24v Dodge Ram Transmission Problem Fixed With Eaton Fuller Swap

Рет қаралды 402,838

5 жыл бұрын

How do you solve the notorious RAM automatic transmission problems? With an Eaton Fuller 6-speed.
Subscribe: bit.ly/SubDeboss | Merch: debossgarage.com/merch
Watch next, “I Bought A Ford!” • I Bought A Ford! | #FT...
Patrick shows us his FS5406A 6-speed synchronized Eaton Fuller transmission swapped 24v Dodge Ram! #DebossNation
Follow Deboss Garage:
debossgarage.com
/ debossgarage
/ blackjackdeboss
/ debossgarage
/ debossgarage
Send stuff to "DEBOSS GARAGE"
411 Darling Rd, Canfield, ON Canada N0A 1C0
Other links:
Merch, Tape Boss & Car Parts: debossgarage.com/store
Tools I like: kit.com/debossgarage/dg-toolbox
Show us your build project: debossgarage.com/drivetribe
Help us make awesome stuff: / debossgarage
Watch More Deboss Garage:
bit.ly/DG_EngineSwaps
bit.ly/DG_AutoShows
bit.ly/DG_Reviews
bit.ly/DG_HowTos
bit.ly/DG_QuickTips
About Deboss Garage:
From American Muscle to Classics to Diesels, DG will show you how to build, swap, and repair anything with a throttle.
*If the video was helpful, please give it a "thumbs up" and consider subscribing.*
Theme Song: "Travelin'" by SWIB ( / swib-1 ) CC BY-SA 3.0
All Songs: / deboss-tunes
Music License: share.epidemicsound.com/deboss (30-day free trial)
NO WARRANTIES: All of the information provided in this video is provided "AS-IS" and with NO WARRANTIES. No express or implied warranties of any type, including for example implied warranties of merchantability or fitness for a particular purpose, are made with respect to the information, or any use of the information, in this video. DEBOSS GARAGE ("DG") makes no representations and extends no warranties of any type as to the accuracy or completeness of any information or content of this video.
DISCLAIMER OF LIABILITY: DG specifically DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES and assumes no responsibility or liability for any loss or damage suffered by any person as a result of the use or misuse of any of the information or content in this video. DG recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. DG assumes or undertakes NO LIABILITY for any loss or damage suffered as a result of the use, misuse or reliance on the information and content of this video.
USE AT YOUR OWN RISK: This video is for informational purposes only. It is your responsibility to evaluate your own safety and physical condition, or that of your clients, and to independently determine whether to perform, use or adapt any of the information or content in this video. Any automotive repair and/or modification may result in injury. By voluntarily undertaking any task displayed in this video, you assume the risk of any resulting injury; your safety is the sole responsibility of the user and not DG.

Пікірлер: 706

@DEBOSSGARAGE 5 жыл бұрын

Want to see your ride on the channel? Submit your project here: debossgarage.com/nation

@jassymarcoscassol7220 4 жыл бұрын

Tem tradução pra português

@cliffweatherbee6914 4 жыл бұрын

I doubt you'll be coming to Arkansas, but I submitted it! Lol

@alvarogeorgenobregeorge69 4 жыл бұрын

@@jassymarcoscassol7220 tem não ele trocou a transmissão automática por uma 6 marchas , e o Riche perguntou sobre a de 10 marchas o cara falou que até penssou mais teria que lidar com ar para a transferência e o resto e falando sobre quantas milhad por galão ele disse ficou em torno de 20 mpg o galão americano são 3,07 litros o resto é sobre se fosse puxar cargas pesadas etc espero que tenha ajudado .

@jassymarcoscassol7220 4 жыл бұрын

Muito bom E á relação de marchas ficou Boa ou ficou curta

@alvarogeorgenobregeorge69 4 жыл бұрын

@@jassymarcoscassol7220 sim alguem fez esta pergunta porquer não usou a original e o rich respondeu é que esta caixa tem overdrive=uma 6 louca como se diz aqui.

@luisito7133 4 жыл бұрын

"You've driven 18 speeds" "Yeah yeah ... Not legally but yeah" lol!

