Рет қаралды 4,472
80 mm multi stone hoing mandrel
A honing mandrel is a tool commonly used in machining processes to improve the surface finish and dimensional accuracy of bores or cylindrical holes. It typically consists of a cylindrical body with a central bore, where the workpiece is mounted, and one or more abrasive stones or sleeves attached to its outer surface.
The purpose of a honing mandrel is to remove any remaining imperfections, such as tool marks, burrs, or surface irregularities, left after initial machining operations like drilling or boring. By rotating the mandrel within the workpiece and applying pressure, the abrasive stones or sleeves make contact with the inner surface, gradually smoothing and refining it.
An "80 mm multi stone honing mandrel" suggests that the mandrel has a diameter of 80 mm, and it features multiple abrasive stones or sleeves attached to its outer surface. The inclusion of multiple stones allows for increased efficiency and potentially the ability to achieve different levels of surface finish or accommodate varying bore sizes.
Please note that without further specific details or context, this is a general description, and the actual design or features of an "80 mm multi stone honing mandrel" may vary based on its manufacturer or specific application.
#80 mm multi stone hoing mandrel
#honing
# • 80 mm multi stone hoin...
Regenerate response