85 Celica 22RE - Cold Start Injector, ECT, TPS, VAF, IAT Testing [Beau's First Time Driving a Stick]

Рет қаралды 8,147

Күн бұрын

1985 Toyota Celica GT 22RE critical sensor input circuit testing
00:00 - 22RE engine diagnostics
00:22 - cold start injector description, operation and testing
10:45 - start of rich condition troubleshooting
11:30 - coolant temperature sensor testing
15:11 - Vane Airflow Meter Testing (VAF/MAF)
20:30 - idle contact switch and TPS test
21:40 - test drive with my son Beau
22:46 - Beau's first time driving a stick
ScannerDanner Tools:
www.scannerdanner.com/tools.html
www.amazon.com/shop/scannerda...
For more information on this topic, I have written a “field manual” called Engine Performance Diagnostics which is available at www.scannerdanner.com as an eBook or paper book.
Want even more diagnostic training? Whether you are a DIY trying to fix your own car, someone looking to become an auto technician, or a current auto technician that wants to get more into diagnostics, subscribe to ScannerDanner Premium www.scannerdanner.com/join-sc... There is a 14 day free trial.
On ScannerDanner Premium I will bring you right into my classroom at Rosedale Technical College. You will find page for page lectures taken right from my book as well as exclusive classroom type case studies. What is so special about these classroom case studies? I pull live problem vehicles directly into my classroom and we troubleshoot them in real time, using and applying the theory and testing procedures we learn during the classroom lectures. There is no better on-line training of how to troubleshoot automotive electrical and electronics systems anywhere!
Disclaimer:
Due to factors beyond the control of ScannerDanner LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ScannerDanner LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ScannerDanner LLC recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ScannerDanner LLC, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ScannerDanner LLC.

Пікірлер: 62

@artvance8251 9 күн бұрын

Watching and laughing , these are memories that will be with you a lifetime with your boys.

@ScannerDanner 9 күн бұрын

I hope so my friend. And the beautiful thing is it is captured on video for them to watch and laugh when I'm gone

@robertsmith2956 9 күн бұрын

all my kids learned on my hydraulic stick shift. Then they got the advanced training on the f100 column shift, cable clutch and 100 ft long. LOL Had a very nice nose scrapper hill to practice starting on.

@todayintheshopbanksy5904 7 күн бұрын

Watching Beau drive was so cool. Great fun learning to drive. Love you guys.

@01FozzyS 9 күн бұрын

Those last 6 minutes were the best. Good job,Beau!

@herrkiwi3110 8 күн бұрын

Where was this video like 30 years ago 🙂 ???? I had a cold start fault on a Toyota Cressida 1GE engine that used to flood badly on cold start up. Thanks so much as always for such a helpful video and simple explanation of these systems and how they actually worked. I used to think I was stupid as I could never understand a lot of electrical diagrams but the way you explain them Paul I realize I just needed the right teacher to help me understand. Paul as always I can't thank you enough.

@ScannerDanner 8 күн бұрын

Thank you so much for that compliment my friend. It means a lot

@johnaclark1 8 күн бұрын

I had that same car in college. That drive brought back some great memories! Good job, Beau!

@cullenmiller8170 8 күн бұрын

That brings back memories of teaching my daughter to drive a manual transmission. I was glad when she got her Mini Cooper and wasn’t abusing my brand new Passat. 😂

@hughkoontz2166 7 күн бұрын

Good times! Going to teach my boys how to drive my MR2 5 speed this summer🎉

@milesmahan 4 күн бұрын

Come for the knowledge , stay for the humble

@blakestone8088 8 күн бұрын

When you couldn't find why it was running rich I thought of what I believe is a problem I have Either the "EVAC is Open or a Bad Hose allowing Air into the system" Glad it Worked for Bo to have a little fun thx Guys

@canadiantrucker9574 9 күн бұрын

Scotty Approved

@ScannerDanner 8 күн бұрын

😅

@isalmankhan1 9 күн бұрын

Oh Boy Finally😍😍😍 Thanks SD for sharing👍🏻👍🏻👍🏻 Stay Blessed Danner Family🙏🏻🙏🏻🙏🏻

@billdeibner7105 9 күн бұрын

I had one of these for 18 years, great car 🙂

@nancylewis7142 9 күн бұрын

I'm addicted to your videos SD.