@Morpheen999 3 жыл бұрын

As said by most rural living Canadian men

@benjamins9121 2 жыл бұрын

@@Morpheen999 Or most farm hands. As a teen I drove one during harvest all day every day, from the field to the co-op and back, then again and again. At that point I didn't even have a regular license. Out in rural Kansas the cops tend to leave you alone as long as you're at least 14 and you're working. Obviously you cant take it on the turnpike but if its just down the highway 10 or 20 miles you're ok. This was quite a few years ago however

@AnarchyEnsues 5 жыл бұрын

its like jay lenos garage, but with normal people and cooler cars.

@kennedy796 5 жыл бұрын

I dont know about cooler, jay has some really interesting units. But rich is more your type if your into diesels and custom builds on them

@tomlucasrccrawlers9108 5 жыл бұрын

Perfect comment. Hahaha

@chapie62 5 жыл бұрын

Leno has the ultimate collection but hes also filthy rich unlike everyone else

@paullanier8280 4 жыл бұрын

@@chapie62 mr. Jay got his start in a garage doing what he loves. Incidently, he has made a successful entertainment career by his pleasant personality. Anyone can achieve riches. Work at it with a focus.

@kyboy5 4 жыл бұрын

Jay lenos garage is good to why you shitting on Jay

@illiaflannery7312 3 жыл бұрын

I think this is my favorite truck that Rich has featured and probably my favorite truck on the internet. Just really love the simple honesty of it all. Just something a mechanic threw together for his daily bc he was done with the stock trans, not some money bonfire flex machine. Just love it.

@96xl1200c 2 жыл бұрын

Money bonfire flex machine, I'm adding this to my daily Vocabulary

@pyro323 5 жыл бұрын

Cummins and coffee with Rich...nice

@moose2934 5 жыл бұрын

Who'd want to cum in another man's coffee? Had to do it!

@dariocarafa3788 2 жыл бұрын

For anyone wondering why the headlights are doing that it's because the control unit uses a pulse width modulator to control the headlights and that means that the lights are technically flickering at an extremely fast rate and that coincides with the frame rate of the camera in a way that makes it look like it's flickering like that

@brokebikemtb4448 4 жыл бұрын

You can tell a true enthusiast by the convo....rich truly wants to know the details...because it's that awesome

@gyozajoe 5 жыл бұрын

Showing the international viewers how to do trucks and coffee the Canuck way!

@ruralrider9961 5 жыл бұрын

Best way to make a Dodge reliable? Swap in as many non-Dodge parts as possible.

@bigbossman5969 5 жыл бұрын

don't forget all the junk that ford and gm makes

@ruralrider9961 5 жыл бұрын

@@bigbossman5969 Found the Dodge guy.

@tylerbaldwin1633 5 жыл бұрын

still better than a ford tho.

@jeffrey717 5 жыл бұрын

The rest should do the same

@bigbossman5969 5 жыл бұрын

@@tylerbaldwin1633 exactly ford is some over rated junk. they just advertise more and do more fleet sales. that's why the value of their trucks loose more valuable than the rest when they are used

@zabnat 5 жыл бұрын

8:02 " I’ll have two number 9s, a number 9 large, a number 6 with extra dip, a number 7, two number 45s, one with cheese, and a large soda."

@noelcr1056 5 жыл бұрын

Rip big smoke

@curdmalurd5805 3 жыл бұрын

"Gotta eat to keep your strength up man"

@bigwhane8603 5 жыл бұрын

Do more of other guys trucks this is dope

@DEBOSSGARAGE 5 жыл бұрын

If you built it, we will showcase it!

@bigwhane8603 5 жыл бұрын

DEBOSS GARAGE can’t afford a first gen yet but when I do oooh I’m driving up there from Minnesota

@tlr-nut7275 5 жыл бұрын

@@bigwhane8603 If you drive up there, you'll end up in Manitoba! Rich is south-east of you.

@tlr-nut7275 5 жыл бұрын

@@DEBOSSGARAGE If your near Ingersoll sometime Rich, pop by! I've got a '68 crew-cab Power-Wagon I think you'd like. Maybe do a 12-valve swap for me.

