700hp 7.3L Powerstroke build is almost complete!

No video

700hp 7.3L Powerstroke build is almost complete!

Рет қаралды 35,228

Күн бұрын

In this video, we meet up with Mitchell and talk about his brand new engine and discuss some valvetrain modifications!
Don’t forget to check out www.Jelibuiltperformance.com for all your 7.3L Powerstroke performance and running needs!
Social media:
@97_psd
@flattydaddy7.3

Пікірлер: 70

@paulyb901 2 жыл бұрын

Great job on the build son. I’m proud of you. Keep it up and I might give you some more allowance.

@JoseRodriguez-gi3qy 2 жыл бұрын

Hello Paul

@colbybrock3170 2 жыл бұрын

Mitch we love you papi!!!!

@JoseRodriguez-gi3qy 2 жыл бұрын

Hello Colby

@moneypitprojects953 2 жыл бұрын

I love you too

@davidkeyser2419 2 жыл бұрын

@@JoseRodriguez-gi3qy 👀👀

@tylerdunn6578 2 жыл бұрын

That’s the weirdest Frankenstein I’ve ever seen, can’t wait to see if the beast runs.

@mrpzy45 2 жыл бұрын

Great video. Great engine. Respect for modifying the engine. Things I wish I was able to do to my truck.

@loganlr5986 2 жыл бұрын

The best part of this vid is Mitch’s beautiful face😍

@moneypitprojects953 2 жыл бұрын

You mean his rear 🥲

@davidkeyser2419 2 жыл бұрын

I’ve heard that’s quite the setup!!🔥

@The73Garage 2 жыл бұрын

I know a guy!🤘🏼

@jaketrat3725 2 жыл бұрын

Absolutely love the videos something so relaxing about listening to you talk about all this technical shit which I don’t even completely understand

@luisdasilva2324 2 жыл бұрын

Can’t wait to see the running videos 🖤🖤

@The73Garage 2 жыл бұрын

Neither can I!

@jairoorellana2087 2 жыл бұрын

Great video bro

@The73Garage 2 жыл бұрын

Thank you!

@edwardman1742 Жыл бұрын

As a 6.0 guy, I greatly approve of this build. 😊 7.3 power 💪🏼

@francishartman7749 2 жыл бұрын

Nice build!!

@The73Garage 2 жыл бұрын

She came along nicely!

@WhiteYetiAK Жыл бұрын

That's awesome! I wish I could do that with all 3 of my trucks.

@mitchellgertner9543 2 жыл бұрын

From one Mitchell to another… nice

@JoseRodriguez-gi3qy 2 жыл бұрын

Daddy Mitchy 🥵🥵🥵🥵🥵🥵

@JCCustomsCNC 2 жыл бұрын

BADASS DUDES!!

@nicholasmarioncunstruction 2 жыл бұрын

More videos please

@The73Garage 2 жыл бұрын

I plan on it!

@davidpaulfox3449 Жыл бұрын

I wish I could talk to you or text you some stuff about my truck when I get ready to do my truck 😊

@MC_7.3 2 жыл бұрын

Mitchypoo 😍

@JoseRodriguez-gi3qy 2 жыл бұрын

Mc squared 😙

@gromit848 2 жыл бұрын

That's a nice 5 ton

@7.3sareslow34 2 жыл бұрын

Ayyy its mitchchchchchch🥵🥵🥵

@ford4296 Жыл бұрын

bad ass build man. who makes the valve covers ?? id like to get a set

@The73Garage Жыл бұрын

I think they’re PSP diesel, they’re NOT cheap lol They do look slick!

@taylormckeel7160 2 жыл бұрын

That thing thing is goin to be scary but goals lol what stage Trans does he have in it

@colbybrock3170 2 жыл бұрын

This one is a manual truck

@badbrothersgarage9887 2 жыл бұрын

Hell yea

@AustenARW 2 жыл бұрын

He needs his own KZfaq channel!

@jaketrat3725 2 жыл бұрын

We been sayin this for a while

@francishartman7749 2 жыл бұрын

Great Build! Quick question, I am doing the T4 Build on my 7.3 which intercooler do you guys recommend? Thanks!!

@The73Garage 2 жыл бұрын

I have a mishimoto SD cooler, little pricey but it’s sweet. You could always run an factory SD intercooler as well.

