7 Highest Revving US Production Engines
Рет қаралды 386,266
Күн бұрынFollow me on my vlogging channel 'VisioRacer Vlogs'. Click here: bit.ly/VisioRacerVlogsYT
- Follow me on -
Instagram: / visioracer
Drivetribe: bit.ly/DT_VisioRacer
Facebook: / visioracer
Google+: plus.google.com/+VisioRacer
- Music -
'lifecouldbeadream' by future james
/ future-james-lifecould...
- Disclaimer -
This video is fair use under U.S. copyright law because it is transformative in nature, uses no more of the original than necessary and has no negative effect on the market for the original work.
- Credits -
“GM Quad 4 engine with beltdrive conversion” by webabox
• GM Quad 4 engine with ...
“1993 W41 Quad 4 Engine running” by Steven Seale
• 1993 W41 Quad 4 Engine...
“Quad 442” by MODeration nXS
• Quad 442
“'91 Cutlass Calais International (2.3 Quad 4 High Output 5 Speed)” by Mix7Master7Jay
• '91 Cutlass Calais Int...
“1995 caprice wagon 6 speed with LS7 corvette engine” by v8killers
• 1995 caprice wagon 6 s...
“Corvette ZO6 Ls7 Burnout & Sound HMS Exhaust, Poland” by Paweł Pancarowicz
• Corvette ZO6 Ls7 Burn...
“ls2 vs ls7” by DaFlyinSkwirl
• ls2 vs ls7
“C5 Z06 HPR LS7 Corvette Track Monster at COTA” by Adam Tobolowsky
• C5 Z06 LS7 Corvette Tr...
“1997 Ford Taurus SHO V8 Start Up, Quick Tour, & Rev With Exhaust View - 136K” by Intechdude300
• 1997 Ford Taurus SHO V...
“1996 Sho V8 exhaust sound clip” by ShoGuy games
• 1996 Sho V8 exhaust so...
“97 Taurus SHO acceleration” by SHObruh
• 97 Taurus SHO accelera...
“1996 CHEVY MONTE CARLO 3.4L ENGINE TESTING” by tuzhilkov
• 1996 CHEVY MONTE CARLO...
“1996 GTP 3.4L DOHC V-6 Dyno Run After Engine Rebuild” by XHustonProductionsX
• 1996 GTP 3.4L DOHC V-6...
“0-100 in 5-speed lumina Z-34” by racingjwalter
• 0-100 in 5-speed lumin...
“Getting the flooded S-10 running and loud Z34 lumina” by Logansfarm
• Getting the flooded S-...
“1991 ZR1 LT5 Rebuild” by Manny Dasilva
• Video
“1990 ZR1 Chevrolet Corvette C4 LT5 Full power Acceleration Exhaust Full Power muscle car” by Marco Gastaldo
• 1990 ZR1 Chevrolet Cor...
“1994 corvette ZR-1 LT5 merging onto freeway Acceleration!” by 5abivt
• 1994 corvette ZR-1 LT5...
“Soon to be classic 1994 SHO Ford Taurus” by 2stroketurbo
• Soon to be classic 199...
“1994 Ford Taurus SHO 3.2 Yamaha Engine Sound” by ArabianKnight7771
• 1994 Ford Taurus SHO 3...
“Ford Taurus SHO start up and revs” by Midwest Exotics
• Ford Taurus SHO start ...
“Turn key pallet. 2017 Ford Mustang Shelby GT350 5.2L voodoo engine video” by The Parts Farm
• Turn key pallet. 2017 ...
“2018 Ford Mustang Shelby GT350 R Sound” by RildsRoyce
• 2018 Ford Mustang Shel...
“WTF Shelby GT350 2017 Brutal CRAZY Racing Exhaust Sound Loud!” by Desmo
• Video
“Awesome Ford Mustang Shelby GT350 Dyno Runs!!” by Because RaceKarl
• Awesome Ford Mustang S...
@gregmayled 5 жыл бұрын
I adore the GT350 sound so much. It has everything
@cellphonelightsaber 4 жыл бұрын
All V8s sound furious but this one sounds psychotic near peak HP... It sounds like the last half of all the lyrics in Postmortem.
@ChuckBeefOG 4 жыл бұрын
Numerous cars have lost motors before 10,000 miles. Not turning out to be a great engine.
@damienmcmurray9786 4 жыл бұрын
Chuck Beef gen 2 is far more reliable. The 19+ cars all have them.
@phillyphil1513 4 жыл бұрын
@@damienmcmurray9786 re: "gen 2 is far more reliable." in theory, however time will tell.
@naastyws6718 4 жыл бұрын
Greg Mayled it has everything except reliability and it’s expensive as shit
@BeesonsCars 5 жыл бұрын
The Voodoo is by far one of the best sounding engines on the market imo. Just incredible.
