Mini Mortising Jig for LOOSE TENON Joinery! No Domino required! You can even use your trim router!

Рет қаралды 1,023,658

Күн бұрын

Thanks Hello Fresh for sponsoring this video! Use code 3X3CUSTOM12 to get up to 12 FREE MEALS across your first 4 HelloFresh boxes, including free shipping on your first box at bit.ly/3cBkY3N
Get the plans here - www.3x3custom.com/store/mini-...
For more details, check out the full written article - www.3x3custom.com/tutorials/m...
Router Edge Guide video - • Easy and Accurate Rout...
As mentioned in the video, I did not come up with the final design for this jig, Mike from TayTools did! If you like the jig and want to support his awesome idea, consider purchasing the parts through his website below!
*links below are affiliate links
____
PARTS FOR THE JIG
Dovetail Track Nuts:
lddy.no/w060
Dovetail Track Hardware with Knobs:
lddy.no/w061
12" Threaded Rod:
lddy.no/w062
Thread Locker:
lddy.no/w063
1" Long 1/4-20 Flat Head Machine Screws:
amzn.to/3vEvnEo
1/4-20 Knobs:
lddy.no/w066
Dovetail Clamps:
lddy.no/w064
Threaded Inserts (for optional attachment):
lddy.no/w067
Knobs with Stud (for optional attachment):
lddy.no/w06j
More Affordable Knobs with Studs:
lddy.no/w06k
TO USE THE JIG
Trim Router:
amzn.to/3qTkhry
Guide Bushing Adapter:
amzn.to/30Sw6DK
Short Shank 5/8 Guide Bushing (The short shank is key here...):
amzn.to/30XHm1y
Metric Upcut Spiral Router Bits:
lddy.no/w05w
Pre-made Loose Tenons:
lddy.no/w05x
Imperial Upcut Bits if you want to make your own Loose Tenons:
lddy.no/w05v
Brass Set Up Bars:
lddy.no/w069
TO MAKE THE JIG
Dovetail Bit from Microjig:
lddy.no/w06a
Middle of the Road Dovetail Bit (1/4" Shank):
lddy.no/w06c
Most Affordable Dovetail Bit:
lddy.no/w06f
Awesome Brad Point Bits:
lddy.no/w05u
Countersink Bit (seriously the best one I have ever used):
lddy.no/w06i
Marking Knife:
lddy.no/sn6i
Wheel Marking Guage:
lddy.no/w06q
Calipers:
lddy.no/w06t
Center Finding Ruler:
lddy.no/w06v
Push Blocks:
amzn.to/3qpWNv2
Chisels:
bit.ly/WoodriverChisels
____
My Amazon Store - amzn.to/2uRpplb
_____
My Recording Equipment
Camera:
amzn.to/2scO0mu
Shotgun Mic:
amzn.to/2rp1ETp
Lav Mic:
amzn.to/34r7Ico
Voiceover Mic:
amzn.to/2rs9TOx
___
FOLLOW
Website - www.3x3custom.com
Subscribe - / @3x3customtamar
Instagram - / 3x3custom
Facebook - / 3by3custom
_____
0:00 Intro
0:55 What is a Guide Bushing?
2:07 Making the Platform PART 1
5:38 Making the Fence
7:53 Making the Platform PART 2
9:49 Final Steps on the Fence
11:10 Thanks Hello Fresh!
12:51 Optional Attachment
13:33 Ready to Assemble!
14:14 Setting the OFFSET
15:58 Setting the WIDTH
18:29 Setting the DEPTH
19:35 How to use it!
23:51 Outro
Links above are affiliate links, I make a small commission if you click on them at no extra cost to you. clicking on them really helps me continue to make more projects :)

Пікірлер: 1 600

@MikeTaylorToolworks 3 жыл бұрын

Super nice job!! So clear and concise. Much better than I could ever do. You got my manual down to no more the 87 pages. Haha

@3x3CustomTamar 3 жыл бұрын

😂😂😂 this jig is really so brilliant! Thanks for letting me share it!

@ilikewaffles3689 3 жыл бұрын

Bro are you the owner of taytools? 😳

@chrispatterson7640 3 жыл бұрын

Awesome. I placed an order with Taytools earlier today.

