No video

6 Areas That Need Spray Foam Insulation In Your Home - And Why

  Рет қаралды 182,151

Spray Jones

Spray Jones

Күн бұрын

The 6 spots that we have identified as the most worthy to receive spray foam insulation, and why they do.
www.sprayjones....
4 Pitfalls of spray foam insulation • 4 Pitfalls Of Spray Fo...
Unvented roofs - Closed cell or Open cell • Unvented roofs - Close...
Open cell foam • What is Open Cell Spra...
5 failures and why • 5 Spray Foam Insulatio...
How much foam do I need? • How Much Spray Foam In...
What Conditions do we need to apply? • What Conditions Are Ne...
Burning the SPF • Burning Spray Foam Ins...
SPF in contact with ground • Spray foam Insulation ...
Shingle life and SPF • Shingle Life and Spray...
The most dangerous SPF installers • Who are the most dange...
Why is our foam purple? • Why is our spray foam ...
Best practices for your basement • Best practices for spr...
Why is spray foam insulation safe and effective? • Why Is Spray Foam Insu...
The 10 Commandments of Spray Foam Insulation • The 10 Commandments of...
Can we inject spray foam into walls? • Can Foam Insulation Be...
www.walltite.ba...
www.bbb.org/sa...
www.yellowpage...
sprayjonesinc

Пікірлер: 225
@flyonbyya
@flyonbyya 3 жыл бұрын
I’ve been an energy auditor for 25 years in Michigan. All the expressed concepts and practices expressed by the presenter are 100% accurate and factual. I simply tell everyone that “Foam kills 8 birds with one stone”!
@SprayJones
@SprayJones 3 жыл бұрын
Thank you.
@normrubio
@normrubio 2 жыл бұрын
During the lumber price spike, we went from going with 2x6 for the exterior walls to 2x4 and completely filled the cavity with closed cell. Saved on the total cost, got the insulation, and added strength.
@Fedgery007
@Fedgery007 Жыл бұрын
So basically cheaped out on the building quality. Great job!
@lehaim18
@lehaim18 4 жыл бұрын
By the way, great video and super professional performance of workmanship !
@SprayJones
@SprayJones 4 жыл бұрын
Thank you very much!
@88cruzer1
@88cruzer1 4 жыл бұрын
Another great video. The basement of our house that was built in 1916 was sprayed with closed cell 3 weeks ago. The walls are concrete. There was a lot of leakage in our rim joists. Now there’s a huge difference in temperature. It used to be cold down there. Now its nice and toasty. Im glad I went with spray. Your videos convinced me of that. The guy has been in the business since 1977 and knows what he’s doing. He said it should pay itself off in 5 years. I would have hired you if you were in the US. Time to expand.
@SprayJones
@SprayJones 4 жыл бұрын
Thanks for the great testimony. Glad we helped in the decision that is what this channel is all about.
@flinch622
@flinch622 2 жыл бұрын
One of the best info channels I have seen on YT. Thank you!
@SprayJones
@SprayJones 2 жыл бұрын
Glad it was helpful!
@martinbarazorda6539
@martinbarazorda6539 4 жыл бұрын
I am a Contractor by trade, I must said, GREAT JOB!
@henryhenry5897
@henryhenry5897 4 жыл бұрын
So it seems u never had issues with 1.5” ... idk I’m always a bit worried and spray 2” min since I’m scared it would not be enough thermal break but ur 10 times longer in business! I enjoy the videos lots of good information!! And of course I like to watch u Guys spraying that butters cheers
@SprayJones
@SprayJones 4 жыл бұрын
I have jobs sprayed with an inch. A lot of commercial specs here call for 2 inches, like on concrete etc.
@T.E.P..
@T.E.P.. 2 жыл бұрын
Well it's me again ... your vids are popping up a lot! Superb job on educational video here ... Impressed with the sound levels too and the voice over. Awwesome hope you have a great weekend.
@SprayJones
@SprayJones 2 жыл бұрын
Welcome back!
@andyjf717
@andyjf717 3 жыл бұрын
We were thinking about doing the foam from the outside because we have some finished rooms. This video builds up the confidence level. Thanks!
@SprayJones
@SprayJones 3 жыл бұрын
Glad it was helpful!
@rickbabcock6397
@rickbabcock6397 2 жыл бұрын
In my garage I had 2 inch closed cell sprayed in 2x4 wall and 4 in under roof. I'm in Denver . I have a 30 Amp electric heater and set on low it keeps garage above 50 degrees for less than20 dollars a month and that's with shop tools and lights. Love the foam , it's worth the $4,000 for insulation in 24x32 garage. Spend the extra money.
@SprayJones
@SprayJones 2 жыл бұрын
I agree. Thanks for the testimony.
@stevenwoodard1886
@stevenwoodard1886 Жыл бұрын
Do you recommend venting above a vaulted/cathedral ceiling where the under belly of the roof has been spray foamed? This is for a new 4 season cottage in Canada so we are going to be dealing with very hot and very cold temps throughout the year. Thanks
@rodneyfranks2726
@rodneyfranks2726 3 жыл бұрын
If you do a very old house that would be a neat video as well. Super professional Bob Villa level!
@MarlonJoseGE
@MarlonJoseGE 3 жыл бұрын
My house was built in the early 50's and has plenty of cold spots. I looked into doing spray foam but found it too costly for my budget. Opening up the walls is the right way to go but I'm afraid to find the unexpected.