@naastyws6718 4 жыл бұрын
Tyler Beeson u hear that lt5 tho?
@cenanmehmet 3 жыл бұрын
Yep it's like complex Italian and American engineering,it's brutal like an American but angry like an Italian,i loved this sound 😭😭😭😭😭
@million127 2 жыл бұрын
Ls7 sounds better imo
@Ole_CornPop 6 ай бұрын
@@million127hell to that naw
@lowbob1999 5 жыл бұрын
Not a ford guy in the slightest but that voodoo wins by a mile. That’s too cool
@fobbitoperator3620 5 жыл бұрын
Sounds like an F1 race engine!
@mememanfresh 4 жыл бұрын
@@fobbitoperator3620 you must be hearing things
@fobbitoperator3620 4 жыл бұрын
@@mememanfresh Yeah, gaw'damn race car engines!
@randytheracer3664 4 жыл бұрын
Mike Pickle I’m a ford guy all day long but I absolutely love the dodge demon. First production car to do wheelies lol. I’d still prefer to have the streetable 13’ Shelby 1000
@johnmcelroy7042 4 жыл бұрын
The Ford 3.7L V6 (Cyclone) used in Mustangs from 2011-2017, was Rev Limited to 7000 RPM.
@joelgutierrez4485 5 жыл бұрын
I'm a GM guy myself but man that voodoo is insane!
@necromax13 5 жыл бұрын
It's basically Ford attempting to make a Ferrari engine, and it's BADASS
@joelgutierrez4485 5 жыл бұрын
@@necromax13 Yeah, but in my opinion the voodoo is way better than any puny Ferrari V8.
@necromax13 5 жыл бұрын
@@joelgutierrez4485 ... Not really. The Ferrari 458 and successive models have a naaaaaaasty high revving V8 that is actually the engine with the highest specific output in any publicly released mass produced car. Those things are sick.
@joelgutierrez4485 5 жыл бұрын
@@necromax13 They better be! Considering the money charge for those things.
@kevinfortin8240 5 жыл бұрын
@@necromax13 For the amount of cash you pay it's kind of crazy to think someone would buy it over a Coyotes or Voodoos
@JsGarage 5 жыл бұрын
The Voodoo makes the hairs on my body stand up. Want a cool V8. Also a big LS7 fan.
@moparguy0839 5 жыл бұрын
What about the 1963 Chrysler Turbine Car at 44,000 RPM?
@lolheads579r 4 жыл бұрын
not a production car
@CheekiScrubb 4 жыл бұрын
@@jimmyhoffmann4950 speaking from experience ?
@Bartonovich52 4 жыл бұрын
@ Richard Siahaan Yeah him and millions of others.
@Creeperboy099 4 жыл бұрын
LMAO true
@oscarwalton1188 4 жыл бұрын
True lol but it never made it to mass production unfortunately
@hoost3056 5 жыл бұрын
The original LT5 was Lotus designed and Mercruiser built. Bore spacing was same as the small block pushrod V8 but everything else was unique to the engine. It really was an incredible engine. Lingenfelter Racing built some custom packages for this engine that would make the hair stand up on the back of your neck as it was heading towards the red line.
@5abivt 5 жыл бұрын
Deez Nuts 39 lbs dry over a l98. With a composite intake plenum like today’s motors it could save a good bit of weight.
@SleeperCalais 5 жыл бұрын
Thanks for featuring my Quad 442! She was my first car. :)
@alankelter9416 4 жыл бұрын
Not a chance
@avrahambrea1919 5 жыл бұрын
The sound of the voodoo tho😍
@luc0650 4 жыл бұрын
Sound like trash
@noob_driveregy7744 3 жыл бұрын
@@luc0650 like ur mother :)
@gabrielb.3246 3 жыл бұрын
@@luc0650 Like your mother😂
@AIC99 5 жыл бұрын
As usual Ford FTW
@Jonathan-3773 5 жыл бұрын
Is the next video "Honda's lowest revving engines" :)
@crustycorollas 5 жыл бұрын
Their new VTEC 3 cylinder turbo in the EUDM Civic redlines at 5500RPM
@lrecollet 5 жыл бұрын
😂😂😂😂😂
@antonman1234 5 жыл бұрын
The lowest revving honda engine can rev up to 9999999999999orpm
@louiscrespo1280 4 жыл бұрын
@@crustycorollas their non vtec d15b8 redlines at 5300rpm
@Bartonovich52 4 жыл бұрын
My 1.5T redlines at 6500 But the *_TORQUE!!_* It’s fun passing cars uphill locked in sixth gear.
@falconpowerful2362 5 жыл бұрын
That Voodoo!!! Flat-plane awesomeness!
