Thanks mate, glad you liked it. Its a bit fiddly to do but once its on its a game-changer! 😎🤙🏻

Yeah brother 100% the lower link is actually just metal without bearings or bushes so the holes for the bolts elongate over time giving some play! Thanks for watching 👍🏻👍🏻

Thanks bro appreciate it! Glad you found it useful! More videos to come 🤙🏻🤙🏻🤙🏻

Thanks bro! Appreciate it👍🏻

Thanks man! More to come stay tuned! 🤙🏻🤙🏻🤙🏻

Glad to help Johnny! Hopefully see you out on your Talaria on your channel soon! 👍🏻

Thanks man! And You don’t have to remove the sprocket, you just stretch the oring over the top as they are rubber then it push it behind the the clip if its a bit baggy, friction holds it in! If you contact me on instagram i can send you a short video explaining it!

Thanks for watching! Appreciate the support🎥

You are very welcome! Thanks for watching man! 💪🏼🔥

any video for the oring install ? I'm trying to do it by just using snap ring pliers in between the mainframe and sprocket and having a tough time. Also, where do you get 2.4mm orings ?I got 0.10" inch ones which are very slightly too big and they honestly don't fit behind the c-clip. Is it possible to just push the sprocket back and wedge the oring in behind the c clip? or do you have to remove the clip ? because it almost looks like I can create enough space to wedge the oring in...

Thank you for heads up, i have no warp 9 on my bike personally not a fan but doesn’t mean its not good just personal preference. I prefer evolve uk. My new linkages are from here www.e-volveuk.com/talaria-parts/p/f9faa8837gc6r5kt7vwhrhuriy53nw 👍🏻👍🏻👍🏻

@@stingyrogerr Thanks for the info, buddy appreciate it.🤙

Fast ace rear shock is actually a good shock. If you want to spend a bit of money the ext arma MX is the best shock! Here’s my old review of the EXT ARMA MX shock : kzfaq.info/get/bejne/Zs6ahtyktquWpWw.html But the fast ace rear shock is real good! I even briefly discuss the fast ace shock absorber at the end here! kzfaq.info/get/bejne/kJd1erqDyZa8m5s.html

Thanks for watching! Glad you found it useful! I have a few more hacks up my sleeve for a future video so stay tuned! 🤙🏻🎥

​@@stingyrogerrhave you done the seat riser mod? I haven't yet but wondered if it makes any difference

@worthyo no brother! Im only short so the bike is the perfect size for me! However, I since this video I also replaced my triangle with a CNC one from e-volve Uk and it made the bike a fair bit quieter again as it fits nicer with better tolerances removed a small clicky / clunk from the suspension which had been bugging me! I do occasionally feel a slight clunk and weird sound when landing on jumps coming from underneath my seat though so I will have to investigate this!

@@stingyrogerr cheers brother! Happy riding!

I hear ya! Will try get those out! 👍🏻👍🏻👍🏻

Would be mega please mate

Dont have a Instagram do you mate?

Yes brother its @stingyrogerr Its also inthe descriptions of my videos with a link!

I need this too!! Is there already a video about this?

Thank you! Im glad you enjoy them! I have a 100/90-19 rear on my stock rear rim! You have to shave the knobblies down on the chain side a little bit but hardly anything. My tyre is Kenda Trakmaster K760. 😎

Hey thanks for watching! They are from stag motorcycles stagmotorcycles.co.uk/products/stag-carbon-fibre-frame-guard-for-talaria-sting

Those are from stag motorcycles. In my original build video I linked them in the description if you need a link! 👍🏻

Hey man! Thanks for watching, it could be a number of things. When I had that noise it was a combination of a chain which was overly loose and the sprocket wobbling on the spline. If not then it could be that you need some more gearbox oil! Thanks for watching. If you need further help feel free to send me a video on instagram DM @stingyrogerr 🤙🏻🤙🏻

Possibly! Give it a go man!

Thanks for watching! You are welcome! I have no clue what it could be but the noises are damn annoying. With a gas bike the engine masks all the rattles! 😎

Does ur noise happen when ur dereving?

@@johncrew-nj3yo Mostly, yes. But it's not the chain.

If it’s an mx4 their motor differs from the mx3 and recently after riding a few can confirm they have noisier rattly motors from factory!

@@BarcombeBoy same mate does it come from the left on side can’t seem to figure it out

Hi Tom! So you can get a pack of various orings on amazon! I got my 18mm oring in one of those! Its cheap and comes with hundreds which come in handy when you need to shim or fix anything else. KATUR Universal O-Ring Assortment, 279Pcs Metric Set, 18 Sizes 3-18mm Internal Diameter, Black Rubber O-Rings for Plumbing, Automotive, General Repair amzn.eu/d/8fO0keA For the headset thats a very long explaination to type but this video should help! kzfaq.info/get/bejne/fZpzoJB5ntCUpX0.html Once all tight install a head lock and it shouldnt move again! Hope this helps 🤞🏼🤙🏻

Nice one mate thanks 👍 what about for back suspension linkage ? Cherrs mate

You’re welcome - Thats listed in the description!

The first sound is your front sprocket having slack which is sorted by the oring I mention in the video. It stops the front sprocket having any wiggle room 👍🏻

Between one of the clips and the sprocket - so the front side facing the bike frame would be easiest but if you have the motor out for any reason you could also put it behind the sprocket :)

Its silicone you stick the back with silicone to the frame then ziptie on while it sets

If on stock suspension its time to upgrade or rebuild. Usually the sounds/clunks come from failed dampers or broken components 👍🏻

Hey man! Thats the internal diameter & the size you order online! Its cheaper to order a pack of 10! Then you have some spare…. 🤙🏻

@@stingyrogerrthanks so much! By far best video to date that solve this unbelievably annoying frustration. THANKS!!!!

