A quick on-ramp pull from about 30-80 mph. The rest of the video is just cruising. Link to Build Thread: fordsix.com/threads/95-f150-t... Link to original video: • 95 F150 300 4.9 Inline...
Пікірлер: 171
@itsahellofaname3 жыл бұрын
That's cool how you talked Michael J. Fox into holding the camera for you.
@dirtydiesel89983 жыл бұрын
😂😂that’s messed up but it’s funny
@Snow-vo1yi3 жыл бұрын
Lmfao
@MarcusRHill-kk6bw3 жыл бұрын
Lmfao
@stevewalker4123 жыл бұрын
So wrong ..... but funny...
@ForgotteMemories1013 жыл бұрын
I'm fucking dead lmao
@kbeam4188 жыл бұрын
Got a 93 f150 4.9, with 295 on her. Best car I've ever owned. It's basically a diesel engine that takes gas, I think that's the reason why these last so long.
@chrish50964 жыл бұрын
Kevin Beam that and stock they really don’t make enough power to even hurt themselves lol
@aaronhumphrey20093 жыл бұрын
Actually, its a modified tractor engine..always been a gas/kerosene engine..low compression, low stress, gear driven cam..not a lot to go wrong.. These go 250-350,000 miles easily if maintained
@mitch95212 жыл бұрын
Overbuilt, underpowered, brutally simple.
@ollyboo Жыл бұрын
@@aaronhumphrey2009uh oh, my 92 f150 4.9 has 230,000 miles
@gojiraforbreakfast10 ай бұрын
@@ollybooI have 530k on mine. Still has great compression. 1978 f100
@jamesballew50015 жыл бұрын
Pretty cool. Recognized the road right away. Cool truck.
@johntaurus53997 жыл бұрын
That's awesome, I found a 1961 F-100 Unibody with an I-6. I think a turbo EFI 300/4.9L I-6 would be great in it, with Crown Vic P71 suspension, rear axle, etc. I love Inline 6s!
@nazimelon66538 жыл бұрын
manual F150 I6? this car is god.
@Project-gr6zy4 жыл бұрын
I have a manual f250 4.9 i6 with 4x4 t18 and 4 low soon wanting to order a gear vendor od
@jamesshaw49543 жыл бұрын
My 95 4.9 had manual but motor was knocking and it was rusted so I had to let it go wouldn't ever buy another 4.9
@Terminxman3 жыл бұрын
@@Project-gr6zy with how expensive gear vendors are I'd look into adapting a 5 speed into it
@Project-gr6zy3 жыл бұрын
@@Terminxman I need the granny low for towing since I tow over GCVWR
@Project-gr6zy3 жыл бұрын
@@Terminxman takes a a good bit of feathering to start moving and having an overdrive granny helps so it's not as big a jump to 1st
@alpzepta3 жыл бұрын
This is only the truck I would never need a V8. I love the big Inline 6 like this without a Diesel money
@GasGuzler9 ай бұрын
Thing is absolutely awesome, any chance we could get some new videos of it? I’d love to hear what the exhaust sounds like and how you have the turbo set up.
@ReptiFilmsWJN9 жыл бұрын
Awesome man! My plans soon!
@bygibzoh36523 жыл бұрын
I would call this truck the “90s ecoboost” lol I fucking love this why pay 60+k for a turbo truck when you could pay not even a quarter of that and get a real mans 5 speed Manuel
@jedisentinel14995 жыл бұрын
oooooooh that's a pretty sounding 6
@damienmintertheghostrider77653 жыл бұрын
That Truck Is A Beast
@daumination2478 жыл бұрын
I've read the thread. Do you have final steps that you took that you can write out and post? Would greatly appreciate it. Interested in doing something similar to my '91 300 i6
@damiandelapp54903 жыл бұрын
Can you imagine if these engines had a decent dual overhead cam flow through head with direct injection
@nathand75603 жыл бұрын
Not as big but a 4 litre Barra is the best your going to get 👍
@HolyThunder4602 жыл бұрын
Direct injection is nothing but a waiting repair bill
@RollingRigTraction2 жыл бұрын
Just a solid cross flow head would do, screw the injection. If you want boost just run a Predator Carburetor. 12.5:1 AFR and nothing to mess with for induction.
@RollingRigTraction2 жыл бұрын
@@HolyThunder460 FINALLY! SOMEONE WITH A BRAIN!
@sategllib21912 жыл бұрын
The direct injection doesn't add power really, just barely any mpg. Wish my 2.0 liter Ecoboost had port and direct injection, gonna add port injection eventually to get me over 400hp at the wheels
@anon589736 жыл бұрын
That is so sick. What are you doing for engine management? Megasquirt?
@alexhuerta21288 жыл бұрын
around how much did you spend on this build i want to do this to mine
@cb25366 жыл бұрын
Greenville, yeah man. Spartanburg here.