@802Leith 3 жыл бұрын

Mike, where is the 3x3 jig bundle on your site? With the promo code spif for Tamara? Build that list kids

@pip5461 2 жыл бұрын

@@ilikewaffles3689 Yes...

@johnjensen5540 Жыл бұрын

Rewatched after 2 years. Still learning new things. She's brilliant.

@davidmeyer9204 3 жыл бұрын

Thank you again for a "useful" jig. About your calipers, they are just loved! You keep raising the bar and you do it with such grace. Thanks again for taking the time to show us how to make ourselves and projects better.

@3x3CustomTamar 3 жыл бұрын

Haha glad you liked it!

@willjosephson 3 жыл бұрын

You have a real gift for making things easy to understand. The way you combine that with woodworking skills is amazing. Thanks for this!

@3x3CustomTamar 3 жыл бұрын

So awesome to hear! Thanks!

@tree_carcass_mangler 3 жыл бұрын

@@3x3CustomTamar I agree with Will Josephson!

@jeremyspecce 3 жыл бұрын

For something with so much detail, it really does break it down to easy to understand steps. I don’t know if it would help or not but I feel like maybe it would make more sense to see how the jig is used prior to the assembly, like I was confused as to what all the grooves were for until the end when I saw it used. Now that I’ve seen it in use it makes much more sense. Obviously people will have watched the video before trying make the jig so maybe my comment is pointless. 🥺

@823Steve 3 жыл бұрын

@@jeremyspecce I agree. I've watched so many videos and couldn't figure out what they were doing or why. It would help immensely.

@doodad1618 3 жыл бұрын

I just want to say, your jig videos are some of my favorites! They're so informative and accessible! It makes a newbie like me feel like I can actually do some cool stuff in my limited shop.

@3x3CustomTamar 3 жыл бұрын

So awesome to hear! Thanks!

@GyWO10 3 жыл бұрын

I absolutely love your instructional videos! You’re super amazing at breaking concepts down for the most novice woodworker to understand!! Keep making great content like this!!! 👏🏽🙏🏽🪚🔨

@3x3CustomTamar 3 жыл бұрын

So glad you like it!

@smp301 3 жыл бұрын

This is without doubt my favourite you tube channel, your talent is amazing Cheers from Australia 👍🏼

@3x3CustomTamar 3 жыл бұрын

So awesome to hear! Have a great weekend!

@jasonsiebold 2 жыл бұрын

I have to say you have become one of my favorite follows on KZfaq. You are such a good teacher. Kudos.

@pemtax557 2 жыл бұрын

What a wonderful video ... you make a project like this so clear and concise that I even got it. You truly are a treasure to the community. Thanks and good luck on your move.

@golfer0197 3 жыл бұрын

I think it's great that you do real, fine woodworking and make alternative tool recommendations whenever possible. You are the most helpful woodworker on KZfaq!

@3x3CustomTamar 3 жыл бұрын

So awesome to hear! Thanks!

@stuartclark5255 3 жыл бұрын

When Tamar says "Let's see how it all fits together" there is literally zero suspense... we all know it's going to be extremely precise and look perfect. Great video!

@3x3CustomTamar 3 жыл бұрын

Hahha 👍👍

@Tensquaremetreworkshop 3 жыл бұрын

Yep- no-one shows the failures...

@dennisfahlstrom7175 3 жыл бұрын

@@Tensquaremetreworkshop not true with Tamar. Check out her roll up chair project.

@isaksaha9377 2 жыл бұрын

Done#naseebsales

@woodworkingandepoxy643 Жыл бұрын

@@Tensquaremetreworkshop Tamar and rag n bone brown are the only ones I've seen that always show failures

@mindyhall4638 3 жыл бұрын

Honestly, so talented; so helpful; so straightforward; so enjoyable! Thank you for all the great content!

@3x3CustomTamar 3 жыл бұрын

So glad you like it ☺️☺️🤘

@johnspisak9729 Жыл бұрын

Awesome video from the most awesome multitasker ever. Mom and woodworker. How you do it is amazing and inspirational.

@nathanielsinnott7783 2 жыл бұрын

Tamar! I'm a very big fan. I'm a university professor and weekend woodworker. Let me tell you: You are a naturally great teacher! I watch a lot of woodworking videos and coming back to one of your videos after watching some others is a like a pressure valve being released in my brain. You're so clear and concise. Thank you for what you do. One question/comment: I was surprised that you didn't have a zero clearance insert in your table saw. Any reason?

