You are kick ass man. Not many explain things so easily and concisely as you. I learn tons from your channel

Something worth noting after initial setup. In my experiences, setting the EPA to 50% before plugging in servos can save the servos, especially the little Chineasium mini's IF they decide to go full send in either direction. Great vijaeo👍👍

Thanks for the tips. I have a few of these radios, 1 I use, and 2 others I got on sale, as spares. I like them. And you can't beat the price of the receivers, especially compared to other manufacturers. Also, having 6 channels is nice if you want to control things like lights on or off etc. etc.

Great short but sweet video..thank you

I took out a buggy that I just finished building, I noticed I needed to adjust the steering end points because it was flexing the servo in it's mount at a full turn. Could not remember how to do that on my RC6GS, but I remembered this video and you covered it! thanks!

Another Great Instruction Video Brother Very useful information on the Radiolink RC6GS 😎👍👍

Ur a life saver I was going bonkers trying to reverse my throttle lol

such a straight forward video and really helpful with menu settings. Thanks so much bud got my rc4gs all dialed in

Just purchase this radio for my limitless. Nice explanation on the features. Thank you!

Man this really helped me out in my new nitro engine. She is throttle sensitive and I needed it to slow it down.

Great video, man. Very much appreciated.

Nice review sir thank you.. Always support your channel 😆😆👍👍

Thanks for your upload mate 👍

thank you for the tips sir! it will help alot with my fast tamiya tt02, ill be able to trim sensivity and trims easly! ! thank yooouuuu

Thank you so much. Super helpful video 👍

Thanx this video helped fix my steering and throttle

Just got my first transmitter. This answered a lot of questions about the setup even though I have a Radiolink AT9S a lot of the concepts seem to be the same across most models. Great video. I'm trying to setup a tank crawler and having a really hard time with the configuration. I think it's because my stick mode is different than how I want to use the sticks. :/ Next youtube search is for stick modes.

Even though I only got 4 channel version I was stuck on steering trim thanks for help

Thank you! You are my savior

Really helpful vid, thanks!

Awesome info & very straight forward!! Just the info I was looking for. I have been using this controller for ~2yrs & wasn't sure about the steering & throttle exp settings. I do speedruns & I needed my speed sensitivity for the steering really low. I have been using endpoint settings to reduce the travel & speed of the servo. But it's a pain cuz it's hard to turn the car around at the starting & ending points of the run. I would have to increase the steering travel endpoints to turn the car around & decrease it for the run. Because at 120+mph, you do NOT want to pull that steering hard & too far in either direction lol..... Bad things happen 😄 For the throttle, I had been using the punch control on the Castle ESCs. I will have to see how it works out for speedrun setups, cuz these cars will literally spinout out of control when taking off at just a hair tap of the throttle. Thanks again for sharing 😎 👍

So with the throttle expo setting for example, I could adjust the settings if the truck is lifting the front end too much on take off, correct? Currently my son just grabs full trigger since he hasn't mastered modulating the throttle yet. I love the jackstands you have your trucks sitting on in the background! Very cool!

The reverse 🔄 PART HELPED FOR RADIOLINK 7…MSG HOBBIES & high quality gaming!!

Thank you

I use many of those settings on the eight vehicles I have bound to my Radiolink RC6GS V2. I find steering expo to be the most useful, especially on vehicles I use primarily for straight line runs. With expo set at around -30, it's easier to keep the vehicles straight and not have the vehicle veer quickly at high speed. I find setting servo endpoints is easier with this radio than on other radios I own or have owned.

Thank you so much for all that great information I just received my radio link for channel receiver controller. It’s gonna take a little time but I’ll get used to it it already performs a whole lot better than the Spektrum STX2. 😆

Nice video man

Some might understand what Expo means easier if they knew what it stood for; the mathematical function Exponential.

Good vedio so helping me tq so much sir 😁😁😁❤️❤️❤️

Aye guys God bless love what your doing I just bought it and I wanna is there a chance it gives u temp

Good video thanks

Thanks for the tips, helped me out alot. One quick question, the voltage displayed on the screen, is it for the transmitter or vehicle voltage?

I planning buy one these. Question. This radio has countdown timer? I will use on buggy race and need this timer to alert when I need goto pit.

Thank you Joe for this video it helped me alot. Can you tell me how to adjust the braking?

Any idea on how to add/remove brake strength on this radio? What menu? Thanks!

Is there a way to control steering dual rate with one of the switches?

How do you slow down reverse to make it less jumpy and smoother? Cheers.

I know you can ch mix for 4w steering, but is there away of of mixing a toggle switch in so you can turn it off , crab steer and normal 4w steer , Like you can with other tx,s

Life saver

I need info on how to set ABS. Right now with ABS off, car stops on a dime without lockup. It seems I don’t need ABS.

Is it possible to assign speed change to VR dial? Also, is there a way to make the lights that I installed to turn in and off?

thanks for this 317 RC put me onto this video as I needed the Steering EXPO help big time! Watch out for me putting your tips into action on the 8s Traxxas Rally this weekend!

CAN I USE THİS ON DRİFT CAR? this remote control can controlled ?

If i get a second reciever box for a different vehicle will it unbind the first reciever?

I'm an issue. Why does the acceleration lag by about 3 seconds after going in reverse?

How do I get the reverse and forward correct it I. Reverse only this minute

Does anyone know how and if it is possible to set EXPO on off on a switch

Can the VR knob be setup to change the throttle rate? By that I mean I can change the max speed with this knob?

Have you looked at ID seed function with new firmware upgrade,

my question is what are you all doing with the second antenna on the reviever?

It has the dual-rate option, but there's no button, and you can't assign any button to control it.

Hi, I would like to ask for your help if it is possible: I have this radio model but (I don't know how) the "beep" of when the radio is turned on and the "beep" of the keys is gone Can you tell me how to restore the sound ?? P. S. I also tried to reset the radio and remove the batteries, without getting anything. Thanks a lot if you can help me !!

You run a lipo in your RC6GS ? What ist your longest runtime with the Radio?

CAN YOU HELP ME OUT?… RG6&xlx2 my Kraton wants to act like it’s in rock crawl mode or something. Motor wants to copy throttle so tightly that it will not coast down hill if there’s ANY throttle input at all, it won’t want to roll faster than what the throttle input allows. It rolls perfectly free in neutral yes it does but, if I’m doing 10-20-30-40 mph, I have to let off the throttle iMMEDIATELY if I want the truck to coast freely and not “jerk” and stumble because it wants to copy the throttle command even if it’s returning back to neutral. No aux wire, no modes assigned to it neither. It’s got to be something with the transmitter.🤷‍♂️ help plz thanks.

It give you everything else

I’m using this radio and receiver on my limitless, which I use for drag racing, I’m having a hard time to get the steering straight! Can you please help me

How do I activate the RadioLink RC6GS v3 failsafe because when I turn off the radio the cart accelerates by itself?

How do i setup failsafe

My Sumter ring is stuck in reverse