@SprayJones
@SprayJones 3 жыл бұрын
Thanks for sharing
@steved9746
@steved9746 3 жыл бұрын
So my question for inside roof applications is how are roof repairs dealt with? Many people discover that it's time to repair their roofs when they start leaking. It would appear that with a closed cell application that roof damage would almost never be discovered or seen until the roof had visibly degraded to the point that it needs replacing.. At that time a waterproof under barrier could conceal potentially years of damage to the plywood roof sheathing.. And since the system bonds itself to the plywood and trusses/rafters it would make replacing or repairing that damage problematic. Just curious if that is an issue and how is it dealt with as that is one of the concerns we have before moving forward with a retrofit/spray application in our own attic..
@SprayJones
@SprayJones 3 жыл бұрын
Please watch our video "closed cell vs Open cell for roofs, which is better".
@louvee5009
@louvee5009 3 жыл бұрын
The joist ends do not get insulated or protected from moisture when you close cell them. Closed cell on the outside could solve, but blow grade to protect the foam.
@Paulxj-
@Paulxj- Жыл бұрын
what is the dimple mat on the concrete?
@mikeumpire698
@mikeumpire698 3 жыл бұрын
Big fan of spray foam something you didn't mention.. I saw a concrete co. spray foam 2" directly on ground, then poured over. Something I'm not sure is directly on bottom of Roof sheathing. If you have a leak will not know and alot of damage can happen. Thoughts?
@SprayJones
@SprayJones 3 жыл бұрын
I already have a video on that subject. Check out the vaulted roof playlist.
@beachboardfan9544
@beachboardfan9544 2 жыл бұрын
My understanding is that you shouldnt insulate the inside of a concrete foundation, because if theres a water management failure, like failed gutter, or improper soil grading, and pooling water near the foundation that'll freeze in the winter, it'll cause frost heave on the foundation. Maybe its different in the south, but here (PA) insulation is usually applied to the exterior of the foundation.
@SprayJones
@SprayJones 2 жыл бұрын
That is not accurate. We are in some of the coldest climate in North America & Building code since 2010 is mandatory to have a basement insulated. 99.999% are done from the inside.
@rubenrodriguez4863
@rubenrodriguez4863 4 жыл бұрын
Have to remodel a bathroom and took some sheet rock off the wall. To my surprise I have a few spaces that had no insulation in exterior wall. It was stucco, wire, and seem like vapor barrier, studs than sheet rock. Empty wall spaces seems like very poor construction. Home was built in 1992 in Las Vegas would spray foam be a better choice in this hot climate?
@SprayJones
@SprayJones 4 жыл бұрын
Hmmm, let me think..... YES.
@mattkesler871
@mattkesler871 3 жыл бұрын
Mike thanks for all the great information. Where can I find Documents or literature stating or certifying that 2 inch close cell performs better than an R 38 traditional material. I am trying to convince a inspector the how air seal is more important than just the r value.
@SprayJones
@SprayJones 3 жыл бұрын
If he is stuck on R value alone you cannot. The foam will be an R 13 and the R38 is just that. So if he has to satisfy a number you either hit the value or find a loop hole to avoid it, like vaulted ceiling values vs flat ceiling values, or you get a building envelope engineer to write your values and seal it. I will be having a resource center on our web site soon for research reports.
@elmerkilred159
@elmerkilred159 2 жыл бұрын
I guess my only hangs up are that I'm not sure whether to use open or closed cell... Spraying insulation on the inside of a basement that doesn't have insulation on the outside (where soil frost level is 26" deep) I'm worried about holding/cutting off the vapor and having the basement walls crack, and encapsulating the underside roof decking may cause roof rot on the decking... IDK... I almost need a time machine so I can see 20 years into the future to see how this stuff holds up.
@SprayJones
@SprayJones 2 жыл бұрын
Closed cell when in ground. Watch the open cell playlist to know more.
@josephmerritt1411
@josephmerritt1411 Жыл бұрын
Most of the pictures with 2x4 showed 2-inch spray foam? Is there a limit meaning can you fill the entire space (3.5-inch spray foam) or are there other issues?
@LRBennettInc
@LRBennettInc 3 жыл бұрын
I have always talked my customers into closed cell foam any opportunity I can get. It is a great solution for everything you mentioned in this video. My question would be do you recommend a foil vapor barrier between the roof sheathing and the insulation? Thanks for the video.
@SprayJones
@SprayJones 3 жыл бұрын
No you do not. SPF - closed cell- properly installed is a stand alone product when caulking is used to fill gaps the foam cannot get into. Thanks for your good word on the foam!
@asmrcindyc6939
@asmrcindyc6939 2 жыл бұрын
I have a 10 x 20 wooden shed with the spray on vapor barrier of the silver stuff and I’ve already insulated the walls with fiberglass because I couldn’t get Rockwall and put the plastic six mill vapor barrier over it and taped it with a special red tape. I put rafter baffles up to the ridge vent but left the ridge vent exposed on the inside. Now I’m considering spray foam to rip the baffles off the ceiling or leave them I’m so confused. I also will be living in it full-time in the south but there’s lots of humidity. It’s a barn loft so I want everything to be expose so I can use the loft for my altar and a spare bed
@georgioantoine4194
@georgioantoine4194 Жыл бұрын
Can the floor crawlspace be sprayed too?
@armandoyourpersonaljeweler7558
@armandoyourpersonaljeweler7558 Ай бұрын
I plan on doing a metal roof with zip OSB sheathing. And close cell spray foam insulation underneath on the inside. Do you recommend having a ventilated roof and ceiling off the attic completely with the spray foam?
@SprayJones
@SprayJones Ай бұрын
I recommend non-vented roofs when they are done right. Watch the 4 part series on non-vented roofs in the roofs playlist.