@juiceboxhero63915 жыл бұрын
Thought I recognized it.. Go Tigers!
@charlesangell_bulmtl4 жыл бұрын
GODDAMN that thing runs like a V8!!!
@Thinker6695 жыл бұрын
It's fast with that turbo.
@dustinshadle7323 жыл бұрын
a slighly smaller hybrid turbo for the 5.0 mustang crowd would actually improve those numbers. its sitting with an impeller housing and all for an engine with 60cid more, and being diesel, more output of exhaust from each power cycle. still, you can live like that until you wanna drop 800 into a turbo and tinker time
@drremulack61968 жыл бұрын
I have a 96 f 250.... I pull a camper. what size turbo do you have?
@tannersanborn61478 жыл бұрын
I have a 1993 ford f150 I was wondering what turbo u had used I have thought about doing this to my 300 in 6. of u don't mind I would like to know how much this cost u to do this?
@Drake51533 жыл бұрын
@@trevorburnette4385 build thread is gone or the link doesn't work
@agustoarvizu70505 жыл бұрын
Nice truck... How many miles to the gallon?
@kristopherevans69318 жыл бұрын
where did you get the turbo attachment for the 300 inline and what turbo did you use
@wantahertzdonut4 жыл бұрын
Ahh yes..the random-number-generator-steering of OBD Ford trucks. Brings back memories.
@ChiefLightning96 жыл бұрын
Take that thing to the meets on Saturday nights in the sears parking lot at west gate mall
@mackenziematthews34889 жыл бұрын
I have an 88 with the 300 and I really want to do this to my truck I was wondering how hard the parts were to come across and how much did it all run u
@xanderkresh89623 жыл бұрын
The parts seem readily available online these days, depending on if you know the name of the part you want specifically.
@sailingradmode9473 Жыл бұрын
What kind of gas mileage are you getting with the turbo in versus before the turbo?
@bobbyanger17802 жыл бұрын
I got a few questions how big of turbo what did you have to do to install a turbo and is the motor stock
@ArmyOfNVA2 жыл бұрын
How much would it cost me to build a turbo 300, i have an 83 f150 with a 300 and im considering doing something like this
@HufflerGarage4 жыл бұрын
Very nice...just might have to do the same to mine.
@lazarusmagellan23673 жыл бұрын
At like 2-3k rpm it sounds like a cummins, has the same hum and the little “beat” of the 6 cylinder
@ericross50183 жыл бұрын
Same firing order
@rannz83 жыл бұрын
Do you still have this truck? I want to know if it's worth doing to mine.
@marckemp9955 Жыл бұрын
What rods did you use? Factory are forged but for turbo and high RPM the Chevy 292 are better.
@drremulack61968 жыл бұрын
I have a Mitsubishi fuso turbo I am looking to spool @ 1200 -3500 rpm. do you think I can get some pointers
@drremulack61968 жыл бұрын
Thanks a lot.... I will keep you updated
@norman_sage25285 жыл бұрын
Cool!
@calebposton23495 ай бұрын
did you have to do anything internally to thr engine? or is this jsut bolt on.
@peytonjt9113 жыл бұрын
What turbo kit did you go with? I got a 95' f150 300 I6 5 speed as well
@MrPoppaGeorgio3 жыл бұрын
I have this same truck. I love these trucks!
@corkdecoys16 жыл бұрын
my f150 broke down at :59 on the side of the road
@Nater-zq5yh5 жыл бұрын
but thats a ranger...
@junksmasher7776 жыл бұрын
What do I have do to turbo my 4.9, I just rebuilt the motor less than 2.000 miles ago
@monelfunkawitz39664 жыл бұрын
Put a turbo and a megasquirt on it.
@PreacherDan3 жыл бұрын
Is this truck still running? I’m curious about your setup.
@michaelgrossman50593 жыл бұрын
Commented to keep up to date. I have a stock 300 i6 manual 96 f150. My grampa bought it new my mom drove it for years and it's been mine for years. I'm doing a timing gear change fixing the ac. I'ma make it like new. Currently around 170k miles. Also just installed a 5th wheel hitch.
@the_fonz_hd27022 жыл бұрын
@@michaelgrossman5059 you should add a turbo like this, you can find Cummins turbos on eBay for like $300, you might have to change some stuff around but it'd be a good upgrade
@flatheadfletch2 жыл бұрын
Mines a 96 with 5 speed. Put 3” exhaust and 70 series Flowmaster and 3:31 ring n pinion. It gets 17-23 mpg and 11-13 when towing a 5000 lb camper. 290,000 original miles. It’s flawless in performance. Why bother with any other mods. I’m 61 and have done muscle builds on 302’s and others. This is the best setup I have ever owned. Traded in my 2020 Toyota Trd for this truck at 260,000 miles. I wish I bought this truck new in 96. I’d have a million miles on it. It’s freaking a blast to drive and a real work horse !
