұрын
I think this is the best thing I've ever seen on KZfaq you're a fricking legend dude, I would love to see someone with the reactors attached to their hands, the full armor and your helmet this would be insane
@kerseyfabs Жыл бұрын
The repulsors for the hands are coming! Maybe not fully functional but I'm proud of how they look!
@AlliePaints Жыл бұрын
LET'S FUCCIN GOOOOOOO!!!! Just started planning a similar idea to this but more Cyberpunk inspired! You've done me an amazing service with this video sir.
@kerseyfabs Жыл бұрын
Thank you so much! Can't wait to see what you make!
@AlliePaints Жыл бұрын
@@kerseyfabs I’m going to start with getting the basics up and running, but I’d like to add IR optics as well! I was super impress with your video showcasing the new nano so I’ll probably use the new NX to see what kind of hardware encoding it can do. While im not *super* concerned about recording, it would be awesome to just have that extra headroom
@davideyres955 Жыл бұрын
This absolutely rocks. You should put the screen that shows what you are seeing on your back so when you are walking about people behind you can see that you’ve done an absolutely awesome job.
@kerseyfabs Жыл бұрын
I think it being on my back would take away from the cosplay a bit but I do have the one we can carry around.
@Socialbluebook Жыл бұрын
Incredible video, Kris! You're super knowledgeable and this was a treat to watch!
@kerseyfabs Жыл бұрын
Thanks! I really appreciate it! Thank you for your awesome community!
@carlpowers7291 5 ай бұрын
This is such an incredible project. I would like to see more like this.
@desertfox2000 Жыл бұрын
"Hey Ironman I thought you were dead?" Too soon. 😭😭😭😭
@kerseyfabs Жыл бұрын
I live! 😆😎
@camtron1967 Жыл бұрын
It is absolutely phenomenal. The only thing is the helmet sticks out from your face a little bit but that doesn’t detract from how amazing this is. Do you plan to make a full suit with this thing?
@kerseyfabs Жыл бұрын
Thanks and you're right on both counts. Yes, I'm currently working on the full suit with a lot of upgrades.
@camtron1967 Жыл бұрын
@@kerseyfabs that is awesome dude and I can’t wait to see it
@maxmustermann2459 Жыл бұрын
Amazing projects, and thank you for putting all the links to components in the description.
@kerseyfabs Жыл бұрын
Sure thing! Glad I could help!
@sfurtado3 9 ай бұрын
Such an AWESOME job!! Loved how you put this together!!
@kerseyfabs 8 ай бұрын
Thank you! Cheers!
@falkonfpv Жыл бұрын
Wow that was very cool, I look forward to following your progress with the helmet. Keep up the good work!
@kerseyfabs Жыл бұрын
Thanks! I appreciate it.
@3DHP Жыл бұрын
Thank you for sharing all your hard work going into this project.This is a Great new look and I look forward to seeing more.Thank you Kris.I will share this on my socials. Happy New Year.
@kerseyfabs Жыл бұрын
Happy New Year to you too! I appreciate it!
@QuintinMassey Жыл бұрын
2:40 lmao forgot about that part. There’s something so satisfying about watching 1) someone else work and 2) seeing an entire two years boiled down into a 30 minute video. Absolutely fantastic. I commend you on your efforts. I also realize, thanks to you, how much engineering you put into the (more than just a) helmet. I’m also amazed at the breadth of your skill level. Thanks for sharing this. I was particularly interested in how you developed the GUI, nice job J6. You guys killed it.
@kerseyfabs Жыл бұрын
Thanks for all the feedback! I'm glad you enjoyed the video. It may have been harder to produce than the helmet. 😆 Cheers!
@yuvallahav 6 ай бұрын
By far one of the best of its kind I saw... I'm just starting to dream to make my own helmet as well, although it won't be as complex as this one, still it will be lighted and motorized at least...
@Malomar100 Жыл бұрын
Wow, really impressing. Fantastic work.
@kerseyfabs Жыл бұрын
🙏 Thank you!
@crowandraven2133 Жыл бұрын
Soon everything will be upgraded and seamless, like the display being one screen vs two and higher memory running to help prevent crashes. This would be really fun to keep an eye on and see what you do for upgrades.
@darryljackman Жыл бұрын
Absolutely captivating!!
@kerseyfabs Жыл бұрын
I appreciate it!
@guillermorobledo2842 Жыл бұрын
Kudos, watching this totally got me pumped! Thanks for the inspiration.
@kerseyfabs Жыл бұрын
I'm happy I could do it!
@OnefinityCNC Жыл бұрын
This is CRAZY awesome! Great job!
