In this short video, I 3D print and demonstrate my clutch pack
Пікірлер: 52
@bytesandbikes2 жыл бұрын
well, bike clutches are paper, so should be fine :-) Plus more spring force makes a huge difference
@CamdenBowen2 жыл бұрын
If I make a new one to mate to an engine or so, I'll definitely use more springs and see if that helps from slipping
@HergerTheJoyous Жыл бұрын
Now, to be able to design a clutch to make a go cart from an old lawnmower engine would be cool if it would last more than once around the track.
@CamdenBowen Жыл бұрын
I was thinking of putting it onto something eventually
@hulksmashnoobsgotit2387 Жыл бұрын
i have a centrifugal clutch gokart, and its the most common type of gokart clutch behind the CVT.
@joey_f4ke238 Жыл бұрын
Unless it's slipping like crazy it should hold just fine, no slip would mean no heat or wear
@Wimmsi Жыл бұрын
@@CamdenBoweni think its gonna melt away
@floridamangonwild2 жыл бұрын
Wow someone actually did it, id like to see this attached to a gearbox with 5 gears or so and a toyan engine!
@CamdenBowen2 жыл бұрын
Me too! I think it could be possible!
@floridamangonwild2 жыл бұрын
@@CamdenBowen im kinda wondering how the gearbox would hold up or if you would have to use metal
@tmn28132 жыл бұрын
@@floridamangonwild rc test flight and Edward page both have videos on the topic of 3d printed gear longevity and high speed testing
@floridamangonwild2 жыл бұрын
@@tmn2813 with an actual combustion engine tho? Ive seen theyr videos
@tmn28132 жыл бұрын
@@floridamangonwild no one has done it with a internal combustion engine to my knowledge. Nitro Rc cars RPM in the range of 25,000-37,000 Edward page tested straight cut Unlubricated gears to nearly 40,000 before it exploded. so I don’t see why it couldn’t be done.
@DatBlueHusky2 жыл бұрын
i think you should run fluid in there because it wont be long before it all melts together
@marcusthegamer3482 жыл бұрын
When he said "yeehaww" I felt that
@waghak272 жыл бұрын
I have a suggestion could make a video about how the liquid rotary engine works and where the air goes
@sagenbabin87868 ай бұрын
Man whipped out a klx 140 with missing plastics Based
@CamdenBowen8 ай бұрын
In truth I got it with plastics, but I couldn't get them to fit back on after taking them off so I could fix it ahah
@sagenbabin87868 ай бұрын
@@CamdenBowen dude I had the same problem with my brothers 140 but such a great bike always starts
@christophercain7343 Жыл бұрын
Try destruction testing it! Put the clutch in the vice, hook the shaft to a drill, and go until it melts
@CamdenBowen Жыл бұрын
Really good Idea actually! it's been collecting dust this whole time anyway...
@christophercain7343 Жыл бұрын
@@CamdenBowen really looking forward to this, I’d imagine the video would have the potential to do rather well because people like seeing shit break lol
@CamdenBowen Жыл бұрын
@@christophercain7343Update: Just finished smoking it off lmao, I'm finishing it up now
@stephenhumble7627 Жыл бұрын
I suspect the surfaces will partially melt then start gluing together before being completely torn apart. Is there some way it may be improved by using inserts of a more durable material without making it too hard to manufacture.
@Salviasmoker Жыл бұрын
@@CamdenBowen what happened to the video of you doing it?
@RonPaul2008201210 ай бұрын
It would pair well with fluid coupling and if the clutch was operated hydraulically by a pump and a valve body.
@your_fbi_agent311 Жыл бұрын
I could have swore you made a video on like destroying it. I'm thinking KZfaq removed it.
@CamdenBowen Жыл бұрын
I actually unlisted it, I didn't think the video was very good but I'm thinking of adding it to a playlist of unlisted stuff
@roberthawthorne1478 ай бұрын
Ive been trying to prototype a small clutch for RC vehicles for awhile. I started pouring silicone molds in order to make resin/sand composites for thd clutch pads, it all failed. Im going to try your hotglue method.
@peter360adventures911 ай бұрын
Motorcycle has a wet multi plate clutch with friction plates and slipper plates the springs are mounted on the basket of plates. But Awesome.
@jeromerox999911 ай бұрын
Nah, my ducati has a dry clutch.
@peter360adventures911 ай бұрын
@@jeromerox9999 And it was noisy too.
@frzzzdtm Жыл бұрын
finally someone actually did this
@CamdenBowen Жыл бұрын
It was one of those projects that's been on my mind for a while lol
@nejnej4676 Жыл бұрын
I like your videos, they are creative.
@stefanguiton Жыл бұрын
Great video!
@YourLocalRailfan6 ай бұрын
3d printed clutch out out of entirely 3d printed parts
@piousminion782211 ай бұрын
My prediction before the end of the video is that the friction will slip and you'll smell a lot of burning plastic.
@jackomix2 жыл бұрын
but will this stop any, hypothetically, gamma ray tanks? 🙂
@CamdenBowen2 жыл бұрын
Facts Jacob mix
@Earth_Elemental2 жыл бұрын
LETS GO
@rickster588 ай бұрын
The hot glue is going to melt
@swliwii21982 жыл бұрын
Where's the 4s engine?
@CamdenBowen2 жыл бұрын
Still in the works, I decided to make a new project in between