Thanks for watching. I hope that it helps.

Wow, thanks! I am glad that I could help you. Good luck with your projects.

Pat Gentry thanks Pat

Thanks man. This was actually my first project as well. Have fun with your project. Thanks for watching.

Thanks for watching. I am glad that it helped.

You are welcome. Thanks for watching.

Thanks

+Jose Moran I am glad that this will help you. Good luck with your project.

Thank you. I am glad that you enjoyed it. I hope that it helps. A helpful tip that I could out is that smaller surfaces are a little harder to start out on. The pillars were perfect for starting.

Thanks man. Hope that it works out well for you.

Thank you

Thanks for watching. Good luck with your project

Go for it! Thanks for watching and good luck on your Kia.

No problem. I hope that it helps. Good luck on your project. Thanks for watching.

Thanks. I hope that this video helped you

No problem I hope that this helps.

Chyna Barnes I probably had 3 time as much left over I can’t remember but I believe I bought a 4x5 piece. Thanks for watching.

+GR81 This was actually my first time doing it thats why. Once I got to the other side is was super easy. It will be the same for you if they are simple pieces to cover like this. I have 2 other vinyl videos and you can see that it got much easier. Thanks for watching.

Thank You

Thank you. I hope that it helped.

Thank you I am glad that I was able to help you out. Remember to share and subscribe for more current videos.

No problem I hope that it helped.

Thanks. It wasn't very hard to do and you will also have more room for error. Those kits are cut almost exact. If you are the slightest bit off you will have to buy a new set. This is a much easier and safer way to do it.

Do you have any recommendations as to where I can find this material online? I saw a few dealers on Ebay and one of them is selling a 12" x 60" roll for about $6.00. Not 3M brand but a clone of it I suppose. I also heard it's easy to remove in case you no longer like the look and it leaves no sticky residue behind. Is this true? Thanks!!

Yes it is super easy to remove. I would try to get a good quality vinyl because it will give you better results. I believe my stuff total was like $40 will tools included. Just do a google search for automotive vinyl.

Dave Medicus Thanks again for your help!!

Not a problem

MyCatInABox it was very easy. There was almost no learning curve.

I’m glad that they are holding up

Thank you

No problem. I am glad that it helped

Thanks for watching.

Thanks for watching, I hope that it helped you.

On mine heating it up softened the material making it easier to cut.

Thank you 🙂

Thanks for watching.

Thanks. I hope that this gives you some good ideas for your projects. If its your first time start small. Do not over complicate things with complex shapes.

@ DM....very true indeed my friend! I'll keep it straight and simple at first....thanks again bro.

Not a problem.

This was honestly my first attempt at it. Just take your time. Its not too bad on small simple items. Thanks for watching!

Thanks. How did it come out?

@@DaveMedicus very impressed with results, superb look at only 18 pounds. I was lucky enough to be able to remove the pillars and sand them and stick the carbon on away from the car ,

Very welcome. Thanks for watching.

Thanks!

+Jim Burgoyne No problem I hope that this helped you. Thanks for watching

+Haider Jaber Thanks for watching. Hope that this helped.

It was 70 outside temp.

Use a good wrap brand. The one I used didn't last very long and I have to redo it. The adhesive on the back didn't hold and was lifting and expanding in the middle. I would use like a 3m or better product

Dave Medicus Yeah Amazon has some pretty sweet deals on rolls from 3M. Thanks man!

Thank You. Good luck with your project. Thanks for watching

Glad it helped. Thanks for watching

Thanks 👍

Thanks for watching

Thank you. Glad that you enjoyed it.

No problem I am glad that you enjoyed it, and hope that it helps you in the future.

***** Thank you

*****

Thank you I am glad that you enjoyed it

I had one but I liked the control I had with the blade.

+Hamza_RJi Now you are making me jealous. I actually sold my Alpine White 2005 645Ci before I moved out to Arizona to learn how to fly helicopters. That was my favorite car that I have ever owned with the exception of the constant oil leaks that I had to fix. I am glad that this video helped you.

Dave Medicus no bro honestly i was joking 😩 i dont have them they are my dreams.. but i only havr bmw 320d e46 😔

It should look really nice. When the sun hits it will really shine

Dave Medicus now you need window tint it looks bad a$$

You don't have to get carbon fiber vinyl wrap. The vinyl wrap is available in many different colors and finishes. Look on eBay and Amazon to see all of your options, many sellers will also offer a small piece of wrap for just a few dollars so you can see how it looks in person. I bought a sample from 1 dealer, it looked great on the internet, but looked like crap in person.