@jonathanbrowne8884 3 жыл бұрын

Since I'm a Newby to woodworking, this is a little out of my league still, but I've saved it because I know this will absolutely be helpful to me in the future! You make things look so easy, and your explanations are so clear, I can understand them! That says a lot! Luv this channel! Cheers!

@3x3CustomTamar 3 жыл бұрын

So awesome to hear!

@alanr745 3 жыл бұрын

I built the Morley Mortiser a few years ago for a bed I made. The portability of this design is definitely going to make it a great addition to my shop. Thanks Tamar!

@3x3CustomTamar 3 жыл бұрын

Awesome

@jakobrosenqvist4691 3 жыл бұрын

Honestly, I think all your little riggs and jiggs are the most interesting thing you make.

@johnrobinson1020 Жыл бұрын

You can make the loose tenon bits easily by creating the tenon firstly in one long length by sizing a length of timber to the correct dimensions of the mortice; for instance 45mm wide by 8mm thick, this can be any length depending on how many tenons you may need. All you need to do is round over the 4 edges for the full length of the timber using a 6mm round-over bit (raise the bit just enough above the router table-top to create a shallow round-over edge that will fit the mortices round edges. All you need to do then is cut the tenons into the length you need them to be for the mortice. Rounding over the edges of the timber can also be achieved using a hand-held router or small plane. I thought I would mention this as I had visions of some beginners making their tenons one by one. Very good video by the way.

@andrhamm 3 жыл бұрын

omg i'm not the only person that breaks into the pearl jam song whenever i am looking for literally anything lol... i haven't even heard that song since like the 90s and yet i think about it all the time 😂

@3x3CustomTamar 3 жыл бұрын

Oh where oh where did I put the salt? 🎶 it goes with everything.... ha

@paulvolkmann2979 3 жыл бұрын

It’s actually a song that was a hit in 1964 for The Cavaliers (a previous recording was on Tamara Records) which was a cover as the original recording was Wayne Cochran in 1961

@kerryhawkins4255 3 жыл бұрын

I have seen several mortising jigs in magazines and books, but yours is the simplest and most clearly explained which makes it easier to build. Keep up the good work!

@3x3CustomTamar 3 жыл бұрын

Awesome to hear!

@DaveJHarry 3 жыл бұрын

This is genius. I was really confused at first, then it all came together and made sense when you used it. Your creativity - in this case, creative adaption - is why your channel is one of my favourites for woodworking.

@3x3CustomTamar 3 жыл бұрын

So awesome to hear!

@vinceagnes 2 жыл бұрын

You are a great teacher! This fixture sure beats spending $1000- $1500 for a domino joiner, especially for a home hobbyist. There are times when I feel that making jigs and fixtures are even more fun to make than the furniture. Very nice job & filming.

@3x3CustomTamar 2 жыл бұрын

Haha I hear that!

@davidgalindo5964 3 жыл бұрын

American here, living in Spain. Love your videos! But you had me going crazy with all the imperial measurements to then find out the loose tenons are in metric! 😆😅 I’ve been converted to metric every since living here, so much easier to calculate on the fly.

@youtukang 2 жыл бұрын

👏👏😅

@JesemanuelRamirez 2 жыл бұрын

Totally agree. I live in the Caribbean and we also use imperial, but I’ve since switched to metric and my cabinet designs have been super accurate

@RobertSchwingerT Жыл бұрын

I have been living in Asia for ten years now and I still have to have two sets of measurements for every project plan I get from the US.

@theclosetcarpenter7172 3 жыл бұрын

I gotta say, I like how real you are. You're not afraid to show you make mistakes sometimes. Really love your channel

@3x3CustomTamar 3 жыл бұрын

Awesome to hear! Thanks!

@freddiedoyle472 2 жыл бұрын

It goes with out say your wood working skills are outstanding , I wanted to compliment you on the Segway to the hello fresh advertisement portion. It's seamless and very well done over all . Thanks for running such a great channel !

@3x3CustomTamar 2 жыл бұрын

Haha thanks so much!

