5Hz NEO-6M Speedometer with Arduino
Рет қаралды 4,749
Жыл бұрын5Hz GPS Speedometer with Arduino and NEO-6M
Most Cars' Speedometers are inaccurate, and having a GPS Speedometer is one solution to this problem.
I was inspired by iforce2d videos and the amount of information he provided about U-blox GPS, so I decided to create this video to show how to make a similar GPS Speedometer using the famous U-blox NEO-6M with 5Hz update rate.
Note: The maximum refresh update for NEO-6M is 5Hz.
Arduino code (UBX_1MSG)
drive.google.com/file/d/1NALf...
Wiring Diagram 01: USB to TTL converter using Arduino:
drive.google.com/file/d/1yvWL...
Wiring Diagram 02: Arduino Speedometer
drive.google.com/file/d/1fob4...
iforce2d GPS video
• UBX binary protocol, e...
U-Blox U-Center application:
www.u-blox.com/en/product/u-c...
Thanks for watching
@johnferguson1114 4 ай бұрын
Thanks for this. First Arduino project I've done and it works perfectly. Now I guess I'll have to start learning some code... ;-)
@3DElectroTech 4 ай бұрын
Glad to hear that :D
@Kpop_princess1 Жыл бұрын
Nice❤
@toka031 7 ай бұрын
Hello, i am using your gps-speedometer code and its working perfectly. But when i add temperature sensor to pin4 its stop working, it starts refreshing speed every 6 to 10 sec. Can you help me? Thanks!
@3DElectroTech 7 ай бұрын
If there is a way, you can share more details like pictures and diagram. We will try to find a solution.
@75Seinfeld Жыл бұрын
THX for this. But I'm not able to reconfigure the NEO-6M module using U-Center (Arduino Nano clone)?!? It won't let me disable the NMEA messages ....
@3DElectroTech 11 ай бұрын
This video shows how to configure NEO-6M using Arduino UNO kzfaq.info/get/bejne/d9Vli7WlyZO2cXU.html If that doesn't work, try using USB to TTL converter www.amazon.com/s?k=usb+to+ttl&crid=31YN9R1KHBVO&sprefix=usb+to+ttl%2Caps%2C352&ref=nb_sb_noss_1 If that also doesn't work, you probably have a NEO-6M with no re-flashing capability. I have a NEO-M8M that I couldn't configure because of that reason :( I hope that helps.
@sanjuk2325 10 ай бұрын
Yep bro I too cannot reconfigure, any solution?
@3DElectroTech 10 ай бұрын
@@sanjuk2325 There is a way to send the configuration whenever the device restarts. I probably have to make another video for that update
@sanjuk2325 9 ай бұрын
Bro do a video on it as you said 🥰
@3DElectroTech 9 ай бұрын
@@sanjuk2325 I will try my best 🙂
@diniduekanayaka6206 2 ай бұрын
Is it ok to give 5V to module?
@3DElectroTech 2 ай бұрын
Yes, as every USB supports 5 Volts
@sanjuk2325 10 ай бұрын
What does those lines on corner describe ??
@3DElectroTech 10 ай бұрын
Which corner exactly?
@sanjuk2325 10 ай бұрын
Left top those 2 lines which are rotating...
@3DElectroTech 10 ай бұрын
@@sanjuk2325 The left one shows that the screen is working and the right one rotates when you are receiving updates from NEO-6M
Kirill Multitool
Рет қаралды 62 МЛН
TechaDon Master
Рет қаралды 321
Robert's Smorgasbord
Рет қаралды 10 М.
Mostakim 1.0
Рет қаралды 8 МЛН
Hana Shorts
Рет қаралды 7 МЛН
BYB Academy
Рет қаралды 62 МЛН