5.9 Cummins 24v Dodge RAM Gets A Body Swap

Рет қаралды 371,030

6 жыл бұрын

In this short series, we show you how to do a crew cab body swap on a 2nd Gen Dodge RAM Cummins 24v!
debossgarage.com
Merch, Tape Boss & Car Parts debossgarage.com/store
Tools I like kit.com/debossgarage/dg-toolbox
Show us your build project debossgarage.com/drivetribe
Help us make awesome stuff / debossgarage
Twitter / debossgarage
Instagram / debossgarage
Facebook / debossgarage
*If the video was helpful, please give it a "thumbs up" and consider subscribing.*
Theme Song: "Travelin'" by SWIB ( / swib-1 ) CC BY-SA 3.0
All Songs: / deboss-tunes
Music License: share.epidemicsound.com/deboss (30-day free trial)
NO WARRANTIES: All of the information provided in this video is provided "AS-IS" and with NO WARRANTIES. No express or implied warranties of any type, including for example implied warranties of merchantability or fitness for a particular purpose, are made with respect to the information, or any use of the information, in this video. DEBOSS GARAGE ("DG") makes no representations and extends no warranties of any type as to the accuracy or completeness of any information or content of this video.
DISCLAIMER OF LIABILITY: DG specifically DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES and assumes no responsibility or liability for any loss or damage suffered by any person as a result of the use or misuse of any of the information or content in this video. DG recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. DG assumes or undertakes NO LIABILITY for any loss or damage suffered as a result of the use, misuse or reliance on the information and content of this video.
USE AT YOUR OWN RISK: This video is for informational purposes only. It is your responsibility to evaluate your own safety and physical condition, or that of your clients, and to independently determine whether to perform, use or adapt any of the information or content in this video. Any automotive repair and/or modification may result in injury. By voluntarily undertaking any task displayed in this video, you assume the risk of any resulting injury; your safety is the sole responsibility of the user and not DG.

Пікірлер: 458

@fernandomcc7954 5 жыл бұрын

The first time I saw this truck was back in 1996 in the movie TWISTER. A brand new clean red Dodge Ram. I was a kid and I said "that's my dream truck". I loved it back then, I love it now!!!!!

@brandoneverts9003 4 жыл бұрын

Fernando MCC that’s my exact story as well seeing it still running at the end all beat to shit really made me want one! My first was a 97 ram 2500 12 valve and then I had a 2002 ram 2500 24v I want another one badly

@nolanmitchell7319 4 жыл бұрын

Wow I can relate to that perfectly I think I cried when it got destroyed

@adriananoelle4699 4 жыл бұрын

Dad went out and bought himself one immediately after watching Twister. it still hurts to watch her get destroyed.

@scootersonlyrepair6773 4 жыл бұрын

I watched twister a couple days ago and noticed the truck. It has less than 1k miles in the movie. I have one now

@bigjmma6797 6 жыл бұрын

Man it is crazy you have to write a disclaimer to protect yourself for helping people out. No good deed goes unpunished sure says alot for the times we live in. . Love your videos.

@majorgreig1 6 жыл бұрын

deboss is deman nice to see people with common sense fix it right or just crush it take pride in your work

@Ashroyer86 5 жыл бұрын

common sense would say let that truck go.

@sourbrothers73 3 жыл бұрын

Deman?

@chikendagr8994 3 жыл бұрын

@@Ashroyer86 hes in canada so that's a low rust specimen

@kadenwatt2033 5 жыл бұрын

I was 100% expecting Gary to ram into the door with a forklift. Also loved the Ford dealership joke at 8:13 lol 😂

@aaronshensky9385 6 жыл бұрын

The multi colored body panels tell a story and give the truck character. Good work Deboss. I'm tired just watching all this hard work your doing. Thumbs up. Great vids as always

@hanskinslo326 6 жыл бұрын

"Carpet is stupid" - I can't agree more!

@ramtrucks721 6 жыл бұрын

Han Skinslo "In a work truck" he said

@hanskinslo326 6 жыл бұрын

RAM TRUCKS - He didn't say anything about a work truck, there..... but I get your point! I just think carpet is a bad idea in general, just my opinion.

@asherdie 6 жыл бұрын

Damn right! Clean shaven or a little landing strip.