@armandoyourpersonaljeweler7558
@armandoyourpersonaljeweler7558 Ай бұрын
@@SprayJones I meant to say that I’ve seen some give their opinions to do a ventilated roof only and it closed off attic that’s not ventilated to prevent rodents from getting in. And maintain controlled air conditioning. The thought on the ventilated roof was to prevent condensation from leaking into the attic.
@jacec5855
@jacec5855 10 ай бұрын
whats the density on that foam he is spraying?
@johnhoffner1609
@johnhoffner1609 Жыл бұрын
Mr. Jones the part you're not understanding is the tighter you get at home the more air leakage you get through the fewer holes when your house is under negative pressure is all about positive and negative pressure in your home which is a heating and ventilation issue not an insulation issue
@Chris-my2gs
@Chris-my2gs Жыл бұрын
What is the reason for the dimple mat on the walls of one of those basements being sprayed?
@SprayJones
@SprayJones Жыл бұрын
Internal drainage to weeping tile. It is a retro fix from inside instead out outside at X3 the cost.
@neckofthewoods24
@neckofthewoods24 3 жыл бұрын
You mention the roof decking with no air flow...in my area you need an R49 ceiling. I’m going for an R60. With 2x4 truss top cords if you do 3.5” of closed cell are you passing code at only R24.5? I thought you mentioned closed cell vs other types aren’t 1:1 so a ceiling my not need a R49 to pass. But now you are heating and cooling that attic. Mines over 12,000 cubic feet. Seems like a lot of area to heat and cool.
@SprayJones
@SprayJones 3 жыл бұрын
1. Specs are different for vaulted/cathedral ceiling. The foam is installed to those standards NOT the flat ceiling spec for blow in. 2. All our install have been engineered and stamped. They are on file with the permit office in each jurisdiction. It is to that standard that we install and they inspect to which is NOT a fibrous spec. 3. Go watch my video on "does it cost more to heat this way" 4. You are still talking about R value like you are buying a used car. The number is meaningless because you are measuring 1/3 of the heat loss equation under perfect lab conditions. Convective loss has far more to do with insulating than conduction.
@123mikerourke
@123mikerourke 3 ай бұрын
Rafter rot in our 100 year old home’s attic…..seems to be a humidity control problem during the cold canadian months eventhough our attic has 6-8 inches of spray foam the roof….if had to do over, would not spray foam
@SprayJones
@SprayJones 3 ай бұрын
6-8 inches of closed cell??
@123mikerourke
@123mikerourke 3 ай бұрын
@@SprayJones open cell
@SprayJones
@SprayJones 3 ай бұрын
@@123mikerourke That's the reason for the issues. You need vapor control with open cell SPF. Liquid applied or sheet products.
@123mikerourke
@123mikerourke 3 ай бұрын
@@SprayJones ok. Do you have brand names for either solutions ? What about mechanical means of controlling humidity ? Air exchanger ? Thanks for the exchange.
@CGphotoOp
@CGphotoOp 2 жыл бұрын
Would it be a waste of money to spray foam with closed cell in a vented attic?
@karenoshea8642
@karenoshea8642 2 жыл бұрын
Hey Spray, I love your videos. Rim joists -- is it ok to spray foam into a rim joist bay that has a metal rim joist hanger, like for a dropped down design? Will the spray foam adhere to the metal or degrade it over time? Thanks
@SprayJones
@SprayJones 2 жыл бұрын
No it will not damage metal. I cover this in the "what can we spray to video"
@rolandwells8398
@rolandwells8398 3 жыл бұрын
Can I use 2" rigid foam in the walls and seal the perimeter of each sheet with blown in foam?
@SprayJones
@SprayJones 3 жыл бұрын
Yes. You can also walk on hot coals if you move fast enough...
@ThatKiltedGuyDIY
@ThatKiltedGuyDIY 3 жыл бұрын
Hey just recently found your channel and love the videos. I have watched several of them so far but as another KZfaqr I have to ask what microphone you use? On my stereo I’m hearing a lot of plosives which is often indicative of the microphone being too close to your mouth, or needing a plosives screen, or even the wrong microphone which I did for years. I switched to a cardiod lav microphone and it greatly improved the sound. Also, which is better for sound dampening,, open cell or closed cell? my KZfaq channel is doing well and I plan on building a 4000 square-foot shop/office and then a custom home in the next couple of years and I love spray foam. Thanks for the info
@SprayJones
@SprayJones 3 жыл бұрын
You are watching older videos. I now have a better mic and a pop filter. It has been a process creating, editing and improving. Some of the older vids are hard to watch, I recently deleted 25 of the oldest and roughest. So hence my goal to do 25 vids in 90 - 100 days. Choose SPF for the thermals and correct match for your environment first. Then look at the acoustic last. I will be doing a video on comparing the two late on.
@SophiaAphrodite
@SophiaAphrodite 2 жыл бұрын
UP next in "Blow in Insulation Steve's" video. They discuss 7 places that need insulation in your home. These 6 and one more not mentioned............... so your house does not become a torch in case of a fire.
@rockysautosales1223
@rockysautosales1223 4 жыл бұрын
Hi there, Looks like you do great great work and all it top quality stuff! Question? I’m dealing with a 100 year old house, live in Massachusetts. outside walls are 2x4 and I’m in the process of renovating the whole first floor, took out the blow in insulation and I want to go with foam of course. Should I use closed or open cell in the outside walls ? Also what should I use in the ceiling insulation. The whole floor is gutted out, floors walls ceiling. Thx in advance
@SprayJones
@SprayJones 4 жыл бұрын
I am a big fan of closed cell. It is the rolls royce of spf. However it will have to fit your budget. Open cell is better than no SPF.
