If you liked this tutorial, please consider making a small donation, it will help us! 𝐘𝐨𝐮 𝐜𝐚𝐧 𝐬𝐞𝐧𝐝 𝐲𝐨𝐮𝐫 𝐝𝐨𝐧𝐚𝐭𝐢𝐨𝐧 𝐡𝐞𝐫𝐞 👉 donorbox.org/5-minutes-blender
@Braveclean9 ай бұрын
After being frustrated for hours on why the bevel wouldnt work, This particular tutorial worked. The explanation is amazing
@5MinutesBlender9 ай бұрын
Really glad that it helped 😊 Cheers! 💝💝
@rimlingerlorenz62 Жыл бұрын
You're the goat man this bevel was making me crazy and the solution was so simple THX A LOT
@5MinutesBlender Жыл бұрын
Glad it helped! Cheers bro 💝💝
@HarvestrX2 күн бұрын
Select all vertices, merge by distance (as long as you don't have verts really close, this won't cause issues). That is what worked for me.
@5MinutesBlenderКүн бұрын
Yes, this is how we remove "duplicate" vertices (actually they are not always duplicates, but just very close that breaks the bevel) 👍 But it is only one of the many possible causes that gives rise to bevel issues.
@ypietrw6 ай бұрын
i was stuck for so long its embarrassing. thank you for the video!!!!!!
@5MinutesBlender6 ай бұрын
Glad I could help! 😊
@ASleep-er Жыл бұрын
Now this is a good guide for bevels. Just had some troubles with the bevels and it is now working fine. This is good guide.👍
@5MinutesBlender Жыл бұрын
Glad it helped! Cheers! 😊
@funkygentleman7370 Жыл бұрын
You are legend. You saved me from giving up on learning Blender
@5MinutesBlender Жыл бұрын
Glad I could help! 😊
@RacletteLynx4 ай бұрын
perfection, even after 2 years!
@5MinutesBlender4 ай бұрын
Glad it helped! 😊❤️❤
@MikkoRantalainen2 жыл бұрын
I actually like to use "Face orientation" setting and using 100% transparent color for the normal faces (in interface preferences) and bright red color for the backfacing faces. That way I can keep using that option all the time and I'll automatically get red highlight at any time the normals are reversed.
@5MinutesBlender2 жыл бұрын
Thanks for these nice tips! 👍
@spaceblox64943 ай бұрын
Thx so much, words cannot express how grateful I am
@5MinutesBlender3 ай бұрын
You are so welcome, I'm glad that it helped! 😊💝💝
@Evander_ExАй бұрын
Dude, I'm a beginner boy and you just saved my life =.=' new sub here ^_^
@5MinutesBlenderАй бұрын
I'm really glad that it helped you! 😊💝💝
@user-ob2ck4qw4t2 ай бұрын
thank you for your help, I've been struggling with the last problem for a very long time
@5MinutesBlender2 ай бұрын
Glad that it worked, happy to help! 😊💝💝
@knowledge_hub1 Жыл бұрын
All of them worked !! Thanks for discussing the cause in depth and giving the perfect solution 👌
@5MinutesBlender Жыл бұрын
Glad it helped! 😊
@GerardMenvussa2 жыл бұрын
4:43 you can also tick "face orientation", which might be more convenient for this situation
@5MinutesBlender2 жыл бұрын
Yes, thanks for this suggestion 👍
@enosunim13 күн бұрын
You saved my day! This was that normals thing!
@5MinutesBlender11 күн бұрын
I'm glad it helped! 😊💝💝
@falseshepherd6611Ай бұрын
You saved me from complete insanity - thank you!
@5MinutesBlenderАй бұрын
Glad to know that it helped! 😊💝💝
@edwin92195 ай бұрын
subscribed to your page because this is the second time I needed an answer to something and your page was the one to answer it, clutch thank you
@5MinutesBlender5 ай бұрын
Glad to know that I could help, twice! 😊💝💝💝
@lamski3286 Жыл бұрын
my problem was fixed within the first 3 mins of the video, thank you!
@5MinutesBlender Жыл бұрын
Great! 😊
@BorisRio2 жыл бұрын
Finally found the solution to my problem, thanks for sharing
@5MinutesBlender2 жыл бұрын
Glad to know that it helped!