@guy_incognito7538 4 жыл бұрын

@@asherdie smh

@asherdie 4 жыл бұрын

@@guy_incognito7538 you're welcome.

@562sb 6 жыл бұрын

Figured I would finally watch one of your videos after seeing you in other people's project car challenge videos. I'm liking it👌🏽

@bsideadventures2180 6 жыл бұрын

I've been watching y'all from the start. It's so nice to see a channel grow and them stay so humble. Thanks deboss

@nellyfarnsworth7381 4 жыл бұрын

Thanks for saving, another DODGE CUMMINS. BEST PICKUP IN AMERICA.

@dillonsalvo 4 жыл бұрын

Thank you for encouraging my 12 valve build!! Im in the cab swap process. With 280k miles shes getting the works done to the engine thanks for all your info!

@growingknowledge 6 жыл бұрын

Mate, you have so much energy. Don't know how you do it !

@1968IH 6 жыл бұрын

Fantastic video, just last weekend I pulled the service box and body off my dad's 2001 2500 cummins he bought new. Cab, fenders and doors were shot. Going to do some frame repair, paint it, brake lines, fix the leaks, rebuild the front end, put new exhaust on, then put a new cab on, swap the interior and wiring back in. Then top it off by putting the original box back on that's been in the barn since 01. Great video, learned a couple tricks about the doors but we are doing things much the same, I even pulled the cab with a tractor. Glad to be a subscriber now!

@jordonchristensen2520 6 жыл бұрын

Keep this build up! So excited to see what happens

@preferredcustomer3527 5 жыл бұрын

Yeah I bought a Cummins with a bunch of Dodge smeared all over it too.

@doctube2020 6 жыл бұрын

Couldn't stop thinking of the fork lift and dodge mishap video lol. Thanks for another great vid! Keep up the great work!

@alanack67 6 жыл бұрын

I did the same on my 94. It was a pain in the ass. Worth it though, way better than buying a new truck. Took about a week or 2 since I I painted the frame.

@spaghetts 6 жыл бұрын

"You'd swear this was a Ford dealership!" 😂😂

@oldcroneysgarage9739 4 жыл бұрын

I did not expect to see you here lol

@robglez 4 жыл бұрын

Lol

@joshbrowne8650 5 жыл бұрын

FUCK'EM!!! Do what you want! It's your shop, your channel! And YOUR projects!!! Keep up the work. Love the vids.

@terrygarvin1980 3 жыл бұрын

Thanks for your help with Cummins and common sense repair guidance. Love your channel.

@kevinz763 6 жыл бұрын

Ppl now days DON'T take pride in their work and do things right.....I hate working on stuff other ppl cobbled up and try to figure out what someone else has had their fingers in....You make AWESOME videos

@kevinsvideogameworldkvgw15 5 жыл бұрын

Not only do you do good mechanical work you also make good tv production

@bazilwreckerloughead 6 жыл бұрын

I'm glad to see your fixing it, most people would just scrap it. I'm getting old too, & out of shape; I get winded brushing my hair!

@FriscoBoatersGarage 5 жыл бұрын

I so want to do this swap! Been thinking about it forever!

@isaidwhatwhat5276 6 жыл бұрын

I loved my 2nd gen as much of a p.o.s. as it was. Trans went out at 60k miles, cant remember how many vacuum lines i went through. Had to rebuild motor at about 120k miles. 2 fuel pumps 40k apart (thankfully very easy in those trucks). But for some reason i still loved that thing.

@Rockport1911 6 жыл бұрын

Million mile engine in a 100.000mile truck..... sadly fits perfectly

@whitemale2248 5 жыл бұрын

If a dodge is a 100k truck then fords and chevies are 10k trucks.

@johnr4821 5 жыл бұрын

@@whitemale2248 he's talking about the body & interior (perhaps some other things) which I have to agree is inferior compared to GM's & Ford quality wise, especially the 2nd gens. I love the Cummins engines & even look of their trucks but they have been known to fall apart w/ the engine still running strong.

@whitemale2248 5 жыл бұрын

@@johnr4821 I work at a scrap yard and im not bias, ill drive whatevers best. I dont drive chevies because of there front end, electrical problems, and bad transmissions. i dont drive fords because general quality is very poor, weak frames, most of there gas engines have lots of problems and have wierd designs, and all there diesels past the 7.3 are a money pit. Best truck is a dodge frame (past 94) cummins, nv5600, dana 80 rear dana 60 front axle. so just buy a dodge and replace the body every 20 years and yer good. And yes the body will last 20 years, i live in the snow belt and my 01 dodge is just starting to get some wholes in the rocker panels and fenders.