@bigwhane8603 5 жыл бұрын

Balazs Konya rich is in Canada

@Down4Denver 4 жыл бұрын

A non OD unit can be converted to OD by essentially swapping out the last 2 gears . Contact Pro Gear and tell them what you're doing and they will set you up. Much cheaper

@CA.papaBear 2 жыл бұрын

Wait, you mean the fs5406a or the 10/13/18 speed eaton transmissions? fs5406a or Fuller Syncronized 540 (or 500) ft-lbs torque capacity, 0 (can't remember designation off the top of my head), 6 is the gears in the transmission. and lastly A is the ratio set. Don't know the ratio set, you'll have to look up the eaton transmission document for that. Fuller Syncronized - 54 x 100 (or 540ft-lbs) 0 (unknown to me at this time. 6 speed A (ratio set) or FS-5406A. (forgive me, I like to be verbose.)

@techmanja Ай бұрын

@@CA.papaBear na verdade o segundo conjunto de numeração é o "06" ou seja, 6 marchas, outros modelo tem "18" "05" assim por diante

@nickfrumusa7705 5 жыл бұрын

I have the overdrive version of this transmission in my f 450 behind my 12 valve cummins. I have the fso-6406a in my truck and have been running it for 6 or so years with not one issue. I had some challenges putting it in my old 97 ram 3500 and getting it to fit but I have not had to take it out or rebuild it since. About 2 years ago I built my f450 and installed the 12 valve and the Eaton in that and it has made two trips back and forth from new York to san diego no issues. You can also find a sae2 adapter plate with the starter on the passenger side that is what I'm running. Awesome to see another guy do this swap!

@randyharms2307 5 жыл бұрын

That is the coolest thing i have heard of. I love the cummins. and ford body and interior are the best but im not a fan of the transmission in iether of them. How much would you sell your truck for?

@nickfrumusa7705 5 жыл бұрын

@@randyharms2307 I couldn't sell it since I have put way to much time in it. I do have a friend that probably would build one for the right price

@kennedy796 5 жыл бұрын

@@nickfrumusa7705 thats a lot of words for its mine i like it lmao. Seriously though ford builds the best cabs.

@johnmorris7960 5 жыл бұрын

I attempted to do a conversion to my Ford F800 hauler and I never found the exact 6 speed fuller I was looking for. I wanted an overdrive model. I ended up putting a Fuller RTO9513 behind my 8.3 Cummins. That's a 13 speed with 1 overdrive. These are the simplest transmissions to work on. Complete teardown/overhaul manuals for each model makes it easy. I overhauled mine by myself. My 8.3 was a p-pump model with about 50 hp added. I had about 260 hp total. Before turning the fuel a little it was a dog. The internal mass of gears you are spinning all the time eats up power quick with 9, 10, and 13 speeds, even with the 8.3 for power. Complete transmission setup weighed 1200 lbs. You don't want to drive a dual range transmission everyday. A 6 speed like this can be fit to a regular style transfer case if a person has a machinist friend to help. Pro Gear in Florida helped me with part numbers because I could not find anyone that had ever done the 13 speed conversion. I used a SAE 2 bellhousing and a 14" x 1 3/4" two disk pull type clutch with no issues at all. Clutch part number CCA-9724. I used flywheel 3908574-04 with ring gear 3908546. I can't find the starter number but it was stock for the 1997 F800 with Cummins 8.3. Truck weighed 14,750 and my trailer at 15k. Truck pulled decent but a stock 6.7 with Aisin would kick its butt. A 5.9 is not big enough for a 9, 10, or 13 speed. Later transmissions will be very big compared to my 9513 that was already too big. Do the research guys. Get a version with helical cut gears. My straight cut gears were loud. There are hundreds of variations of these transmissions when you go to the Eaton Fuller website with crazy gear ratio options. Fuller has a great website and grimmjeeper.com has the gear ratio calculator. You can never research these one off projects too much.

@johnmorris7960 5 жыл бұрын

I have actually seen the NP205 gear drive tranfer case clocked a few degrees from level to lower the amount of drop to help a little with clearance. For guys wanting a right side feed divorced t-case, in 1974 Dodge used a NP205 right side feed that was divorced. I am using one of those behind a NV4500 to power chevrolet axles.

@jeepindave5464 5 жыл бұрын

3rd gen shipping crate. Mint! 👌

@alabamamotionpictureproduc6626 5 жыл бұрын

Got to protect that Cummins, no ketchup for that baby.