@kerseyfabs Жыл бұрын
Thank you! Cheers!
@sternenkriegwerkstatt Жыл бұрын
Absolute amaizing, great job!
@kerseyfabs Жыл бұрын
Thank you so much! 👍
@Conbarr 2 ай бұрын
This is the coolest project I have ever seen! Definitely gonna try make that HUD one day!
@kerseyfabs 2 ай бұрын
Thanks! I can't wait for others to start to recreate this! My source code is coming soon!
@markojavorac9117 Жыл бұрын
This is incredible! Thank you so much for sharing your journey 🎉
@kerseyfabs Жыл бұрын
Thanks for watching!
@merhenderg8974 Жыл бұрын
Amazing stuff, can’t wait to see how this project progress!
@kerseyfabs Жыл бұрын
Thanks! I'll have more up soon!
@anands6127 Жыл бұрын
Fabulous,so much effort and took so much time.Really awesome 👍
@kerseyfabs Жыл бұрын
Thanks!
@holywaffles1974 Жыл бұрын
That was amazing, look forward to more of your work!
@kerseyfabs Жыл бұрын
Thank you so much! 🔥
@Entertainment-pw4xe Жыл бұрын
Whoa! Amazing. A rear view camera and a speaker for vocal projection would be dope..
@kerseyfabs Жыл бұрын
All in due time... Thanks!
@UnwellGaming Жыл бұрын
That ui tech would be amazing for motor bike helmets to use . that way they can get all the info from the bike dash sent over local Wi-Fi/Bluetooth to their headset like their speed temps fuel amount and if any error show up as well as blinker alerts.
@kerseyfabs Жыл бұрын
Yeah! I've though a lot about using the UI in cars or motorcycle helmets.
@jesseandreasen5318 Жыл бұрын
This is so awesome! Now I'm looking at my Ender 5 Plus and getting ideas. LOL Adding basic voice recognition commands with the object recognition tied into servo-based shoulder and forearm weapon deployments would be really cool. Tie it into Bluetooth from your phone for communications with PIP in the HUD of who you're talking to. Probably would mean a beefier board and CPU mounted in the chest piece. The possibilities are endless! Awesome work so far. Can't wait to see what you do in the future.
@kerseyfabs Жыл бұрын
Let's just say that you're thinking like me! Some of this is definitely in the future!
@buildersmark Жыл бұрын
Awesome! Gotta finish out the whole suit
@kerseyfabs Жыл бұрын
By September. Dragon Con. 🐲
@MrStanFungi Жыл бұрын
me from 2 years ago would be fainting from excitement. I was at the height of my Iron man phase. Now, I my interest in Iron man is resurfacing. I've always thought a helmet with a HUD would be the coolest thing, and it's so cool to see you just completely going for it, and making it as close as possible to the movies
@kerseyfabs Жыл бұрын
Thank you! I never lost sight of the dream. I really wanted to take what Hacksmith did to the next level. It just took some time. There's more to do still!
@MrStanFungi Жыл бұрын
@@kerseyfabs I love that a lot of the things from the movies are possible in real life, as long as you have the right components
@nejakejatom Жыл бұрын
This is awesome. I look forward to implementing this in my droid in the future.
@kerseyfabs Жыл бұрын
Fantastic! That sounds great!
@ConsultingjoeOnline Жыл бұрын
Looks great. Amazing work!
@kerseyfabs Жыл бұрын
Thank you! Cheers!
@kaitheraccoon20 Жыл бұрын
I have no words for how amazing this is! just a round of applause for you and your amazing hard work!
@kerseyfabs Жыл бұрын
Thank you a ton! I appreciate the comments!
@GamesPlayedBadly Жыл бұрын
Amazing job, this is really advanced stuff! Thanks for sharing and in such detail, I really enjoyed it!
@kerseyfabs Жыл бұрын
Thanks! Subscribe to follow the series as I keep adding new components and tech!
@dfrost666 Жыл бұрын
This is SO amazing! Congratulations on bringing an awesome project to life!
@kerseyfabs Жыл бұрын
Thank you!
@mylittleparody2277 Жыл бұрын
Thanks a lot for sharing this awesome work!
@kerseyfabs Жыл бұрын
My pleasure! Glad you liked it!
@prince3121 Жыл бұрын
Amazing work. You had a vision and implemented it brilliantly!! 👏
@kerseyfabs Жыл бұрын
Thank you so much 😀
@93gustavsson Жыл бұрын
Hey, love the vidios and what you are showin whats posibol. Am new to all Raspberry and Arduino=) Am looking into building one for my self but with IR cameras is it a big difference compared to normal cameras?