@ScannerDanner 8 күн бұрын

🤩

@djosbun 8 күн бұрын

Bo knows happiness! 😁

@jameswhite1752 8 күн бұрын

Their is a back feed. He is right on connector colors and how easy it is, to plug wrong connector into wrong component. I learned this the hard way.

@GeminiSeven43 8 күн бұрын

Great Job Beau!!!! and I was getting stressed by your Dad's help so you handled it well. Once you get the hang of the throttle and clutch you will rock the celica. Every car is different and it takes a few miles for experts to dial in a good shift. I was lucky to have my early years learning on old Uhaul trucks where I worked. I can't wait to see you fix up the celica.

@nandor690 5 күн бұрын

It’s so fun to see Bau driving. When I started watching you he was just a little kid. Sorry if I spelled his name wrong 🙈

@ScannerDanner 5 күн бұрын

Thanks so much man. You've been with me a long time then! 2012 was my first YT video. And yes Beau is how it's spelled

@nandor690 5 күн бұрын

@@ScannerDanner the 2003 Suzuki Aerio checking timing with a scope was the first video I ever saw of yours.iv been hooked ever since

@Bwelsh1981 8 күн бұрын

Dude, when you plugged the wrong plug back into the cold start injector...for 1 second I'm like WTF is he doing? Then you called yourself a Dumbass, 😂 AND I felt better😅. Great Video. I love old Toyotas. Knowing you, this is your in your wheelhouse for sure. Great Job Beau!

@ScannerDanner 8 күн бұрын

😂 that was intentional as the time switch isn't working and I needed the extra fuel. What I called myself a dumb dumbass about was forgetting to plug the distributor pickup back in Thanks buddy!

@Bwelsh1981 8 күн бұрын

@@ScannerDanner oohhh. Ok. I missed that part🙄😅

@tomcarrigan902 6 күн бұрын

Great family video

@jerrym6735 8 күн бұрын

Perfect car to learn how to drive manual...!!! They are fun to drive , I still drive mine every day.

@Pablo_Automotive 7 күн бұрын

Thanks team Danner 😊

@user-io3hw7hx7q 9 күн бұрын

Awesome Outstanding job thanks

@dfields9511 9 күн бұрын

another great vid, and fond memories made. I had my own on my 1977 Celica with 20R engine

@johnchambers12 9 күн бұрын

That is why I believe young drivers should learn to drive first, before learning how to drive a standard transmission. Good video! I went thru that with my now ex-wife and my buddies at school. I found a hilly housing development to teach stick faster. Up hill to a Stop Sign.

@KStewart-th4sk 5 күн бұрын

Well i grew up on the farm and everything was standard transmission. First one i drove was the old Chev. one ton truck with my Mom for guidance. Took my driving test in a 3 on the tree Ford Galaxie. First time the guy failed me for downshifting in the middle of a turn. Well, that's the way Dad always did it so i did too. Nope, you had to downshift before making the turn according to the instructor, vehicle had to be "in control". Meanwhile i had parallel parked perfectly, got failed for the downshift and he claimed i wasn't close enough to the curb at a Stop sign----claimed a bicyclist could have got by. I thought he was full of it on that last one because i knew i was supposed to be close. No point in arguing. Passed the second time i took the test. It was many years before Dad bought anything with an automatic transmission.

@dannielpizatto7357 8 күн бұрын

Hi Paul, as an owner of a Chevrolet (Opel) Omega 1994, i’ve been pretty intimate of these vane air flow sensors. I was completely against messing its internals but as its computer were calibrated for e20 and we are getting closer to e30 30 years later, I decided to take a shot. After some fiddling and checking o2 and integrators, i’ve sticked to 4 clicks on loose direction. The car responds so much better now. If the track is not worn, it works pretty well considering the age Nice moments with your kids. Miss my dad when he let me drive barely having the height to see above the Dashboard.