@squeekhobby4571
@squeekhobby4571 3 жыл бұрын
Great points as always. Appreciate the content. BEST. Can you clarify the below. 1. Do you recommend rafter vents baffle for air circulation beneath the roof seathing and insulate under the baffle? If not how will there be moisture or condensation beneath the roof seathing. 2. If the basement contains cinder blocks, applying foam insulation, will it not make the cinder blocks moist due to water from outside? For concrete foundations, I see very bad waterproofing on the outside. How will this affect if we do foam insulation from inside to the basement walls.
@SprayJones
@SprayJones 3 жыл бұрын
1. I have a whole playlist on vaulted unvented roofs where the science is explained in great detail. So please watch. 2. Cinderblocks, well you need to stop the water from the outside for sure, but then apply the foam on the inside to seal all the joints and back up the block with rigid support.
@squeekhobby4571
@squeekhobby4571 3 жыл бұрын
@@SprayJones : thanks . Looking forward
@mascotbenches5146
@mascotbenches5146 3 жыл бұрын
Do you reccomend any company in the salt lake city area? I have an old barn im trying to turn into a sculpture studio. Needs to be warm for models without huge energy output. Worried about the condensation thing but the average humidity hear is really low.
@SprayJones
@SprayJones 3 жыл бұрын
No, sorry
@rudolphguinta4127
@rudolphguinta4127 2 жыл бұрын
Love your channel trying to learn more about spray foam I’m looking to insulate a 2 x 4 renovation full house , But when I speak to contractors what I’m being told is a house needs to breathe that spray foam closes it up what are my options and is that true
@SprayJones
@SprayJones 2 жыл бұрын
I have a video dedicated to answering the too tight question. It is in the 101 SPF playlist.
@aayotechnology
@aayotechnology 3 жыл бұрын
Do you have another video that goes into more detail about the cross-ventilated option for insulating between joists in a ceiling?
@SprayJones
@SprayJones 3 жыл бұрын
I will be. Before March is out I will be into a 4 part series on cathedral ceilings.
@pablosanchez2428
@pablosanchez2428 3 жыл бұрын
Great videos, I like the idea of spray foam at roof. Does the space above the ceiling need to be conditioned?
@SprayJones
@SprayJones 3 жыл бұрын
It will be naturally. All codes for us require that it be included in the HVAC system sizing. A moot issue.
@nvy2fd588
@nvy2fd588 2 жыл бұрын
In the crawlspace, instead of spraying the underside framing of the upper the floor, I’m looking to spray the concrete block walls, and the slab to reduce humidity and coldness. It would then be somewhat of a heated space because the crawlspace is partially raised and it’s ceiling is on par with the height of my basement ceiling which shares a drop ceiling that allows warmed air into the crawlspace. Anything wrong with that idea ?
@SprayJones
@SprayJones 2 жыл бұрын
Nothing wrong. We do that all the time. Watch the video "in contact with ground" for more info.
@asmrcindyc6939
@asmrcindyc6939 2 жыл бұрын
Thank you
@gregorylondos534
@gregorylondos534 2 жыл бұрын
I wish you worked in Southern Idaho... ? Greg
@reyvinsiegel9386
@reyvinsiegel9386 2 жыл бұрын
Here in Virginia we have to leave a termite Gap near the seal plate. In that instance spraying in the joints bays wether basement or crawl space might not be possible. Have you come across this?
@SprayJones
@SprayJones 2 жыл бұрын
Yes. The whole termite issue is one that needs more discussion on. I will be doing a longer video on that.
@robertbonesio5498
@robertbonesio5498 3 жыл бұрын
What about injection cell for concrete block construction. With the inside walls that have 1/2in PT straps for the drywall.
@SprayJones
@SprayJones 3 жыл бұрын
Concrete block can have foam inside. Since they are staggered it is an issue to get all the way to the bottom unless you fill sequentially as you lay so may courses of blocks.
@rasheemsanford9348
@rasheemsanford9348 4 жыл бұрын
Is spraying the gable walls mandatory?
@priscillagrote3927
@priscillagrote3927 3 жыл бұрын
If I am wanting to add spray foam to the rafters but I already have ventilation in the attic due to the insulation originally being batting on the floor, is that a problem?
@SprayJones
@SprayJones 3 жыл бұрын
You have to convert the attic from vented to non-vented. So if SPF it to the roof deck no vents are used, close them off. But ONLY if you can properly get things sealed so you won't have condensation.
@fairylynbang9574
@fairylynbang9574 2 жыл бұрын
How to apply thank you
@SprayJones
@SprayJones 2 жыл бұрын
Email through my web site.
@lancerudy9934
@lancerudy9934 3 жыл бұрын
Very nice. Thanks
@SprayJones
@SprayJones 3 жыл бұрын
Most welcome
@turboflush
@turboflush 3 жыл бұрын
Block cmu wall foam injection? Had a guy try to sell that to me instead of lining the inside with the reflective foam board. It wont be a balanced insulation because the foam wont always reach everywhere and there are solid columns of concrete in the cmu. He claimed it was a higher r-value than the foam board.
@SprayJones
@SprayJones 3 жыл бұрын
Good for you looking at the big picture.
@tnngo1
@tnngo1 3 жыл бұрын
What is your opinion on closed cell sprayed to the underside of the attic for old home built in 1909?
@SprayJones
@SprayJones 3 жыл бұрын
Do them all the time. Watch the playlist for vaulted roofs to get more info. I will be doing a video on older homes and using SPF.
@boyceunplugged
@boyceunplugged 2 жыл бұрын
Where are you located?