@NathanielStauber 5 жыл бұрын

I learned to drive stick in my dad's factory manual Cummins from about '98. Automatics may still be getting better, but I'd rather have a manual.

@joe_kaiser2136 5 жыл бұрын

If you leave it hitting the diff that's just a factory installed automatic starter whacker so you don't even have to crawl under there with a hammer when it's being finicky ;)

@akfarmboy49 4 жыл бұрын

You made me laugh

@tuckerbrandstrom575 4 жыл бұрын

"Hey Tiny, come jump on my bumper, the starter quit!"

@burtsgurt 5 жыл бұрын

Love the Slave Lake reference!

@Nick-qj4su 4 жыл бұрын

Fuckin right bud

@wetsaltypickle 3 жыл бұрын

A little Cosby in a can and send her all the way!! MINT!

@imsobroke69 5 жыл бұрын

The big red 6 spd goat invades DG and rich is foaming at the mouth.

@kevinH7510 5 жыл бұрын

This was a pretty cool video! Two smart dudes talkin about things I wouldn't even attempt!

@calholli 5 жыл бұрын

My 7.3 F350 has the ZF-650 6 speed.. I pulled it apart and put new synchronizers in it.. Had to build a press with a 32 ton bottle jack to get the gears to come off the shaft. It was a fun learning experience. 230k miles on the truck.. Lot of miles left to go

@user-bg6gf3be7o 9 ай бұрын

Go do you like that trans

@calholli 9 ай бұрын

@@user-bg6gf3be7o Put synchronizers inside myself?

@leemer1 5 жыл бұрын

That body lift tho..I wonder if the hockey pucks have the Canadian Tire logo on it.

@laktix 4 жыл бұрын

I live in Europe, i watch every single video you post and i havent seen a cummins powered truck once in my life 😂😂

@jamesjarmon7383 4 жыл бұрын

there everywhere here.

@jeremiahgoodwin3408 4 жыл бұрын

That's so sad, I'm sorry for you

@jeremiahgoodwin3408 4 жыл бұрын

You'll probably never see an ar15 in your life either.. dam UK

@jamesjarmon7383 4 жыл бұрын

@@jeremiahgoodwin3408 An Ar-15, no. But a M-16 or M-4, very well may.

@jeremiahgoodwin3408 4 жыл бұрын

@@jamesjarmon7383 I think alot of the police and other branches out there use H&K mp5 mostly though

@asablack1364 3 жыл бұрын

Love these first hand reviews. You get it straight from the source with no BS.

@cumminsman4670 4 жыл бұрын

When I drive the 6 speed EMPTY I start in 2 then 4 & 6, makes it a 3 speed and that’s plenty Empty....

@gusthebus2542 3 жыл бұрын

In my 6 speed that means I gotta recline in 2nd to get to 4th

@Beandiptheredneck 5 жыл бұрын

I recognize that timmies! I had a buddy who always wanted to swap a 13 speed into his 08 Cummins. Love that he never took the auto shifter out lol

@oldcroneysgarage9739 4 жыл бұрын

Dude I found you once again

@dylan7228 5 жыл бұрын

I did this swap but did a mated transfer case. Works great and is a very strong setup. I have my eaton bolted to a 6.7 common rail. Mine is an FSO8406A

@dylan7228 5 жыл бұрын

Here is a walk thru video of it kzfaq.info/get/bejne/f7R1iceHupnHlKc.html

@dylanmedeiros3143 5 жыл бұрын

See this truck all the time around Fruitland road and on the QEW Sweet rig never knew it had an Eaton. Nice work!

@mechanickb4350 5 ай бұрын

Also a Heavy Equipment Mechanic. Great video as usual. Just a piece of advice. Eaton Fuller makes an FSO-6406 the (O) being OD with a final 6th gear ratio of .75 :1 The trans model number breaks down lke this: Fuller Synchronized - 640 ft lbs - 6 speed. Hope this helps. I have a 99 F800 with a 5.9 Im swapping the FS6406 to an FSO6406 to gain the OD. Got it on Ebay. Check often there are still plenty out there. You can also convert an FS to an FSO with some doing. Its not a really hard tranny to rebuild. Thanks again. You are my hero!