@mrnobody8540 5 жыл бұрын

@@whitemale2248 All makes and models have problems - some even from time of day or day maded - it's has a lot to do with workers or manager attitude, that also means the sub surplier Quality

@whitemale2248 5 жыл бұрын

@@johnr4821 Are you serious? who cares about the interior or body. Either way 2nd gen dodges from the 90's have way nicer interiors then fords and chevies from the mid 2000's. Shittiest chevy interior i ever seen was in a 2008 1 ton.

@DrGand 6 жыл бұрын

Haha that's what happens to dashboards here in the south! When its 90 degrees+ outside for 11 months out of the year :P

@ashtoncraft6345 5 жыл бұрын

Glenn all dashes in south Mississippi curl up or crack if you don't have them under a garage. Lol

@captaincaveman471 4 жыл бұрын

Same with the Silverado dashes here in Texas.

@timothywells3908 4 жыл бұрын

It’s just dodge 2nd gen dashes man

@scootersonlyrepair6773 4 жыл бұрын

That's just 2nd gen dashboards. I'm in oakland ca and every dash I have ever seen is cracked.

@scootersonlyrepair6773 4 жыл бұрын

They sell them on ebay for waaaay too much money

@vflrockytop 6 жыл бұрын

I'm so glad I live in the south. My 96 is still immaculate minus a new paint job and a new dash.

@SW3434 6 жыл бұрын

Would love more diesel tutorials man. Great videos! Awesome to see your channel exploding!

@darebear2438 6 жыл бұрын

That intro was hilarious

@josephatnip2398 4 жыл бұрын

I've been watching your videos for like a day now just discovered your channel you have a new subscriber

@richardbates2367 Жыл бұрын

Beautiful paint schemes the dark metallic blue passenger door and the burgundy and silver cab.

@AllenSpeck 6 жыл бұрын

I love your videos and your sense of humor.

@tbone6005 6 жыл бұрын

Very informational! I have an early 98 2500 6bt nv4500 np241 Dana 80 srw Dana 60 long box extended cab , that I'm about to start a cab swap on, come this spring. Love the video's! Full of very useful information that I have applied in my shop. Thanks again!

@rondyechannel1399 4 жыл бұрын

From someone the lives in the desert side of Oregon, I can't believe the rust damage you folks deal with! I have 50 - 60 year old trucks here with no rust. '57 Studebaker Golden Hawk I'm restoring, no rust, my '57 Chev 3100 napco, no rust, oh my.

@duncanmcleod4459 2 жыл бұрын

Thanks for restoring her

@DeezNuts-xo2ee 5 жыл бұрын

Dude you are the most thorough wrencher ive seen wish you lived close to me

@advancednutritioninc908 6 жыл бұрын

I live in Georgia and have enjoyed blown out interiors here as well. But at least we don't have to deal with salt damaged cars. You do great work!! I wish you were within 30 miles of here. :) Liked !!

@leol1682 6 жыл бұрын

Love the video man ,love Dodge ram too.

@darth_taterz 3 жыл бұрын

@deboss garage damn shops looking minty fresh in 2021

@canadacatalyst 6 жыл бұрын

Tow mirrors a must!

@Sobriety5424 4 жыл бұрын

Here down south we scrap great trucks that need motors. Breaking my heart every time I see a mint dodge dually with a blown 360 sitting in the crusher

@BeetsbyJake 5 жыл бұрын

Dude. Nice GTO!!!

@baylonjones3771 6 жыл бұрын

Love videos like this! More diesel!! Also I have a 2nd gen cummins so I learn alot of stuff too. Even if it's about some dumb clip on an interior peice

@bikesyo6343 6 жыл бұрын

Holy shit you work fast, or is it just the illusion of the recording

@Music10161 6 жыл бұрын

That's why you set the shot lines to the rear door then adjust the front fender to the front door

@noostroi 6 жыл бұрын

"I swear, it's never done that before!" XD

@darinwardwell1583 5 жыл бұрын

keep doin what your doin good job!!!