@upsidedowndog1256 5 жыл бұрын
My old Ford 289 with minor mods pulls hard to 9500rpm. A running Quad 4? Glad they caught that on video, I haven't seen one run in over 20 years!
@BIGBLOCK5022006 5 жыл бұрын
The 351 Windsor/Cleveland can pull hard too if it's built right.
@upsidedowndog1256 5 жыл бұрын
@@BIGBLOCK5022006 Windsor for sure can be built right, its just a tall deck 289. Clevelands are great running engines too, but are prone to cracking and have oiling issues at high rpms.
@jondoe6618 5 жыл бұрын
Beat me to it.
@tskraj3190 5 жыл бұрын
Ford has always relied on higher RPMs over compression. That is the reason why Fords have worse mpg but it does give them an advantage in racing however it is causes more wear and tear on the cam and crank. This is why we see Ford using multiple cams on their engines now to reduce damage to the engine.
@upsidedowndog1256 5 жыл бұрын
@@tskraj3190 I love the sound of the higher rpm levels. My 289 is 10.5:1 and really pops!
@the8jrfan 5 жыл бұрын
5:52 *Driver Door Ajar* 🤣
@traxxasrcfun 5 жыл бұрын
Ford 5.2 is king, listen to her scream!!😍😍
@kxp.1496 3 жыл бұрын
@@luc0650 takes after you sissy
@toasterbathboi6298 5 жыл бұрын
Haven’t watched yet, but already thumbs up. I already know this’ll be good.
@dean8067 5 жыл бұрын
The new 2018 models of the Mustang GT can also rev up to 7500k Rpm thanks to the updated Coyote
@carlosdeleon9593 3 жыл бұрын
My 2015 GT revs to 8.2k rpm now lol
@CarlosRodriguez-ok8ym 3 жыл бұрын
@@carlosdeleon9593 how? If you don’t mind answering
@carlosdeleon9593 3 жыл бұрын
@@CarlosRodriguez-ok8ym Bought a 2018 manifold. Had it ported. Got all the other bolt on parts, e85 and got a tune for it. Makes more power up top now
@Yeetilini 5 жыл бұрын
You missed the GM DZ302 offered in the 69 Z28. It was was a 5.0 pushrod capable of regularly pushing to 9k
@lesbratton5411 4 жыл бұрын
As long as you had a scattershield.
@faisal3398 4 жыл бұрын
Pushrods can rev to 9k but you have to put in a race valvetrain (expensive lightweight strong stuff) to eliminate valve float and things breaking, also adding a dry sump help out a lot, race valvetrain usually can't fit in production small blocks like big pushrods for example (and manufacturers won't put in solid lifters), and dry sump is expensive and rarely shows up in production cars.
@alankelter9416 4 жыл бұрын
Didn't miss. Gm302 missed production. So ya full of shit
@gothicpagan.666 4 жыл бұрын
William McCord But not in the state it would of been delivered to the public
@71sc502 4 жыл бұрын
@@alankelter9416 no it dodnt moron
@Ripplin 5 жыл бұрын
I love your channel. Always new ideas and fresh content, unlike other channels I won't name that feature the same tired hyperbole in their titles and the same re-used clips over and over and over again.
@jaakko222 5 жыл бұрын
Damn the voodoo is awesome
@mrkiplingreallywasanexceed8311 Жыл бұрын
So, so interesting! Am slowly catching up on the back catalogue!😆❤
@04mach1speed 5 жыл бұрын
Awesome video Visio :-)
@JordieG8 4 жыл бұрын
The Voodoo sounds amazing.
@pkmobius 5 жыл бұрын
Dlho som hľadal takéto video :D Diky
@EyesackWorley 5 жыл бұрын
Good video mate
@RPDSfinest 5 жыл бұрын
@6:47 honestly amazed he didn't collide with that car turning.
@heavenswarrior26 5 жыл бұрын
I had a ford focus St with the 2.0 Liter rated at 252 HP and had no limiter from the factory, the tach read 8k and would easily go past.
@matthewkloep8391 3 жыл бұрын
That’s how you send a piston to space
@kennethelliott5985 Жыл бұрын
it also had no power past 5500rpm with out upgrades
@Alex462047 5 жыл бұрын
That last one was epic!
@BIGBLOCK5022006 5 жыл бұрын
Visio, the Taurus SHO V8 was designed by Yamaha and built at the Ford Windsor Ontario engine plant. The original Taurus SHO V6 from the late 80's to mid 90's was also designed by Yamaha.
@fidelcatsro6948 5 жыл бұрын
is this model similar to the crown victoria?
@BIGBLOCK5022006 5 жыл бұрын
@@fidelcatsro6948 No. The Taurus SHO engine is a different ball game compared to the Ford Modular engine.
