Thank you! would love to see a photo of your patio roof.

Thank you! Glad you liked it.

Thank you for watching. Stay tuned for our current build...a 30 x 60 log barn with a peaked roof for RV and equipment storage.

Thank you for watching. In addition to the lag screws, we usually notch as well which ads extra strength and support to the structure. Good luck with your build.

That is awesome! Thank you for watching! Stay tuned for our next big build coming up in a few months. A massive round arbour with traditional and chain saw carvings.

More to come! Currently working on 150 ft diameter log arbour with chain saw & aboriginal carvings. Partial video to be posted within the month.

@@sliverssawdust5369 great can't wait

@@theodorebowers9737 Hi there. Following up to let you know we now have Parts 1-4 published of our next build; Log pole-barn. Check it out.

Thanks for watching!

Thank you!

That's awesome. Thank you for watching!

Thanks for watching!

That’s funny!

Thanks for subscribing and liking. Glad you like the video. Please check out our channel for our current build. Same log pole style in a 60x30 barn with home-made trusses - Parts 1, 2 & 3...Part 4 pending. Have a great day!

Good luck with your build!

Thank you! If you haven't already, please subscribe. More great builds to come in the next few months.

@@sliverssawdust5369 New sub!

Thanks! Will get you that information this weekend. Stay tuned for our next big build - a giant arbour with chain saw and indigenous carving.

Would also like to see the specs, like spacing between posts, etc. Also how the cross members are attached to the top of the posts.

Glad you enjoyed it! Keep watching - we have a new big build coming in the next month or so.

Thank you for watching. Stay tuned for our next build.

Thanks again for watching. This build was done with fir. You can use several different species of trees, depending on where you live. Most important, long & straight.

It's something to consider. Thanks for the suggestion. Thanks for watching !!

It's fir logs. They will do what they do. They shouldn't twist to bad. Follow along and will be putting up another barn video.

The weight is on the straight up and down posts.

The braces are just to prevent the shed from shifting side to side

thanks for watching!

Depending on the species of trees but at least another 25 to 30 years yours make sure you put gravel in the bottom of the hole so it doesn't retain water

Sorry for the delayed reply. Thanks for responding Jim. You are exactly right; the gravel in the hole and burning the log past ground level is the trick to get the longest life out of the log. Have a great day!

Could do some kind of bracket there as well. Knee braces arent doing much for load, but it seems more for racking?? Im asking because i have limited building and no real technical engineering know how ...

Also in another comment he acknowledged that they usually notch the 45s

No. Based burned, so shouldn't show any signs of rot for 20+ years. Thank you for watching! Please subscribe for notification of future videos.

Thank you for watching. Stay tuned for the next build.

Used Grk's , and hurricane shaping .

The barn is being used for cattle. May consider half enclosure on three sides, leaving front open.

6

I say they would last 30 to 40 year's

I use fir, but a person can use whatever they have. Thanks for watching !!!

Thanks for watching. 14 ft at the front under beam and 8ft at the back.

Great job! So, the slope was 14 feet on the front, 14 feet in the middle, and 8 feet on the back?

Thank you. We will have an arbour build coming in the next month and I will see what I can do about the music.

you dont have volume control. thats a little rude dont you think.

I'm learning:) working on downloading better music. Stay tuned for the next big build.

Thank you for watching. We strive for safety as you can see throughout the majority of the video. You are right, he should have had his helmet on when trimming the brace.

@@sliverssawdust5369 not sure how much a helmet helps with a kickback (and i wouldnt try that out, short swords are dangerous, especially if you dont have the lefthand on the machine, which is the one for the safety mechanic, and to counter force of potencional kickback. just saying ;) even with both hands on the saw, there can always be a rock or metall inside a piece of wood... i also sometimes use a chainsaw in flip flops, am not critizising you at all, i just see a very dangerous situation here, and try to make you aware of it, in case you arent. (which looks like it to me:) ) greetings from an german carpenter.

No one needs a helmet. I choose to wear one because I value my brain. This guy runs a lot of equipment and it doesn’t look like his first rodeo. I’m sure he’s well informed of the risks, and has made his informed choice.

Sorry about the music; just learning. Follow along with our newer videos and give us a comment if you think we are improving.

@@sliverssawdust5369 Use the real sound. What is better than the sound of a chainsaw cutting wood?!

Thank you! working on some better sound options. Stay tuned for our next big build - an arbour with chain saw and traditional carvings. Should be out within the month.

Thanks for the tip

thanks for watching. Just learning and hope our videos will get better for you.