@johnwhite2576
@johnwhite2576 2 жыл бұрын
re valued ceilings -ou code requires them to be drywalled or ahem other fire resistant coding ! that a not insignicianf expense
@mrsoccergod5001
@mrsoccergod5001 3 жыл бұрын
Can you completely cover hvac ducts with the foam. Without covering the ducts with anything
@SprayJones
@SprayJones 3 жыл бұрын
Yes, have a video on that. Please watch it.
@James-lo5ne
@James-lo5ne 3 жыл бұрын
I hope you read old video comments, I was considering adding foam to the basement. Would it help to prepare the issues? I have plaster and paint over cinder block all and the joists have been there for 120 years and are dingy looking. I have an older masonry brick house. Do you all recommend spraying those? The walls in my home are very cold in the winter. I assume from what i can see that it was filler with some kind of fluff but its all sank over time. I've seen mixed things on if its possible with masonry homes.
@SprayJones
@SprayJones 3 жыл бұрын
1. Yes you can spray masonry homes. Biggest commercial brick building in town was done by us. I will do a video about it because the building envelope specialist bitch slapped the architect in a letter about his reluctance to use SPF. 2. Clean up the walls. I have a video on "what can SPF stick to". Check it out.
@James-lo5ne
@James-lo5ne 3 жыл бұрын
@@SprayJones Thats good to know, I've seen so many people claiming that the brick wicks so much moisture it will cause it to become brittle over time. I just want heating bill under 200 lol.
@markhindman9005
@markhindman9005 4 жыл бұрын
When spraying an attic to make it a conditioned space, are you required to cover the foam with a fire rated product like a fire paint or something else?
@SprayJones
@SprayJones 4 жыл бұрын
No. Our building code exempts attic spaces, regardless of size and dimensions
@cdmichaelb
@cdmichaelb 3 жыл бұрын
If I want sound dampening, do you just spray the sound dampening foam over the regular closed cell foam?
@SprayJones
@SprayJones 3 жыл бұрын
Not usually. You need 3-4 inches of open cell to make a difference.
@caljay1000
@caljay1000 4 жыл бұрын
Thanks for the information. With 2x4 walls.. if u use 2 " of foam do u need to fill the 1.5" air cavity before the sheet rock is installed? I'm in central California valley.
@carlfrase8097
@carlfrase8097 4 жыл бұрын
Jay Bietz no you shouldn’t at least not in nc.. depending on the code for where you’re at.. 2” of foam is an R-15 which is up to code for a 2x4
@caljay1000
@caljay1000 4 жыл бұрын
@@carlfrase8097 thanks for the reply.. I'll not worry about the void between the foam and sheet rock. Jay
@SprayJones
@SprayJones 4 жыл бұрын
I concur. Jay beat me to the answer.
@carlfrase8097
@carlfrase8097 4 жыл бұрын
Jay Bietz the void really means nothing.. the foam is not only a insulation but a sealant (closed cell) so the void you are worried about is nothing at all but a little extra space (almost like putting left overs in a tuba-ware container.. and having that little void between the food and the lid.. it’s nothing at all lol)
@caljay1000
@caljay1000 4 жыл бұрын
@@carlfrase8097 thanks for the good advise..
@andrzejkalandyk9188
@andrzejkalandyk9188 4 жыл бұрын
Hello Can I spray closed foam on the roof between rafters. What about ventilation.?
@SprayJones
@SprayJones 4 жыл бұрын
Watch our videos about non-vented roofs. Or low slope roofs
@rasheemsanford9348
@rasheemsanford9348 4 жыл бұрын
Is that closed cell in the attic? Also, is it ok to apply 2” to the top side of the crawl space and rim joist (totally isolating that space from the house above) as opposed to the walls/rim joist?
@SprayJones
@SprayJones 4 жыл бұрын
Yes closed cell being used. 2" to top of CS, yes we have done this for cold crawl spaces. If they are heated we spray the perimeters.
@sapulpaorganics5402
@sapulpaorganics5402 3 жыл бұрын
Can I put fiberglass bats over the spray foam to help with insulation in my ceiling? I can't afford to completely fill the 2x6 rafters and the fiberglass is already purchased
@SprayJones
@SprayJones 3 жыл бұрын
Go watch the "flash and fill" video on that subject
@jefferykeeper9034
@jefferykeeper9034 2 жыл бұрын
Is it a good idea too use spray foam on the outside of a basement ?
@SprayJones
@SprayJones 2 жыл бұрын
Yes. Have a whole video on that. "In contact with ground"
@brandonjackson4857
@brandonjackson4857 3 жыл бұрын
Nice video! Hopefully you can give me some wise advice! I just had open cell installed in the floor joists of my modular home. The crawl space is still exposed to outdoor elements because it only has plastic vented "underpinning" or "skirting". It does have 6 mil plastic on the ground but it's not in the best shape. Under the plastic is dirt and the bottom of the insulation averages between 2.5 and 3 feet from the ground. What would be the next steps to create an efficient insulation system? Should I install a tyvek type material against the foam and joists to prevent moisture from rising into the open cell? Should I attempt to encapsulate the crawlspace and try to make it air tight? Should I be more concerned with installing new plastic on the ground? Thanks in advance!
@SprayJones
@SprayJones 3 жыл бұрын
I know too little about your personal situation to advise you on next steps. There are many variables left out that need consideration.
@brandonjackson4857
@brandonjackson4857 3 жыл бұрын
@@SprayJones Thanks for the response. What types of variables would you be referring to?
@TM-173
@TM-173 2 жыл бұрын
If you seal (spray foam) the porous concrete basement or crawlspace foundation walls, won't that just stop water infiltration only right up that point? So essentially water will seep from the exterior thru the concrete and have no where to go, stopping at that spray foam barrier. Couldn't that actually cause water entrapment in the foundation wall & therefore cause serious erosion/ cracking issues?
