8 Wera Tools You CAN'T Live Without

Рет қаралды 72,917

7 ай бұрын

These are the top 8 tools from Wera. Wera tools are some of the best tools I have ever used. The Wera Zyklops and Wera bit check are a match made in heaven. Make sure to check out Wera tools if you haven't already!
Wera chisel driver: amzn.to/3LMO2re
Wera screwdriver set: amzn.to/3Q3sYzc
Wera screw holder: amzn.to/46yOvG5
Wera multi driver: amzn.to/45o1Orj
Wera Zyklops: amzn.to/46q2RbK
Wera sockets: amzn.to/3RL0ZFJ
Wera Zyklops Pocket set: amzn.to/3tkxBfB
Wera bit check: amzn.to/45lABFL
Wera joker wrench: amzn.to/3rFc8gG
Knipex Wire Strippers
amzn.to/3IdccbL
Wera Screwdriver Set
amzn.to/41dSfKP
Veto Pro Pac Tool Pouch
amzn.to/3Ijv2hs
My Merch:
www.bonfire.com/american-elec...
Support The Channel:
gofund.me/b9d86784
#wera #werascrewdrivers #electricianstools

Пікірлер: 66

@deathstr0kexorn765 4 күн бұрын

817R I use every day, fantastic short screwdriver with the extension built in

@flat4- 2 ай бұрын

Some years ago I did specialized work on wind turbines, oil rigs and industrial plants; No matter what, a chisel driver, tool check plus and some knipex pliers always went with me.

@VX3800 Ай бұрын

I bought a tool check plus set and keep it in my 97 Impreza. Very cool little set, very useful in case you need it

@taytgoverdik2791 7 ай бұрын

I love my Wera VDE joker set, amazing spanners honestly

@MackLife87 7 ай бұрын

Yea I got a lot of tool in my cart cuz of you, keep up the feed bro, thanks

@petermikus2363 7 ай бұрын

I wera much can live without em

@JackElectrician 7 ай бұрын

Awesome Videos 👍🏿

@renesalinas9491 5 ай бұрын

instead of the bitset I use the tool check plus. thumbs up

@JustTim484 7 ай бұрын

Just got the special edition Japanese market drivers from Wera. Same etching on the tips. But also has ball grips like Vessel and whatnot. Not insulated. But seriously great. My insulated drivers. I’ve got the stainless steel ones because of the humidity in Florida. They’re the only tools I have that have no effects from the humidity. And the jokers. I have the SAE ratcheting ones. Easily the best wrenches I’ve ever owned.

@KaBoOM444 7 ай бұрын

The colours are different on the square ones because robertsons are colour coded - yellow for #0 (typically #4 screws), green for #1 (#6 screws), red for #2 (#8 and #10), black for #3 (#12 screws). As an electrician you'd pretty much only see green and red, though some of the larger PVC boxes up here (like, 12" x 12" from Carlon) use black. Not sure about america, since I've noticed you guys sometimes use torx in places where we'd have a robbie fastener - but hooray, at least it's not phillips!

@widescreen247 7 ай бұрын

6.5 mm insulated flathead screwdriver and 3.5mm insulated terminal screw driver are my most used tools. I have the wera electrician maintenance driver kit as well, which I use quite frequently

@markpinther9296 24 күн бұрын

Multi driver is part of EDC. I didn’t realize the driver portion could be removed but I don’t think it’s impact rated. I could be wrong. Also had never heard of the chisel type screw drivers so thanks for that.

@Corbinthadude 5 ай бұрын

I wanted to by the 1/4 Zyklop but I want to fit it in my little case. Can you let me know how long the racket is? My case is 7 inches inside. For the quick version not the pocket

@ElectricFrito 7 ай бұрын

Love the vid I definitely love their bottle openers as well!

@gerhardesterhuizen7097 Ай бұрын

Have 8 different colours

@erincook6007 4 ай бұрын

I like the Wiha strike top screwdrivers better. Slightly bigger cap that doesn’t show impact marks as fast and made in Germany not Czech Republic.

@toddwest6711 7 ай бұрын

Need those wrenches

@gregoryderosa8045 5 ай бұрын

Just get a kinipexs plier wrench 🔧

@louisvl10 Ай бұрын

my old trusty flathead is some random noname thing passed down from my dad. it just wont break. also has this hexagonal part for torquing with a wrench. it doesnt have that metal end you can beat a hammer on tho. got a philips one like that, too.

@cerealkiller4248 Ай бұрын

I have one too which I found somewhere. It’s a DIY superstore brand, it sits alongside my Klein/Knipex gear and is my most used tool 😳😳

@jamespyle531 26 күн бұрын

do you work at witron/wios?

@tsetsivito 2 ай бұрын

Wera screwdrivers- big yes.Rest is a bit questionable.

@americanelectrician 2 ай бұрын

The screwdrivers are my favorite

@pyrounlimited7035 Ай бұрын

Wera Hex plus allen keys in metric ofcourse.

