5" Turbo Back Exhaust Kit For Your RAM 2500/3500 Cummins Sounds Amazing!

Рет қаралды 75,253

2 жыл бұрын

In this video we replace my stock 4" exhaust with the new yikatoo 5" turbo back exhaust kit on my deleted ram 2500 cummins 6.7 and it sounds sick! the video shows great before and after sound comparison. link to product yikatoo.com/products/yikatoo%...
STAINLESS STEEL 5" TUBRO BACK EXHAUST PIPE FOR 2013-2018 DODGE RAM 2500 3500
Feature
Condition: 100% Brand New
Material: 409 stainless steel with magnetic
Surface Finish: Anti-rust oil
Color: Silvery
Note:Our items are replacement parts for existing auto parts and cannot be used to change or control the original exhaust system
Fits
2013-2018 Dodge Ram 2500/3500 6.7L
for cool tee shirts and merch check out the store
teespring.com/stores/frostbit...
also follow on
instagram@frostbite_ram
facebook@frostbite ram
frostbiteram.com/
for the best mopar transmissions and parts
www.coperacingtrans.com/
/ coperacingtrans
for quality superchargers www.torqstorm.com/
Tuner and camshaft I use
frptuning.com/
For the best exhaust
www.karnageperformanceexhaust...
troysmuffler.com/
nitrous kit I use
www.nitrousexpress.com/hemi-p...
www.spelabautoparts.com/ for great exhaust cutouts and more
superclean.com/ for great degreasers and cleaners
camera I use
Canon EOS M50 with RODE mic
S22 Ultra phone
gopro hero 5 session
runcam 2

Пікірлер: 110

@averyjohnson2321 2 жыл бұрын

Beautiful Truck!!! Looks BRAND SPANKING NEW!!! Great video!!!

@FrostbiteRam 2 жыл бұрын

Thanks man its not new but pretty clean for a previous work truck lol

@mackharris6536 11 ай бұрын

I love that sound on the cummins ❤❤❤❤❤❤❤❤❤

@FrostbiteRam 11 ай бұрын

Definitely

@freerepublicusa2064 8 ай бұрын

Beautiful color and love the long bed. Nice rig

@FrostbiteRam 8 ай бұрын

Thanks

@kblack356 2 жыл бұрын

Does make for a nice sounding ride 4 sure.

@onefastlife5017 2 жыл бұрын

Hell yea ! Sounds bad ass

@FrostbiteRam 2 жыл бұрын

Thanks

@emmaseidel1287 Жыл бұрын

I'm getting ready to put this on my truck. I can't wait for the 5' sound.

@FrostbiteRam Жыл бұрын

Right on!

@anthonykontos7931 11 ай бұрын

@@FrostbiteRam can this same sound be done with out deleting?

@zanepayne705 9 ай бұрын

@@anthonykontos7931 no

@Bigdaddyy69 8 ай бұрын

no@@anthonykontos7931

@TroyGrimes 5 ай бұрын

@@anthonykontos7931you can remove the muffler but it still wont sound the same as a fully deleted truck.

@vee5222 10 ай бұрын

FloPro exhaust is amazing... the hardware is so much better and more HD I find.

@FrostbiteRam 2 жыл бұрын

Thanks for the support mopar fam the 5"pipes sound sick💪🔧👍🍻 yikatoo.com/products/yikatoo%C2%AE-stainless-steel-5-tubro-back-exhaust-pipe-for-2013-2018-dodge-ram-2500-3500?_pos=4&_psq=ram%202500%205%22&_ss=e&_v=1.0

@alittlebitofeverything5090 Жыл бұрын

I didn't believe it until I bought a larger tip how much of a sound difference it makes.