@bluebird5100 5 жыл бұрын

You guy should get all the parts together that it takes to perform the swap ,(mounting brackets and all) and start selling this as a complete kit on Ebay.

@jacknimble1 5 жыл бұрын

Or, do the swap step by step for us as an episode. Please.

@pkuudsk9927 5 жыл бұрын

@@douganderson7002 "Off road use only" and "at your own risk "are a good way around that. Most of the aftermarket use it. Along with no warranty .Anyone doing this would know modifying your truck is illegal in most places.

@mrnobody8540 4 жыл бұрын

@@pkuudsk9927 Illegal in your head - if I buy it- it's mine to do as I please.... The EPA registration is for the company that makes it.... any American that bends over to a wish I was a king deserves to eat shit.... I'm not against clean air - the research is simply this - the EPA clowns have design a Robbery Barron system into our system have an anti American mindset. It's he that can build a better 🐁 trap that builds jobs - not those who build shit and places a pretty bow on it as they pick the pocket of the consumer who wins.

@patriot2164 5 жыл бұрын

LOVE THIS VIDEO , Need to have more builders like him in and talk about the pro's and con's Again Great Video Thanks Rich

@thatmechanicguy8773 5 жыл бұрын

What an awesome project! Thanks for the video. Please do more videos like this.

@andywilliams1160 5 жыл бұрын

I used to drive a DAF 45 truck here in the UK & that had the 5.9 Cummins with a manual box, the electric power line/utility companies and military had 4x4 versions of that truck also. If you draw a blank on finding a 4x4 box in Canada or North America that may be a last resort. Love the videos keep them cummin.

@johnpublic5169 5 жыл бұрын

Cool video. Lots of helpful tips. Thanks. I'm looking to do a similar swap in a 1952 GMC 2 ton.

@Elbowgrease250 5 жыл бұрын

This guy must work in Stoneycreek! He passed me all the time on South service Rd!

@RadDadisRad 5 жыл бұрын

This is a fantastic idea and well executed. This is the perfect trans for a Sterling/Ram 4500 or 5500.

@kylesonsalla7620 5 жыл бұрын

A Spicer 6+1 would be much better...

@machinist7230 4 жыл бұрын

What about the Aisen 6spd that comes in them?

@nellyfarnsworth7381 4 жыл бұрын

@@machinist7230 You are correct. The New 2020 Dodge 5500 is rated to tow a 35,000 trailer, using the AISIN automatic transmission. Plus you can get 4x4. The AISIN is a MEDIUM DUTY TRUCK TRANSMISSION with two P.T.O. outputs. All HOTSHOT DRIVERS use AISIN.

@sierravortec2629 5 жыл бұрын

Just discovered this channel, this is awesome, especially being Canadian.

@pfleeger2010 5 жыл бұрын

Slave Lake don't need a catch can, because Slave Lake's radiator has been bone dry for years.

@AndrewBrowner 4 жыл бұрын

when you dont know what a catch can is but still get 45 likes... DOH!

@BillyBob-fd5ht 3 жыл бұрын

@@AndrewBrowner been there cold country

@HorsepowerTube 5 жыл бұрын

Yup I did this several years ago to mine.

@powersportzaddict4866 5 жыл бұрын

Canadian test drive: where to? Timmies eh! Hello from Fort Mac. Thanks for the vids.

@theeanonymousk7172 5 жыл бұрын

This is easily one of my new favorite episodes. So how long till you build one?

@ddgatewood71 5 жыл бұрын

She’s well used :) Awesome content as always.

@JakeRoy98 2 жыл бұрын

My Grandpa put an Eaton Fuller overdrive 10 speed in his first gen years ago. I like this 6 speed too!

@bdjm8595 4 жыл бұрын

Great video!!! Looking at the body of this pickup I was reminded why I'm happy to be away from that nasty road salt in Canada!!!

@matthewclarksr4605 4 жыл бұрын

I just watched the video and loved it I’m going to have to do some research for my 03 rams 3500 4x4 I keep blowing ATS 48re I’m ready for a swap to stick with overdrive and transfer cases

@electricamir248 3 жыл бұрын

Nice to see a manual conversion. I have sprinter van, gmc 3500, and civic on my list of manual swaps.