@SprayJones
@SprayJones 2 жыл бұрын
Waterproofing is always needed on the exterior no one is saying to forgo that. What the SPF does on the inside is a bonus and helps double up the protection.
@TM-173
@TM-173 2 жыл бұрын
@@SprayJones ok thanks for your reply, just curious b/c a lot of existing homes/ foundation walls are buried below grade & have no exterior vapor barrier/ Kilz and if they did, the dirt likely already degraded it. I'm just concerned the water would somehow get trapped right up to the SPF & just saturate /never leave?
@deanjones7220
@deanjones7220 4 жыл бұрын
Hi Spray Jones, Quick question; I have an older farmhouse recently gutted and renovated. I went with batt insulation when I put her back together. My house is framed out if old growth barn wood. My Contractor said that we could not use spray foam because wood needs to breathe and that it could begin to rot if we used spray foam. How do you spray older homes like mine? Thanks !
@SprayJones
@SprayJones 4 жыл бұрын
What rubbish. We aren't encapsulating the wood in spray foam. Plus how much moisture do you think is left in old growth barn wood? You got bamboozled.
@deanjones7220
@deanjones7220 4 жыл бұрын
@@SprayJones Thanks 👍
@ronrichards2691
@ronrichards2691 3 жыл бұрын
I have sprayed 200 year old barn up here in Maine a bunch of the some were done 18 years ago not one problem yet
@RogerWilsonTodd
@RogerWilsonTodd Жыл бұрын
Doesn’t spray foam cause health problems for the residents?
@alextorres6205
@alextorres6205 3 жыл бұрын
Great videos!! I’ve recently decided that I want to get into the spray foam business her in Texas. I have been doing my research and scheduled some training with BASF but you as a professional with 15+ years in the industry, would you have any advice for a beginner, how to start, what certificates to carry, any advice really. This is an open question for anyone who is in the Spray Foam Industry. Thank you all in advance.
@SprayJones
@SprayJones 3 жыл бұрын
Go work for someone for 2 -3 years first. Otherwise stay out of the business.
@201francois
@201francois 3 жыл бұрын
@@SprayJones so who did it first? You realize there's gotta be someone who learned without working for someone right? I really like your videos but everytime this question comes up you answer the same thing which I get why but disagree. People can learn, are they going to make mistakes? Yes of course, just like you did I'm sure. I think there is a way to get into the business gradually without working for someone else firdt
@SprayJones
@SprayJones 3 жыл бұрын
@@201francois When CUFCA started in Canada in 1985 they certified the already existing SPF installation companies that wanted to be the first certified accounts. Then the only way to get into the SPF certified business was to be apprenticed with 2000 hours of verified spray time before you could write your tests bu one of them. No avenue existed for cold start ups. In 2005 the industry deregulated in Canada because of requests for growth, and a flood of installers hit the market just as you suggested. With it, a flood of BS problems have skyrocketed. Hence this channel is now out to get back to the knowledge and teaching aspect that has been lost. The old methods had merits and I do not endorse the fumble around ways. Do you apply this logic to flying a plane? Being an electrician? Some things you just don't want to learn the hard way.
@201francois
@201francois 3 жыл бұрын
@@SprayJones depends on the industry but since I know aviation I'll talk on that. The answer is yes. You take a course then you have your license and you fly. Sure you don't fly the 747 right away unless it's your own but you can still fly as a commercial pilot as soon as the courses are done. Same thing for a lawyer, an optometrist, a mechanic, so on so forth. Could the industry go back to better training? Probably. But one guy can certainly learn and grow as it goes. As I said, I know where you are coming from and I know you are mad because instead to just sell a product you have to deconstruct the myths then sell but I just sincerely believe a smart person can learn anything with the right approach. Yours is just different than mine.
@SprayJones
@SprayJones 3 жыл бұрын
@@201francois I do not deny that a smart person can, and they have. We learn ongoing, of course we do. It takes more than book smarts to be great at this line of work. I have been around very stupid engineers that could not figure out the envelope, but we could. However, the percentages out there suggest that we cannot structure it in a cold start method to protect everyone involved. Plus most people are romantic about spraying foam but find out they hate it. So why not apprentice first before investing. I keep educating the masses so that we can work. I have had more issues created for us by newbies versus any other factor other than financing or weather. So yes I am biased. I believe in apprenticeships and mandatory accredited training and inspections.
@tracymoo5865
@tracymoo5865 4 жыл бұрын
Do I need to spray foam on the out side of the gable wall and between my neighbor joint wall?Do I need no left the gable wall for the foam to breathe,Or to seal the gable wall to max the performance of the insulation?
@SprayJones
@SprayJones 4 жыл бұрын
Sorry I have too little info about your job to advise.
@tcaz10
@tcaz10 4 жыл бұрын
If you are in a condo and your gable is acting as the party wall, then yes you would seal it.
@carlfrase8097
@carlfrase8097 4 жыл бұрын
Foam doesn’t need to breathe.... you want to spray your gables, to isolate yourself from the other “building” giving you everything you pay for
@EdwardTilley
@EdwardTilley 3 жыл бұрын
Great videos...
@SprayJones
@SprayJones 3 жыл бұрын
Glad you like them!
@randyschock7374
@randyschock7374 3 жыл бұрын
Will there be condensation with a tin roof?
@77Avadon77
@77Avadon77 3 жыл бұрын
No, not at all
@lehaim18
@lehaim18 4 жыл бұрын
What’s the name of the product that you’re using, do you know if it’s legal for California ?