@rogerkant3696 Жыл бұрын

For those of us in the metric world the challenge is getting 10-32 threaded rod which is simply not easily available. The answer I came up with was to use a M6 drill/thread bit. All these fittings have a brass bushing and since M6 is just a little larger than the nearest metric size to 10-32, M5, then drill out and tap the slides and knobs with the M6 bit and replace the 10-32 rod with M6 threaded rod and the problem is solved and you can still use the Matchfit or Microjig hardware.

@jimallen8238 3 жыл бұрын

Wow. Tamar is so gifted - both at figuring things out and explaining it to others. Really inspires me to try some small projects on my own. I could really see her with her own show on PBS.

@3x3CustomTamar 3 жыл бұрын

Ha! Awesome to hear!

@igelkott255 3 жыл бұрын

This is a really cool idea, and thanks for the very clear explanation. I was looking through your links and realized that I could easily print all the knobs and dovetail nuts I would ever need. All I need to do is pick up a boatload of heat set inserts. Thanks for the inspiration!

@3x3CustomTamar 3 жыл бұрын

Glad you liked it!

@humancattoy7767 3 жыл бұрын

I hope you bought Mike a brew and shared a laugh with him. This is a great idea.

@3x3CustomTamar 3 жыл бұрын

😂😂 i was coming up with something so similar. But it didn’t involve the built in dovetail tracks. I thought that idea was so cool

@josephKEOarthur 3 жыл бұрын

yep Mike is awesome!

@alanhill6974 3 жыл бұрын

@ 7:49 - the walnut piece looks like a huge slab of chocolate, best jig ever :-) Great work and great video yet again

@3x3CustomTamar 3 жыл бұрын

Hahah it does look pretty good 😂 glad you like it!

@dannmarks 2 жыл бұрын

You are fun to watch. Making your own tenons- Use your router table and round the corners on pre-dimensioned stock . Cut to desired length and this is a good use for scrap stock. And yes your detailed delivery is a joy to listen to. Your accent is a hoot as well.

@blaizewood1871 2 жыл бұрын

A great teacher, a superior carpenter and an amazing KZfaqr. Truly rare quality. Grateful and in awe. Thanks a bunch.!👌❤️🤩

@3x3CustomTamar 2 жыл бұрын

☺️

@alexclark6777 3 жыл бұрын

Fantastic! I love that the fence itself is designed to be removable as it really broadens the possibilities. I love the Matchfit stuff but boy does it get pricey, so I wonder - could this be made with T-track, or alternatively just a T-slot bit, and some hold-down clamps attached to T-bolts?

@3x3CustomTamar 3 жыл бұрын

My design was to use t track. Then Mike sent me this version and I thought it was so smart to have it all built it. But yes. There’s always another way!

@dreid477 2 жыл бұрын

i was thinking i might make the dovetail nuts out of some hardwood scraps with threaded inserts. then all you need is the dovetail bit (and the dovetail clamps, i suppose)

@mightypolo2010 Жыл бұрын

I am playing with that right now and I realized, that if I use dovetail bit and make two or three passes 1mm or 2mm deeper every time, I then can use clamp from my plunge saw track. Iam using this on several jigs.

@billbyrd9845 2 жыл бұрын

Great video, great craftsmanship! But broadside routering at 7:11 really scares me. My technique is to tape a sacrificial board (to the workpiece) wide enough to change the ratio of width to length, then push it through. Simultaneously prevents tear-out.

@youtukang 2 жыл бұрын

👏👏👏

@edwardcullen606 3 жыл бұрын

I'm going to say it again, you keep inspiring me in so many ways. Thank you.

@3x3CustomTamar 3 жыл бұрын

Awesome to hear!

@GlennHalfpap 2 жыл бұрын

I’m just getting around to building this after buying the planes. I’ve learned a lot from your channel. Great build so far. Thanks!

@reframeyourbody 3 жыл бұрын

Thank you for recognising the pain of metric people :p Another amazing video and resource, thank for making it!

@3x3CustomTamar 3 жыл бұрын

Hahaha I feel your pain when someone starts shouting mm to me 😂

@felixreali7101 3 жыл бұрын

@@3x3CustomTamar 🤣

@bobbg9041 3 жыл бұрын

Lol pain of metric people. You guy just can't deal with fractions. 3mm plus 4mm. 7mm 3/8 plus 3/4. Fast off the top of your head whats that?

