(40) Precision HOIST Pins Machined From 4140-HT Steel / Part 3- MSFN

Рет қаралды 7,681

5 жыл бұрын

SERIES LINKS:
Link To Part 1: • (40) Precision HOIST P...
Link To Part 2: • (40) Precision HOIST P...
PART 3 of 3: Manufacturing (40) Precision Hoist Pins From Raw 4140 Stock for a Rush Job To Be Completed in Just 2.5 Days.
Lots of quality machining footage in this series and my thought process to complete the job…hope you enjoy! Please subscribe and click the notifications “bell” to get notified of newly released videos. Thanks for Watching!
Support:
Please Consider Supporting MSFN To Help Pay For Supplies Needed For Future Video Projects, Even a Small Donation Goes a Long Way!
www.paypal.me/MSFN (Paypal Only)
goo.gl/1nmBdi (Paypal, Credit/Debit Card)
KZfaq: / makinsumthi. .
Twitter: / msfn_on_youtube
Instagram: / msfn_youtube
Business Inquiries:
email: makinsumthinfromnuthin@gmail.com
MSFN= Makin Sumthin From Nuthin!

Пікірлер: 96

@MakinSumthinFromNuthin 5 жыл бұрын

SERIES LINKS: Link To Part 1: kzfaq.info/get/bejne/hd91gJqqrpurZGw.html Link To Part 2: kzfaq.info/get/bejne/ocVlea9_q5-uiX0.html

@jmtx. 5 жыл бұрын

Good to see it all come together in the end. Time to sit back, have a cold one and let the wounds heal.

@MakinSumthinFromNuthin 5 жыл бұрын

I heard that! Thanks for following the series!

@johnnywayne7654 5 жыл бұрын

As a 25 year Journeyman Machinist I was going to give you my thoughts on process improvement. Then I stopped. This was entertaining (in a good way of course!)to watch and I enjoyed the series you put together. You had adversity dealt from the get go with such a tight deadline, however, in the end you overcame, you persevered and you conquered. Thanks for sharing! 👍

@MakinSumthinFromNuthin 5 жыл бұрын

Ha, thanks...even I have to look back on that job and laugh....that deadline was brutal. And YES, I Have LOTS to learn 😊 ~Richard

@stxrynn 5 жыл бұрын

This series sure proved the need for stops. Production is something I haven't done. But I'm gonna work on stops for the rest of my gear. the ability to take the constant measuring to spec out of the process sure speeds everything up. Well done. Thanks for the quick education. Your blood wasn't wasted on me!!

@MakinSumthinFromNuthin 5 жыл бұрын

Making stops will be time well spent. I plan on making some. I appreciate ya!

@stephenwagar2663 5 жыл бұрын

Welldone !!!! They Look Great !!!

@MakinSumthinFromNuthin 5 жыл бұрын

Thank you sir!!

@rickkan8052 5 жыл бұрын

We all learn together with you Thanks for sharing 🎣🍻

@MakinSumthinFromNuthin 5 жыл бұрын

Thanks Rick, I learned a lot about what not to do at times

@jster1963 5 жыл бұрын

Great work!

@MakinSumthinFromNuthin 5 жыл бұрын

Thanks Jster!!! I appreciate ya

@danielworthy4943 4 жыл бұрын

This definitely helps a lot I appreciate it.

@MakinSumthinFromNuthin 4 жыл бұрын

Thanks! :)

@TomokosEnterprize 5 жыл бұрын

Good to see these out the door eh. Great job done !

@MakinSumthinFromNuthin 5 жыл бұрын

Thanks Dean, felt the same way

@rf-bh3fh 5 жыл бұрын

Great 👍 vid

@guypatts494 4 жыл бұрын

Nice job

@MakinSumthinFromNuthin 4 жыл бұрын

Thanks!

@RickRose 5 жыл бұрын

Congrats on meeting your deadline with a quality product. I hope they were happy.

@MakinSumthinFromNuthin 5 жыл бұрын

Thanks Rick, there were many times I didnt think I was going to make the deadline

@DudleyToolwright 5 жыл бұрын

I think you did great and I loved the surface finish.

@MakinSumthinFromNuthin 5 жыл бұрын

Was a great material to work with for sure Dudley

@superpedro7295 5 жыл бұрын

Amazing

@MakinSumthinFromNuthin 5 жыл бұрын

Thanks Pedro, I appreciate ya watching

@superpedro7295 5 жыл бұрын

Thanks to you i am looking for a lathe. Maive not for your use but for making repairs and things for me. Thanks again , very inspirational

@MakinSumthinFromNuthin 5 жыл бұрын

That is awesome! Buy as big a lathe as you can afford and have room for ~ Richard

@shawnmrfixitlee6478 5 жыл бұрын

AWESOME ..YA DID IT !! ... Great job man..The War was won ! ENJOYED ..