Thank you, that means a lot! Im glad you found it helpful, plenty more tips and hacks to come! 😎

They have some of the same problems such as headsets coming loose but then they have their own problems like a squeaky belt or belt snapping and flexxy swingarm!

Hey bud, as i said. Place it between the sirclip and the sprocket. If you dont know what I mean by siclip its the c shaped clip holding the sprocket onto the spline. If you pause the video on the part where I show little box with the sprocket rattling you will see what I mean. Stretch the oring over the sirclip and itll sit between them like a rubber buffer as there’s too much gap 👍🏻

Thanks man, Keep making those talaria content. You’ll be a hit soon. Keep it up

Hey bro, you can actually just stretch the O-Ring over the sirclip and push it down between that sirclip and the sprocket. I didn’t have to remove anything at all! Also, If you have sirclip pliers ( can get on amazon for a few £/$) then you can use that to stretch the oring over too but if not then a small flathead screw driver works nicely. Thanks for watching! Hope this helps! 💪🏼😎

@@stingyrogerr Oh cool. I have the pliers but if it is still too tight then a screwdriver it is. Thanks so much.

Anytime! Plenty more hacks and tips to come. Appreciate you watchin!

@@stingyrogerr so the O ring just sits on the outside of the sprocket,so I don't even need to take the chain off, for a second there I thought it went on the inside I didn't think it would stay on if placed on the outside but I think I can just about see yours when I paused the video. I got a pre production test talaria about a month before they went on sale last year and it's still going strong with the crazy low end torque have the talaria R coming next week, im on the fence on whether to sell the MX3 as it's just so much fun to mess about on, just found your vids randomly on here and you deserve a sub mate.

Hey! Thank you for watching! I really appreciate the kind words! You’re right, you don’t have to remove the chain you just stretch the o-ring over the sirclip using some sirclip pliers or a flat head screwdriver! Once you get your o-ring on, if its not fully seated give it a prod with a flat head and it will sink down into the gap between the sprocket and sirclip! Mine has been in for around 600 miles! Plenty more content to come every week!💪🏼

Hey man thanks for watching! It was just 18mm x 2.4. I got mine from this kit! Super inexpensive and comes with plenty of sizes to shim other things in future. www.amazon.co.uk/200PCS-Gasket-Assortment-Electrical-Plumbing/dp/B07ZRC4FXJ/ref=asc_df_B07ZRC4FXJ/?tag=googshopuk-21&linkCode=df0&hvadid=399557848743&hvpos=&hvnetw=g&hvrand=9962780841454842343&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9044923&hvtargid=pla-844215247384&psc=1&tag=&ref=&adgrpid=85427416219&hvpone=&hvptwo=&hvadid=399557848743&hvpos=&hvnetw=g&hvrand=9962780841454842343&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9044923&hvtargid=pla-844215247384

@@stingyrogerr thank you so much my man !

Hi mate, its a 100/90-19 Kenda K760 Trakmaster. Thanks for watching 💪🏼

My swing arm atm is silent, sometimes your suspension triangle under the linkage has some slack if you still run the stock cast triangle, if you take a look at my most recent bike mods update video from a couple weeks ago - I replaced mine with a cnc one after some knocking was coming from the swing arm area and now the noise is all gone!

@@stingyrogerr Yh I just put on the full e charged rear shock linkage but still makes sound from swing arm☹️

@harveystimpson2891 oh damn bro no idea, how many miles has your bike done could your rear wheel bearings be shot?

I’ve only done 500 miles but I’ve already checked rear wheel bearings there sweet and the bikes made the noise since I brought it

Theres 50 videos on my channel and lots are riding videos if you want to hear the sound of my bike :)

Hi there, thanks for watching! I don’t understand your comment! What nose? If you mean noise then I think I explained in the video that when the headset works its way loose it begins clicking and making noise. the head lock as explained clamps everything together and doesn’t let the headset come loose again after you install it - in return the headset never makes that noise again as it never comes loose again. Hope this helps! 😎😎😎

Haha!! Thanks for commenting You cant ride a crosser half the places you can take these ebikes though! Ive got a KTM and Honda as well as surron, turbo levo and other two wheeled crap in the shed as well - im a bike addict! 🤙🏻🤣 theyre next up against the talaria in the series! Got lots of toys to text it against in the near future just getting round to filming it all! Thanks for watching mate!!

@@stingyrogerr our one lucky guy then 👊

I agree 100% I am very fortunate. I really appreciate you taking the time to watch though and your comment did make me laugh!! 🙌🏻😂

I could but I would have to take my bike apart again! 🤣 thanks for watching though ! I didn’t have any tutorials to watch when I did these hacks they’re fairly easy to work out bro! Give it a try ❤️🤙🏻

Thanks bro I bought a talaria X3 and my suspension under the seat keeps squeeking do you know how to fix that?

@renagadegamer1384 no bro! Sorry man, unfortunately not many people in the UK have the x3 as its £3,500 here and a brand new surron or mx3 can be had for £3,800 so it may be a while until I can get my hands on one!

Excuse me, I don’t understand?…

Mx3 - mx4 has same issues but chain noise cant be fixed