@Ahtisham2 жыл бұрын
It was the scale problem for me, i had no idea what was causing it,i checked the face orientations but thank GOD found the right video,thanks a lot man
@5MinutesBlender2 жыл бұрын
Glad that it helped you! Cheers!
@Ahtisham2 жыл бұрын
@@5MinutesBlender 👍🏻👍🏻😊
@TomHaevy11 ай бұрын
The only solution that really worked
@5MinutesBlender11 ай бұрын
Glad it helped 😊😊
@vahsirht07175 ай бұрын
Thank you so much for this informational video!!! This helped me a lot to complete my project in time.
@5MinutesBlender5 ай бұрын
Cheers! I'm glad that it helped 😊💝💝
@vador601110 ай бұрын
Thank you so much ☺️… After two days of frustrating
@5MinutesBlender10 ай бұрын
Happy to help 😊💝💝
@wakurenai4822 жыл бұрын
thank you so much, That's very helpful for me. Now I understand is the scale problem for my model using bevel tool.
@5MinutesBlender2 жыл бұрын
Glad it helped!
@PravdovaSkronov6 ай бұрын
You save my day, thank you!!!!❤
@5MinutesBlender6 ай бұрын
Happy to help 😊💝💝
@aryanbalajipathak232 Жыл бұрын
thank you so much, i had 50 extra vertices unnecessarily. this helped me so much
@5MinutesBlender Жыл бұрын
Glad it helped 😊 Cheers!
@GingerbreadPanda Жыл бұрын
Awesome I was so confused, but this video fixed my issue.
@5MinutesBlender Жыл бұрын
Glad it helped! Cheers!
@hills8220 Жыл бұрын
THANK YOU HEAPS, just saved 8 hours of work
@5MinutesBlender Жыл бұрын
Glad it helped 😊 Cheers!
@jone98162 жыл бұрын
Had to flip a bunch of Normals, and it worked XD Thank you so much
@5MinutesBlender2 жыл бұрын
Glad it helped! Cheers bro!!
@ramonsilverio61832 ай бұрын
Thank you very, very much. you saved my project
@5MinutesBlender2 ай бұрын
Glad it helped you 😊💝💝
@TechWampus2 жыл бұрын
Amazing life-saver video!
@5MinutesBlender2 жыл бұрын
Glad it helped you!
@th3_t3rminator Жыл бұрын
i faced the issue and works fine with the first method thank you so much really apricated it.
@5MinutesBlender Жыл бұрын
Glad it helped! Cheers!
@stevenlitvintchouk3131 Жыл бұрын
You solved my problem with the Bevel modifier! Thank you! (I gave you a small donation)
@5MinutesBlender Жыл бұрын
Glad we could help you 😊 Yes, we have received your donation, thank you so much 💝💝💝
@fs0c1ety Жыл бұрын
Thanks mate, it worked. You earned a subsriber .
@5MinutesBlender Жыл бұрын
Glad it helped! Thanks for the sub 💝
@janisceplis87449 күн бұрын
Bro thank you so much. i literally love you
@5MinutesBlender9 күн бұрын
Glad it helped you! 😊💝💝
@billnoname80932 жыл бұрын
I did all 3 of these before I even came here, still no luck. But I will bookmark the video since it has the most common problems. thanks
@5MinutesBlender2 жыл бұрын
Thank you. There may be a different issue in your case, can you please share your blend file so that we can try to identify what could be the cause? Our contact details (Email IDs) are given in the About section of this channel. Thanks!
@billnoname80932 жыл бұрын
@@5MinutesBlender thanks, I had cut holes in the object using a boolean modifier, so I think that had a lot to do with it. So I started over and used the bevel modifier on the cube before I started changing the mesh. so this way if anything causes problems with the bevel I would know immediately. Until I get more experience I'll probably make that a habit. Thanks for the help
@SourceAwareness Жыл бұрын
Many Thanks, and wishing you a Great New Year!!
@luckysharma125 ай бұрын
Thank your🙏♥️ my problem the 1st one., thankyou again ✨
@5MinutesBlender5 ай бұрын
Glad it helped! 😊💝💝
@michaelmckenna24625 ай бұрын
Absolutly Amazing
@5MinutesBlender5 ай бұрын
Thank you so much! 💝💝 Glad it helped 💝
@anatolian6269 Жыл бұрын
gotta be one of the best videos
@5MinutesBlender Жыл бұрын
Thank you so much 💝
@staruberhater19732 жыл бұрын
Life saver!