@GoldenGrenadier 5 жыл бұрын
Isn't that also the same V8 used in Volvo's XC90 and S80s? If not it's a hell of a coincidence since they're both 60° V8s developed by Yamaha.
@orficaldari3524 5 жыл бұрын
The SHO V8 was designed by Ford and based on the Ford Duratec. Yamaha built it though
@orficaldari3524 5 жыл бұрын
Brycen Peaden Yeah the V6 is definitely Yamaha I think the V8 was more Fords work and design and Yamahas construction
@LastWish90 5 жыл бұрын
Meanwhile people in the S2000s A mere 7000 rpm, my vtec just kicked in, yo!
@hondafknciviv3818 5 жыл бұрын
It's actually 6000 but I get the joke
@LastWish90 5 жыл бұрын
@@hondafknciviv3818 Ik, I just looked it up as well but there wasn't any engine in the video that reved just to 6000 ):
@santiagohernandez8799 5 жыл бұрын
The don't make 500+ hp though :(
@luisrosas4385 5 жыл бұрын
Honda people...lmao.
@hondafknciviv3818 5 жыл бұрын
@@santiagohernandez8799 if only naturally aspirated 2 litres had more than 200hp/litre am I right lads?
@antonman1234 5 жыл бұрын
LOVE THE VOODOOOOOO
@Yomamafool 3 жыл бұрын
Not a mustang fan but those stangs gave me cold chills 😍 nothing beats the sound of American muscle/pony cars
@mjrice9136 5 жыл бұрын
Ford Voodoo: 526HP= Around 105HP Per Liter
@gountzas 5 жыл бұрын
The specific output is 101.2hp/lt.
@mjrice9136 5 жыл бұрын
George Quattrovalvole Thanks!!
@jdrok5026 5 жыл бұрын
And it's still a useless metric. Peak power numbers don't tell the full story.
@luc0650 4 жыл бұрын
Hellcat redeye gives about 129 hp per liter
@marcharris2734 4 жыл бұрын
@@luc0650 yep. But supercharged. 5.2 is n.a Pretty impressive
@ooohhenrybmblm 2 жыл бұрын
That Taurus sounded badass.
@mike-ph3fk 5 жыл бұрын
Not sure why, but I really liked the way Visio pronounces voodoo. Sounds like something to be feared.
@kevinfortin8240 5 жыл бұрын
It is rightfully so to be feared too.
@Lrules364 4 жыл бұрын
Nice video man. Lots of love for the voodoo, but not much for the Quad 4. The Quad 4, and later Twin Cam, motors, are by far the most powerful N/A 4 cylinder motors GM ever put out. They put the currenct ecotec to shame in both performance and reliability. And if Oldsmobile was allowed to bypass the bean counters of the era, I have no doubt that the Quad 4 would have been pushing 210hp stock n/a, and at least 275hp with a turbo and a few lbs of boost. And its still a motor that holds many records that not even the foreign brands can beat today, including the worlds fastest flying mile in a 4 cylinder powered car.
@thecrispyhias1050 5 жыл бұрын
Nice video!
@afrog2666 4 жыл бұрын
USA: "we done made an 8.000rpm moter!" Japan: "hold my sake"
@phil955 3 жыл бұрын
Ford SHO: Let the SHOw begin! Yeah!
@itsbradmin3423 4 жыл бұрын
I really like the sound the 60 degree V-8 in that Taurus makes. Sounds like a European car
@naughtyponyracing 4 жыл бұрын
Love You Visio. So much engine shit I never Heard of
@dominicdo 5 жыл бұрын
the corvette was fun to drive i remember those days!
@gassyirishman2859 5 жыл бұрын
I love that late 90s Taurus SHO, ultimate sleeper
@michaellorah9051 4 жыл бұрын
I own one. Its fuckin loud. All my neighbors know the glory of V8
@fearindestry 2 жыл бұрын
6:38 I'm actually surprised, first time I see a Mustang on full send and not ending in the ditch 😂
@_milo590 5 жыл бұрын
There was the zetec engine known in the focus SVT for reving to 7200 rpm and had a torque curve all the way there.
@BuffMyRadius 5 жыл бұрын
Was it made in the USA though? I thought it was a weird Cosworth modified deal.
@BuffMyRadius 5 жыл бұрын
I went and looked it up, the Zetec E was never produced in the US, just imported here.
@_milo590 5 жыл бұрын
Stuart Marshall engine was made in the USA, cosworth designed the 4-2-1 exhaust manifold and the VCT profile
@Sandy-oy2lr 5 жыл бұрын
From what I've read, the LS7 weighs only 438 lbs, dry, fully dressed. Extremely light for such high output. They tried to re-introduce it for the new Z06, but, new government regulations prevented it from making much extra power. Despite DFI, cam phasing and cylinder deactivation.