@fredflintstone8048 9 күн бұрын

Driving a stick is just muscle training. Everyone struggles at first coordinating everything. It comes natural in time and you don't even think about it anymore. Nice rundown on the components of the old 22RE computer control and some of the troubleshooting. One of the frustrating things about these ECUs is that they don't store any fault data, so the only error blink codes you're going to get out of it are the errors it can determine with the key on, engine off. Problems you have only when the engine is running cannot be diagnosed with the blink codes so you have to get good at reading and interpreting the analog signals being fed into the computer real time.

@rodvan-zeller6360 8 күн бұрын

The most common issue with intermittent rich running when coming to a stop on those models was a TPS sticking.

@dfields9511 8 күн бұрын

It came with Anti theft device is installed It’s called a stick shift Lol

@Embermist69 7 күн бұрын

I know for me personally, I really learned how to drive stick was in a semi. Nice thing with a semi is all the torque. You don’t have to worry about giving a little throttle to keep from stalling out. One day I’ll practice more then I have a few times in a gas engine to be more proficient. I think I could handle the synchronizers going out. I float the gear in a semi. Have been known to use the clutch when needed in down shifts. 🙃

@KStewart-th4sk 5 күн бұрын

I assume you are talking diesel if it's a semi---more popular engine than gas. In a semi, i think the governor in the diesel injection pump is the main reason for it being hard to stall.

@Nimbus. 8 күн бұрын

hell yes

@GroundedDiagnostics 9 күн бұрын

😀😀👍👍 Brilliant

@MrFmccarty 9 күн бұрын

Dang I’m all grins my favorite car ever my 1984 Toyota Celica gts black package.

@throttlebottle5906 9 күн бұрын

hopefully he gets the hang of the manual trans, before eating clutches. 🤣 I'm still a bit jerky a driver at times, when my leg is bugging me. but it's sure not from slipping it!

@KAMNC 7 күн бұрын

I think driving a dirtbike or atv with a clutch is a good way to learn the process

@TheFlyingMechanicDIY 9 күн бұрын

Is it possible because the cold start injector was ON the entire time caused the rich condition, but only became excessive rich when the car got to the operating temp, u got what i mean !

@ScannerDanner 9 күн бұрын

No, because I left it unplugged on our first test drive and all other times we drove it

@keithstroud2908 5 күн бұрын

I think you had the wrong plug on the cold start injector during your first test drive. Then you changed it for your second one. Check the tape… I could be wrong? My wife says it happens..

@ScannerDanner 5 күн бұрын

@@keithstroud2908 nope, never drove it with any plug connected to the cold start injector

@428dragpak 9 күн бұрын

22RE,. any small bock Chevy, 3800v6. Any carbureted inline 6 all a pleasure to work on

@michaelgleason4791 9 күн бұрын

Learning to drive stick in the hills of Pittsburgh is just evil 😂😂😂

@ScannerDanner 8 күн бұрын

😂 right?

@richardcranium5839 9 күн бұрын

those flapper style air meters were prone to sticking. i swear they were made by a swiss watchmaker. my buddy had one that because of the inlet wouds suck snow in the winter time and it would freeze.

@CajunShrek 7 күн бұрын

Lost art 25:09 any enjoyment

@SixFive8 7 күн бұрын

Hi Paul. Do you come out to Ma? Im in search of a diagnosis on my 5.4 3v Triton. If not, is there anyone out this way you can refer me too? Thank you.

@ScannerDanner 6 күн бұрын

I do not but you may find a good shop here. scannerdanner.com/find-sd-shops.html

@SixFive8 6 күн бұрын

@@ScannerDanner Hi Paul. I just reached out to Abimgton (Ma) Sunoco Auto and Tire. He's the closest to me from your list of Massachusetts ScannerDanner Trained. Thank you!