4l60E ASSEMBLING TRANSMISSION

Рет қаралды 53,658

Robert Rushton

7 жыл бұрын

THE REASSEMBLE OF THE 4L60E PART 4

Пікірлер: 26

@eddieoglesby2941 3 жыл бұрын

Excellent video man, thanks for your help on the reassembly. Only the 2nd time I've ever attempted an automatic transmission. Mine work like a charm

@victorsamora6859 3 жыл бұрын

This video is a life save after reading the 4l60e bible 100 times them watching this makes perfect sense thank man god bless

@hondaman3396 6 жыл бұрын

I sat there fighting that band that goes around the deum for a hour and half. I watched your video and got it in in 30 seconds. Appriciate it man new subscriber

@robertrushton6622 6 жыл бұрын

thank you

@kennethbouch7796 Жыл бұрын

Has an ase master tech patch and puts in a snap ring with 2 screwdrivers instead of using snap ring pliers. That’s why I only work on my own stuff. I bet you never see Richard from precision transmission on here do something like that.

@robertrushton6622 Жыл бұрын

and what was the problem with the 2 screwdrivers most of the time I use snap ring pliers either way it gets the job done the transmission has not come back because of a snap ring failed I'm sure if you watch enough videos you will see it done many ways good luck working on your stuff your self I guess you tube made everyone a tech

@zrokayinenoumoumouni651 5 жыл бұрын

I like the transmission gear a lot.Please can u list me one by one the name of the all plates.Thank u.

@mafosa9563 3 жыл бұрын

whats the output shaft end play specs? thanks for sharing! larry

@giovannilopez9427 2 жыл бұрын

hey man wondering if you could help me out I have a 2011 Silverado with 4l60e I have first and second gear doesn’t catch 3rd or 4th. What could he the issues I was thinking about replacing the shift solenoids and the torque converter solenoid

@adrianherrera9688 Жыл бұрын

No way don’t waste ur time ur clutches are blown needs a rebuild

@MrMatloo 6 жыл бұрын

robert did you review the video before putting it up on you tube? can`t see most of the assemble of the servo.

@robertrushton6622 6 жыл бұрын

I will make another video on this servo today and put it on KZfaq by the weekend

@shawnhavey4862 Жыл бұрын

Would have been nice to know what tool you were using or is that a specialty tool rather than just putting it directly into the unit without showing the tool you were using or was it something that you prefab?

@shawnhavey4862 Жыл бұрын

On that of the spring cage clamp

@andrewrodriguez3292 6 жыл бұрын

Can you give a list of the tool list

@isacchris1 5 жыл бұрын

If you buy a transmission rebuild manual you can order the different tools! Mst of the tools can be made or improvised!

@1966badnova 7 жыл бұрын

...did you review your video before you uploaded it?

@robertrushton6622 7 жыл бұрын

1966badnova I did watch it why do ask

@user-ot1kv6vt7c 3 жыл бұрын

الترجمة العربية رهيبه 😂

@antoniomanriquez5598 3 жыл бұрын

Mirar

@LSX-zr8ng 6 жыл бұрын

Realistically do you think someone that can build a motor and has built race motors can build a transmission? Because I have built quite a few motors and rear ends just never a transmission because I have heard horror stories lol.. from your video it doesnt seem too bad.

@robertrushton6622 5 жыл бұрын

yes you can build it just take your time

@LSX-zr8ng 5 жыл бұрын

@@robertrushton6622 Thank you I may have to give it a try! By the way this is a good video man!

@jonassal2676 5 жыл бұрын

Try a 48re first they are easy. I built it myself, never built a motor and I'm 23.

@robertrushton6622 5 жыл бұрын

Yes I do believe you can build a transmission just stay organized and clean like you were going to eat off it just take your time

@brandonmetcalf1141 5 жыл бұрын

you havent seen the worse of it im 16 and ive seen worse