@mesothelioma50243 жыл бұрын
You have to upgrade any internals?
@coyote1020768 жыл бұрын
Just got back from a 3 day camping trip. Pulled my 4,980 lb camper over some decent hills this time, , , , , , , , at 40 MPH ! I need to either turbo my 6, or do a 460 BB swap. I have a like new HX35 turbo sitting on my parts shelf I picked up for almost nothing a few years back. My truck is a 1994 Ext. Cab 2WD woth the E40D automatic and 3.08:1 rear gears. RUST FREE and (mostly) dent free and paid off!!! So I would really like to just keep going with the truck I have vs. buying a bigger truck. My question is: Do you think would be better off adding a turbo to mu 300 - 6, or go with a 460 big block swap. Should net about the same HP/TQ if my calculations are right. (at 7psi boost) Thanks for any "best guess" opinions!
@coyote1020768 жыл бұрын
Thanks! I will go the 460 BB route. LOL
@briteRedaz167 жыл бұрын
@COYOTE ADVENTURES I would also recommend lowering your rear axle ratio.. and take advantage of all that torque the inline 6 produces.. if losing mpg is not an issues.. just my 2 cents
@dgsmith66825 жыл бұрын
Change the gears to 3.73 and swap in a manual.... It will pull
@RollingRigTraction2 жыл бұрын
Just change you axle gearing to a lower ratio, or when you tow swap to smaller tires; poor man's underdrive...2WD you have plenty of options without over revving or putting your highway RPM's too high. Either way, when an engine has to work less your fuel economy is always better. I would swap the camshaft and possibly port the head and get bigger valves before going to boost personally, unless you already have a boatload of parts from other projects.
@zangoofsgeerage57508 ай бұрын
This was my original plan with my 300. Do a decent cam and turbo setup with a zf5. Unfortunately I don’t have my 300 anymore😢
@t-dougz60505 ай бұрын
TREVOR DID U HAVE TO DO ANYTHING LIKE A COMPUTERED OR DYNO TUNE AFTER TURBO KIT INSTALL OR DID U JUST ADJUST CARB AND IT WAS GOOD
@butters50983 жыл бұрын
What was your top speed even with the turbo
@deakenm334 жыл бұрын
How much weight were you hauling?
@dillonellis37637 жыл бұрын
@trevor brunette I have a few questions for you as to your build I've been looking every where how to do this I have a 96 f150 4.9 96k miles and want to throw a turbo on this if you have pictures or anything that could help id greatly appreciate it!
@AdBul_7 жыл бұрын
he has his build thread linked to the desctription
@rodolforios28306 жыл бұрын
Dillon Ellis 7
@turkfebruary58363 жыл бұрын
What kind of power does it make?
@mattcampbell57782 жыл бұрын
Where did you get the turbo kit for this I'm rebuilding my 4.9 right now and what did you do to it besides the turbo? Plz send me list of things to do while I have mine out.
@elbydimmel6680 Жыл бұрын
Fr though
@trickmytruck324 жыл бұрын
What kind of numbers u making u think
@rowdywilliams90188 жыл бұрын
what kind of gas mileage are you getting with that turbocharged 300?
@adamcousins24594 жыл бұрын
2.5 Gallons/mile
@TylerGibsonMusic4 жыл бұрын
Adam Cousins lol probably. Mines stock and gets terrible gas mileage. But worth it!
@betogray97654 жыл бұрын
Probably round 50 or so smiles per gallon
@clarkeboss10722 жыл бұрын
You dont tyrbo a truck for better gas mileage you turbo it for the driving experience
@buttonysquare850110 ай бұрын
A stock one is about the same as a small block v8 like the 302
@steveaird93473 жыл бұрын
I wish I still had my 300 cubic inch inline 6 engine
@TMKCreationsOfficial2 жыл бұрын
Literally sounds like a 12v
@sniperNghillie979 жыл бұрын
Does that turbo add a lot of power?
@sniperNghillie979 жыл бұрын
Trevor Burnette Does it throw you back in your seat pretty good? I mean do you get power top end too or is it the same bottom end power
@Bassingtv3 жыл бұрын
Sounds like a damn cummins
@rise2live8 жыл бұрын
how much mpg
@TylerGibsonMusic5 жыл бұрын
Steady Vibin My stock 92 with a 300i6 gets HORRIBLE mpg... I can only imagine! Great truck either way!
@smoakster38 жыл бұрын
what boost/psi are you pushing to that stock block?
@smoakster38 жыл бұрын
+Trevor Burnette thanks for replying buddy, love the truck, do they actually sell a turbi manifold? or did you wanna just save by making your own
@BeamerTheFox2 жыл бұрын
its turbo lmao thats so nasty :D !
