6T40 Internal Part 1

No video

6T40 Internal Part 1 - 3/1/16

Рет қаралды 35,070

ATRA -Automatic Transmission Rebuilders Association

Күн бұрын

Пікірлер: 29

@user-by9hb3ds7x Жыл бұрын

Thank you very much for this video 👍👍

@jerrymartinez2766 7 ай бұрын

Great video

@atra-automatictransmission1300 7 ай бұрын

Thanks! Make sure to like and subscribe; for more info, visit members.atra.com/

@LegendLength 9 ай бұрын

Can i turn the car off before checking the fluid plug? It feels unsafe to have it on jackstands in park and running. I do have a scan tool that shows fluid temperature.

@dhonnoll78 3 жыл бұрын

Thanks this is VERY informative. I have a 2014 Buick Verano 2.0 Turbo. When in D 1st gear seems to pop out at 3mph until 9mph (provided I have enough momentum or downhill run) when the trans seems to go in 2nd. If I put the trans in M it shifts fine all day. In fact I can take of in M1 bump it over to D at 9mph and it works fine until it needs 1st@3-8mph. Reverse works fine even up to 20mph. I suspect this I'd the low/rev clutch disengaging and 1st is either done, or burned up. I have changed the TECHM and the valve body same result. When in M does the low/rev clutch stay engaged the entire time in 1st and always in Rev?

@SyntheticVisionsAutomotive 11 ай бұрын

2016 Chevy Trax awd 6t40. P0796 stuck in 3rd , but drives now. Replaced solenoids and still same code. Is this the valve body? Before replacing it would try to go to 4th and just hang and couldn't really go over 25 mph. Fluid had no metal and new fluid in it. Thank you for the video!

@RC_BASSBOY 3 ай бұрын

Can a 6T40 gen 2 transmission be programed where a 6T40 gen 1 was originally ?

@atra-automatictransmission1300 3 ай бұрын

Unfortunately, no, the GEN 1 and GEN 2 VB's and strategies are different.

@yvesbrodeur4053 4 ай бұрын

Hi, what options exist to replace a 6t40 on a 1.4L in a chevy sonic with at least a minimum of 400 wheel horse power ?

@atra-automatictransmission1300 4 ай бұрын

You don't really have options. Sorry, man. That unit is the only unit they made for that engine

@yvesbrodeur4053 4 ай бұрын

Thanks

@officer2160 4 жыл бұрын

supercheap NZ recommended Pentrite LV for this transmission, once added the transmission worked for around 2 weeks then stopped. GM states that it is a internal fault. with no fluid flowing out of the cooler pipe which in idle. now nothing no gears both drive or reverse. no weird sounds or knocks.. thoughts?

@ntsakomabasa4185 Жыл бұрын

Tankx this is very informative... Now may I please ask. Where do I get the parts for this....?

@atra-automatictransmission1300 11 ай бұрын

www.wittrans.com/

@draco_tv_letsride 10 ай бұрын

i removed my valve body and there is two a little short screw, can you advise where it was located when tightening the and installing the valve body again?

@P1ayCrackThe5ky 2 ай бұрын

The two slightly shorter screws go into the left side (when viewing the vehicle from the front) of the valve body.

@draco_tv_letsride 2 ай бұрын

@@P1ayCrackThe5ky thank you for the info, i finish repairing my TCM and valve body, i also put davies craig transmission oil cooler with automatic fan with 180°f- 165°f thermo switching, now its more cooler.

@SwiftySwift-cp8xd 4 ай бұрын

What happens it atf fluid control valve is bad

@atra-automatictransmission1300 4 ай бұрын

low fluid pressure rise, slipping shifts

@1111comment 3 жыл бұрын

Can the MLP be changed easily from the front?

@janpalmer3025 Жыл бұрын

I fix cars, but I am working on a 6T40 in neutral, engine off, I roll the chevy forward just 12 inches, I can hear a clicking sound, it's not the inner cv joint, I have just replaced the new cv joints, could you please let me know, thanks for the video, awesome detail.

@larryreno8293 11 ай бұрын

It’s normal, it’s the one way clutch, aka diode, or sprag.

@janpalmer3025 11 ай бұрын

awesome