@francishartman7749 2 жыл бұрын

@@The73Garage Thanks I was looking into the Mishimoto, you can't beat lifetime warranty.

@AnnaMariaIslandFishersandFun 2 жыл бұрын

How much to build my motor

@evadmullek 11 ай бұрын

I am curious, how is it that your "Piston Tops" are copper Colored? It it some kind of Copper plating or surface protection (ie. teflon) ??? Thanks :o)

@capacious1288 7 ай бұрын

Anything you’d do differently a year later?

@midnightsnakeboa 2 жыл бұрын

how many miles to a gallon you get with a build like that

@Ajsatter1995 2 жыл бұрын

Did you guys fill the block with concrete? How’s she holding up?

@The73Garage 2 жыл бұрын

We did not, holding up solid!

@Ajsatter1995 2 жыл бұрын

Nice man, what do you think the threshold would be for a stock block before it should need to be filled? Or is that just controlled by cylinder pressure in the tuning? Too much down low cause the block to crack? Just curious as my spare block is on the stand and I want to start building it for a moderate 600hp perhaps but I want it to be bullet proof as shit. Ik some guys fill there’s but not entirely sure when that becomes a necessity.

@Ajsatter1995 2 жыл бұрын

@@The73Garage I’m aware I will need billet rods so I don’t bend my factory forged rods but I really don’t want to go through all that just to crack a block

@jacobn516 2 жыл бұрын

I'm looking to get 450 or 500 horsepower out of mine. Would that call for any major engine work?

@therealaustinbrown2712 2 жыл бұрын

Depends on how you drive but id say yes to be safe. Head studs, valves springs, and pushrods. Thats what i would do "internally" to get to that power safely and "reliably" And if you got a stock truck you are looking at 10k and up to get to that kinda power.(new stuff) And that's not including trans. Just a fyi. You gotta pay to play!

@jacobn516 2 жыл бұрын

@@therealaustinbrown2712 i have a built trans already, chip, cold air intake and boost fuller. Looking to get the electric fuel kit, new injectors, and turbo. Ill probably stop there. I just want a good running truck nothing to crazy like yall do lol.

@truckerlifegaines1634 Жыл бұрын

How much to do this build

@gonzo116p 7 ай бұрын

What’s a motor like this cost

@Rednecks239 2 жыл бұрын

dual hpops sheee333eesh!

@markclough9000 2 жыл бұрын

Make sure you replace the rockers so you don't break one like you did...Remember when I told you replace your rockers and then you broke one.. still waiting for your engine to go boom since you didn't take it out and put concrete halfway up the block..

@bradithompson3904 2 жыл бұрын

What dip stick tube us on that engine im building a similar set up with riff raff valve cover and the stock mount dose not fit on them?

@markclough9000 2 жыл бұрын

horsepower is always double with the 7.3 1400 ft lb

@too-stoked-about-2-strokes 2 жыл бұрын

What exactly is the spring washer you mentioned on the lifter retainer plate? I'm in the process of putting together a very similar "the works” 7.3 build and don't want to miss anything.

@The73Garage 2 жыл бұрын

That washer provides a certain amount of pressure similar to a locking washer on the 8mm bolt for the lifters. It’s a small detail and I would hate to see the consequences of not having it on there!

@raylangodsey7784 Жыл бұрын

Who does ur custom tunes jelibuilt? I have a 97 crew cab I need tuned and anyone local in flordia that does dyno

@The73Garage Жыл бұрын

Yes, @jelibuilt tunes my truck!

@WaterandWoodsmen 2 жыл бұрын

You guys going to bamboo?

@The73Garage 2 жыл бұрын

I’m not, not sure if Mitch is!

@justinowens9323 2 жыл бұрын

So what’s the difference in the power stroke 7.3 and the 7.3 idi is it true that the bottom ends are the same and that you could build the idi into a power stroke ?

@anthonyburkman2463 2 жыл бұрын

What chip or programmer will he be running?

@The73Garage 2 жыл бұрын

Hydra chip with Jelibuilt tuning!

@bbeenecs 2 жыл бұрын

What would this cost me?

@markclough9000 2 жыл бұрын

Full Force diesel sucks.. should have went with unlimited diesel.. probably got tuned by Brian and I bet your transmission bangs like a mother after you got to keep going back and getting revisions..