@TKevinBlanc 3 жыл бұрын

Are you still friends with Mike after you blasted the plans he spent weeks painstakingly constructing? 😂

@3x3CustomTamar 3 жыл бұрын

I hope so 😂😂😂

@MikeTaylorToolworks 3 жыл бұрын

Still friends! Haven’t unsubscribed…yet!! Hahah Really nice job with the entire build.

@aj.8665 Жыл бұрын

Master class in communication skills with precise instructions. You don't waist one word unnecessarily, and you display a great personality that is very easy to listen to and follow. You definitely convinced me to make this jig, even though I've made mortises on my router table, this is another tool to add to my tool box. Thank you Tamar!

@blackhorse2947 Жыл бұрын

Very interesting and thank you for the demonstration

@stanwiggins3423 3 жыл бұрын

As always, a pleasure to watch you, learn a new trick and get a new jig to grow my woodworking skills even more.

@3x3CustomTamar 3 жыл бұрын

Awesome. Glad you liked it!

@kgeo753 Жыл бұрын

This makes me more likely to buy a Domino.

@e.t.preppin7084 3 ай бұрын

Me too!!!!

@holdemNE1 3 жыл бұрын

After watching this video all I can say is "Thank God I saved up my money and bought the Domino Joiner."

@3x3CustomTamar 3 жыл бұрын

Ha! I will get one eventually , but its cool to show options

@holdemNE1 2 жыл бұрын

@@svenulfskjaldbjorn5401 The Domino has been around since 2007. If you wanted one you needed to work a little harder when you were capable. You are too old now. I myself worked a side job on the weekend that made me about $100. I saved that for a year and bought one when they were $1100 about 2 years ago. I have a feeling you just didn't want to give up your bar time to afford one. You probably spend a fortune on cigarettes as well. I didn't insult Tamar at all by my comment. She even replied with a "Ha" so keep your negativity to yourself.

@benbehrman550 Жыл бұрын

Christ man what’s wrong with you? And how do you follow all that with “keep the negativity to yourselves”

@CotyCondry 3 жыл бұрын

I love all the little tips, like rough cut first, then route, then trim to final size.

@3x3CustomTamar 3 жыл бұрын

Awesome to hear!

@Stacky18 3 жыл бұрын

Your channel has been the biggest help with learning woodworking of any other resource I use.

@3x3CustomTamar 3 жыл бұрын

Awesome

@kendogthunder 6 ай бұрын

I just found your channel, I'm impressed with your abilities and your explanations. Not to mention you're having fun and enthusiastic.

@seanwalsh8036 2 жыл бұрын

This lady is an excellent teacher.

@timdales8300 Жыл бұрын

Amazing! Tough build, but you explain it so well. Thanks! We gotta start calling you the "JIG GIRL" 😍😍

@LimitedGunnerGM 2 жыл бұрын

I absolutely love the outtakes and that you show it when you make mistakes. I appreciate the logic explanation along the build. Thanks!

@3x3CustomTamar 2 жыл бұрын

Haha glad you enjoy. Thanks!

@jonnyschneider7967 2 жыл бұрын

This is super. I've been cutting mortices on the router table, which works fine but ALWAYS feels a bit dicey when lowering workpieces over the bit, particularly for full depth cuts. I love the matchfit system and template routing with guide bushes, so this seems like a perfect alternative. Thanks!

@3x3CustomTamar 2 жыл бұрын

Glad you like it!

@leswheeler2023 3 жыл бұрын

One of the best jigs I have seen, and simply explained. Well done.

@3x3CustomTamar 3 жыл бұрын

Glad you like it!

@nitrousman8882 3 жыл бұрын

Excellent job and wonderful teacher! Thanks for taking time to share your love of woodworking!

@3x3CustomTamar 3 жыл бұрын

So glad you liked it!

@toddz8579 3 жыл бұрын

Your enthusiasm is infectious - now I want to run out to my shop and make one of those jigs 😁 Seriously, now that I see how easy it can be to prepare for and to use loose tenons without a domino, I'll take the plunge, no pun intended. Thanks for the video!

@3x3CustomTamar 3 жыл бұрын

Haha have fun!