@SprayJones
@SprayJones 4 жыл бұрын
Walltite. It is Canadian made. Talk with BASF in your area, they are a huge company I am sure they have something for you.
@RBBBBBBBBB533
@RBBBBBBBBB533 3 жыл бұрын
Aren't you supposed to sprayfoam the outside of the walls in a basement as opposed to on the inside?
@SprayJones
@SprayJones 3 жыл бұрын
No.
@77Avadon77
@77Avadon77 3 жыл бұрын
I agree wholeheartedly putting fiberglass down in the crawl space makes no sense
@SprayJones
@SprayJones 3 жыл бұрын
Thanks
@semita6254
@semita6254 6 ай бұрын
Ok 👍 but you didn’t explain that the stinky odor and mole problem
@bryantwhitis1268
@bryantwhitis1268 4 жыл бұрын
Hello there, your business only serves the Canadian providence, I'm in the lower 48 I would not have a second guess in contracting your company for the project.
@SprayJones
@SprayJones 4 жыл бұрын
Well Thank You for that. The idea of the channel is to educate and showcase what we can do.
@randyschock7374
@randyschock7374 3 жыл бұрын
Why dont people spray there ducting, wouldn't it help with heat/AC loss?
@SprayJones
@SprayJones 3 жыл бұрын
We do, go watch that video. Better yet subscribe watch my videos and click on some ads.
@PeeWeeHenson
@PeeWeeHenson 2 жыл бұрын
DOES THE SPRAY FOAM IN THE UNDERSIDE OF THE ROOF ADD ANY STRUCTURAL INTEGRITY? I'M LOOKING AT SHED TO HOME PROJECT AND THE SHED DOESN'T USE RAFTERS. THANKS FOR THE HELP
@SprayJones
@SprayJones 2 жыл бұрын
Yes of course it adds support. I have a whole video on the structural benefits of SPF.
@randyschock7374
@randyschock7374 3 жыл бұрын
If your have asphalt shingles it can break havoc on them, I've seen it first hand.
@SprayJones
@SprayJones 3 жыл бұрын
Go watch my video on shingle life and SPF.
@mresistenciaviva
@mresistenciaviva 3 жыл бұрын
Spraying the basement walls will prevent bowing walls to stop?
@SprayJones
@SprayJones 3 жыл бұрын
No.
@mresistenciaviva
@mresistenciaviva 3 жыл бұрын
@@SprayJones Thank Mr. Jones, do you have a reference in the state of New Jersey?
@SprayJones
@SprayJones 3 жыл бұрын
@@mresistenciaviva Sorry I do not. I get asked this a lot, all over the USA.
@flick22601
@flick22601 3 жыл бұрын
I understand that foaming under a roof deck with shingles will cause them to fail in a relatively short time frame. Several videos on here dealing with this problem and virtually all manufacturers will not guarantee their shingles when installed on such roofs. What's the deal?
@SprayJones
@SprayJones 3 жыл бұрын
Go watch our video "spray foam and shingle life, just the facts"
@flick22601
@flick22601 3 жыл бұрын
@@SprayJones - Very good video. I watched it entirely. I still question whether it should be used because there are other, equally well researched and presented videos showing just the opposite. Dang, even construction techniques seem to be becoming polar opposites.
@SprayJones
@SprayJones 3 жыл бұрын
@@flick22601 Then do what you want. I will not deal with someone who is confused.
@flick22601
@flick22601 3 жыл бұрын
@@SprayJones - No need to get snippy. It's just that nobody really seems to know and people on both sides have evidence to back their claims. I'm not saying either is correct and it's not me that is confused if there are opposing points of view or if you think I'm confused, then you haven't listened to the people with the opposing viewpoint.
@christopher6161
@christopher6161 3 жыл бұрын
Why not 3.5" in walls ?
@SprayJones
@SprayJones 3 жыл бұрын
Fine, or 4. Just open your wallet
@nat10nic
@nat10nic 3 жыл бұрын
Could someone tell me what is the cost of this product .
@SprayJones
@SprayJones 3 жыл бұрын
Too may variables. What does a new car cost?
@sapulpaorganics5402
@sapulpaorganics5402 3 жыл бұрын
@@SprayJones OK, so what is the average cost per SF for 2" of foam in a non-vented ceiling???
@SprayJones
@SprayJones 3 жыл бұрын
@@sapulpaorganics5402 You think I am rude for not answering. There are variables that change it. Slope, travel, time of the year, I have a buyers guide to pricing video coming out and it may shed some light on what it takes to arrive at a price.
@Fedgery007
@Fedgery007 Жыл бұрын
You should be sealing penetrations before spray foaming. You shouldn’t be relying on spray foam to seal penetrations. Seal the penetrations correctly first then use spray foam for insulation.
@SprayJones
@SprayJones Жыл бұрын
Can we use can-foam Jeff?
@joey-mp3qc
@joey-mp3qc 3 жыл бұрын
I live in Atlanta. I've been thinking of 2 spray foam projects. Which should I do first? Spray foam crawl space foundation wall, with foam board rim joist (for termite inspection). Or should I spray foam my roof? Which would yield the biggest energy benefit? I've heard that spray adds strength to a structure. Our home was built in 1921 and does not have a subfloor. Joist are spaced 20" - 30" apart. Our hardwood cherry floor is all 8' lengths. Would spray foam from underneath stiffen the floor. Or would it expand and come through the cracks into the living space? Thanks
@SprayJones
@SprayJones 3 жыл бұрын
Roof.
@saidtheblueknight
@saidtheblueknight 3 жыл бұрын
So pretty much everywhere. The title of this should be "spray foam your entire house".