@user-zs4iv3vf5m Жыл бұрын
very very useful tips for bevel , thank you!
@5MinutesBlender Жыл бұрын
Glad it was helpful! 😊
@sadralotfollahi6 ай бұрын
Thanks for your help ❤
@5MinutesBlender6 ай бұрын
Glad it was useful for you 😊💝💝
@tomei32 жыл бұрын
now everything is clear to me, thanks!
@5MinutesBlender2 жыл бұрын
Great! Cheers bro!
@VictoriaTretiakova10 ай бұрын
Big big thanks!
@5MinutesBlender10 ай бұрын
Thank you too! 😊💝💝
@mohamadhayatleh44882 жыл бұрын
Thanks for a great tutorial
@5MinutesBlender2 жыл бұрын
Glad you liked it!
@GraphicalAnuj4 ай бұрын
Thank you so much bro for this video
@5MinutesBlender4 ай бұрын
Glad it helped! 😊💝💝
@sparkiebarkie14 Жыл бұрын
Thank you! You’re the best, that is all
@5MinutesBlender Жыл бұрын
Thank you so much 💝💝
@mklolcraft69552 жыл бұрын
thank you very much
@CalmDownPanda Жыл бұрын
Very Great Tutorial !👏Thank you so much !
@5MinutesBlender Жыл бұрын
Glad you liked it! 💝💝
@iqbal08402 жыл бұрын
You are the man bro ,
@5MinutesBlender2 жыл бұрын
Thank you bro! 💝💝
@FloetschMaster2 жыл бұрын
THAAAANKS wow this errors got me mad!
@5MinutesBlender2 жыл бұрын
Glad to know it helped! 😊
@vikramsharma23892 ай бұрын
Amazing, thanks
@5MinutesBlender2 ай бұрын
Thank you so much 😊💝💝
@user-jv7eo7zq6p Жыл бұрын
Thank you so much. you are my hero :)
@5MinutesBlender Жыл бұрын
Glad I could help 😊💝💝💝
@dotina42678 ай бұрын
you save my day 😍😘🥰
@5MinutesBlender8 ай бұрын
Glad it helped! 😊💝💝
@ShebanFPV2 жыл бұрын
Many many huge thanks! It was sooooo frustrating!
@5MinutesBlender2 жыл бұрын
Glad you found it useful!
@ShebanFPV2 жыл бұрын
@@5MinutesBlender haha ))) I was ready to pull my hair out, it was so frustrating 😅🤦🏻♂️
@simplegarden87112 жыл бұрын
Thank you brother🤜🤛
@5MinutesBlender2 жыл бұрын
Cheers bro!!
@user-yd6ip6cs3m2 жыл бұрын
U save my nerve. THANKS!
@5MinutesBlender2 жыл бұрын
Glad to know that it helped! Cheers 👍
@GIANT-JAWSАй бұрын
thank you so much.
@5MinutesBlenderАй бұрын
Happy to help! 😊💝💝
@Kukatoo Жыл бұрын
so helpful!
@5MinutesBlender Жыл бұрын
Glad it was helpful! 😊
@6dangelodacosta95 ай бұрын
THE BEST!!!!
@5MinutesBlender5 ай бұрын
Thank you so much 😊💝💝
@Zns_07 Жыл бұрын
thanks a lot! i solved my problem !
@5MinutesBlender Жыл бұрын
Glad it helped! Cheers!
@Maddy._edits_4 ай бұрын
thanks
@jennies60392 жыл бұрын
Thanks for solving this problem. It is so helpful!
@5MinutesBlender2 жыл бұрын
Glad it helped! Cheers!
@wmh9783 Жыл бұрын
this was so helpful!!! thank you !!
@5MinutesBlender Жыл бұрын
Thank you too 😊😊 Glad it was helpful!
@indexOFrefraction Жыл бұрын
If you are using instances in geometry nodes you need to realize instances or the bevel modifier will not work
@red4209 Жыл бұрын
Thank you so much 😁
@5MinutesBlender Жыл бұрын
You're welcome! 😊
@chetlamanish90176 ай бұрын
thank you brother
@5MinutesBlender6 ай бұрын
You're most welcome! 💝💝
@AzureD2 Жыл бұрын
thanks to much for this video :)
@5MinutesBlender Жыл бұрын
Glad to know that it helped! 😊
@neginjahanfakhr4292 Жыл бұрын
So helpful! thanks!