@daleostrom3613 5 жыл бұрын
Sandy; The chevy LS7 engines are known for dropping valves, get a good warranty if you are going to buy one.
@Sandy-oy2lr 5 жыл бұрын
@@daleostrom3613 Actually, I've had one for almost 7 years. I've got nearly 70Kmi on it so far. Uses almost zero oil. Factory ordered it. Been doing oil sampling testing through Blackstone Labs. No wearable materials in the oil so far. Even after 10Kmi oil/filter changes. Seems to've been a major issue from 2008-2010 with heads machined during that period by Linimar Machining in Ontario. The guides were too large in I. D. From what I read, the issue was addressed by Feb of '11.
@Sandy-oy2lr 5 жыл бұрын
@Carl Ryan I appreciate your concern. From my research, this issue is mostly with engine heads manufactured from 2008-2010. In Feb of 2011, GM told Linimar Machining to start doing a 100% inspection processed. The defect was valve guides whose interior diameter was too large and non concentric. I've almost 70K miles (including 5 hours of track time) and, so far, alls well. No significant oil consumption. And Blackstone sampling tests show zero wearable metals (including TI) showing up in the oil. In fact, they said my LS7 is wearing less than a 4 cylinder Honda engine doing 3-4Kmi oil/filter changes. One sure sign of looming trouble is high oil consumption as the stem/guides start wearing out quickly.As well as a DTC miss fire code. Blackstone gave me the go ahead to take this next change out to 11K miles. And I just switched from AC Delco to WIX XP oil filters.
@MVSTNGGT 5 жыл бұрын
Carl Ryan that is only the early version of the Ls7, they fixed the problem after the first model year
@johnmcdonald7006 4 жыл бұрын
Good show good quality information love it good to see Ford in top spot go Ford from Australia.
@warwolf0 5 жыл бұрын
What about the Boss302 Coyote at 7500 RPM (which I guess the new gt coyote can do)
@mr.bosstang8363 3 жыл бұрын
Before the voodoo the Roadrunner 5.0 as in The Boss was the highest.
@drgibs347 5 жыл бұрын
SHO v6 was not produced that long... Just from 1989 till 1995 not 2005. In 96 it switched from a Yamaha v6 to a duratec derived 3.4l 60* v8 where as the prior years were Yamaha designed v6's
@Jpdrums317 4 жыл бұрын
79707 was about to leave this same comment. I owned a six cylinder one, I miss that car
@michaelsarosy9210 5 жыл бұрын
The only captions I can agree with
@RafaelRibeiro-tw5uq 5 жыл бұрын
Cool videos
@johnnymadrazo1997 5 жыл бұрын
0:32 Sounds like Vtec 🤔
@elonmuskmtmt886 5 жыл бұрын
Yeah, it sure does. Must the the turbo spooling
@asingh4056 5 жыл бұрын
THATS WHAT I WAS THINKIING!!!!! I WAS INTRESTED WHY I HEARD A HONDA
@Jean_1999 5 жыл бұрын
Americans wanted to build a Honda 😂
@leviwrigley5260 5 жыл бұрын
just the cam profile i guess because vtec locks one of the valves at low rpm so its probably using 4 valves all the time
@SleeperCalais 5 жыл бұрын
The cam profiles in that engine were pretty aggressive. Makes for a lopey idle but great mid-high rpm power.
@hennessyviper 5 жыл бұрын
3:28 I was really impressed that makes me want yfind one if those cars and buy one
@potatoavacadonion1025 2 жыл бұрын
I adore the LS7, 7.0 liters of American fury with 505 hp, and it just loves to rev, even if it is 7000 rpm a simple tune to bring it to 8000 will make it sound amazing and you can supercharge them and push them beyond 700 hp stock because the internals on them are strong and can handle high power, one of my favorite engines
@ryan335 2 жыл бұрын
I was thinking about swaps lately, but kinda hypothetically. I was thinking about LS but really preferred a 2jz, but the last few days I’ve been noticing how high revving those coyotes or whatevs in some mustangs are. They’ve been sticking out to me the last few days and I think it’s speaking to me lol
@kennybailey140 4 жыл бұрын
My best friend owned a 1970 Boss 302 Mustang. The factory had a rev limiter on it that started shutting cylinders down at 6150 (+/- 50) RPM's. We disconnected it and would do 8,000 RPM hole shots. I'd speed shift it at about 7.600.
@corbetcochran5700 5 жыл бұрын
I owned a 97 cobra 4.6L that I regularly revved to 9k with no problems. It was scary fast too: flat 11@128 mph on Yokohama A520's
@TommioRS 5 жыл бұрын
LT-5 for life! By far the rarest gm v8 ever made. Also highly under rated. Probably makes 30 to 50 more hp than its rated. I love my 95 ZR-1!