@FrostbiteRam Жыл бұрын

For sure

@davidrieur6025 Жыл бұрын

I bought a 5” back for a 2012 Cummins the turbo flare was to small I had to bend it back with a hammer to flare it more and mine did not come with that nice dual hanger bracket

@RoadhouseTexas4288 Жыл бұрын

Sounds amazing

@FrostbiteRam Жыл бұрын

Thanks I love it

@anthonykontos7931 Ай бұрын

@@FrostbiteRamreally want to get this done any place that is awesome

@shaynekirby9117 11 ай бұрын

I'm curious what made you guys use that brand vs a more popular brand, such as the Flopro

@boostf-1509 2 жыл бұрын

To bad they don’t have it for the third gens I was excited for a minute

@FrostbiteRam 2 жыл бұрын

Pretty sure I seen some on the page

@user-cg1tg8xk2f Жыл бұрын

could you fit this kit into a 2011 2500 6.7L laramie mega cab?

@lacygilmore3112 2 жыл бұрын

Sweet, time for road pulls

@FrostbiteRam 2 жыл бұрын

Oh yeah

@TattooedNSnappedBack 9 ай бұрын

I cut mine and did an axle dump with it got tired of soot on my back corner of my bumper

@mariovera4434 Жыл бұрын

I have 2014 ram 3500 cab chasis. fit same exhaust pipe …

@davenbennallie8593 Жыл бұрын

I want to hear that tail pipe installation

@JVSwanson_Boy Жыл бұрын

Are the little tubes going into the exhaust required to be capped? Or do you need to tune them out?

@FrostbiteRam Жыл бұрын

If you have a non deleted truck you will probably need a tune. Mine was already deleted but still had the factory 4" pipe.

@codykosmos2530 Жыл бұрын

product seems to no be available anymore

@maxhammontree3169 Жыл бұрын

I like the rusty, rattle can chrome paint job with rust coming out. Is it really stainless???

@jeepwk6.5L Жыл бұрын

Probably low grade stainless also anytime you contaminate stainless with carbon it can rust. Who knows they could store this stuff on a carbon rack, or use a carbon wire brush or something.

@tallr264 Жыл бұрын

Bad boy! I have a 2008 dodge ram 2500… I wish I can install the 5 inch pipe on my truck butt I live in California 😔 Anyway I think I cam it

@FrostbiteRam Жыл бұрын

Thanks💪

@tallr264 Жыл бұрын

@@FrostbiteRam no problem

@stiffmeister0hYeah Жыл бұрын

I'm late to the party. Flying from Cabo San Lucas back to the US to purchase a 2014 or 15 2500 6.7L. Since I now live in Mexico and could care less about emissions, is this full delete the way to go? I've read the DEF is a good thing for fuel mileage. This truck is going to be used for towing long distances. I assume I can find a section and install a 5" muffler. I know EPA has been cracking down on everyone....wish I wasn't late.

@SleepyJoeisSlow Жыл бұрын

Do you get a drone sound? Was told to put a resonator on with a muffler so just wondering. Btw fantastic vid!

@alittlebitofeverything5090 Жыл бұрын

All the exhausts have a drone sound because the pressure echoes inside the pipe. I bought the twister muffler that has a corkscrew inside of it and it completely eliminated the drone. I installed it before it goes over the rear axle. It's about 18" long can't remember the brand. The exhaust won't be as loud on the outside but it's still pretty loud.

@SleepyJoeisSlow Жыл бұрын

@@alittlebitofeverything5090 Great! A little loud is ok. Hearing me two blocks away isnt lol

@FrostbiteRam Жыл бұрын

Thanks and no drone with the new karnage performance diesel muffler its awesome

@SleepyJoeisSlow Жыл бұрын

@@FrostbiteRam oh, I bought the twister resonator. Guess a muffler might be in the future too. Thanks for the reply!

@markm0000 2 жыл бұрын

EPA can kick rocks. They’re no longer allowed over what is allowed by goobement. A moment of silence for those fined into oblivion.

@FrostbiteRam 2 жыл бұрын

Right🤣

@marcellopasini Жыл бұрын

Nasty

@karlomarkovic3278 Жыл бұрын

What’s difference on exhaust from 13-18 compared to 09-12

@malibudude1978 Жыл бұрын

DPF filter vs DEF system

@verifytorch157 Жыл бұрын

whats the sheet say for the cut length on a crew cab short bed?