@5MinutesBlender11 ай бұрын
Glad it was helpful! 😊
@r1zz1x Жыл бұрын
thanks very much
@5MinutesBlender Жыл бұрын
You're welcome! 😊
@roshanmartin3531 Жыл бұрын
wow, this was really helpful. Thank you :)
@5MinutesBlender Жыл бұрын
Glad it was helpful! 😊
@Anteprener Жыл бұрын
Thank u :)
@ben9441 Жыл бұрын
Not all heroes wear capes. God speed.
@SKYYY222211 ай бұрын
THANK U!!!
@5MinutesBlender11 ай бұрын
❤️❤️❤️
@AltayebAmer2 жыл бұрын
appreciate
@p.p.7844 Жыл бұрын
thank you ;)
@5MinutesBlender Жыл бұрын
Glad it helped! 😊
@johndilauro4884 Жыл бұрын
...........finally, thank you........
@5MinutesBlender Жыл бұрын
Glad it helped! 😊
@johndilauro4884 Жыл бұрын
I like the results, when it worked. but I would just give up. @@5MinutesBlender
@kolar91142 жыл бұрын
Well explained , keep going
@5MinutesBlender2 жыл бұрын
Thank you bro 💝
@malithraheem30442 жыл бұрын
this was very helpful
@5MinutesBlender2 жыл бұрын
Glad you liked it!
@pamecv46284 ай бұрын
TE AMO, gracias :'D
@5MinutesBlender4 ай бұрын
Glad it helped! 😊💝💝
@COOLACADEMYFORPHYSICSANDMATH2 жыл бұрын
Thanks bro, yesterday i was facing this problem, now i get to know. But one issue also i was facing that i do shade smooth but faces are not getting smooth, they have line of meshes vertical, why is it so.
@5MinutesBlender2 жыл бұрын
Shade smooth may not give correct result if the geometry of your object is not clean. Incorrect normals, or duplicate vertices can be some of the issues. Please inspect around the area where shade smooth fails. You can go into the edit mode and check what is wrong.
@COOLACADEMYFORPHYSICSANDMATH2 жыл бұрын
@@5MinutesBlender ok, thanks
@MohtashimHassan2 ай бұрын
good
@5MinutesBlender2 ай бұрын
Thank you! 💝
@digimikeh2 жыл бұрын
This is gold
@5MinutesBlender2 жыл бұрын
Thanks a lot! 💝💝
@febinjose45972 жыл бұрын
very helpful
@5MinutesBlender2 жыл бұрын
Thanks!
@JP-zu5gr5 ай бұрын
Hello Derek. I have a problem in 12:10 with the bevel modifier, it is not working correctly. There is showing more connections with other faces and other stuff. Could you say waht is the problem?
@5MinutesBlender5 ай бұрын
There can be some specific issues with specific models, hard to guess. But if none of the stated methods solves your problem, you can select all in the edit mode and try to do a Limited Dissolve. If still not able to resolve, you can send your blend file as-is to us at 5minblender@gmail.com and we will investigate it. Thanks!
@phucho38375 ай бұрын
omg it worked. Thx alot XDDD
@5MinutesBlender4 ай бұрын
Glad it helped! 😊💝💝
@juno-ik1ik Жыл бұрын
tq so much for solution .... uwu
@5MinutesBlender Жыл бұрын
Thank you too 😊
@isimsizkullanc84114 ай бұрын
goated video
@5MinutesBlender4 ай бұрын
Thank you so much bro! 😊❤️❤️
@blood.mirror Жыл бұрын
What computer voice software did you use for this? And which specific voice within that package? Thanks!
@vladapanchenko5768 Жыл бұрын
Hello and thank you for the video. I have had a problem with Bevel modifier. This modifier was connecting the vertices that were not connected normally and disconnecting some of the vertices that were making a face together. None of the sollutions you have told were working for this problem, the vertices were correct, normals were also for each face and scaling was not an issue. Then I tried to add bevel with using edit mode menu (also for all the object) and there was no such troubles. Do you know what could be a possible reason for this? Thank you.
