Thanks guys for watching! If you want to see the full hemi build check it out here: kzfaq.info/sun/PLeEwppcCDh6YWh2XLo7nNErvUgWqtVqAP

Wow .. you guys are doing a great job on the hemi .. an having fun at it too.. I’m excited to see what ur putting it in An Here it run.. I jus got my truck back today from transmission shop..it has 46RE in it with all the mods done to the 5.9 I was telling you.. now the transmission is all professionally done .. had performance torque converter built An matched to my cam specs an all high performance heavy duty parts internal as well as stage 2 shift kit new pan new trans cooler bigger than stock one .. man oh man does it shift An work sweeeeet !! Chirps wheels in second An third when gettin on it !! An what a difference in power an take off ,it jus makes that speedometer dance up to 100 mph in a flash .. she has 392 rear posi too.. guess you can say I treated myself, as today my 51st birthday too.. keep these videos coming I really enjoy them !!👍👍

Hell yeah badass . I just finished on my rebuilt I have an 07 charger 5.7 the rod bearing spun on the crank and did a lot of damage. 1 1/2 months later the engine is back in the car and I’m doing her first start up today.

"Heh heh. He said polish the crank. Heh heh" - Beavis and/or Butthead

Holy Frick, Those pistons are cheaper than a set of KBs for my old magnum!!!!!

What makes the 5.7 hemi look like two V4 engines back to back

What bolts did you use to mount the engine block?

I'm going to try it right now I can actually even cut the Piston off because all I need is the rod but I'm not going to do that I'm going to try to use my ball joint press and a torch

My 2006 ram procharged ram spun a rod bearing. Currently there isn’t any rebuild(forged) engine offered. I might have to rebuild myself considering a lot of machine shops are not taking any work because they’re backed up. Crazy times we’re living. Bores look good. I plan on going forged Manley stuff. Are installing forged units more complicated than a regular rebuild? I am comfident on doing it myself just want to make sure if I’m going to spend $4k in parts I don’t destroy motor.

I have a question I have a 2004 dodge 1500 hemi will pistons from a 5.7 2009-2021 fit in the engine due to the compression being 10:5-1 on the newer engine and the older being 9:5-1

Perfectly palished. 😂

Did y'all ever get the hemi put back together? Any more goodies installed?

I looked for the link on the dnj pistons can't find them. What's so special about these pistons compared to the stock replacement? The pistons on the newer 5.7 are all the same all that changes is the heads and the squish area that's why compression bumps up eagle heads compared to earlier models. I'm gunna be running 6.1 heads with a home made 5 layer mls from the stock gasket it works they say. But my question stands what's the difference in the pistons

So I just want to point out and im not bashing this video at all but a warning when you said that the writing on the rod goes to the opeset of the arrow on the piston that this is not the case on my hemi and I followed your video and ended up having to push them all back out and put thenm in the right way facing to the front just thought I'd let you guys and other people know that might use this video for a reference that it is different on some hemi's thanks for the video

I just dissambled a 2017 5.7 hemi, the connecting rods were not installed with the printed letters opposite of the arrow... as a matter of fact, they, "digital print" was randomly facing. So, I am installing the wrist pins for this and just make sure that the digital print is facing the opposite way of the arrow on the piston right?

What is dis.of piston

So how do you find the ebay stuff holding up. My 5.7 dropped a valve and I cant find one around were I live. Liking about one of the Amazon kits anyone do that

What is the measurement of piston diameter and lifter for a 2010 5.7 engine

Why all the commenters beating around the bush? Fluffy was in the corning polishing his shaft. Replay the tape. 😝

How did the DNJ pistons hold up? I just got some for my turbo build.

Hey does those gaps work for stock, I gotta change out the rings. New to this thanks in advance

I have a 2011 ram 5.7 hemi st the engine was sitting in the rain so the Cylinder walls got rusty i tried honing but it to far gone so I was thinking of boring it over to fit a 0.020 over pistons the question is can i keep the same 5.7 crank along with the stock camshaft lifters I'm not looking for more power then it already has stock i seen people put 6.1 crank when they go oversized to 0.020 i cant return the 5.7 crank i bought so thats why i was wondering

can i mix the piston? or does it have a certain position to sit?

Can we call this project, “ drill bit”

Did you use the same connecting rods? Or bought new ones

How much would a machine shop charge to install rods and pistons

You should really correct your video on direction of the connecting rod and pistons

Don’t let this video hit 100,000 likes 😂😂 jk love the content but don’t do it please 😭

Where is the video for measuring bearings Great info

Arron Paul's brother?

Twin turbo it now! 1000hp or bust

I always wanna do a rebuild like this, then boom a couple grand gone

My hemi start a tikin noise

How much hp

Once she’s all back together maybe engine dyno time? Fluffy in a bikini 🤔