@tanmelons 5 жыл бұрын

Can you do a video on how to "stand alone" wire a 24v to run on an engine stand?

@noahd4039 6 жыл бұрын

I know what you mean about the dash falling apart the sun is brutal down here in Georgia 😂

@benjaminpeterson1797 5 жыл бұрын

same. i bought a texas truck and the dash literally broke apart when i pushed in the headlight switch.

@SethLikesToEat 4 жыл бұрын

@Varnce Yes, but it's worse in the Southern United States than in Canada because of there being that much more sun.

@jerrybrandt9377 5 жыл бұрын

In floor heat !!kick ass!! But hard not to fall asleep on creeper ! Especially in morning.But love how floor is never wet! Wealthy folks in my area have heated driveways so the snow and ice never has a chance.

@halw3058 6 жыл бұрын

Love the videos and the Dodge looks awesome mismatching. I also am wondering what where the tires size and rim size on that truck in the video? Thank you for the videos

@MsPokemonsoulsilver 4 жыл бұрын

they make trim tools for those little christmas tree wire holders you know. you don't always have to just smash your hand haha

@spencerruthman8065 5 жыл бұрын

Wow this is crazy to see so much rust where I live you never see a truck with rotted out wheel wells crazy what salt does!

@TheBrokenLife 6 жыл бұрын

I just finsihed banging a new radiator (which was the cheapest one available on Amazon, which made it the cheapest one available anywhere) into my daily and was quite pleased to see it was made in Canada! I hope the guy that was working on that truck didn't take a job at the rad factory... :/

@robbypalmer5262 6 жыл бұрын

I love the constant ford mockery

@scottycollins131 6 жыл бұрын

Those subscribe numbers are moving up! I live in Mississippi. The sun is brutal down here! Good luck at the speedway!

@crabwalkarms7347 6 жыл бұрын

Scotty Collins i live in MS as well

@scottycollins131 6 жыл бұрын

david mincy Cool. Deer hunt?

@1982MCI 6 жыл бұрын

Scotty Collins hey Scotty, my wife’s from MS and all her family is still there in Hattiesburg and Jackson areas. I lived in Columbus ms when I met her 25 years ago. Brother in law is in Hattiesburg and he’s a big deer hunter and we are now in central NC and we deer hunt here and have some pretty awesome deer right around us

@time1800 5 жыл бұрын

You should see what those Dodge dash look like after baking in the Texas heat!

@chadfoust6942 6 жыл бұрын

I so wanted to see another forklift smash! Great intro, and that bit about the mirrors... LOL! I swear thats never happened before LOL! I would love to see you put a p pump or rotary pump on a 24-valve truck for all those guys with CPU woes

@DEBOSSGARAGE 6 жыл бұрын

It is in the works for the Silverado. I wish we could just swap the head but because the injector location, its easier to put a P-pump on a 24V then a 24v on a P-pump.... Working on it though

@stockprerunner5277 5 жыл бұрын

it’s so weird seeing rusted ass trucks because i have never seen a super rusted truck in vegas

@CockOfTheRock 6 жыл бұрын

A good idea would be to use the 99 front bumper. Always thought those looked better.

@40gp 2 жыл бұрын

Pretty damn entertaining dude! Sub’d👍🏽

@ranjanty Жыл бұрын

You make it look so easy. I'm dreading putting my 99 ram 2500 back together and it's just the front end and fender, bumper, hood. but I'm 68.

@ThePete2432 6 жыл бұрын

Lol the last ford I had got the cab removed 3 times... never been happier to hit a tree and total a vehicle in my life

@wolfmanrebel874 5 жыл бұрын

Yes, it's interesting how so many lemons end up in trees and lakes, charma I suppose, lol

@CarswithNash 6 жыл бұрын

They make tools for removing door panels, those plastic clips should come off with the panel, you need to pop each clip with a tool or you can cause stretch marks in the outer panel. The same with those clips on the wires, they come out with a flick of the wrist with the right tool.

@lewerim 5 жыл бұрын

Because carpet is stoopid... Yes!

@mikec3142 6 жыл бұрын

Nice job, We gotta do that to our dually. Cab corners are getting bad.