@5MinutesBlender Жыл бұрын
I have experienced this too. There is one difference between the Edit tool and the modifier although the underlying functionality is almost the same. The modifier uses a "Limit Method" which determines which edges or which vertices to be included into the bevel (and this may not be always the same as what we intend to do) whereas the same tool in the Edit mode uses an explicit edge selection i.e. it includes only the edges we specifically selected for this operation. I guess this may be a reason why you saw a difference in the results from both of these methods, although I must say that some beveling issues can be too complex to explain, at least in my experience.
@JoALemusBLoG2 жыл бұрын
Fuuuuuuc**** thaaaaaanksssssss!!!!!!!!!!!
@ryanpatton1795 Жыл бұрын
Just made my object bevel even worse after trying tip 1 and 2. I already had tried tip 3 from prior research. Not sure why a default cylinder would be so jacked up with nothing done to it.
@5MinutesBlender Жыл бұрын
We covered some common use cases, but an object can have other type of issues that may need some specific handling. We can help you further if we get to see your blend file. Our contact details are given in the About section of this channel. If you can send your blend file, we will look into it and suggest a fix. Thank you!
@chriswestphal26 Жыл бұрын
Eh didnt work. Removed vertices but yet when i try to add bevel to an edge on the object it makes segments but only on one of the faces of the corners, instead of both, keeping it flat.... doesnt make sense
@5MinutesBlender Жыл бұрын
There may be some rare cases outside the common errors we have discussed in this tutorial. For each of such cases, the solution may be different. So if you can send your model to us (5minblender@gmail.com) we will be able to investigate the issues and suggest a fix. Thank you!
@alicesophiabergamo56347 күн бұрын
Dio Grazie
@5MinutesBlender7 күн бұрын
😊💝💝
@DominikWysocki-ml2he Жыл бұрын
Look thank you.....but really do wish Blender stuck to the same blimmin format of bevelling, like all other softwares. It shouldnt be worthy of finding a solution on the internet to do a basic 45 degree bevel.
@5MinutesBlender Жыл бұрын
Completely agreed with you. I don't have enough experience with other modelling software, but I know why Blender struggles with this. Blender uses a polygon-based approach for mesh objects. Instead, if we use a curve-based or a vector-based approach, it becomes a simple task. For example, if you try to bevel any text field (before you convert them into mesh), you'll notice how beautifully and how effortlessly it is done in Blender. In fact, I am thinking of creating an add-on that can make this bevel job easier by shifting the bevel part to a vector-based algorithm.
@DominikWysocki-ml2he Жыл бұрын
@@5MinutesBlender Oh my goodness. That would be so awesome! if you could. Thanks for the reply, have a great weekend.
@DominikWysocki-ml2he Жыл бұрын
@@5MinutesBlender One more thing that sticks in my ass is Blender's really crappy UV layout system. It's really bad. They dont even have a 'relax' function, which splays out the entire mesh like Maya does it. I've got a really complex shape to do a spiral column, and no matter which function I press, it's impossible to have the UV grid to be squarish. So I have to map out section by section using the (project from view) patch it up like a jigsaw puzzle. So annoying. You'd think the function of using the (mark seam) then unwrap would work, but it just doesnt. With Maya, you could select the whole thing, and press relax, and it would splay it out in a second! It'll take me about 2 hours to do a basic job. Argh. The pain.
@5MinutesBlender Жыл бұрын
@@DominikWysocki-ml2he I can understand bro 🙂
@Noodleydoo Жыл бұрын
So infuriating. I open the mesh dialogue box and there is no merge function listed.
@5MinutesBlender Жыл бұрын
Hey, that's surprising. May I know which version of Blender are you using? And can you also send me a screenshot so that I can check? Our contact details are given in the About section of this channel. Thanks!
@rafadlis Жыл бұрын
live-safer
@5MinutesBlender Жыл бұрын
Glad to know it helped! Cheers!
@zefishaulava4 ай бұрын
none of these were my problem (wtf is up with my model???)
@5MinutesBlender4 ай бұрын
Sometimes it may be really difficult to get the bevel effect corrected due to the underlying geometry (or better to say, every geometry has a threshold up to which a bevel will work and beyond which the bevel will break). There are some advanced mesh editing that can help in some cases apart from the common techniques we discussed here, but there are always some 5-10% cases that are impossible to solve without remodeling 🙁