Thanks

Thanks man. I would use 3m vinyl the stuff that I sued was cheap but did not hold up to the conditions in Arizona.

I'll keep that in mind, I wanna do a lot of carbon fiber wrap in my 300, thinking of doing wheels also

Angles are hard but for a beginner I would try to stick with more of the flatter/slightly curved pieces. I have a few other videos where I did the interior handles I would watch if I were you. This was actually my first project with vinyl. Good luck and let me know how things go.

Thanks for watching. I appreciate it

I kept it on for 3 years but you can keep them on for way longer. I’ve see people easily get 6 years out of it. I had a decal on my truck hood for the 8 years that I owned it. It just gets a little harder to pull off because it gets brittle with age. I’m talking about when under force.

How will it remove the vinul without damage your cat tnx

Thanks. Good luck. Try to use a high quality vinyl. This stuff was crap

+Dan Stump Thanks. Good luck. Try to use a high quality vinyl. This stuff was crap

Thanks!

I’m glad it helped. Thanks for watching.

Thank you.

Thank you! Thanks for watching.

It hank you. I hope that this video helped you some how. Thanks for watching.

+akshay sobs You can try to apply heat to the vinyl to melt the glue already on the material and try it. Other than that if its not sticky I would not even attempt to use it. There is some glue that would hold the edges but that won't help you if the material is bad.

You can trim it immediately. This video was actually my first time so you can do it too. the heat gun is only needed if you have to stretch the material. If you have to stretch it a lot there are some good videos on youtube with tricks when using a heat gun.

ANAD Colz thanks

Thanks for watching!

Thank you. Best of luck with your project.

Thanks

I bought mine at www.metrorestyling.com I would try to use 3m for a better product

Thanks

Thanks for watching

Thanks it held up great. I took it off after about three years

Thank you!!! Thanks for watching.

Thank you

You're welcome! Thanks for watching

Thank you!

Never heard of that before. Like Hydro dipping?

Thank you.

You can always use a hair dryer as a fall back just be careful because they get hot fast.

Let me know how they come out. Make sure that its clean and anything should be better than what you have.

Yeah I'll rub with alcohol and wipe it down

Thanks for watching

Yes.

Thanks for watching

I had no issues when I peeled mine off. Actually my pillars looked amazing and I didn't have to put anything back on them.

flatearth crypto yes they are. Lol

You can get carbon for any vehicle. You would just need to cut it yourself.

@@DaveMedicus thanks!! babyboy,one more thing does it come off when you wash your car.

Ernest Spriggs thanks.

iamMrBiggs I would not have been able to wrap around the inside of the door and make it look right if I did the, both together. The trim went around the inside pretty far. I believe I showed it farther back in the video.

Basiru Rahim it was only like $7 for a 1'x5' piece

Allan Cabibihan yes. You just may have more angles to deal with.

Thanks Boss. Sorry I am just seeing some of these comments now.

Gracias por ver mi vídeo.

Thanks for watching!

Kit Anilapde no I never did the hood. It would not be that difficult it uses the same principals.

I kept it on for about 4 years it held up great. I would put wax on it to help protect it from the Arizona sun. I still have the vinyl on the interior of my car so it holds up

@@DaveMedicus good to hear, appreciate the response!

@@mygt8a4re no problem. Thanks for watching

No I wasn't cutting into the paint because there was a lip I was cutting against. I never had any wrap actually touching the paint. Very simple process on my vehicle. Thanks for watching!

Thank you sir

+Corey Longenecker In the video it did look good when I wiped off all of the dust, but in person it was a totally different story. It is a faded black. Watch around 1:50 when I open the door at how hazy the shine is. Thanks for watching.

Logan I am doing great. The vinyl wrap worked great. I kept it on for about 2 1/2 years before I took it off. All of the edges held up great. The adhesive was not very strong on the cheap material I used so I would recommend 3m or Oracle. I plan on doing it again with a different style material just for fun.

Great! I hope you upload a new tutorial video then....looking forwards bro...cheers!

www.metrorestyling.com

Yes over time. This is why you want to buy a quality vinyl. Many companies will give you a life span estimate when in the sun.

+Dan Rosca Thank you. I hope that this helps you with your project.