@jacksmith3189 5 жыл бұрын

I enjoy your videos

@RollinShultz 5 жыл бұрын

I bought my 01 2500 at auction and the previous owner (carbon county public works) did not take care of it. It has only 81k miles on it, but it was used exclusively as a plow vehicle here in PA. I had to change the heater core and when I pried back the dash, I found it was terribly rusted. They had run the truck with a leaking heater core and allowed the corrosive coolant to splash all over the steel dash carcass. They also let it leak into the blower motor until it caught fire and stunk up the truck like burned wires. The dash came out in 20 or 30 pieces. I decided to remove it completely since the plastic was garbage anyway so I could sand blast and paint the metal skeleton. I am glad I did that as I intend to customize the dash with fiberglass and make a nav/media player with gauges with a Raspberry Pi and 10" screen and I need to move some of the duct work anyway to mount it in the center.

@dakotadomination1065 6 жыл бұрын

If you do get a two post lift and move your 4 post. They would make great videos. I like to see an install of them.

@Muisak 6 жыл бұрын

Greetings from tennessee! :)

@FletchersGarage 6 жыл бұрын

Love seeing the GTO in the back, my cousin just got his all together last year, all original 400 motor. Would like to see an update video/ walk around of the project!

@DEBOSSGARAGE 6 жыл бұрын

Mercedes LS swap is back in progress and then full tilt on the GTO. We found someone to paint it finally

@FletchersGarage 6 жыл бұрын

Right on man, looking forward to it! Cheers.

@poptop7637 6 жыл бұрын

The southern sun is really hard on interior plastic. Bodies do pretty good here though.

@arlenstrauch 3 жыл бұрын

Good video

@Erated78 6 жыл бұрын

Great video Rich. I'd be a fool to recommend you do a job a certain way or give you advice regarding fixing any mechanical thing besides, I know "You can tell a Dutchman, but you can't tell him much" LOL Cheers

@masonhall8496 5 жыл бұрын

1 Dodge is now abunch of Dodges. Reminds me of my dad's 80s ram charger he built

@jolee51282 6 жыл бұрын

WOW!!! that sexy Pontiac GTO in the background

@jacobrossetto9701 6 жыл бұрын

*Forklift smashes into side of truck*

@nou8257 6 жыл бұрын

YZ250FJake comes out the other side due to rust

@israel1231 5 жыл бұрын

2nd gen 318 five.two 1500 98 235,+ Till the wheels fall off!

@SethLikesToEat 4 жыл бұрын

2001 with 270,000 + mi on it. I agree 100%. I have a 2015 Ford F150, and new Fords are junk. I say that not only because of experience with mine, but brand new Super Dooty ambulances we have at work. I'd much rather work on an old Dodge to and her going.

@patwregan 6 жыл бұрын

check the blend doors in the hvac box - they fail and are a pita to fix in the truck

@trythistv 6 жыл бұрын

Doing a very similar project, however I bought a rusty 96 dodge with a perfect 12v, and an 01 with a badly knocking 360 v8 that looks like brand new underneath, a little clear peeling but that just matches all my other vehicles. So the engine, trans, t/c, axles and suspension all came off the rusty diesel and is now in the gas frame/body. the main pain was wiring. its coming together though, trying to make a few videos of it soon.

@markm0000 6 жыл бұрын

Nice! That truck is going to last you a long time. New body style and interior with the best 5.9.

@donsorrells2552 4 жыл бұрын

I live in Georgia and the summer sun is killer on plastic

@Wesshaw1996 6 жыл бұрын

Lmc makes a dash that has UV inhibitors in it so they won't get that away it ain't much it's always worth doing if you got to pull the dash on a Dodge

@brandonmyers6577 5 жыл бұрын

I work at a junk yard we have zero dashes they are all exploded!!😂😂 I'm in Indiana must be the sun that roasts them

@richardbates2367 Жыл бұрын

Cool that has the brown interior mine has the two Chrysler light and dark mist grey and the rainbow thread design seats and door panels but I can't complain it was a nothern Ohio truck since new, I have solid floors a few spots over the wheels on the bed and the tailgate is solid but the top is bent in the right corner, and the bed floor right up in front of the tailgate has three spots rusting through factory no bedmat, bed liner or camper shell.front fenders are rotted over the wheels and starting behind the doors so I plan to get two good gloss black front fenders used, and the front doors are decent but the wrong doors,it has regular cab or club cab doors on my quad cab 2000 Laramie slt 1500 it was a lower trim level truck the doors came from audio latina speakers and two wire speaker plug my truck has 8 wire plug. Rear doors have a little rust on the bottom and the rockers on the outside are rusty but the door jamb rocker is firmly attached with no upper holes so... And I have a complete set of stainless steel brake lines for my truck from classic tube out of Ohio $209

@caterpiller95 6 жыл бұрын

first comment really makes me wana fix my second gen cummins but I don't have a nice shop so its gotta wait till summer

@2oe1dirtfiend 3 жыл бұрын

Nice video quick question how long did the swap take?