@jesseskellington9427 Жыл бұрын
13:10 Thanks so much for showing your failures and how you learn from them. I really appreciate 😊😅
@kerseyfabs Жыл бұрын
No problem! It's all part of the process!
@tsstn Жыл бұрын
You have certainly done a lot of heavy lifting on the way to a real useful AR . I love that you focused on the practical application of existing and emerging technology. I have had an idea for some time now that would run parallel to your project . If I can make some headway, I would love to share it with you. Meanwhile, thanks for shooting this and taking all the time to get it out to us. I know it is not as easy as breathing. In fact there is a ton of work that clearly went in to all of this. I am impressed.
@kerseyfabs Жыл бұрын
Thanks! It's been a fantastic project and I've been very pleased with the response.
@mr702s Жыл бұрын
This was recommended to me today, subbed, great work!!
@kerseyfabs Жыл бұрын
Thanks for subbing!
@tljstewart Жыл бұрын
This is so cool! As a fellow SWE I would love to see more of the software side, all of it! Especially the gstreamer and Ui elements! Such an inspiration, thanks!
@kerseyfabs Жыл бұрын
Good to hear from you Tim(othy)! I'm working on a complete open source release and I get closer all the time. Keep an eye out on this channel for more information.
@darkmac05 Жыл бұрын
What a project! i'm speechless.
@kerseyfabs Жыл бұрын
Thank you! 😎
@robenc9549 Жыл бұрын
Amazing, blown away .
@kerseyfabs Жыл бұрын
Thank you! 🔥
@barlowanimations1517 Жыл бұрын
This is such a crazy cool project! I can't wait to see the future of Iron Man suits.
@kerseyfabs Жыл бұрын
Thanks! Keep watching!
@abhinavprasanth6883 Жыл бұрын
im blown away! this is truly magical.. great work!! i never thought i could see smthn like this you really deserve a lot more attention. and is there a way to like join those 2 cams like how our eyes work? cuz now both displays show the same thing.. this thing is really incredible and im sure you're gonna keep on making this better and i wish you all the best with it!!
@kerseyfabs Жыл бұрын
Thank you! The displays are not identical. They are offset by a few inches. You can see the cameras on the front of the helmet. This does give you 3D vision.
@abhinavprasanth6883 Жыл бұрын
@@kerseyfabs wow i never thought would get a reply from you.. thank you sm! YK the GPS and other info is seen on both the screens which makes it feel like its mirrored.. in my opinion removing the GPS from left and battery stuff from the left side and removing the side compass and the blue box from right and making the top compass into one could make it look more real.. just my opinion i mean this is so cool as it is and implementing more stuff into it can make it so much more cool!
@tamn3 7 ай бұрын
That is some awesome engineering in both hardware and software
@kerseyfabs 7 ай бұрын
Thank you!
@valshaped Жыл бұрын
Jetson Nano-Half the power of the Nintendo Switch, in the palm of your hand! Now, the Xavier NX, on the other hand, is kinda nuts.
@kerseyfabs Жыл бұрын
Yeah, the Nano was great for experimenting but not enough memory for much else. The Xavier is a lot better and I can't wait to get my hands on an Odin!
@EverlastingEclipses Жыл бұрын
the fact that more people trying to approach utilitarian perspective where it "actually" works. and not just gimmick is what's going to advance human technology to next level. Keep up the work my sir!
@kerseyfabs Жыл бұрын
Thank you! Making it work for real is the best part! Gimmicks are fun and all but seeing it do what it was meant to do real time is so cool!
@Mitsuolevel Жыл бұрын
This really helps for my microbinoculars for my phase 2 clone helmet, which will show the info that starwars legend say the helmet has
@kerseyfabs Жыл бұрын
Sounds like a cool project!
@kerrsjunk Жыл бұрын
Dude you're an inspiration. I've been wanting to learn how to make a HUD but for a car dash. I got hung up with the programming.
@kerseyfabs Жыл бұрын
I appreciate it! I hope this code helps once I release it.
@kerrsjunk Жыл бұрын
@@kerseyfabs Sweet! I have some new almost silly stuff I want to do with a dash screen and HUD
@memerboi8532 Жыл бұрын
YES YES YES SOMEONE FINALLY DID IT!!!!! AWSOME WORK DUDE!
@kerseyfabs Жыл бұрын
Dude! I appreciate it!
@GRaVITY2DX Жыл бұрын
As many super hero (Iron Man/Spider man) video projects I have seen, this one is by far the best and most interesting one I have watched to this day. I have no clue how to build such things so watching someone else do it brings me much happiness. Good job. I will be watching.