@SprayJones
@SprayJones 3 жыл бұрын
Now you are catching on!
@infiniteadam7352
@infiniteadam7352 3 жыл бұрын
Except behind those studs that should have had a space behind them.
@SprayJones
@SprayJones 3 жыл бұрын
Sub to the channel if you are not. I have a video coming out of thermal image scans so you can see the SPF and the studs.
@BlockchainToTheFace
@BlockchainToTheFace 2 жыл бұрын
Where’s the roof leaking? Hmmm no idea
@SprayJones
@SprayJones 2 жыл бұрын
Hmm.... need water coming inside a structure to tell if there is a problem?? Hmm I wonder how else one can do an inspection??
@BlockchainToTheFace
@BlockchainToTheFace 2 жыл бұрын
@@SprayJones I guess you could pull ALL the shingles off every time it rains to see if it’s leaking on to the boards or sheeting under the shingles. With spray foam you’d have NO IDEA it was leaking
@eliinthewolverinestate6729
@eliinthewolverinestate6729 2 жыл бұрын
You don't need roof ventilation here in Michigan if you have metal or clay roof. Asphalt shingles DO NEED VENTILATION. You do need ventilation in your spray foamed house then where does the moisture go??????????????? That's why code requires ventilation. What he says is misleading. Take a shower where's the moisture go? Boil some water where's the moisture go? You may not need roof ventilation but then you need mechanical ventilation by code. If your vent fans can't pull fresh air how does it vent? Spray foam is great but it can be miss used. Spay foam against something that condenses will never dry out. Just trying to set things straight. I don't want to have to rip out another spray foamed basement. Hows a basement suppose to dry behind spray foam? It don't. What happens in basement is masonry condenses right at spray foam. It's sealed from coming in. But it's sealed from leaving too. 22000$ to rip out spray foamed basement and try to stop the mold and mildew. You don't need ventilation just never shower or breath in your house so moisture won't be a problem venting it out.
@SprayJones
@SprayJones 2 жыл бұрын
Watch the 4 part series on non-vented roofs.... or not I don't care. We deal with people that get the physics of what the foam can do. You are not listening...
@onedge70moparsuperbee23
@onedge70moparsuperbee23 3 жыл бұрын
👍👍
@kirksway1
@kirksway1 3 жыл бұрын
I hate difficult penetrations !
@murphmurph2124
@murphmurph2124 Жыл бұрын
Mice and some bugs will eat right through foam
@edgargonzalez6044
@edgargonzalez6044 4 жыл бұрын
A lot of closed cell... what’s the yield per set?
@SprayJones
@SprayJones 4 жыл бұрын
It's the best and what started the industry. We get 5000 board feet
@edgargonzalez6044
@edgargonzalez6044 4 жыл бұрын
Spray Jones - 5000 man, that’s good. I get about 3500 a set.., what’s the R-value per inch?
@edgargonzalez6044
@edgargonzalez6044 4 жыл бұрын
Is that closed cell 2.0? Or the 1.6, 1.7 if I can ask...
@SprayJones
@SprayJones 4 жыл бұрын
@@edgargonzalez6044 They rate it on r for thickness. 19 for 3 inches. BASF is the best on the market.
@SprayJones
@SprayJones 4 жыл бұрын
@@edgargonzalez6044 1.85 lbs is the design density. When everything is going your way...
@johnhoffner1609
@johnhoffner1609 Жыл бұрын
When you minimize the holes in your home you maximize the amount of air through the remaining holes you're the remaining holes under negative pressure duh
@acedogg692005
@acedogg692005 3 жыл бұрын
"That I need"? Probably not & Only if your doing it for free! I can't imagine what this costs...
@the_superb_owl
@the_superb_owl 2 жыл бұрын
"You wanna have iPad Android technology in the walls" - Pardon? Does that pitch actually work on anyone?
@SprayJones
@SprayJones 2 жыл бұрын
Seeing how Billy Mayes used it all the time I would say yes.
@johnhoffner1609
@johnhoffner1609 Жыл бұрын
If you could possibly eliminate every hole on a house you are in one dangerous a** house that is a mechanical home relying totally on your ventilation system no system nothing to do with insulation except except negative A house with no leakage is A Dangerou's home fires burn differently in these homes
@SprayJones
@SprayJones Жыл бұрын
John, get educated before you type. Do you fly in an airplane? How much air leakage is there at 37,000 feet? How does a pool room at a hotel deal with envelope in Alaska?
@rockysautosales1223
@rockysautosales1223 4 жыл бұрын
By the way the house had 3 floors, 2 full floors and a nice full attic
@shednut2666
@shednut2666 3 жыл бұрын
Spray foam voids warranty on shingles
@SprayJones
@SprayJones 3 жыл бұрын
Go watch the video we have on shingle life and SPF please.
Does Spray Foam Insulation Need A Vapor Barrier?
22:38
Spray Jones
Рет қаралды 73 М.
SCHOOLBOY. Последняя часть🤓
00:15
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 10 МЛН
Closed Cell Foam + Rockwool- How To Flash & Batt
10:40
Matt Risinger
Рет қаралды 249 М.
5 Spray Foam Insulation Failures and Why!
13:23
Spray Jones
Рет қаралды 340 М.
Water Testing Spray Foam Insulation
13:58
Matt Risinger
Рет қаралды 713 М.
Everything You Need to Know About Spray Foam
12:08
Home RenoVision DIY
Рет қаралды 1,2 МЛН
Testing The Burn Ability Of Insulation In Wall
19:45
post 10
Рет қаралды 2,6 МЛН
SPRAY FOAM: Open Cell vs Closed Cell
9:25
Bailey Line Road
Рет қаралды 569 М.