5.0 302 v8 swapped my 1999 Ford ranger. How did I do it. part 1of2

Рет қаралды 9,372

No road needed

Жыл бұрын

#v8swap #fordranger

Пікірлер: 30

@yamahondarider 2 ай бұрын

Some great info here! I don't see too many people using the 5 speed so thats one thing I was looking for info on.

@nrgtwinz95 Жыл бұрын

The truck is sick! Been a long time fan . I'm on a different account through. I have a 95 s10 I want to 350 swap. I have a 4.3 with a 5 speed now.

@noroadneeded8072 Жыл бұрын

Awesome, man. Thanks for the support. I am trying to make the best videos I can. An S10 with a 350 would be sick I have been watching (Chud327 on KZfaq) he has 2 v8 S10's

@savrabAuto Ай бұрын

Love the video & the truck! I have a 98 ranger I'm currently working on & now you have helped me decide to go for the swap! 5.0 Let's Go!!! Look forward to more on your build. Now, officially subbed to all your content.

@noroadneeded8072 Ай бұрын

I appreciate the support and interest, but unfortunately, I got into a serious accident in the in the truck and it got totaled and burned up.😢

@savrabAuto Ай бұрын

@noroadneeded8072 o no... I am so sry to hear that. You're OK, though, right?

@noroadneeded8072 Ай бұрын

Yes. I am perfectly fine. Thanks. Prays the LORD

@ltackett05 Ай бұрын

Hey there, very nice build! Was wondering about the wiring? I’m right at that phase with my 01 sport Trac and need help with re pinning the c115 harness? Any help would be greatly appreciated.

@elplevonrooo395 8 ай бұрын

What did you do about the A/C?

@jordantaylor3833 9 ай бұрын

Did you have any problems with the clutch not disengaging. I have a very similar setup but my clutch drags with the pedal to the floor.

@noroadneeded8072 9 ай бұрын

You have to bleed it very well. I have the stock clutch master cylinder and everything, and my clutch works properly.

@nrgtwinz95 11 ай бұрын

hey can you use a 3/4 inch belt on a lt 1000 to stop slipping?

@noroadneeded8072 11 ай бұрын

Yes you can. It will be tight

@nrgtwinz95 10 ай бұрын

Hey when you used to have a boat went winch on your mower did it work good?

@noroadneeded8072 10 ай бұрын

Not really.

@vicosee4439 6 ай бұрын

The 4.0 has 207hp and the 5.0 217hp do you feel any difference did you have to change the Wire harness

@SupraBdub 5 ай бұрын

The torque and torque points are noticeable too. I don't have a 50 swapped ranger myself but I know

@user-sv9vg8hw3n 9 ай бұрын

Do u use the ecm out of the SUV?

@noroadneeded8072 9 ай бұрын

Yes

@ShallowWaterFly 5 ай бұрын

Hey bro, I got a mud mower and how do I seal my flywheel bc everything I go underwater it stops

@noroadneeded8072 5 ай бұрын

I don't know. I have never done it. I would assume, though, that it it is a separate issue and not actually the flywheel. Thank you

@ShallowWaterFly 5 ай бұрын

@noroadneeded8072 thanks bro, I would love to ride at yorkshire sometime with u on the mowers

@noroadneeded8072 5 ай бұрын

Or I will have to go with you to the Peace River camp grounds. I have never been there.

@ShallowWaterFly 5 ай бұрын

@@noroadneeded8072alright sounds good to me

@charlesgarza6305 8 ай бұрын

Why do you want to put a carburetor on it? Isn't fuel injection better for off roading?

@noroadneeded8072 8 ай бұрын

It probably is, but whatever (horsepower)

@svrsxlt 5 ай бұрын

Built carbbed 302s are nuts and the power/ tuning isheels straightforward. @noroadneeded8072 im doing the same swap, love what you're doing man

@craigfisher9713 4 ай бұрын

What would you charge me if I help and pay your brother

@nrgtwinz95 Жыл бұрын

Bro I'm friends with chud we ride mud mowers together we live close.

@noroadneeded8072 Жыл бұрын

Cool. Didn't know that. Lol. I live a little too far from him. But I always wanted to ride mowers with him .