@MakinSumthinFromNuthin 5 жыл бұрын

Thanks Shawn, it was a LOT of repeated operations to complete 40 pieces accurately in just 2.5 days from raw bar stock. Not one of my more polished series....but showed what it is like under the gun and a deadline and no room for "excuses". A day in the life of a machinist. Thanks for watching

@userwl2850 5 жыл бұрын

You did it and on time. Top man.. Top job. Your arm looked a little sore at the beginning.... no pain no gain with all that bush hitting you. Great series Richard. 👍

@MakinSumthinFromNuthin 5 жыл бұрын

Thank You David, I appreciate all the support. I have only owned this lathe for 2 years and never ran one before buying this one~Richard

@davidjames1007 5 жыл бұрын

Nice job well done. Nothing like learning under pressure...lol

@MakinSumthinFromNuthin 5 жыл бұрын

What pressure....LOL 😊

@ChrisB257 5 жыл бұрын

Sure was an 'interesting' challenge Rich - glad you got thru it all and finished up with a result (and maybe a headache!). :)

@MakinSumthinFromNuthin 5 жыл бұрын

I struggled with it Chris, but the customer got exactly what he ordered so all is well. Thanks for stopping in ~Richard

@ChrisB257 5 жыл бұрын

Vernon said about your problems - I hope to get a short video up soon but was waiting to see if you were going to put up a video explaining a bit - then I can promote this in my video with some basic details.

@MakinSumthinFromNuthin 5 жыл бұрын

Thank you Chris, I was just made aware of what Vernon did of his own accord a day or two ago. I had surveyors on site yest and today and dealing with my lawyer on this matter the last 2 days and not any time to make a video. Hope to get a video out soon so people know why Vernon did what he did on my behalf. All the support is much appreciated and deserves clarification from me

@MakinSumthinFromNuthin 5 жыл бұрын

I put up a video today on the issue Chris kzfaq.info/get/bejne/qJ2dYKuDranNZqc.html

@CraftedChannel 5 жыл бұрын

Gauge blocks would be the great way to space off the drill bit. My father taught me how to use gauge blocks for all kinds of things on the lathe. You probably don't have a set but man are they great for little issues like that.

@MakinSumthinFromNuthin 5 жыл бұрын

Wish I had a set Dave, all worked out in the end tho :)

@tano1747 4 жыл бұрын

Or just take time to face off a piece of scrap material to the length you needed for this project as an improvised single- use gauge block?

@Molb0rg 5 жыл бұрын

nice

@MakinSumthinFromNuthin 5 жыл бұрын

Thanks, was glad to see it done :)

@FucGunControl 5 жыл бұрын

I know rigidity is a major player here but i turn 4140 more than anything else for equipment pins. i have found that lower speeds and heavy cuts give me better results and the chips turn out beautiful. It's gotten to where i Love to turn 4140 due to its beautiful finish. I still run into problems with it moving into the chuck especially when its a clean surface in the chuck, so i made a chuck stop for it. Also it work hardens when it gets hot. I use a noga cool mister and that helps a ton. Nice work overall. ( and yes i drill the hole after the turning lol)

@MakinSumthinFromNuthin 5 жыл бұрын

I ran the higher speeds for the sole reason of making the deadline....I soon realized at the beginning I was never gonna make it. 4140 is great stuff, gonna use it much more often....and when I am not in a hurry...LOL

@Fr1day-RT 5 жыл бұрын

I really enjoyed this series. If this is a repeat job I would suggest soft jaws. On one side just straight with a back wall so the part can't push in. The other with a relief in the back to clear the pin head. Also to break a chip well your nose radius needs to be smaller then your depth of cut. If I made the mistake of drilling first I would have tried to groove it down close to size so it didn't hit it every pass.

@MakinSumthinFromNuthin 5 жыл бұрын

I love all the feedback I been getting, can only make me better. I made mistakes....viewers pointing them out and offering advice is priceless...Than You! PS: I have 3 unused soft jaw sets for that chuck :)

@MakinSumthinFromNuthin 5 жыл бұрын

Those are really good ideas sir

@EverettsWorkshop 5 жыл бұрын

Bet you're relieved to have that rush job out the door! Now you need to figure a project that would use up 40 little slugs of 4140 . . . Thanks for sharing, it was interesting to see your process.

@MakinSumthinFromNuthin 5 жыл бұрын

Process or chaos...one of the two 😊 I was glad to get it done on time. I think I have a project for those slugs in mind. Thx for following the series Everette ~ Richard

@RickRose 5 жыл бұрын

I was thinking the same thing.

@cliffordfender1159 5 жыл бұрын

need to get that key out of that chuck !! Have you ever seen one fly out when you forget that's it in there?