@rover215 5 жыл бұрын

Love this trans swap! I call it the Sick Speed

@nunyabinis 5 жыл бұрын

The manliness of this video is stupendous.

@bgd73 5 жыл бұрын

the riddle of the manuals. Nice swap. would be cool to find divorced transfer with high being beyond 1:1

@marshie1337 5 жыл бұрын

find someone who looks at you the way rich looks at patrick while talking bell housing. rich, you're a legend my friend. best wishes from texas

@davem3789 2 жыл бұрын

I have an 02 7.3 with ZF 6-speed and love that combo.

@johnpossum556 5 жыл бұрын

1:30 I love that wicked rolling shutter effect in the headlights. Too bad it wouldn't look like that in person.

@emeltea33 5 жыл бұрын

I thought it did... didn't consider that shutter effect.

@wobblysauce 5 жыл бұрын

I was looking at the Passenger window arm warping in and out.

@austinfouts9139 5 жыл бұрын

Thats leds for ya

@oldcroneysgarage9739 4 жыл бұрын

The dodge is blinking lol

@mikefedele4521 5 жыл бұрын

That is awesome! 👍 As for a transfer case... Look at the military stuff I bet they got some good stuff that will bolt up.

@hanskinslo326 5 жыл бұрын

Another great video, Rich!! Very cool.

@landykid 5 жыл бұрын

you can just tell in this video if you guys were not friends already you definitely are after this video..... great video

@adamfrance1237 5 жыл бұрын

I always chuckle at your videos cos we have the exact same hairstyle. Think it goes with the jobs lol

@montycrain5783 3 жыл бұрын

Very smooth shifting for such a big transmission.

@ricochetey 4 жыл бұрын

Yup I like using the clutch to shift my pickup and in my work truck 10spd I like to float.

@phillip_mcguinness7025 3 жыл бұрын

An Eaton 2 speed rear end would be neat in that. You can get them with the electric shifter.

@WeldWerx Жыл бұрын

To convert the fs5406 to overdrive you have to swap the input shaft and Swap out 3 gears 1 on the main shaft and 2 on the counter shaft and that converts it but your shift pattern is backwards in 5th and 6th. You have to swap some parts from a fso6406 shift housing to fix the pattern

@bottomowashington 4 жыл бұрын

This is a great style of video. Looks like fun. Large 2 cream too plz

@brentwilliamson1481 4 жыл бұрын

My factory installed 6 speed on 2011 Ram 2500 works pretty good!

@mannypuerta5086 5 жыл бұрын

For the clutch issue, I would give South Bend Clutch a call.

@SnapOffFilms 5 жыл бұрын

South bend is the way to go in my honest opinion

@nrs91 5 жыл бұрын

damn when you said Eaton Fuller I was thinking there would be some splitters or range change in there!

@daviddroescher 4 жыл бұрын

That SAE2 bell/motor plate will not fit into a 1st gen without deleting the heat and AC to allow cutting the firewall about 6 in up past the trans tunnel. Found this out when installing a medium duty Allison 1000 6 Speed. Im loving the dubble over drive. 55mph(88kph) is 1250rpm in 6th 100kph(62mph) 1425rpm. I went with a CA Conversations motorplate wiring and computer, and had the trans built to 1800tq by Hulon Fox Transmission in Dallas tx.

@jasonlacy280 5 жыл бұрын

The 10 or 13 spd trans swap does fit in a dodge frame pretty well. I have a 98.5 2500 with a eaton 13spd overdriven trans. It fit in pretty well with a little bit of a body lift. And with a dual disc havent had a slippage issues and it has 7 liters of CAT in front of it. I thought about going the same route with a six speed eaton but when you find a 13 for cheap why not? Never the less great swap and looks great.

@godspeedparadeteam 2 жыл бұрын

Sounds like a great transplant, I'm curious which transmission did you use? Pn#?

@jaredwitmer4836 5 жыл бұрын

Nice, I put a Eaton Fuller FSO-6406a in my F350. Even manged to do it with no lift. I am now running a divorced NP205 were my carrier bearing used to be.

@xmo552 3 жыл бұрын

Short rear shaft and long front shaft ?

@jaredwitmer4836 3 жыл бұрын

@@xmo552 yes, now I have a carrier bearing for the front drive shaft

@xmo552 3 жыл бұрын

@@jaredwitmer4836 Thanks. I've been considering doing a divorced 205 in something I've got brewing.

