5000 Subscribers! Answering your frequently-asked questions!

No video

5000 Subscribers! Answering your frequently-asked questions!

Рет қаралды 1,934

FPGAs for Beginners

Күн бұрын

Пікірлер: 34

@yogeshrm311 10 ай бұрын

Congratulations for 5K ... Wish you to reach 100K soon..!!! 💐💐💐

@FPGAsforBeginners 10 ай бұрын

Thank you so much 😀

@arturoliveira6514 Ай бұрын

don't stop posting!!!

@Mauro-ds6uo 10 ай бұрын

Hi stacey, congratulations for this goal, I wish you the best! It would be very interesting to delve deeper into the FPGA engineering career side

@FPGAsforBeginners 10 ай бұрын

Great suggestion!

@ElectroWolf_Arts 3 ай бұрын

Hi, i've been using the GOWIN TangNano 1k, a very basic and simple FPGA board, i managed to create some projects using Schematic Entry which is one of the 3 Methods to program an FPGA [HDL(verilog, VHDL) , HLS (C++), Schematic Entry). the Schematic entry is just build logic gates circuits to mimic a code and do the same job. unfortunaly there is so Analogue support so no audio control or analog sensors for automation. but i m devloping digital logic circuit library to support I2C, SPI and UART to use them when ever i need them. good luck for everyone and good luck for you Stacey...... i hope this content get its popularity.

@AggressiveMenace 10 ай бұрын

I have no idea about your current occupation but I suggest you trying to do some MOOCs about FPGAs, embedded systems, programming, and your general skills. You teach very well and it's an excellent path for extra incoming.

@FPGAsforBeginners 10 ай бұрын

Thanks for the suggestion. I've looked into this and found that a lot of the platforms take a really large cut and their terms are quite unfavourable to the creator. I am looking for a MOOC platform that would be better. I also need to decide how much I'd charge (if anything) for what service. My entire goal is to make learning about FPGAs as free/cheap as possible, and charging seems counter to that. So having the videos up on youtube, while not very lucrative, is more aligned with my goals for this channel. Naturally I do want to make some money, but I do have a day job working with FPGAs, and that is covering all the youtube costs for now. (also, I have been surprised at how generous some people have been with the buy me a coffee donations). I may end up doing mentoring/group sessions that are paid in the future as well. But the goal is to keep the videos free.

@CodeJeffo 4 ай бұрын

Your content and insight are unbelievably valuable, keep it up! See you soon 15K ✌

@FPGAsandbasicElectronics 4 ай бұрын

7.22K, waiting for new content, such a good channel👋

@thomasparker4109 3 ай бұрын

where a u? Is it everything alright ? We a miss to u!

@_oig 10 ай бұрын

Random comment but I actually took a class with the professor who made the free textbook that you recommended for VHDL. I will say that James Mealy is truly one amazing professor at Cal Poly San Luis Obispo. I have so much respect for him and learned so much from him.

@asm2750 10 ай бұрын

Congrats on 5k!

@thomasparker4109 10 ай бұрын

Amazing!

@cccmmm1234 10 ай бұрын

Verilator is also a great no board option. This compiles Verilog to C++ then allows you to do C++. Test benches. The EDX RISC V coarse is prettv good IMHO.

@FPGAsforBeginners 10 ай бұрын

Verilator is such a great tool! I'd love to get more experience with it.

@mrshodz 8 ай бұрын

Great news.

@cccmmm1234 27 күн бұрын

Hi, I hope you're doing OK. Just watched your ethernet video for some inspiration.

@GinoPissoi 8 ай бұрын

Good tutorials. Stacey, Have you ever worked with the Zynq global timer? Is it possible to use it as a regular interrupt source?

@christakacs7488 6 ай бұрын

Hii, can you make a video about EMMC and how to set it up please? :)

@user-ti1tq1rz4k 10 ай бұрын

Your videos helped me to pass my first assignment at the university, while I thought I am too stupid to understand Vivado and FPGA

@digitalguy7859 9 ай бұрын

Any recommendations on how to properly write SDC timing constraints? I did what I think is correct but have sooooo many failed timing paths. 😢

@Consul99 10 ай бұрын

Did you go straight from uni into FPGA industry? I've been interested in FPGAs but found it hard to find a job due to how niche it is, especially in Australia and the fact that we only had 1 subject that briefly touched on FPGAs.

@FPGAsforBeginners 10 ай бұрын

I did go straight to industry from uni. I also only touched on FPGAs briefly during my course, but did some internships during my last year that familiarised me with FPGAs and it was during those that I decided I wanted to make FPGAs a career. The company that hired me also trained me in FPGA design.

@Leethal60 10 ай бұрын

I have an issue with some adc/spi verilog design which fails to meet timing. Any idea how I might proceed. I probably need someone to look at the design but I'm not sure where to find someone. Any suggestions anyone?

@FPGAsforBeginners 10 ай бұрын

You're welcome to mention it on the discord if you have a specific question. I also have a video demonstrating how to fix failing timing: kzfaq.info/get/bejne/hsqmoZeo2r-mn58.html

@shebo96 10 ай бұрын

hello there stacy i hope you read my comment i bought machXO3 lcmxo3l do you think it's a good starter FPGA

@FPGAsforBeginners 10 ай бұрын

If you have the resources to help you learn about it then you should be OK.

@shebo96 10 ай бұрын

@@FPGAsforBeginners actually no, it was the cheapest entry level fpga i could get my hands on. there is no you tube tutorials or even reviews about this board

@shebo96 10 ай бұрын

@@FPGAsforBeginners however, it is from lattice which is a respected brand i think ??

@CallistoPili 6 ай бұрын

@@shebo96 what matters inintially is the pinout and the Tool to prepare the projects(Vivado, Quartus, Lattice, Libero), then the logic inside the FPGA or CPLD to understand what can you do with it. You need to start with a very basic simple stuff first.