@MakinSumthinFromNuthin 5 жыл бұрын

Agree, I was filming between part swaps, 40 pieces....15 operations per part. I was careful.....still living! LOL thanks for watching....and a good safety point

@bcbloc02 5 жыл бұрын

Chips everywhere just means you are working! :-)

@MakinSumthinFromNuthin 5 жыл бұрын

I am still finding them from that job, it was actually done in August but never found time to edit the footage

@Steve_Just_Steve 5 жыл бұрын

Takes a lot of time to find zero with drill then dial in, would it be possible to pull the head up against the back of the jaws to index it then face to same zero on the carriage for every part buddy? Thx for the vid.

@MakinSumthinFromNuthin 5 жыл бұрын

I saw too much risk of error if the length was off on any so took the safe route, was only 4 min each and was ahead of schedule by that point. Thanks for all the great comments Steve

@johnjones3321 5 жыл бұрын

Just put drill against jaw Set a carriage stop and face They will all be the same

@Watchyn_Yarwood 3 жыл бұрын

Sent by David Wilks, Missing more content!

@DavidPlass 5 жыл бұрын

If you had to do it over, what would you do differently?

@MakinSumthinFromNuthin 5 жыл бұрын

Hmmmmm, Make a proper stop for the chuck to avoid pushing the work into it Use a left hand turning tool when turning away from the chuck as I did towards the end Use a parting tool to create a groove before turning away from the chuck to avoid plunging Not drilled the hole prior to turning to a diameter make additional carriage stops to ensure quick repeatability on length dimensions Allow extra machining time, 2.5 days was pushing the limit for a manual machine for 40 pieces (in my opinion) Richard

@drmodestoesq 4 жыл бұрын

@@MakinSumthinFromNuthin I personally would have made....say 44 of them. That way I wouldn't have that constant tap on my shoulder saying don't screw anything up...because there's no room for error. And the client probably wouldn't mind a few free ones. Think of them as promotional extras.

@rodneysrepurposingrecyclin3821 5 жыл бұрын

The guys that do the canister welded pattern steel should hit ya up for some of those chips an rounds. Mixed with some of that powder an beat into a blade....... Also like to say it appears you work well under pressure

@MakinSumthinFromNuthin 5 жыл бұрын

Thanks Rodney, I like to think so

@rodneysrepurposingrecyclin3821 5 жыл бұрын

@@MakinSumthinFromNuthin yes sir

@MaturePatriot 5 жыл бұрын

Camera work be darned. You had a deadline to meet! Nice work. Where?

@MakinSumthinFromNuthin 5 жыл бұрын

That was my sentiments exactly! Hahah Wooden floor and 1300 RPM didnt play well together so camera work suffered horribly

@MakinSumthinFromNuthin 5 жыл бұрын

Gibsonton, FL

@jamiebuckley1769 5 жыл бұрын

good job on time and under budget lol.

@MakinSumthinFromNuthin 5 жыл бұрын

Thanks Jamie, was a long road...LOL

@MyHeap 5 жыл бұрын

They look great Richard. So, am I going to have to buy you a broom and a big ol' electromagnet? :-)

@MakinSumthinFromNuthin 5 жыл бұрын

Yes, please provide tracking number, LOL

@StephenMortimer 5 жыл бұрын

Heapster don't encourage this PANHANDLING by the Palmetto Panhandle Panhandler

@tjs_welding_and_fabrication 5 жыл бұрын

Hope you made some money on this.

@MakinSumthinFromNuthin 5 жыл бұрын

It was the highest paying job I ever got in the shop. Thanks for watching

@JamesDedmon 5 жыл бұрын

You had your hands full. I hate rush jobs

@MakinSumthinFromNuthin 5 жыл бұрын

me too, but needed the revenue

@jeffryblackmon4846 5 жыл бұрын

CNC time? Good work. Where are you? I'm in S/W Ohio.

@MakinSumthinFromNuthin 5 жыл бұрын

CNC woulda been nice....I am in Florida

@MaturePatriot 5 жыл бұрын

Makin Sumthin From Nuthin East or West?

@MakinSumthinFromNuthin 5 жыл бұрын

Tampa Bay Area Vernon, just SE of Tampa

@StephenMortimer 5 жыл бұрын

Layoff that Palmetto juice... it's NOT what ya LERN... it's what ya EARN !!

@MakinSumthinFromNuthin 5 жыл бұрын

Made a few on this one :)

@StephenMortimer 5 жыл бұрын

Makin Sumthin From Nuthin I'm not discussing mistakes .. I'm talking about good ole Yankee green backs !!

@MakinSumthinFromNuthin 5 жыл бұрын

so was I LOL

@StephenMortimer 5 жыл бұрын

Makin Sumthin From Nuthin Bet it ain't nearly enuff to make yer monthly payments on insurance against TERMITE, BOLL WEEVIL, FLOOD, HURRICANE and other southern disasters . !!

@MakinSumthinFromNuthin 5 жыл бұрын

you are right, thats why I have a Paypal link on my homepage Steve 😊