@estebanamador7601 3 жыл бұрын
That Voodoo sound 😍😍😍
@pgtmr2713 5 жыл бұрын
If the Yamahas make the cut then the Ford Probe's Mazda KL should to. American car made in Flat Rock Michigan. 7500 rpm V6. That LQ1in the white Lumina sounded just wrong.
@GIGABACHI 5 жыл бұрын
First time I rode a V6 Prove I was wondering when the damn thing was going to hit redline...then again up until then I had only driven cars and trucks powered by slow&low revving/HIGH torque engines.
@pgtmr2713 5 жыл бұрын
@@GIGABACHI I love winding mine out still
@Oemg35 5 жыл бұрын
I agree I was waiting for that
@deepdiamond5045 5 жыл бұрын
US and high rev?Wow thats interesting.
@brandondannys-menary3678 5 жыл бұрын
Lol
@falconpowerful2362 5 жыл бұрын
With the Voodoo and GM's development of a rumoured 4.2L twin turbo quad-cam V8, the revs are looking to be just cranking up in the states :-) .
@raptor1513 5 жыл бұрын
How about the Ford Rs200 not a production car but Google it
@deepdiamond5045 5 жыл бұрын
@Kekistani Refugee What do you mean ??
@deepdiamond5045 5 жыл бұрын
@@raptor1513 There could be some exceptions tho' xd
@RidinDirtyRollinBurnouts 5 жыл бұрын
An honorable mention is the 4.6L 32 valve in the 2003-2004 Mach 1s which had a rev limiter at 7250 for the manual cars.
@406Steven 5 жыл бұрын
And an awesome sound to boot! Mine pulls hard right up to around 6,700 or so when the computer starts pulling timing. With some valvetrain work they'll happily run 8k+ and the manuals got the forged crank from the Cobra. But the rods are the typical, brittle modular sintered metal garbage and the block itself will start deforming around 800 HP, the old 90s Cobras and Lincoln Mk. 8s got a much stronger block.
@RidinDirtyRollinBurnouts 5 жыл бұрын
@@406Steven I believe it is the camshaft that makes power drop after 5800 rpm, the autos redlined at 6k so despite the extra rev range in the manuals it's not taken advantage of. People take the more aggressive intake cam from the 'A' head 96-98 cobra, which nets about 30whp in the 'C' head Mach1 when degreed, which also bumps the powerband higher in the rev range. Agreed though the valvetrain is very strong, I have forged bottom end with titanium valvesprings, rated for 600-700whp, the block isn't to be trusted past that. I will tell you what though, these cars love nitrous.
@406Steven 5 жыл бұрын
@@RidinDirtyRollinBurnouts I thought they kept the rev limit lower because they put the nodular iron crank from the GTs in the autos. The Cobra cam swap is an easy power adder for sure but they're getting harder to find, those who do have them want a pretty penny for them last I looked. The DOHC 4.6s sure do love nitrous and boost, though. With a little extra huff you can really break some hearts.
@RidinDirtyRollinBurnouts 5 жыл бұрын
@@406StevenThat is 100% why it has a lower rev range, I was pointing out that is the same cam profile so regardless of the rev limit difference the peak power is still around 5800. And I agree the cobra cam swaps are getting harder to find since they're not exactly shelf parts, last time I checked they were in the 3-500 dollar range, not bad if you are doing the job yourself but for most people they are likely better off shelling out for a nice cam kit and springs if they are having a shop do it for example.
@alankelter9416 4 жыл бұрын
@@RidinDirtyRollinBurnouts umm coyote!
@minimanadam 4 жыл бұрын
Quad 4 is an amazing engine Btw my 04 mini redlines at 7400. The engine is Chrysler made so it is American
@ericouellette5293 4 жыл бұрын
The 94 escort gt 1.8 I had redlined at 7,000. The highest redlined vehicle I have owned. Went pretty good for what it was.
@daze8410 3 жыл бұрын
I own an old Ford/International and an old Honda CB. My Ford never goes above 3,000 RPM, while my Honda regularly sits at 8,000+ RPM. I love having the contrast
@crazylarryjr 5 жыл бұрын
You forgot the 302 chevy from the Z-28 camaros of the late 60's ('69 i think). With a 3" stroke and a 4" bore and longer rods than the ford variant, it was a very rev happy engine. My father had a friend, that build a home made one. He used a 327 small crank journal block with a 283 crank (same bore and stroke ) and used replacement parts, from the GM parts catalog to build his. I can attest to it pegging 8,000 RPM's, without even trying. This was in the 1970's and was put in a Chevy Vega, it was the fastest car in the county by a long margin. Nobody could beat it, on the track or street. He eventually sold it and the guy paid him to install it, as he had it set up in his car. when asked how it was running, he grabbed the carb arm, rapped it hard and bent the needle on an 8,000 RPM cable drive tach. As far as i knew, every part other than the block and crank, was stock replacement for a Z-28 302. Loved the sound of that engine, will build one one day
@406Steven 5 жыл бұрын
Those old Chevy 302s were such rev-happy engines! The Ford Boss 302 and 429 SOHC engines also would have made good mention in this video, 1960s tech making huge power and high RPM.