@tonyc1441 4 жыл бұрын

Hey Rich, had a set of those cool flip out mirrors on my 2008 3500 & they where cool. My 17year old son felt they reached out to far and clipped one on transit bus. Shattered! Forced to use those 1/2 mirrors bcs the streets in Vancouver do not like teenage boys!

@josephatnip2398 4 жыл бұрын

My dream truck is a 1976 Ford two wheel drive that has spent its entire life in South Texas (no rust) ..... With a Cummings Diesel 12 valve swap and an Allison transmission....... And the price of new trucks are getting so ridiculous it's to the point now it's cheaper to build my dream truck then to buy a new truck

@aa999xyz 6 жыл бұрын

looks like you got about five trucks in the one? I could understand replacing the box or fender but the price of replacing the whole body labor wise?

@hawkie333 5 жыл бұрын

I had that same dash, it was like potato chips!

@jeffreyturner6262 5 жыл бұрын

Man I need a set of those white/silver doors

@seanrewerts8927 6 жыл бұрын

have you seen any of the powerstrokehelp videos? If so, what's your opinion on the lifetime dealerproof?

@sevenjohn9565 4 жыл бұрын

Your doing great don't let the a holes tell you how to do your job

@RobertKohut 6 жыл бұрын

Nice!!

@MyNameNotRickB 6 жыл бұрын

Yayy its summer !!! ohh shit never mind loll ...

@jezza2253 6 жыл бұрын

Would you consider a 5.9 Cummins buyers guide? What you like and dislike about the different years? 12v v 24v? And if there was a year dodge that was preferred? I’ve always heard the last years for the 2nd gen dodge were some of the best, but I’ve seen plenty of people who prefer the 12v. Interested in your opinions.

@chrisdobek1462 6 жыл бұрын

Jezza I’m willing to bet money I’ve seen him cover this exact question in a dedicated video

@nou8257 6 жыл бұрын

24v 2nd gen from 1998.5 to 2002 has the vp44 injection pump they blow decently often but 1994 to 1998 have the 12v which doesn't have that problem but will need the killer dowel pin fix

@jezza2253 6 жыл бұрын

If there is a video, please share! I couldn’t find anything in particular. I’d like to know what Rich thinks. My 300d has a manual style IP and my 340k mile VW TDI has the electronic IP. Both work flawlessly and so what are the pros/cons for a Cummins? What about the dreaded 53 block? Later year dodges had more options like 4 wheel disk breaks, etc., so what about other features?

@markm0000 6 жыл бұрын

My vp44 makes nasty noises sometimes. It's time to ditch it and move onto a newer truck.

@nou8257 6 жыл бұрын

To check for the 53 block poke your head into the wheel well of the truck in front of the tire and look at the block on a 2nd gen 24v it should have a casting number telling you if its a 53 or not on the side of the block. On the injection pumps vp44 is just a all around crap injection pump they fail quite often and when they do its almost $2,000 to fix the pump if you buy a new replacement. The 12v trucks had either the Ve pump or the p7100 pump. A p7100 pump is know as the p-pump and is the best one you can have horsepower wise and reliability wise. On questions that are not engine related I can't really help answer as most of my knowledge is of the engine not the body or drive terrain.

@fulmerjw 6 жыл бұрын

They should've recalled the trucks over that. I've had 2 of them, a '94 and a '99. Both dashes shattered. It's not the sunlight or the heat, it's the bad chemical makeup of the plastic itself.

@alanrowley6402 3 жыл бұрын

About to do a cab swap on my 98 already put everything else of an 01 on it box front fenders hood doors. Have the cab off the donor truck but worried about the complications swapping a cab from an 01 v6 2wd on to a 98 v8 4x4 once its done I'll have a brand new looking 2nd gen. So far I've built the whole thing for less then $5000 including buying tools