@WeldWerx Жыл бұрын

What did you do for the clutch release

@jaredwitmer4836 Жыл бұрын

@@WeldWerx made a bracket that mounted on the side of the transmission to use a puller cylinder from eastwood plumbed into my stock master cylinder. I drilled the stock lever that activates the clutch to mount the other side of the cylinder.

@joeziahbabb 5 жыл бұрын

I drive a road tractor and have been very interested in putting a medium nonsynced transmission in a light duty, I would prefer a 13 speed though, drives like a 8 speed usually but you can split the top end and they have a fantastic triple over drive.

@markm0000 Жыл бұрын

A triple over drive in a pickup would send it flying down a race track. I wouldn't be surprised if that could hit 150mph.

@Labrador_Iron 5 жыл бұрын

same trans I have in my 75 F250 cummins, you can switch them to OD pretty easy. change input shaft, countershaft drive gear and you swap the gearset that used to be 5th that becomes your now 6th OD

@WeldWerx Жыл бұрын

You can swap some parts out in the shift housing from a fso6406 to fix your shift pattern

@tb3687 3 жыл бұрын

Drove a wildland engine over the summer. International cab/chassis, Cummins with a manual 6 speed. 1100 gallons of water 4x4. THAT needed the 10 speed! For a Dailey driver and that year where it’s gcvw isn’t more then 18Klbs? I bet the 6 speed is plenty. Good mileage! My woreout 04 duramax only gets 17mpg at best. I’m looking at building my own type 6 wildland engine from a dodge 5500, very tempted to do this swap. Thanks for the video!

@Zewestcoaster 4 жыл бұрын

11:08 "when you hit the clutch, it wants to keep going" Yes, my bone stock (other than exhaust) early '04 305/555 with the stock 6 speed does exactly the same thing. It's worse when your climbing a hill with a load on with your foot in it. You have to let off the fuel before putting in the clutch....

@Blackneck1994 5 жыл бұрын

Good ol 28MT. Threw one in my military 6.2 and I swear it had more torque than the engine itself did.

@averyw.3939 5 жыл бұрын

I'm glad mine came with a 6spd.

@AWSum-uf4ri 4 жыл бұрын

Allisonn trans gave my buddy problems 5 times in a row due to upgraded turbo, now I know what to tell him to do!

@mohamedly5557 5 жыл бұрын

Love your show man! A question if I may Is surface rust beneath the dashboard always means it's a flooded car? I really hope you post a detailed episode about spotting a flood damaged Vehicle especially trucks soon. Kind regards

@Sledgie555 4 жыл бұрын

no.. components inside the cab of just about all vehicles dont get painted because they usually dont get any weather on them and this is how the manufacturers save money. if its rusty is usually atmospheric moisture from wherever the vehicle lived.

@bobbob-fg5wy 4 жыл бұрын

Yep, 10spd overdrive (reversed 4th and 5th) is what needs to go in the Ford behind the cat.

@rodan2852 9 ай бұрын

Honestly i prefer the simplicity of trucks. You can specifically build a truck to suit your lifestyle. Exactly what im doing with a 1966 ford f250 i found hardly a mile from our shop on the way to a job. I hardly ever noticed it where the guy had parked it. He wanted a $4k enclosed trailer for the truck, so i bought him a trailer lol! Keep looking there out there!

@mjmcomputers 5 жыл бұрын

Cool truck! No overdrive needed since 1st is so slow. Just need bigger tires or change the axle ratio.

@mitchellrose7266 5 жыл бұрын

Hey awesome video as always. I bet that old goat has low kms lol.. anyways I got a question, what SAE flywheel housing did you use? I didn't think that the older ISB 24 valve housings would fit the common rail? dodge common rail is quite different than the industrial common rail, (industrial common rail versions have the gears on the back of the eng and not allowing the SAE housing to be installed on a dodge common rail) any help would be greatly appreciated, Hello from Newfoundland. keep the videos coming.

@ryanaxberg9263 4 жыл бұрын

I had my lights flashing like that and changed out the FCM Front Control Module, it is right by the fuse panel under the hood and that fixed it

@joshdobson2737 5 жыл бұрын

Awesome rig! awesome video!