@balinoob1837 7 ай бұрын

You should seriously consider the Wera allen keys they have patented technology

@cerealkiller4248 Ай бұрын

The Wera etched tips were the biggest lie ever claimed by a tool manufacturer. No noticeable difference between them and any other driver I have. The only good thing is they were short and they fitted in my new too bag I had at the time ( I had mine 8/9 years ago ). The difference size handles were awful, my Klein all have the same size grip, once you get used to that it’s hard to go back and try to exert a force with a skinny handle. I have Fatmax, Irazola, Klein, Armeg, Wiha, Wera so have plenty to compare them to.

@elliotkane4443 7 ай бұрын

Lol, we were walking down the haul road today under a bridge, there's a cable tray been installed on one side running along the footing. Noticed a giant pile of broken cable ties, really small screws, cut insulation, no heat shrink. Must be sparkies. I wish you sparkies did a review on vaccuum cleaners or brooms, shovels or something more appropriate.

@mustardcrumbles 7 ай бұрын

Used Wera insulated screwdrivers for a short time , really really didn't like them , found the tips not long lasting and the handles were awful , far too large and the widest part in the wrong place , I like Wiha, Stanley fatmax and Bahco vde ergo . The Bahco is my the best screwdriver set I have ever used as a spark , honestly leagues above other brands

@narutobroken 6 ай бұрын

Agreed on the screwdrivers, they’re just uncomfortable in the hand, I think they are made for a specific hand size and if you are anything other than that too bad

@Adam-ro8vj 6 ай бұрын

Pb Swiss 👍

@dennisfabian2570 4 ай бұрын

Yeah why are they all so big and heavy..

@dennisfabian2570 4 ай бұрын

Perfect for the beater/chisel though.. tough as.. got it since years

@fatfuzzypotato6113 4 ай бұрын

I love the wera screwdrivers but I got some particularly large hands so they fit my hand great not an electrician though I bought a set so I don’t mark up any holes or parts while putting in a screw (I work in car restoration) I have proto, craftsman, snapon, Mac, matco, wiha and various others I guess I’m one of the lucky ones they fit

@louisvl10 Ай бұрын

somehow Wera's precision kits aren't as solid as their usual size screwdrivers. ive seen lots of reviews with pics of broken off flathead tips.

@jasonlawrence4916 4 ай бұрын

Why does nobody call the square bit a Robertson? Is that a Canadian thing only?

@cccccc9929 9 күн бұрын

I bet yes. I'm from Germany and I never saw such thing in my whole life. I'm 40.

@oldschoolfoil2365 6 ай бұрын

If wera tools came with a hard case for their storage instead of a fabric roll where parts fall out all over the jobsite and go missing they would have a winning product especially for the price they charge. how hard is it for them to make a blow moulded quality hard case? Get it sorted

@americanelectrician 6 ай бұрын

All my stuff ends up in a tool bag anyway

@oldschoolfoil2365 6 ай бұрын

As a Luthier, I treat my tools my knives and my fine musical instruments separate in hard case storage. you don't throw throw multiple fine instruments in a cloth bag banging around before you turn up to play at the orchestra @@americanelectrician

@AntonioJay1204 17 күн бұрын

It's a German company, and it's pronounced as "Vera," like Volkswagen pronunciated as Volksvagen.

@VictorGarciaR 6 ай бұрын

Wera goes on and on about ergonomics, but I just do not like their handles. Wiha or hazet or bahco are just better. They have pear-shaped handles that fit my hand better

@theduffman441 3 ай бұрын

I think he left the security tag on his hat... He really should have asked the clerk to remove it

@americanelectrician 3 ай бұрын

Hahahaha close. It’s my mic

@paytoncash3285 4 ай бұрын

I think their black and yellow are esd safe

@paytoncash3285 4 ай бұрын

But that may be wiha, I can't remember

@Kor-HVAC_Technician Ай бұрын

모자이쁘다

@americanelectrician Ай бұрын

Thank you🙌🏼

@David-dp2gh Ай бұрын

smalles screw driver in the set does not come with the great features as the big ones...

@michaelfairchild 2 ай бұрын

Ive replaced my cheaper "Made in China" hand tools to Wiha, Wera and Knipex. Love all of them, but my bank account doesnt.

@americanelectrician 2 ай бұрын

The bank account never really loved anything

@7duke77 Ай бұрын

Not that I like being "that guy" but here goes. Wera is a German company and as such, the W is pronounced like a V. So while the name is spelled Wera, it is pronounced Vera. Great vid though, appreciate all the details!

@Henry_Swanson 7 ай бұрын

It slices, it dices, it sponsored this video.

@americanelectrician 7 ай бұрын

No one sponsored this video

@rmack9226 Ай бұрын

ROBINSON NOT SQUARE

@bigp2487 Ай бұрын

Literally the same thing even the packaging refers to it as square 😂

@rmack9226 Ай бұрын

@@bigp2487 yes because so many people incorrectly call it square that the manufacturer just gave up and gave in and calls it square. But it's ROBINSON.

@chasechase4138 29 күн бұрын

Robertson?

@rmack9226 29 күн бұрын

@@chasechase4138 robinson man

@chasechase4138 28 күн бұрын

@@rmack9226 robertson.