@nigelboucher2014 3 жыл бұрын

Once again a great watch. I just love the way you enjoy your woodworking. Keep smiling 🇮🇪

@3x3CustomTamar 3 жыл бұрын

Thank you very much!

@dacutler 3 жыл бұрын

Hi Tamar. I've built a few things you have shown on KZfaq before including your Rolling Scrap Wood Storage Cart, and they were all great. I have just completed this mini mortising jig and it too works great!. This must be the 6th or more times I have made a mortising jig and this, by far, works the best, and is the most convenient and accurate. Many thanks again. I have also just got your templates for the three piece table / stool and am waiting for 3/4 inch cherry to build my first. I plan to build many in different woods and try to sell them at the local markets when they finally opens again. Many thanks again, and take care.

@3x3CustomTamar 3 жыл бұрын

Wow. So awesome to hear! Have fun with those!!!

@kenkroner3690 2 жыл бұрын

I just finished making the Mini-Tenon jig per your video and plans. It worked out great. Sure beats buying a “Domino” for my small projects. Your instructions were the reason it works so well. The supplies you mentioned from Taylor Tools made it easy to get the correct router bits and loose tenons if one was so inclined. Thank You and keep up the good work

@3x3CustomTamar 2 жыл бұрын

So awesome to hear! Glad it worked out for you!

@kated47 3 жыл бұрын

I didn’t know what a jig was before seeing your videos but now I love a good jig. I don’t do much woodworking at all but now I want to. Also, routers are so cool.

@3x3CustomTamar 3 жыл бұрын

Hahah! When I first started, I would watch these jig videos and I was like “yeah, I’m never going to make those....” 5 years later, give me all the jigs! 😂😂

@mainewoods1862 3 жыл бұрын

So talented and a gifted problem solver. Thank you 🙏🏻

@edt5276 7 ай бұрын

Excellent video production! Thank you for speaking fast, fast-fwding through boring parts, and thinking the content is more important than hamming it up for the camera. I can't remember the last time I watched a video on less than 1.5 speed setting. Originally, I got annoyed at imbedded commercial, but 5-tapping thru it was a lot easier than waiting 5 seconds to "skip".

@alvinrivera7967 3 жыл бұрын

Your a great instructor, very smart and your fun to watch. It's refreshing to watch someone who is not full of themselves and very happy doing what they do. Keep it up im new to your channel and will follow you.

@3x3CustomTamar 3 жыл бұрын

Awesome to hear!

@aaudain1 Жыл бұрын

I just saw this video I got to admit that all your video is so clearly explain no loud 📢 music 🎵🎶 and noise in the background how awesome 😎

@allthegear-noidea1264 3 жыл бұрын

So simple and easy to understand. Beautiful job as always, another great video from the Router Jig Queen of Chicago!

@3x3CustomTamar 3 жыл бұрын

Hahaha! Me and Abe froman. So much in common

@johnmurphy168 3 жыл бұрын

That loose tenon jig is something else. I’m looking forward to making my own for my half inch rougher thanks for the plans 👍👍

@3x3CustomTamar 3 жыл бұрын

Glad you like it!

@kingoftowns 3 жыл бұрын

Just made one. Now waiting on the 8mm and 10mm router bits. It definitely feels nice and seems like it’s gonna work out nicely. Thank you!! Hopefully this lets me push out a domino for another year or so.

@3x3CustomTamar 3 жыл бұрын

Awesome!!

@zicarwoodworking 3 жыл бұрын

For quite a long time i was wondering how to express 榫卯 in english, your title gives me the answer. In my opinion, MORTISING and tenon joint is better than glues and nails in woodworking

@kodl283 3 жыл бұрын

Such a long and detailed description of simply jig. Thank you!

@3x3CustomTamar 3 жыл бұрын

Glad you like it!

@mitchdiaco2565 7 ай бұрын

You're awesome the way you're documenting the builds! Thank you!

@davidcaush5036 3 жыл бұрын

I really wished you lived in the UK, you are a true inspiration to all. Keep up the good work and I look forward to your next project.🐶🇬🇧

@3x3CustomTamar 3 жыл бұрын

Ha! Thanks!

@josechavez5950 3 жыл бұрын

Simply Brilliant! Thank you so much for simplifying the whole process. Cheers from Chicago!