@crazylarryjr 5 жыл бұрын
@@406Steven I agree, any short stroke American V8 would make this list
@Bc._Media 5 жыл бұрын
6:47 turn your subtitles on and it’ll say music and applause😂 which is true
@44hawk28 4 жыл бұрын
Some years ago, a fella devised a way of adapting Hemi cylinder heads to Big Block wedge Chrysler blocks. One of the engines he created was a 383 Hemi that would turn 12500 RPM and hang together just fine.
@ooohhenrybmblm 2 жыл бұрын
12,500?? 😨🤤
@captaintraction4024 5 жыл бұрын
That lt5 though... 👍
@ranou79 5 жыл бұрын
about the Quad 4 there was a W41 version where the rev limiter is at 7500 RPM and produce 190hp ;)
@kesando84 5 жыл бұрын
My two favorite quad 4 clip
@danw1955 4 жыл бұрын
Jeez, that Ford Voodoo is crazy! I wonder what the reliability factor is? I know the Coyote's are notorious for coming apart at high rpm. especially in stock trim. (usually timing chain failures).😜
@freedomisntfree_44 Жыл бұрын
No they aren’t 😂 they are known for taking down built corvettes on the stock motor though
@The-fs5wn 5 ай бұрын
Coyotes are the most durable stock engines made in a very long time. A Predator motor can handle 1400 wheel or more reliably with a stock block and crank assembly. Heads and a bigger blower is all that’s needed for some really big power. The Voodoo you just need to replace the head gaskets on models from 2015 to 2018. Those tend to blow. Otherwise the whole Coyote family is unusually strong, even more so than an LS that can’t get to 900 without experiencing reliability issues.
@waic1639 5 жыл бұрын
The Syclone V6 is a high revving engine too, I drove a Ford Transit 350 van with one that it could rev up to 7000 rpm.
@David-in7qk 5 жыл бұрын
Ty ses slovak? Koukam na tvoje videa uz dlouho, mas je super ;)
@TheMrmmkkpro 4 жыл бұрын
And may I add the 1990 ZR-1 LT5, still holds the 24 hour world speed endurance record at just under 175 mph. It broke the 50 year old record and still holds it for a mass produced production car. A showroom stock engine that was also limited to 70% of wide open throttle. It also still holds the 5000 mile and 5000 km speed records also. Several manufacturers have tried and all failed to break it with actual production cars built and released to the public. Cool stuff. 👍👍🏁
@ayushmalpeddi2793 9 ай бұрын
How cant anyone else beat the record? I'm kind of surprised...
@aaronbarnes8938 5 жыл бұрын
I'm a Mopar guy but you missed the DZ 302 Chevy. They reved into the 7,000rpm range and a lot would turn them up to 8500rpm.
@calska140 4 жыл бұрын
That quad 4 seems like a sexy little unit
@maxjonson1936 5 жыл бұрын
GM's DOHC 3.4 V6 was a very rare engine that few people knew about and even fewer ever bought.
@rickeybarnes6471 4 жыл бұрын
My 2012 Boss revs up to 7500 rpms plus and sounds great!
@jameshubbard7720 5 жыл бұрын
You didn't mention the 2 engines produced by Ford in the 60's and 70's. The Boss 302 and the small block 351 Cleveland. Both engines are extremely happy at 8000rpm and can not only Rev there but is just as happy revving at 8000rpm for extended periods of time. These engine's are happier running at 5000 to 8000rpm and we're designed to do so.
@caseystyer2996 2 жыл бұрын
The SHO only revved to 7,000 revolutions per minutes? I believe it was more than that lol.
@DukenukemX 5 жыл бұрын
Quad 4 roar.
@jessecuster5877 5 жыл бұрын
The quad 4! The ticking time bomb! At 100k blast off!
@Arrozconchopsticks 5 жыл бұрын
It's cool to hear a Mustang sound like that. Different, but good
@406Steven 5 жыл бұрын
They put unequal length headers on them to try to mimic a typical American V8 burble, otherwise they really do sing like a Ferrari V8. The combination of the two makes for an awesome and very unique sound.