@FrostbiteRam Жыл бұрын

I dont have the sheet anymore lol

@verifytorch157 Жыл бұрын

@@FrostbiteRam all good, i paused the video at a good spot and could read it

@MrThedonkey02 6 ай бұрын

Will a None deleted truck will sound like this one just with 5" stra8 pipe??

@FrostbiteRam 6 ай бұрын

Probably not honestly

@isaacelias7020 Жыл бұрын

No one ever shows how they got the vband on. It has turned my quick job into 3 days now.

@alittlebitofeverything5090 Жыл бұрын

Yup I put mine on about 7 years ago and omg what a pain that v band is. It's like it takes longer to do than the entire ehaust!

@SleepyJoeisSlow Жыл бұрын

Please share any helpful info please!!!!

@alittlebitofeverything5090 Жыл бұрын

@@SleepyJoeisSlow What helps is taking the passenger's side wheel well plastic completely out. Make sure the flare is correct on the exhaust if you are not doing a complete turbo back. If you are doing just from the downpipe back, get someone to help you line it up and do that pipe first, but leave the band loose until you are done.

@SleepyJoeisSlow Жыл бұрын

@@alittlebitofeverything5090 Hey I really appreciate that info! May your favorite team win this year🌝

@alittlebitofeverything5090 Жыл бұрын

@@SleepyJoeisSlow No problem at all. If you were close to Massachusetts I would help you do the install! Definitely easier with 2 people. If you do it by yourself grab a case of beer lol

@charlesdarwin2994 Жыл бұрын

Could I install this and add a silencer to balance the sound?

@FrostbiteRam Жыл бұрын

Sure

@thomaslittle9535 Жыл бұрын

how do you get it in without dropping the crossmember

@FrostbiteRam Жыл бұрын

Mine was simple

@joeg8236 Жыл бұрын

Did you have to cut or bend any hangers?

@FrostbiteRam Жыл бұрын

I believe so

@jonathanwharton5837 10 ай бұрын

Has the vband issue been fixed and does it actually seal properly?

@FrostbiteRam 10 ай бұрын

Not sure but mine works great

@jonathanwharton5837 10 ай бұрын

@@FrostbiteRam did you have to bend it

@Waterstsanjo 11 ай бұрын

Do you have to delete in order to put on a straight pipe?

@davidreed7411 9 ай бұрын

Yes

@jesshays9688 Ай бұрын

Does it need tuned after install?

@FrostbiteRam Ай бұрын

@adamczajka8520 Жыл бұрын

Did you need to drop the trans support in order to get the down pipe on?

@FrostbiteRam Жыл бұрын

@markj8441 Жыл бұрын

video is awesome but I'll steer clear of the company that makes that exhaust after seeing those dogshit welds

@danreardon505 Жыл бұрын

You guys do the delete kit? Or know someone that can do it, and knows what the hell their doing? Appreciate any info

@FrostbiteRam Жыл бұрын

Mine was already deleted just upgraded the stock pipes

@DriftingLifeSideways Жыл бұрын

Dont like how far back the exhaust exits

@Pickleram 2 жыл бұрын

Long beds forever

@Bigdaddyy69 8 ай бұрын

what size tires on that bad boy

@FrostbiteRam 8 ай бұрын

35"

@genesamuels9980 Жыл бұрын

Does this fit the 5th gens

@raymencaldwell3854 Жыл бұрын

I bought a 5 inch kit 5th gen, they have them my mpg went up a hood 7 after deleting

@leomarguzman8996 Жыл бұрын

Where you guys located?, I have a 2016 and I want to delete it

@FrostbiteRam Жыл бұрын

I just did it myself not a shop

@leomarguzman8996 Жыл бұрын

@@FrostbiteRam ohh ok. Are you interested to do another one?🤣🤣

@coltonchristman2070 Жыл бұрын

So basically the instructions they include you don’t need. Seems like it needs to be downpipe, long section, short section, medium section, over axle. And no where does it mention cutting for a crew cab king bed but if he cut 5 inches then I guess I am too