7.3 powerstroke Banjo Bolts

Рет қаралды 23,887

Күн бұрын

Talking about the banjo bolts check out powerstroke help link below for a little better install
Don't forget to Subscribe!!
www.riffraffdiesel.com/riffraf...
• 7.3 HIGH PERFORMANCE 2... - video for little better help
www.Xpressdieselperformance.com

Пікірлер: 32

@Sochack 7 жыл бұрын

Thank you for the information!

@2000Diesel250 7 жыл бұрын

It reduces restrictions on the fuel system will help injector to not starve for fuel.

@bradleymetler4918 4 жыл бұрын

3 year old video but hey - just getting around to this on my truck. Passenger side stock Banjo bolt stripped. Drivers side easy to remove. Crucial to have both bolts be identical even with CVD and FRx modifications? Or, keep both bolts stock with the FRx and CVD?

@alanlamb221 4 жыл бұрын

An authentic diesel bro!

@younofunny2old 7 жыл бұрын

You do not have to pull the wheel well. You can reach from the top on the passenger side and with a mirror or go from feel you can do it from the top. The drivers side has four bolts that are 13mm and push it forward to get to that one.

@samanthasims6736 6 жыл бұрын

Hey! What’s up Devon time to get back in the game And start making some More 7.3 videos! I got a 96 7.3 gonna be swapping to e fuel found a whole write up on it and I only spent 250$ for everything

@jahazielavitia2371 7 жыл бұрын

did you feel any difference Devon?? what's that filter next to the battery for?

@JacksonKV2FTW 7 жыл бұрын

jahaziel avitia it's a coolant filter

@DevonXpress 7 жыл бұрын

+jahaziel avitia maybe a little smoother, really allows more fuel when you call for it. Doing my CVD fittings now to remove restrictions

@samanthasims6736 7 жыл бұрын

How is this fuel Upgrade on the 96 7.3? Since it's a mechanical fuel pump?

@DevonXpress 7 жыл бұрын

+Drew Vierra I believe it still will work the same, I haven't done this to my older trucks but maybe someone else will answer this

@carlosgarza1763 6 жыл бұрын

Have a stock 99 f350 7.3 I have Ts chip Coolant filtration system AFE intake Looking to do another mod Should I go with remove fuel stem string , and Banjo bolts , fuel crossover & hpx ? What do you think ??

@carlosgarza1763 6 жыл бұрын

@DevonXpress 6 жыл бұрын

I've done all of those, I just put the fuel crossover. I haven't really done any testing on it yet. The restrictions in the fuel like banjo bolts need to be addressed first.

@jakethornbury4412 7 жыл бұрын

You didn't really say what this upgrade does? Can you explain?

@DevonXpress 7 жыл бұрын

+Jake Thornbury helps increase volume of fuel you can deliver while in the throttle

@samanthasims6736 7 жыл бұрын

Try to post some More videos Devon

@DevonXpress 7 жыл бұрын

+Drew Vierra have something in mind?

@Chris123NT 7 жыл бұрын

There's only 2 banjo bolts on the 7.3, one on the front of the drivers side head, one on the back of the passenger side head, that's it.

@DevonXpress 7 жыл бұрын

+Chris123NT I wasn't real sure if there was others, thanks clarifying

@Chris123NT 7 жыл бұрын

www.riffraffdiesel.com/high-flow-fuel-cvd-fitting-set/ That's another mod you might want to consider, That's actually the first point of restriction, banjo bolts are the second. Factory fittings have restrictive check valves and these are wide open. I did both on my truck at the same time (banjo bolts and CVD Fittings) and went from running lean at full throttle with dropping fuel pressure to plenty of fuel and no drop in pressure.

@DevonXpress 7 жыл бұрын

+Chris123NT I just got them in today, didn't realize it's only one per head

@carlospsdz155 6 жыл бұрын

there are four banjo bolts two on each head,

@carlospsdz155 5 жыл бұрын

There are four two on each head.