@jdrok5026 5 жыл бұрын
@@406Steven no they didn't the mustang platform just doesn't fit with equal length headers and it couldn't mimic the exhaust pulses of a crossplane. Like you scientifically could never mimic a crossplane with a flat but can get close to a flat with a cross with correct headers.
@406Steven 5 жыл бұрын
@@jdrok5026 They are unequal length headers from the factory, which is where it gets its unique sound from. See the article titled "How the Shelby Mustang Got its Roar" and its interview with an actual Ford engineer if you insist on denying that fact.
@jdrok5026 5 жыл бұрын
UnsulliedSpy they dont mimic crossplane cranks that would literally make the flatplane useless
@jdrok5026 5 жыл бұрын
UnsulliedSpy also they said it was a platform issue.
@naufalabyani6314 5 жыл бұрын
That voodoo sound tho
@wvangus82 5 жыл бұрын
The GM X-code (LQ1) was a 3.4 liter DOHC 60 degree V-6 developed by GM in the late 80's to replace the aging small-block/rear drive configuration and power a modern, safe, fuel efficient, front-wheel drive muscle car for the 90's. It had a production run from 1991-1997 in various GM vehicles. When it was first developed, it had a redline of 7,000 RPM and made 280HP, emissions-certified. GM went to Hydra-Matic and gave them 2 years to make a front-drive transmission capable of holding up to 300HP. Long story short, they couldn't make it happen in the 2 years and keep each unit under budget, so they had Delphi dumb the timing and fuel down in the ECU and the engine ended up having 210HP. These motors were widely hated in their time, (hence the short production run) but I think if it could have kept it's original 280HP tune, people would have been a lot more forgiving of it's un-GM-like quirks. (like timing belts breaking at 70k miles) 210HP was still pretty good for 1991, but these cars weighed 3600 lbs, so they accelerated like a 305 Camaro!
@IIGrayfoxII 5 жыл бұрын
3:29 say good bye to this engine. Pushing it hard when cold will kill the engine And what is with 7,000rpm being classed as high revving?
@KODstorm21 5 жыл бұрын
IIGrayfoxII for older American cars it is highest than usual. I mean, my 4.6 sohc mustang cuts off at 6500
@406Steven 5 жыл бұрын
@@KODstorm21 Is that a 3 valve? My old 2 valve 4.6 was on the limiter around 6200 or so, my 4 valve is on the limiter around 7200 or so. The only real reason to run them that hard is how tall 5th gear is, with highway pulls you just run 4th until you're out of steam then it's over.
@bassembboustany 5 жыл бұрын
Man GT350's revving make me wet
@Toolaholic7 5 жыл бұрын
The LT5,not Lotus with help of Mercury Marine.Can't get parts for it anymore.The V6 SHO,had a manual transmission from the tempo/topaz that never held up
@omnipotent87 5 жыл бұрын
It may not be a production engine but where's ford cammer with its 8000 rpm rev limit.
@ephynanafamily8839 5 жыл бұрын
Voodoo engine. What an epic name. Sadly im not getting any near to any Stang roll by.
@NuclearGrizzly 5 жыл бұрын
The dealer installed Stage II (465 hp 302 ci) upgrade for the 1969 Z/28 revved to 7200 rpm. Though it has no power at all under 4000 rpm. I have one. Very difficult to drive in the street but hella fun on the track.
@DizzyMan24 5 жыл бұрын
No such engine exists. Unless, of course, Googles inability to find anything on it is false?
@NuclearGrizzly 5 жыл бұрын
@@DizzyMan24 I got it on the first try bfy.tw/L9Tf
@jdrok5026 5 жыл бұрын
@@DizzyMan24 gm offered the racing kit to racers.
@tr6864 5 жыл бұрын
Those corvette with 1st gear that can reach 60mph is hilarious. High torque. While my car need to shift to fourth gear when want to reach 60mph😌 I feel bad 😌
@medihedayati9132 4 жыл бұрын
That voodoo engine sounded insane.
@ElGuero227 5 жыл бұрын
love how this dude says voodoo lol
@zhbvenkhoReload 5 жыл бұрын
I have an HR16DE engine. Really high-revving all the time.
@terryelder9573 5 жыл бұрын
forgot the cheverolet 5.0 used on the first gen z28. 8,000 rpm redline and was also used in formula 5000
@jldude84 3 жыл бұрын
I honestly kinda prefer the Voodoo without the exhaust system. I like that low rumble.
@benjaminhartshorn2333 5 жыл бұрын
How high did the Ford 427 sohc rev and the boss 429?
driving 4 answers
Рет қаралды 1,7 МЛН
Mr Random Reviews
Рет қаралды 839 М.
Хохланд
Рет қаралды 2,5 МЛН
hotlineeon
Рет қаралды 3,1 МЛН