@alexmaccity 3 жыл бұрын

Popped up again. This one I'll watch a second time.

@mr.lowslow7702 4 жыл бұрын

There’s a guy with a a white mega cab 6.7 dually in billings Montana with a 10 speed Eaton in his. Pretty sick tow rig

@namjignerak 5 жыл бұрын

The swap is excellent.

@MW-gh3lt 5 жыл бұрын

The hockey puck body lift 😂😂 so Canadian hahah

@pbfab7764 5 жыл бұрын

What....us 4 wheelers have been doing hockey puck lifts for decades in SoCal. 🤣

@thatgraysuburban 4 жыл бұрын

I run a 05 Dodge Ram 3500 with the NV5600 six speed with a Pac brake exhaust brake in it.

@seanhazelwood3311 4 жыл бұрын

305hp, 555 lb/ft torque. HO for 03 and 04. I have an 04 with nv5600, stock no tuner. I'm debating on G56 or Eaton w/overdrive. The gear spacing in the 5600 always felt strange, so I guess I need to drive the other two (with 24v and 4.10 gear) to see which is best. With Eaton, I would need to source t-case also.

@lowellmiller6663 4 жыл бұрын

Manual transmissions are all right but I'm not a big fan for pickup trucks. I have an FS 5406 behind a 12 valve and it's nice but my 48re built with an override manual lockup is waaay badass in comparison. I tow heavy with both.

@tacticalrepair 5 жыл бұрын

He needs a Fabco transfer case out of an 80s International S1800 4x4.

@kevinhornbuckle 5 жыл бұрын

I have one. I'm going to put it behind a DT 466 and Fuller 5 speed.

@teeg3275 4 жыл бұрын

That's the only problem just not 4 wheel drive

@chrisao1987 4 жыл бұрын

Smart guy. Awesome video 👌

@theeverythingchannelyt548 5 жыл бұрын

Great video BOSS.

@MHFtractor 2 жыл бұрын

Love the video. I could not quite understand what type of pto cable was used for a clutch cable. I am building a Chevy with a Cummins and want to install an Eaton 6 speed and love the idea of the cable. What pto cable was used to make it work?

@redlock4004 5 жыл бұрын

Another fine use for hockey pucks.

@jadams736 5 жыл бұрын

I put a 9 speed in my 96 back in 2000 u can still start out in 7 th gear unless you are tractor pulling 6 spd is good but you can find a 6spd od Eaton but they are hard to find

@dptp9lf 4 жыл бұрын

Awesome! like a semi shift... you have to unload the driveline before the shift:)

@DieselAddict-vs9fc 5 жыл бұрын

The air is very simple on the 10 speed. You could use a train horn sir tank and run one air line to the trans and run the 2 small lines to the splitter. Simple. But agree 10 is a little much.

@RobertKohut 5 жыл бұрын

Nice!! Seems like a great guy!

@catahoulla8488 5 жыл бұрын

That dude just seems super chill lol I

@redneckturtle771 3 жыл бұрын

I know he's probably figured it out by now, but I worked on an International medium duty crane truck that was a 6x6. I don't remember what the trans was other than it was manual, but it had an ISB (it couldn't get out of its own way with the weight of the crane and weights).

@pkuudsk9927 5 жыл бұрын

The good old game the good old game,hockey pucks for the body lift. Are you going to have a meet up this summer ? I couldn't make it last summer.

@ajwilson605 4 жыл бұрын

After putting a tune on my '04 24 valve Cummins, and pulling a heavy equipment trailer with a skid-steer on it, I couldn't keep a clutch in it. Running the NV5600 trans, the stock clutch gave up at 60K miles. Went with an aftermarket clutch that was supposed to solve the problems...... next clutch at 110K miles. Then, after talking to the shop mechanic at the company I drove for, discovered a little company called VALAIR in Mineral Wells,TX. I had them install their ceramic/kevlar single disc clutch. It has a 3400# pressure plate and is rated for 500HP/1000TQ. I've now got 238K on the truck and have had no clutch problems. Valair makes clutches for just about anything. They specialize in big truck clutches and pickups. This guy with the Eaton 6 speed might want to check them out....since his clutch is fading away....