@Tylnorton5 жыл бұрын
Did you cut off that car before lane merge at 0:39? lmao
@Tylnorton5 жыл бұрын
@@trevorburnette4385 Damn man haha.
@BandPGarage8 жыл бұрын
Is this Greenville SC?
@BandPGarage8 жыл бұрын
+Trevor Burnette I live in Spartanburg lol... I'm going to start on my turbo build for my 300 i6 soon for my 68 f100... You go to cars and coffee or any car meets?
@BandPGarage8 жыл бұрын
+Trevor Burnette that's the only cars and coffee I know of is that one.... we have a pretty big meet down here in Spartanburg on Saturday nights that includes lots of "Mexico" activities lol
@noahboren5370 Жыл бұрын
What type of turbo do you have
@user-ib2vv8ww4m Жыл бұрын
What’s the turbo kit?
@Tjs_powersports7 жыл бұрын
im gonna turbo my 94 f150 300ci
@speeedy954 жыл бұрын
I'm going to do twin turbochargers on my 95 5.0 f150 with the 4r70w.
@quincyj38 жыл бұрын
Has your mpg dropped?
@randombk828948 жыл бұрын
+quincyj3 it should be better if you keep it in vacuum, but thats prob not easy
@STR8SICCC Жыл бұрын
*What transmission?*
@karlschauff79893 жыл бұрын
The real ecoboost.
@mattparra59388 жыл бұрын
What transmission you got on it ?
@rustykrys8888 жыл бұрын
I'm gonna try this on the old truck I have at the farm. Lol
@thomascrotty83312 жыл бұрын
My dad's f150 would shake if you went past the speedometer. But it was only 80mph lol
@dianebenson6658 жыл бұрын
Hey, Bro, What an awesome wind up!!! Any plans for the 300 beyond today? oh, b.t.w. the whole 2 of the down thumb chumps were those bowed tie idjits you dusted ass on , remember? That s
@louiswestfall96227 жыл бұрын
How is your engine surviving that turbo?
@louiswestfall96227 жыл бұрын
Saul Jerez Too much boost combined with improper fueling will destroy it quickly.
@louiswestfall96227 жыл бұрын
Saul Jerez hence the reason for my question.
@AdBul_7 жыл бұрын
he has megasquirt on it. That and the 300 has forged internals stock and it will last as long as most of stock NA engines if he doesnt go to like 30psi. i think he has it set up at 8psi.
@bcubed727 жыл бұрын
FWIW, I hope he upgraded the injectors. Injectors co0me close to maxing out on a NA 300 with a decent "tune." Stock, he'd be running lean under boost.
@CHEPEX10248 жыл бұрын
hey man I have a 91 ford f150 inline 6 5 speed but the clutch are dang hard to push, but the cluch looks like no stock one, I saw the transmission and cluch are new but something are in between pushing the clucth, and it's not original
@CHEPEX10248 жыл бұрын
Ohh I will take a picture man and I email to you, cuz I am not mechanic I know a litte
@CHEPEX10248 жыл бұрын
+Trevor Burnette Hey man the clucth will have a air pump ?
@treechildu.s.a19532 жыл бұрын
I’m in your are j would like to see that thing
@andrewcostel4821Ай бұрын
This is how ford shoudve made the ecoboost engines
@millerbob9186 жыл бұрын
As shitty as those roads are I'd think you were in Oklahoma lol
@pcox86006 жыл бұрын
God don't get me started.
@jam7sam8466 жыл бұрын
lmao i know right, we get a new suspension every year lol
@millerbob9186 жыл бұрын
lol I wish they would fix them Im tired of dodging pot holes when im on my bike
@dillonellis37637 жыл бұрын
*burnette
@unleashtheanimals5 жыл бұрын
Askin a bit much out of the m50d lol
@Poorboyzgarage4474 жыл бұрын
Ittl handle it
@PaulSmith-tf9bn Жыл бұрын
I'll send my truck to you, to be worked on, as I would like to go 80
@samphelps39773 жыл бұрын
Sounds like a dump truck
@timteevin45173 жыл бұрын
Tangled in traffic. Couldn't see much performance.
@jacobeldredge8037 жыл бұрын
You ever tow with it?
@majikfuzzybutt73907 жыл бұрын
Every time I tell someone that a inline six will provide more torque they tell me , I am crazy, 300 inline six or 302 v8,
@jonah.c.strickland84007 жыл бұрын
I have both and have built both ! 300 6cyl in the right hands will smoke a 302 on low end torque
@4everun224 жыл бұрын
Poor engine. Such a good boy treated bad.
@chrisperry17563 жыл бұрын
Imagine putting on a 4” turbo back and an 8” tip on here just to see if it would sound like a Cummins.
@RollingRigTraction2 жыл бұрын
That's gay as fuck. Whoever came up with the gigantic exhaust tips should be scourged.