@3x3CustomTamar 3 жыл бұрын

It’s so simple yet packed with features!

@dave20874 3 жыл бұрын

I really look forward to each of your videos. The jigs and techniques you show make me want to go start a project of my own.

@3x3CustomTamar 3 жыл бұрын

That's really so awesome to hear!

@lou9108 5 ай бұрын

I was going to get the jig from Taylor tools anyway but had the addition of your designing the plans and you tube video, what a bonus. The work you did to get the graphics and plans together was worth the $5... would pay for that any day. Thank you

@horcadam 3 жыл бұрын

I really love the fresh and eassy to understand way you make things out!!! Thankyou!!!

@3x3CustomTamar 3 жыл бұрын

So awesome to hear!

@barryward1365 10 ай бұрын

A brilliant tutorial and a brilliant jig - thanks to you and Mike Taylor for sharing this. Respect.

@3x3CustomTamar 10 ай бұрын

Glad you enjoyed it

@jefftothealbright Жыл бұрын

Excellent. This is my 3rd or 4th video of yours I’ve watched. Subscribed because of the clear and concise explanations and how useful all your videos have been.

@3x3CustomTamar Жыл бұрын

Awesome, thank you!

@maxwoodstarter6412 3 жыл бұрын

The moment of truth...the only truth is that you are incredibly precise, clear and resourceful...incredibly awesome!! Thank u for your videos and ideas.

@3x3CustomTamar 3 жыл бұрын

☺️☺️ glad you liked it!

@pemtax557 2 жыл бұрын

I swear that you could do a video on how to do a video ... you are so thorough, organized and demonstrate everything with outstanding video angles and zooms, clear and concise commentary as well as the most complete "show more" content information. You literally make recreating your projects as easy as it can possibly be through this media. Color me impressed. I spent 40 years training engineers on how to organize their development projects for success and had to learn the hard way how to best do that ... I could of used your approach as a guide on how to best do that. You really have a knack and talent for this. Keep up the excellent work, you really do have an impact on those of us in this wonderful community. Cheers ...

@3x3CustomTamar 2 жыл бұрын

That’s really so awesome to hear! Thanks!

@GiveMeCoffee 3 жыл бұрын

You are awesome! Kudos to your friend who came up with the jig!

@3x3CustomTamar 3 жыл бұрын

Yeah! I was so impressed with it, I had to share it!

@mor8266 2 жыл бұрын

WOW!! Thanks for another outstanding jig. The Micro Jig stuff is a great versatile invention.

@3x3CustomTamar 2 жыл бұрын

So glad you like it!

@robertbrock2623 3 жыл бұрын

One of the “slickest” jigs I’ve ever seen!!! Nice work Tamar!!! You saved a lot of folks $1500 plus bucks!!!

@3x3CustomTamar 3 жыл бұрын

Glad you liked it!

@MrBigMalT 15 күн бұрын

Love this! I’ve watched the vid several times, and finally got round to ordering Tamar’s plans and building it. I’ve just got into 3D printing so I designed a little set up block, exactly 18mm (¾”) wide, with a fine groove exactly down the centre, so I can use that for setting the fence position - it’s even easier than using a combo square, and even consumer level 3D printers are pretty accurate these days 😊

@drdwm007 5 ай бұрын

Tamar you are the best! Your style of teaching is very clear and concise. I have always wanted a domino and now I don't need one. Thanks

@3x3CustomTamar 4 ай бұрын

Awesome. Have fun!

@KeithBurtis 3 жыл бұрын

Not only did I purchase nearly everything in the build list but I also purchased the plans. I've got a bed I am building for my niece and investing in the time to make this jig will come in very handy. I would recommend these plans as well as they are very detailed and specific. Most plans I buy wind up in tge trash or I have to basically redraw them to make any sense. Thanks again!!!

@3x3CustomTamar 3 жыл бұрын

So awesome to hear! Good luck with the bed build!

@littlefallsworkshop 3 жыл бұрын

I have a few of your jigs on my list of things to make. I think this one will be added to the list too. Thanks Tamar (and Mike)!

@3x3CustomTamar 3 жыл бұрын

Awesome! All thanks to Mike!