@kerseyfabs Жыл бұрын
Wow, thank you! I'm glad you enjoyed it!
@NiallEveritt 6 ай бұрын
I’m in awe of your skills mate. This is so so so so soooo cold. Well done.
@MrTheCamel Жыл бұрын
that is cool. great engineering and execution
@kerseyfabs Жыл бұрын
Thank you! 🤖
@SomeD00D01 Жыл бұрын
Wow a actually confident and somewhat functional helmet that isn't just a shell servos and some lights
@kerseyfabs Жыл бұрын
That's the idea! More tech coming!
@drewknight91 Жыл бұрын
You did it, you did it! In theory with the field of vision you now have you should be able to walk around with the helmet without problems, the only additions you could make are microphones on the sides to hear well since the helmet encapsulates your head and cutting the sounds, then if you want you could insert a microphone and a speaker to make your voice heard and add effects if you want. I too have the dream of realizing this project, to save space horizontally in the helmet, I had thought of positioning the screens at the bottom of the mask pointing upwards with the lens above, then positioning two mirrors in front of the eyes at an angle of 45 ° so that they reflect the images of the screens, if desired the mirrors could be rotated so that when the system is off you can still see through the slots on the mask. As for additional information, you could insert a function that tracks where you are looking and then provides you with the data and information without filling your field of view too much Think with the technology of next generation viewers how compact all this can be, the only difficulty will be hiding the cameras.
@kerseyfabs Жыл бұрын
Sorry for taking so long to reply Drew but you had a very thoughtful comment and I wanted to reply to your thoughts! The microphones and speakers were ideas I've had and I may implement them relatively soon. The mirror idea is interesting but I'm not 100% sure how it could save space. I'll do some research/thinking on it. Eye tracking is on my wish list but it requires additional cameras. Hiding the cameras is a work in progress. Thanks again for the feedback!
@francescof.3317 10 ай бұрын
No words, thank you for your development time 👍👍👍👍
@kerseyfabs 10 ай бұрын
Thank you! More coming very soon!
@_Scxrpixn_ Жыл бұрын
Yo! That’s a sick Cad Bane sculpture at the back! I just got recommended to watch this and damn this is freaking awesome! Only 10 mins in the video and I’m definitely gonna watch more of your videos. I liked and subbed! 🤙
@JG-gx3ke Жыл бұрын
Amazing, absolutely amazing! This blew my mind.
@kerseyfabs Жыл бұрын
Glad you enjoyed it!
@Behemuth3 7 ай бұрын
I Loved every minute of this video. Well Done! That was truely inspirational.
@kerseyfabs 7 ай бұрын
Glad you enjoyed it! I really appreciate the comment!
@agepbiz Жыл бұрын
Impressive project! Love it!
@kerseyfabs Жыл бұрын
Thank you! Cheers!
@sharadkumarpandey6656 Жыл бұрын
Man it's like seriously marvellous move ... People can't even easily fit something in that shape but you did and made world's first real iron man helmet
@kerseyfabs Жыл бұрын
Thank you so much! Cheers!
@arshbajrang2380 Жыл бұрын
Crazy work of art mann appreciate it bro
@kerseyfabs Жыл бұрын
No problem! Thanks!
@raythareiz6609 3 ай бұрын
Great idea and invention. Glad to see the implementation of AR in this!
@kerseyfabs 3 ай бұрын
More to come! Thanks! I want to do a lot more with the AR!
@spankdag2948 Жыл бұрын
super hard work dude! Loved every minute of it. I have a hardware project as well and I got motivated xD
@kerseyfabs Жыл бұрын
Awesome! Thank you! I'm glad to hear it!
@omaior20 Жыл бұрын
Great video, a lot of love and hard work was put into it and it shows!
@kerseyfabs Жыл бұрын
Thank you! I'm glad it showed through.
Жыл бұрын
That´s how it starts. Just as a lot of tech we have today were inspired by Star Trek, imagine 40 years from now. An you are already there. I hope I live this long to see it.
@kerseyfabs Жыл бұрын
Yep! Looking to SciFi is a great source of inspiration!
@flipperkast8929 Жыл бұрын
Kris, This is truly amazing! I’m very impressed!
@kerseyfabs Жыл бұрын
Thank you! I'm glad you enjoyed it!
@mango305z Жыл бұрын
Two years hard work!!?? Mad respect for your dedication and hard work! It looks awesome! Keep going!
@kerseyfabs Жыл бұрын
Thank you! Will do!
HEN3DRIK - Electroplating 3D Prints
Рет қаралды 456 М.
Myphoneacc
Рет қаралды 12 МЛН