@pip5461 2 жыл бұрын

You always make it look so easy... I could willingly watch you all day long...making stuff...:)

@3x3CustomTamar 2 жыл бұрын

@realtytalk Жыл бұрын

Very cool jig! I can see myself making and using this! I have a biscuit joiner, but of course, I only use that for alignment.

@silviavpereira7569 2 жыл бұрын

Great jig! And I like the wood you've chose. It's very beautiful. Your explanation is great too. I've got the urge to build one for my small workshop. Thanks a lot!

@3x3CustomTamar 2 жыл бұрын

Thanks!

@benraf 3 жыл бұрын

What a cool idea? May you never run out of ideas for new projects. I'm looking forward to your next video. Greetings from Germany

@3x3CustomTamar 3 жыл бұрын

I hope I never run out either. Ha! Thanks!

@Ianhurley54 3 жыл бұрын

Wow you’re so good at explaining everything with this jig. Nice work!

@3x3CustomTamar 3 жыл бұрын

Glad you like it! Thanks!

@fwanknmt 3 жыл бұрын

I was literally about to make a jig like this over weekend, this is a great help thanks!

@3x3CustomTamar 3 жыл бұрын

Awesome! Have fun with it! I was about to make a similar one too. Then Mike sent me an email. Ha

@albatros1752 3 жыл бұрын

Spectacular !!! Just find U yesterday ,and I'm in AWW how great you explain things I do complicately my whole life (40+ years), and yours shop is clearly for work , not just that shinny punk Festool display like some others ,,tubers" presenting

@3x3CustomTamar 3 жыл бұрын

Haha thanks! Glad you like it. But I do hope to upgrade my tools at some point 😉

@albatros1752 3 жыл бұрын

@@3x3CustomTamar Nothing again festool , in the contrary i got bunch of that , just them shinny video ready spaces, that never .... produced anything physically productive.... just good editing

@richragan4810 3 жыл бұрын

Thank You Tamar this is a great jig. Lots of editing and camera work that's much appreciated as well. Peace and saftey!

@3x3CustomTamar 3 жыл бұрын

Glad you like it!

@64maxpower 3 жыл бұрын

There's a reason you have nearly 500k subs. I love your instruction. You impress even the most season wood worker

@3x3CustomTamar 3 жыл бұрын

Awesome to hear

@woodman3416 3 жыл бұрын

Tamar, you videos are so easy to follow and fun to watch. Very interesting jig. Another excellent video.

@3x3CustomTamar 3 жыл бұрын

Awesome to hear

@NoahTom 3 жыл бұрын

Thank you so much Tamar, looking forward to building this jig tomorrow!

@3x3CustomTamar 3 жыл бұрын

Awesome. Have fun with it!

@gedevison4562 3 жыл бұрын

Great ideas as always and nice to see its warmed up in shop as you've took your coat off, I've opened door for first time this year.

@3x3CustomTamar 3 жыл бұрын

There was one day last week when it was warm! Back to being cold... hopefully soon 🤞

@bryanwight765 3 жыл бұрын

Love your wood choices, makes it look like a work of art.

@3x3CustomTamar 3 жыл бұрын

It’s what I had.... ha. It does make it look really cool though!

@donpugeau3916 4 ай бұрын

Awesome video and awesome jig. I did my first mortise and tenon joints using the edge guide on a full sized router. I definitely had a few mistakes where the router got away from me a few times. I knew I needed better control for my next project. I did some research and liked your presentation on this jig. I built it in a few hours one afternoon and was ready to use it the next morning. My project calls for a 3.5" long mortise. With my Milwaukee compact router and base plate that accommodates the guide bushings the jig, as designed, wasn't wide enough. So I quickly built a longer top piece and was good to go the next morning. It worked perfectly and I'm very happy with the results. Like you said in the video, my mind is thinking of so many ways I can use this versetile little jig. Thanks so much! P.S. I also built your 6-in-1 router jig and bought the benchtop router table for it that you and KM tools developed. Now, I'm looking for projects just to use these new "toys", LOL. Fun stuff!!!

@sui24fu 2 жыл бұрын

I wish I had seen this video two months ago. I could have used this jig on a project I'm working on now. I'll have to buy the plans for my next project with loose tenons. Great video.

@3x3CustomTamar 2 жыл бұрын

There’s always the next project!